diff options
31 files changed, 775 insertions, 481 deletions
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index 10fde58d0869..aec2cd2aaea7 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -347,81 +347,8 @@ for tickless systems. It follows the same basic strategy as the ``menu`` `one <menu-gov_>`_: it always tries to find the deepest idle state suitable for the given conditions. However, it applies a different approach to that problem. -First, it does not use sleep length correction factors, but instead it attempts -to correlate the observed idle duration values with the available idle states -and use that information to pick up the idle state that is most likely to -"match" the upcoming CPU idle interval. Second, it does not take the tasks -that were running on the given CPU in the past and are waiting on some I/O -operations to complete now at all (there is no guarantee that they will run on -the same CPU when they become runnable again) and the pattern detection code in -it avoids taking timer wakeups into account. It also only uses idle duration -values less than the current time till the closest timer (with the scheduler -tick excluded) for that purpose. - -Like in the ``menu`` governor `case <menu-gov_>`_, the first step is to obtain -the *sleep length*, which is the time until the closest timer event with the -assumption that the scheduler tick will be stopped (that also is the upper bound -on the time until the next CPU wakeup). That value is then used to preselect an -idle state on the basis of three metrics maintained for each idle state provided -by the ``CPUIdle`` driver: ``hits``, ``misses`` and ``early_hits``. - -The ``hits`` and ``misses`` metrics measure the likelihood that a given idle -state will "match" the observed (post-wakeup) idle duration if it "matches" the -sleep length. They both are subject to decay (after a CPU wakeup) every time -the target residency of the idle state corresponding to them is less than or -equal to the sleep length and the target residency of the next idle state is -greater than the sleep length (that is, when the idle state corresponding to -them "matches" the sleep length). The ``hits`` metric is increased if the -former condition is satisfied and the target residency of the given idle state -is less than or equal to the observed idle duration and the target residency of -the next idle state is greater than the observed idle duration at the same time -(that is, it is increased when the given idle state "matches" both the sleep -length and the observed idle duration). In turn, the ``misses`` metric is -increased when the given idle state "matches" the sleep length only and the -observed idle duration is too short for its target residency. - -The ``early_hits`` metric measures the likelihood that a given idle state will -"match" the observed (post-wakeup) idle duration if it does not "match" the -sleep length. It is subject to decay on every CPU wakeup and it is increased -when the idle state corresponding to it "matches" the observed (post-wakeup) -idle duration and the target residency of the next idle state is less than or -equal to the sleep length (i.e. the idle state "matching" the sleep length is -deeper than the given one). - -The governor walks the list of idle states provided by the ``CPUIdle`` driver -and finds the last (deepest) one with the target residency less than or equal -to the sleep length. Then, the ``hits`` and ``misses`` metrics of that idle -state are compared with each other and it is preselected if the ``hits`` one is -greater (which means that that idle state is likely to "match" the observed idle -duration after CPU wakeup). If the ``misses`` one is greater, the governor -preselects the shallower idle state with the maximum ``early_hits`` metric -(or if there are multiple shallower idle states with equal ``early_hits`` -metric which also is the maximum, the shallowest of them will be preselected). -[If there is a wakeup latency constraint coming from the `PM QoS framework -<cpu-pm-qos_>`_ which is hit before reaching the deepest idle state with the -target residency within the sleep length, the deepest idle state with the exit -latency within the constraint is preselected without consulting the ``hits``, -``misses`` and ``early_hits`` metrics.] - -Next, the governor takes several idle duration values observed most recently -into consideration and if at least a half of them are greater than or equal to -the target residency of the preselected idle state, that idle state becomes the -final candidate to ask for. Otherwise, the average of the most recent idle -duration values below the target residency of the preselected idle state is -computed and the governor walks the idle states shallower than the preselected -one and finds the deepest of them with the target residency within that average. -That idle state is then taken as the final