diff options
| -rw-r--r-- | Documentation/hwmon/adp1050.rst | 64 | ||||
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/adp1050.c | 58 |
5 files changed, 134 insertions, 0 deletions
diff --git a/Documentation/hwmon/adp1050.rst b/Documentation/hwmon/adp1050.rst new file mode 100644 index 000000000000..8fa937064886 --- /dev/null +++ b/Documentation/hwmon/adp1050.rst @@ -0,0 +1,64 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver adp1050 +===================== + +Supported chips: + + * Analog Devices ADP1050 + + Prefix: 'adp1050' + + Addresses scanned: I2C 0x70 - 0x77 + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf + +Authors: + + - Radu Sabau <radu.sabau@analog.com> + + +Description +----------- + +This driver supprts hardware monitoring for Analog Devices ADP1050 Digital +Controller for Isolated Power Supply with PMBus interface. + +The ADP1050 is an advanced digital controller with a PMBus™ +interface targeting high density, high efficiency dc-to-dc power +conversion used to monitor system temperatures, voltages and currents. +Through the PMBus interface, the device can monitor input/output voltages, +input current and temperature. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate +the devices explicitly. +Please see Documentation/i2c/instantiating-devices.rst for details. + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + +Sysfs Attributes +---------------- + +================= ======================================== +in1_label "vin" +in1_input Measured input voltage +in1_alarm Input voltage alarm +in2_label "vout1" +in2_input Measured output voltage +in2_crit Critical maximum output voltage +in2_crit_alarm Output voltage high alarm +in2_lcrit Critical minimum output voltage +in2_lcrit_alarm Output voltage critical low alarm +curr1_label "iin" +curr1_input Measured input current. +curr1_alarm Input current alarm +temp1_input Measured temperature +temp1_crit Critical high temperature +temp1_crit_alarm Chip temperature critical high alarm +================= ======================================== diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 1ca7a4fe1f8f..9a4fd576e6f6 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -33,6 +33,7 @@ Hardware Monitoring Kernel Drivers adm1266 adm1275 adm9240 + adp1050 ads7828 adt7410 adt7411 diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 557ae0c414b0..38e794d83cc3 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -57,6 +57,16 @@ config SENSORS_ADM1275 This driver can also be built as a module. If so, the module will be called adm1275. +config SENSORS_ADP1050 + tristate "Analog Devices ADP1050 digital controller for Power Supplies" + help + If you say yes here you get hardware monitoring support for Analog + Devices ADP1050 digital controller for isolated power supply with + PMBus interface. + + This driver can also be built as a module. If so, the module will + be called adp1050. + config SENSORS_BEL_PFE tristate "Bel PFE Compatible Power Supplies" help diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index f14ecf03ad77..95a8dea5e5ed 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_ACBEL_FSG032) += acbel-fsg032.o obj-$(CONFIG_SENSORS_ADM1266) += adm1266.o obj-$(CONFIG_SENSORS_ADM1275) += adm1275.o +obj-$(CONFIG_SENSORS_ADP1050) += adp1050.o obj-$(CONFIG_SENSORS_BEL_PFE) += bel-pfe.o obj-$(CONFIG_SENSORS_BPA_RS600) += bpa-rs600.o obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o diff --git a/drivers/hwmon/pmbus/adp1050.c b/drivers/hwmon/pmbus/adp1050.c new file mode 100644 index 000000000000..0a49bea8e13b --- /dev/null +++ b/drivers/hwmon/pmbus/adp1050.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Hardware monitoring driver for Analog Devices ADP1050 + * + * Copyright (C) 2024 Analog Devices, Inc. + */ +#include <linux/bits.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include "pmbus.h" + +static struct pmbus_driver_info adp1050_info = { + .pages = 1, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_VOLTAGE_OUT] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_TEMPERATURE] = linear, + .func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_IIN | PMBUS_HAVE_TEMP + | PMBUS_HAVE_STATUS_TEMP, +}; + +static int adp1050_probe(struct i2c_client *client) +{ + return pmbus_do_probe(client, &adp1050_info); +} + +static const struct i2c_device_id adp1050_id[] = { + {"adp1050", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, adp1050_id); + +static const struct of_device_id adp1050_of_match[] = { + { .compatible = "adi,adp1050"}, + {} +}; +MODULE_DEVICE_TABLE(of, adp1050_of_match); + +static struct i2c_driver adp1050_driver = { + .driver = { + .name = "adp1050", + .of_match_table = adp1050_of_match, + }, + .probe = adp1050_probe, + .id_table = adp1050_id, +}; +module_i2c_driver(adp1050_driver); + +MODULE_AUTHOR("Radu Sabau <radu.sabau@analog.com>"); +MODULE_DESCRIPTION("Analog Devices ADP1050 HWMON PMBus Driver"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); |