candidate to ask for. - -Still, at this point the governor may need to refine the idle state selection if -it has not decided to `stop the scheduler tick <idle-cpus-and-tick_>`_. That -generally happens if the target residency of the idle state selected so far is -less than the tick period and the tick has not been stopped already (in a -previous iteration of the idle loop). Then, like in the ``menu`` governor -`case <menu-gov_>`_, the sleep length used in the previous computations may not -reflect the real time until the closest timer event and if it really is greater -than that time, a shallower state with a suitable target residency may need to -be selected. - +.. kernel-doc:: drivers/cpuidle/governors/teo.c + :doc: teo-description .. _idle-states-representation: diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 7a7d4b041eac..d5043cd8d2f5 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -365,6 +365,9 @@ argument is passed to the kernel in the command line. inclusive) including both turbo and non-turbo P-states (see `Turbo P-states Support`_). + This attribute is present only if the value exposed by it is the same + for all of the CPUs in the system. + The value of this attribute is not affected by the ``no_turbo`` setting described `below <no_turbo_attr_>`_. @@ -374,6 +377,9 @@ argument is passed to the kernel in the command line. Ratio of the `turbo range <turbo_>`_ size to the size of the entire range of supported P-states, in percent. + This attribute is present only if the value exposed by it is the same + for all of the CPUs in the system. + This attribute is read-only. .. _no_turbo_attr: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt deleted file mode 100644 index 897eedfa2bc8..000000000000 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt +++ /dev/null @@ -1,57 +0,0 @@ -NVIDIA Tegra Activity Monitor - -The activity monitor block collects statistics about the behaviour of other -components in the system. This information can be used to derive the rate at -which the external memory needs to be clocked in order to serve all requests -from the monitored clients. - -Required properties: -- compatible: should be "nvidia,tegra<chip>-actmon" -- reg: offset and length of the register set for the device -- interrupts: standard interrupt property -- clocks: Must contain a phandle and clock specifier pair for each entry in -clock-names. See ../../clock/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - actmon - - emc -- resets: Must contain an entry for each entry in reset-names. See -../../reset/reset.txt for details. -- reset-names: Must include the following entries: - - actmon -- operating-points-v2: See ../bindings/opp/opp.txt for details. -- interconnects: Should contain entries for memory clients sitting on - MC->EMC memory interconnect path. -- interconnect-names: Should include name of the interconnect path for each - interconnect entry. Consult TRM documentation for - information about available memory clients, see MEMORY - CONTROLLER section. - -For each opp entry in 'operating-points-v2' table: -- opp-supported-hw: bitfield indicating SoC speedo ID mask -- opp-peak-kBps: peak bandwidth of the memory channel - -Example: - dfs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp@12750000 { - opp-hz = /bits/ 64 <12750000>; - opp-supported-hw = <0x000F>; - opp-peak-kBps = <51000>; - }; - ... - }; - - actmon@6000c800 { - compatible = "nvidia,tegra124-actmon"; - reg = <0x0 0x6000c800 0x0 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_ACTMON>, - <&tegra_car TEGRA124_CLK_EMC>; - clock-names = "actmon", "emc"; - resets = <&tegra_car 119>; - reset-names = "actmon"; - operating-points-v2 = <&dfs_opp_table>; - interconnects = <&mc TEGRA124_MC_MPCORER &emc>; - interconnect-names = "cpu"; - }; diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml new file mode 100644 index 000000000000..e3379d106728 --- /dev/null +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/devfreq/nvidia,tegra30-actmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra30 Activity Monitor + +maintainers: + - Dmitry Osipenko <digetx@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + - Thierry Reding <thierry.reding@gmail.com> + +description: | + The activity monitor block collects statistics about the behaviour of other + components in the system. This information can be used to derive the rate at + which the external memory needs to be clocked in order to serve all requests + from the monitored clients. + +properties: + compatible: + enum: + - nvidia,tegra30-actmon + - nvidia,tegra114-actmon + - nvidia,tegra124-actmon + - nvidia,tegra210-actmon + + reg: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: actmon + - const: emc + + resets: + maxItems: 1 + + reset-names: + items: + - const: actmon + + interrupts: + maxItems: 1 + + interconnects: + minItems: 1 + maxItems: 12 + + interconnect-names: + minItems: 1 + maxItems: 12 + description: + Should include name of the interconnect path for each interconnect + entry. Consult TRM documentation for information about available + memory clients, see MEMORY CONTROLLER and ACTIVITY MONITOR sections. + + operating-points-v2: + description: + Should contain freqs and voltages and opp-supported-hw property, which + is a bitfield indicating SoC speedo ID mask. + + "#cooling-cells": + const: 2 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interconnects + - interconnect-names + - operating-points-v2 + - "#cooling-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/memory/tegra30-mc.h> + + mc: memory-controller@7000f000 { + compatible = "nvidia,tegra30-mc"; + reg = <0x7000f000 0x400>; + clocks = <&clk 32>; + clock-names = "mc"; + + interrupts = <0 77 4>; + + #iommu-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + + emc: external-memory-controller@7000f400 { + compatible = "nvidia,tegra30-emc"; + reg = <0x7000f400 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 57>; + + nvidia,memory-controller = <&mc>; + operating-points-v2 = <&dvfs_opp_table>; + power-domains = <&domain>; + + #interconnect-cells = <0>; + }; + + actmon@6000c800 { + compatible = "nvidia,tegra30-actmon"; + reg = <0x6000c800 0x400>; + interrupts = <0 45 4>; + clocks = <&clk 119>, <&clk 57>; + clock-names = "actmon", "emc"; + resets = <&rst 119>; + reset-names = "actmon"; + operating-points-v2 = <&dvfs_opp_table>; + interconnects = <&mc TEGRA30_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst index 18ae21bf7f92..d6bf84f061f4 100644 --- a/Documentation/power/runtime_pm.rst +++ b/Documentation/power/runtime_pm.rst @@ -378,7 +378,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: `int pm_runtime_get_sync(struct device *dev);` - increment the device's usage counter, run pm_runtime_resume(dev) and - return its result + return its result; + note that it does not drop the device's usage counter on errors, so + consider using pm_runtime_resume_and_get() instead of it, especially + if its return value is checked by the caller, as this is likely to + result in cleaner code. `int pm_runtime_get_if_in_use(struct device *dev);` - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the @@ -827,6 +831,15 @@ or driver about runtime power changes. Instead, the driver for the device's parent must take responsibility for telling the device's driver when the parent's power state changes. +Note that, in some cases it may not be desirable for subsystems/drivers to call +pm_runtime_no_callbacks() for their devices. This could be because a subset of +the runtime PM callbacks needs to be implemented, a platform dependent PM +domain could get attached to the device or that the device is power managed +through a supplier device link. For these reasons and to avoid boilerplate code +in subsystems/drivers, the PM core allows runtime PM callbacks to be +unassigned. More precisely, if a callback pointer is NULL, the PM core will act +as though there was a callback and it returned 0. + 9. Autosuspend, or automatically-delayed suspends ================================================= diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index b6a782c31613..ab0b740cc0f1 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -379,6 +379,44 @@ err: return ret; } +static int genpd_set_performance_state(struct device *dev, unsigned int state) +{ + struct generic_pm_domain *genpd = dev_to_genpd(dev); + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + unsigned int prev_state; + int ret; + + prev_state = gpd_data->performance_state; + if (prev_state == state) + return 0; + + gpd_data->performance_state = state; + state = _genpd_reeval_performance_state(genpd, state); + + ret = _genpd_set_performance_state(genpd, state, 0); + if (ret) + gpd_data->performance_state = prev_state; + + return ret; +} + +static int genpd_drop_performance_state(struct device *dev) +{ + unsigned int prev_state = dev_gpd_data(dev)->performance_state; + + if (!genpd_set_performance_state(dev, 0)) + return prev_state; + + return 0; +} + +static void genpd_restore_performance_state(struct device *dev, + unsigned int state) +{ + if (state) + genpd_set_performance_state(dev, state); +} + /** * dev_pm_genpd_set_performance_state- Set performance state of device's power * domain. @@ -397,8 +435,6 @@ err: int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) { struct generic_pm_domain *genpd; - struct generic_pm_domain_data *gpd_data; - unsigned int prev; int ret; genpd = dev_to_genpd_safe(dev); @@ -410,16 +446,7 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state) return -EINVAL; genpd_lock(genpd); - - gpd_data = to_gpd_data(dev->power.subsys_data->domain_data); - prev = gpd_data->performance_state; - gpd_data->performance_state = state; - - state = _genpd_reeval_performance_state(genpd, state); - ret = _genpd_set_performance_state(genpd, state, 0); - if (ret) - gpd_data->performance_state = prev; - + ret = genpd_set_performance_state(dev, state); genpd_unlock(genpd); return ret; @@ -572,6 +599,7 @@ static void genpd_queue_power_off_work(struct generic_pm_domain *genpd) * RPM status of the releated device is in an intermediate state, not yet turned * into RPM_SUSPENDED. This means genpd_power_off() must allow one device to not * be RPM_SUSPENDED, while it tries to power off the PM domain. + * @depth: nesting count for lockdep. * * If all of the @genpd's devices have been suspended and all of its subdomains * have been powered down, remove power from @genpd. @@ -832,7 +860,8 @@ static int genpd_runtime_suspend(struct device *dev) { struct generic_pm_domain *genpd; bool (*suspend_ok)(struct device *__dev); - struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + struct gpd_timing_data *td = &gpd_data->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; @@ -889,6 +918,7 @@ static int genpd_runtime_suspend(struct device *dev) return 0; genpd_lock(genpd); + gpd_data->rpm_pstate = genpd_drop_performance_state(dev); genpd_power_off(genpd, true, 0); genpd_unlock(genpd); @@ -906,7 +936,8 @@ static int genpd_runtime_suspend(struct device *dev) static int genpd_runtime_resume(struct device *dev) { struct generic_pm_domain *genpd; - struct gpd_timing_data *td = &dev_gpd_data(dev)->td; + struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev); + struct gpd_timing_data *td = &gpd_data->td; bool runtime_pm = pm_runtime_enabled(dev); ktime_t time_start; s64 elapsed_ns; @@ -930,6 +961,8 @@ static int genpd_runtime_resume(struct device *dev) genpd_lock(genpd); ret = genpd_power_on(genpd, 0); + if (!ret) + genpd_restore_performance_state(dev, gpd_data->rpm_pstate); genpd_unlock(genpd); if (ret) @@ -968,6 +1001,7 @@ err_stop: err_poweroff: if (!pm_runtime_is_irq_safe(dev) || genpd_is_irq_safe(genpd)) { genpd_lock(genpd); + gpd_data->rpm_pstate = genpd_drop_performance_state(dev); genpd_power_off(genpd, true, 0); genpd_unlock(genpd); } @@ -2505,7 +2539,7 @@ EXPORT_SYMBOL_GPL(of_genpd_remove_subdomain); /** * of_genpd_remove_last - Remove the last PM domain registered for a provider - * @provider: Pointer to device structure associated with provider + * @np: Pointer to device node associated with provider * * Find the last PM domain that was added by a particular provider and * remove this PM domain from the list of PM domains. The provider is diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index c6c218758f0b..cd08c5885190 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -252,6 +252,7 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, /** * _default_power_down_ok - Default generic PM domain power off governor routine. * @pd: PM domain to check. + * @now: current ktime. * * This routine must be executed under the PM domain's lock. */ diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index b570848d23e0..8a66eaf731e4 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -345,7 +345,7 @@ static void rpm_suspend_suppliers(struct device *dev) static int __rpm_callback(int (*cb)(struct device *), struct device *dev) __releases(&dev->power.lock) __acquires(&dev->power.lock) { - int retval, idx; + int retval = 0, idx; bool use_links = dev->power.links_count > 0; if (dev->power.irq_safe) { @@ -373,7 +373,8 @@ static int __rpm_callback(int (*cb)(struct device *), struct device *dev) } } - retval = cb(dev); + if (cb) + retval = cb(dev); if (dev->power.irq_safe) { spin_lock(&dev->power.lock); @@ -446,7 +447,10 @@ static int rpm_idle(struct device *dev, int rpmflags) /* Pending requests need to be canceled. */ dev->power.request = RPM_REQ_NONE; - if (dev->power.no_callbacks) + callback = RPM_GET_CALLBACK(dev, runtime_idle); + + /* If no callback assume success. */ + if (!callback || dev->power.no_callbacks) goto out; /* Carry out an asynchronous or a synchronous idle notification. */ @@ -462,10 +466,7 @@ static int rpm_idle(struct device *dev, int rpmflags) dev->power.idle_notification = true; - callback = RPM_GET_CALLBACK(dev, runtime_idle); - - if (callback) - retval = __rpm_callback(callback, dev); + retval = __rpm_callback(callback, dev); dev->power.idle_notification = false; wake_up_all(&dev->power.wait_queue); @@ -484,9 +485,6 @@ static int rpm_callback(int (*cb)(struct device *), struct device *dev) { int retval; - if (!cb) - return -ENOSYS; - if (dev->power.memalloc_noio) { unsigned int noio_flag; diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c index 8e021082dba8..3bad3266a2ad 100644 --- a/drivers/base/power/wakeirq.c +++ b/drivers/base/power/wakeirq.c @@ -182,7 +182,6 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) wirq->dev = dev; wirq->irq = irq; - irq_set_status_flags(irq, IRQ_NOAUTOEN); /* Prevent deferred spurious wakeirqs with disable_irq_nosync() */ irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY); @@ -192,7 +191,8 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq) * so we use a threaded irq. */ err = request_threaded_irq(irq, NULL, handle_threaded_wake_irq, - IRQF_ONESHOT, wirq->name, wirq); + IRQF_ONESHOT | IRQF_NO_AUTOEN, + wirq->name, wirq); if (err) goto err_free_name; diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 802abc925b2a..cbab834c37a0 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -1367,9 +1367,14 @@ static int cpufreq_online(unsigned int cpu) goto out_free_policy; } + /* + * The initialization has succeeded and the policy is online. + * If there is a problem with its frequency table, take it + * offline and drop it. + */ ret = cpufreq_table_validate_and_sort(policy); if (ret) - goto out_exit_policy; + goto out_offline_policy; /* related_cpus should at least include policy->cpus. */ cpumask_copy(policy->related_cpus, policy->cpus); @@ -1515,6 +1520,10 @@ out_destroy_policy: up_write(&policy->rwsem); +out_offline_policy: + if (cpufreq_driver->offline) + cpufreq_driver->offline(policy); + out_exit_policy: if (cpufreq_driver->exit) cpufreq_driver->exit(policy); diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c index da717f7cd9a9..1570d6f3e75d 100644 --- a/drivers/cpufreq/cpufreq_stats.c +++ b/drivers/cpufreq/cpufreq_stats.c @@ -211,7 +211,7 @@ void cpufreq_stats_free_table(struct cpufreq_policy *policy) void cpufreq_stats_create_table(struct cpufreq_policy *policy) { - unsigned int i = 0, count = 0, ret = -ENOMEM; + unsigned int i = 0, count; struct cpufreq_stats *stats; unsigned int alloc_size; struct cpufreq_frequency_table *pos; @@ -253,8 +253,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy) stats->last_index = freq_table_get_index(stats, policy->cur); policy->stats = stats; - ret = sysfs_create_group(&policy->kobj, &stats_attr_group); - if (!ret) + if (!sysfs_create_group(&policy->kobj, &stats_attr_group)) return; /* We failed, release resources */ diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 0e69dffd5a76..6012964df51b 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -121,9 +121,10 @@ struct sample { * @max_pstate_physical:This is physical Max P state for a processor * This can be higher than the max_pstate which can * be limited by platform thermal design power limits - * @scaling: Scaling factor to convert frequency to cpufreq - * frequency units + * @perf_ctl_scaling: PERF_CTL P-state to frequency scaling factor + * @scaling: Scaling factor between performance and frequency * @turbo_pstate: Max Turbo P state possible for this platform + * @min_freq: @min_pstate frequency in cpufreq units * @max_freq: @max_pstate frequency in cpufreq units * @turbo_freq: @turbo_pstate frequency in cpufreq units * @@ -134,8 +135,10 @@ struct pstate_data { int min_pstate; int max_pstate; int max_pstate_physical; + int perf_ctl_scaling; int scaling; int turbo_pstate; + unsigned int min_freq; unsigned int max_freq; unsigned int turbo_freq; }; @@ -366,7 +369,7 @@ static void intel_pstate_set_itmt_prio(int cpu) } } -static int intel_pstate_get_cppc_guranteed(int cpu) +static int intel_pstate_get_cppc_guaranteed(int cpu) { struct cppc_perf_caps cppc_perf; int ret; @@ -382,7 +385,7 @@ static int intel_pstate_get_cppc_guranteed(int cpu) } #else /* CONFIG_ACPI_CPPC_LIB */ -static void intel_pstate_set_itmt_prio(int cpu) +static inline void intel_pstate_set_itmt_prio(int cpu) { } #endif /* CONFIG_ACPI_CPPC_LIB */ @@ -467,6 +470,20 @@ static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) acpi_processor_unregister_performance(policy->cpu); } + +static bool intel_pstate_cppc_perf_valid(u32 perf, struct cppc_perf_caps *caps) +{ + return perf && perf <= caps->highest_perf && perf >= caps->lowest_perf; +} + +static bool intel_pstate_cppc_perf_caps(struct cpudata *cpu, + struct cppc_perf_caps *caps) +{ + if (cppc_get_perf_caps(cpu->cpu, caps)) + return false; + + return caps->highest_perf && caps->lowest_perf <= caps->highest_perf; +} #else /* CONFIG_ACPI */ static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) { @@ -483,12 +500,146 @@ static inline bool intel_pstate_acpi_pm_profile_server(void) #endif /* CONFIG_ACPI */ #ifndef CONFIG_ACPI_CPPC_LIB -static int intel_pstate_get_cppc_guranteed(int cpu) +static inline int intel_pstate_get_cppc_guaranteed(int cpu) { return -ENOTSUPP; } #endif /* CONFIG_ACPI_CPPC_LIB */ +static void intel_pstate_hybrid_hwp_perf_ctl_parity(struct cpudata *cpu) +{ + pr_debug("CPU%d: Using PERF_CTL scaling for HWP\n", cpu->cpu); + + cpu->pstate.scaling = cpu->pstate.perf_ctl_scaling; +} + +/** + * intel_pstate_hybrid_hwp_calibrate - Calibrate HWP performance levels. + * @cpu: Target CPU. + * + * On hybrid processors, HWP may expose more performance levels than there are + * P-states accessible through the PERF_CTL interface. If that happens, the + * scaling factor between HWP performance levels and CPU frequency will be less + * than the scaling factor between P-state values and CPU frequency. + * + * In that case, the scaling factor between HWP performance levels and CPU + * frequency needs to be determined which can be done with the help of the + * observation that certain HWP performance levels should correspond to certain + * P-states, like for example the HWP highest performance should correspond + * to the maximum turbo P-state of the CPU. + */ +static void intel_pstate_hybrid_hwp_calibrate(struct cpudata *cpu) +{ + int perf_ctl_max_phys = cpu->pstate.max_pstate_physical; + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; + int perf_ctl_turbo = pstate_funcs.get_turbo(); + int turbo_freq = perf_ctl_turbo * perf_ctl_scaling; + int perf_ctl_max = pstate_funcs.get_max(); + int max_freq = perf_ctl_max * perf_ctl_scaling; + int scaling = INT_MAX; + int freq; + + pr_debug("CPU%d: perf_ctl_max_phys = %d\n", cpu->cpu, perf_ctl_max_phys); + pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, perf_ctl_max); + pr_debug("CPU%d: perf_ctl_turbo = %d\n", cpu->cpu, perf_ctl_turbo); + pr_debug("CPU%d: perf_ctl_scaling = %d\n", cpu->cpu, perf_ctl_scaling); + + pr_debug("CPU%d: HWP_CAP guaranteed = %d\n", cpu->cpu, cpu->pstate.max_pstate); + pr_debug("CPU%d: HWP_CAP highest = %d\n", cpu->cpu, cpu->pstate.turbo_pstate); + +#ifdef CONFIG_ACPI + if (IS_ENABLED(CONFIG_ACPI_CPPC_LIB)) { + struct cppc_perf_caps caps; + + if (intel_pstate_cppc_perf_caps(cpu, &caps)) { + if (intel_pstate_cppc_perf_valid(caps.nominal_perf, &caps)) { + pr_debug("CPU%d: Using CPPC nominal\n", cpu->cpu); + + /* + * If the CPPC nominal performance is valid, it + * can be assumed to correspond to cpu_khz. + */ + if (caps.nominal_perf == perf_ctl_max_phys) { + intel_pstate_hybrid_hwp_perf_ctl_parity(cpu); + return; + } + scaling = DIV_ROUND_UP(cpu_khz, caps.nominal_perf); + } else if (intel_pstate_cppc_perf_valid(caps.guaranteed_perf, &caps)) { + pr_debug("CPU%d: Using CPPC guaranteed\n", cpu->cpu); + + /* + * If the CPPC guaranteed performance is valid, + * it can be assumed to correspond to max_freq. + */ + if (caps.guaranteed_perf == perf_ctl_max) { + intel_pstate_hybrid_hwp_perf_ctl_parity(cpu); + return; + } + scaling = DIV_ROUND_UP(max_freq, caps.guaranteed_perf); + } + } + } +#endif + /* + * If using the CPPC data to compute the HWP-to-frequency scaling factor + * doesn't work, use the HWP_CAP gauranteed perf for this purpose with + * the assumption that it corresponds to max_freq. + */ + if (scaling > perf_ctl_scaling) { + pr_debug("CPU%d: Using HWP_CAP guaranteed\n", cpu->cpu); + + if (cpu->pstate.max_pstate == perf_ctl_max) { + intel_pstate_hybrid_hwp_perf_ctl_parity(cpu); + return; + } + scaling = DIV_ROUND_UP(max_freq, cpu->pstate.max_pstate); + if (scaling > perf_ctl_scaling) { + /* + * This should not happen, because it would mean that + * the number of HWP perf levels was less than the + * number of P-states, so use the PERF_CTL scaling in + * that case. + */ + pr_debug("CPU%d: scaling (%d) out of range\n", cpu->cpu, + scaling); + + intel_pstate_hybrid_hwp_perf_ctl_parity(cpu); + return; + } + } + + /* + * If the product of the HWP performance scaling factor obtained above + * and the HWP_CAP highest performance is greater than the maximum turbo + * frequency corresponding to the pstate_funcs.get_turbo() return value, + * the scaling factor is too high, so recompute it so that the HWP_CAP + * highest performance corresponds to the maximum turbo frequency. + */ + if (turbo_freq < cpu->pstate.turbo_pstate * scaling) { + pr_debug("CPU%d: scaling too high (%d)\n", cpu->cpu, scaling); + + cpu->pstate.turbo_freq = turbo_freq; + scaling = DIV_ROUND_UP(turbo_freq, cpu->pstate.turbo_pstate); + } + + cpu->pstate.scaling = scaling; + + pr_debug("CPU%d: HWP-to-frequency scaling factor: %d\n", cpu->cpu, scaling); + + cpu->pstate.max_freq = rounddown(cpu->pstate.max_pstate * scaling, + perf_ctl_scaling); + + freq = perf_ctl_max_phys * perf_ctl_scaling; + cpu->pstate.max_pstate_physical = DIV_ROUND_UP(freq, scaling); + + cpu->pstate.min_freq = cpu->pstate.min_pstate * perf_ctl_scaling; + /* + * Cast the min P-state value retrieved via pstate_funcs.get_min() to + * the effective range of HWP performance levels. + */ + cpu->pstate.min_pstate = DIV_ROUND_UP(cpu->pstate.min_freq, scaling); +} + static inline void update_turbo_state(void) { u64 misc_en; @@ -795,19 +946,22 @@ cpufreq_freq_attr_rw(energy_performance_preference); static ssize_t show_base_frequency(struct cpufreq_policy *policy, char *buf) { - struct cpudata *cpu; - u64 cap; - int ratio; + struct cpudata *cpu = all_cpu_data[policy->cpu]; + int ratio, freq; - ratio = intel_pstate_get_cppc_guranteed(policy->cpu); + ratio = intel_pstate_get_cppc_guaranteed(policy->cpu); if (ratio <= 0) { + u64 cap; + rdmsrl_on_cpu(policy->cpu, MSR_HWP_CAPABILITIES, &cap); ratio = HWP_GUARANTEED_PERF(cap); } - cpu = all_cpu_data[policy->cpu]; + freq = ratio * cpu->pstate.scaling; + if (cpu->pstate.scaling != cpu->pstate.perf_ctl_scaling) + freq = rounddown(freq, cpu->pstate.perf_ctl_scaling); - return sprintf(buf, "%d\n", ratio * cpu->pstate.scaling); + return sprintf(buf, "%d\n", freq); } cpufreq_freq_attr_ro(base_frequency); @@ -831,9 +985,20 @@ static void __intel_pstate_get_hwp_cap(struct cpudata *cpu) static void intel_pstate_get_hwp_cap(struct cpudata *cpu) { + int scaling = cpu->pstate.scaling; + __intel_pstate_get_hwp_cap(cpu); - cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; - cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + + cpu->pstate.max_freq = cpu->pstate.max_pstate * scaling; + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * scaling; + if (scaling != cpu->pstate.perf_ctl_scaling) { + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; + + cpu->pstate.max_freq = rounddown(cpu->pstate.max_freq, + perf_ctl_scaling); + cpu->pstate.turbo_freq = rounddown(cpu->pstate.turbo_freq, + perf_ctl_scaling); + } } static void intel_pstate_hwp_set(unsigned int cpu) @@ -1365,8 +1530,6 @@ define_one_global_rw(energy_efficiency); static struct attribute *intel_pstate_attributes[] = { &status.attr, &no_turbo.attr, - &turbo_pct.attr, - &num_pstates.attr, NULL }; @@ -1391,6 +1554,14 @@ static void __init intel_pstate_sysfs_expose_params(void) if (WARN_ON(rc)) return; + if (!boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + rc = sysfs_create_file(intel_pstate_kobject, &turbo_pct.attr); + WARN_ON(rc); + + rc = sysfs_create_file(intel_pstate_kobject, &num_pstates.attr); + WARN_ON(rc); + } + /* * If per cpu limits are enforced there are no global limits, so * return without creating max/min_perf_pct attributes @@ -1417,6 +1588,11 @@ static void __init intel_pstate_sysfs_remove(void) sysfs_remove_group(intel_pstate_kobject, &intel_pstate_attr_group); + if (!boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + sysfs_remove_file(intel_pstate_kobject, &num_pstates.attr); + sysfs_remove_file(intel_pstate_kobject, &turbo_pct.attr); + } + if (!per_cpu_limits) { sysfs_remove_file(intel_pstate_kobject, &max_perf_pct.attr); sysfs_remove_file(intel_pstate_kobject, &min_perf_pct.attr); @@ -1713,19 +1889,33 @@ static void intel_pstate_max_within_limits(struct cpudata *cpu) static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) { + bool hybrid_cpu = boot_cpu_has(X86_FEATURE_HYBRID_CPU); + int perf_ctl_max_phys = pstate_funcs.get_max_physical(); + int perf_ctl_scaling = hybrid_cpu ? cpu_khz / perf_ctl_max_phys : + pstate_funcs.get_scaling(); + cpu->pstate.min_pstate = pstate_funcs.get_min(); - cpu->pstate.max_pstate_physical = pstate_funcs.get_max_physical(); - cpu->pstate.scaling = pstate_funcs.get_scaling(); + cpu->pstate.max_pstate_physical = perf_ctl_max_phys; + cpu->pstate.perf_ctl_scaling = perf_ctl_scaling; if (hwp_active && !hwp_mode_bdw) { __intel_pstate_get_hwp_cap(cpu); + + if (hybrid_cpu) + intel_pstate_hybrid_hwp_calibrate(cpu); + else + cpu->pstate.scaling = perf_ctl_scaling; } else { + cpu->pstate.scaling = perf_ctl_scaling; cpu->pstate.max_pstate = pstate_funcs.get_max(); cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); } - cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; - cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; + if (cpu->pstate.scaling == perf_ctl_scaling) { + cpu->pstate.min_freq = cpu->pstate.min_pstate * perf_ctl_scaling; + cpu->pstate.max_freq = cpu->pstate.max_pstate * perf_ctl_scaling; + cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * perf_ctl_scaling; + } if (pstate_funcs.get_aperf_mperf_shift) cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); @@ -2087,6 +2277,8 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = { X86_MATCH(ATOM_GOLDMONT, core_funcs), X86_MATCH(ATOM_GOLDMONT_PLUS, core_funcs), X86_MATCH(SKYLAKE_X, core_funcs), + X86_MATCH(COMETLAKE, core_funcs), + X86_MATCH(ICELAKE_X, core_funcs), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); @@ -2195,23 +2387,34 @@ static void intel_pstate_update_perf_limits(struct cpudata *cpu, unsigned int policy_min, unsigned int policy_max) { - int scaling = cpu->pstate.scaling; + int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling; int32_t max_policy_perf, min_policy_perf; + max_policy_perf = policy_max / perf_ctl_scaling; + if (policy_max == policy_min) { + min_policy_perf = max_policy_perf; + } else { + min_policy_perf = policy_min / perf_ctl_scaling; + min_policy_perf = clamp_t(int32_t, min_policy_perf, + 0, max_policy_perf); + } + /* * HWP needs some special consideration, because HWP_REQUEST uses * abstract values to represent performance rather than pure ratios. */ - if (hwp_active) + if (hwp_active) { intel_pstate_get_hwp_cap(cpu); - max_policy_perf = policy_max / scaling; - if (policy_max == policy_min) { - min_policy_perf = max_policy_perf; - } else { - min_policy_perf = policy_min / scaling; - min_policy_perf = clamp_t(int32_t, min_policy_perf, - 0, max_policy_perf); + if (cpu->pstate.scaling != perf_ctl_scaling) { + int scaling = cpu->pstate.scaling; + int freq; + + freq = max_policy_perf * perf_ctl_scaling; + max_policy_perf = DIV_ROUND_UP(freq, scaling); + freq = min_policy_perf * perf_ctl_scaling; + min_policy_perf = DIV_ROUND_UP(freq, scaling); + } } pr_debug("cpu:%d min_policy_perf:%d max_policy_perf:%d\n", @@ -2405,7 +2608,7 @@ static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) cpu->min_perf_ratio = 0; /* cpuinfo and default policy values */ - policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; + policy->cpuinfo.min_freq = cpu->pstate.min_freq; update_turbo_state(); global.turbo_disabled_mf = global.turbo_disabled; policy->cpuinfo.max_freq = global.turbo_disabled ? @@ -3135,6 +3338,8 @@ hwp_cpu_matched: } pr_info("HWP enabled\n"); + } else if (boot_cpu_has(X86_FEATURE_HYBRID_CPU)) { + pr_warn("Problematic setup: Hybrid processor with disabled HWP\n"); } return 0; diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index d05e761d9572..afc59b292153 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -16,7 +16,6 @@ #include <linux/cpufreq.h> #include <linux/module.h> #include <linux/err.h> -#include <linux/sched.h> /* set_cpus_allowed() */ #include <linux/delay.h> #include <linux/platform_device.h> diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c index 73a208559fe2..330c8d6cf93c 100644 --- a/drivers/cpufreq/sc520_freq.c +++ b/drivers/cpufreq/sc520_freq.c @@ -42,6 +42,7 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu) default: pr_err("error: cpuctl register has unexpected value %02x\n", clockspeed_reg); + fallthrough; case 0x01: return 100000; case 0x02: diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c index 0ac265d47ef0..1a251e635ebd 100644 --- a/drivers/cpufreq/sh-cpufreq.c +++ b/drivers/cpufreq/sh-cpufreq.c @@ -23,7 +23,6 @@ #include <linux/cpumask.h> #include <linux/cpu.h> #include <linux/smp.h> -#include <linux/sched.h> /* set_cpus_allowed() */ #include <linux/clk.h> #include <linux/percpu.h> #include <linux/sh_clk.h> diff --git a/drivers/cpuidle/governors/teo.c b/drivers/cpuidle/governors/teo.c index ac4bb27d69b0..7b91060e82f6 100644 --- a/drivers/cpuidle/governors/teo.c +++ b/drivers/cpuidle/governors/teo.c @@ -2,47 +2,103 @@ /* * Timer events oriented CPU idle governor * - * Copyright (C) 2018 Intel Corporation + * Copyright (C) 2018 - 2021 Intel Corporation * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> + */ + +/** + * DOC: teo-description * * The idea of this governor is based on the observation that on many systems * timer events are two or more orders of magnitude more frequent than any - * other interrupts, so they are likely to be the most significant source of CPU + * other interrupts, so they are likely to be the most significant cause of CPU * wakeups from idle states. Moreover, information about what happened in the * (relatively recent) past can be used to estimate whether or not the deepest - * idle state with target residency within the time to the closest timer is - * likely to be suitable for the upcoming idle time of the CPU and, if not, then - * which of the shallower idle states to choose. + * idle state with target residency within the (known) time till the closest + * timer event, referred to as the sleep length, is likely to be suitable for + * the upcoming CPU idle period and, if not, then which of the shallower idle + * states to choose instead of it. + * + * Of course, non-timer wakeup sources are more important in some use cases + * which can be covered by taking a few most recent idle time intervals of the + * CPU into account. However, even in that context it is not necessary to + * consider idle duration values greater than the sleep length, because the + * closest timer will ultimately wake up the CPU anyway unless it is woken up + * earlier. + * + * Thus this governor estimates whether or not the prospective idle duration of + * a CPU is likely to be significantly shorter than the sleep length and selects + * an idle state for it accordingly. + * + * The computations carried out by this governor are based on using bins whose + * boundaries are aligned with the target residency parameter values of the CPU + * idle states provided by the %CPUIdle driver in the ascending order. That is, + * the first bin spans from 0 up to, but not including, the target residency of + * the second idle state (idle state 1), the second bin spans from the target + * residency of idle state 1 up to, but not including, the target residency of + * idle state 2, the third bin spans from the target residency of idle state 2 + * up to, but not including, the target residency of idle state 3 and so on. + * The last bin spans from the target residency of the deepest idle state + * supplied by the driver to infinity. + * + * Two metrics called "hits" and "intercepts" are associated with each bin. + * They are updated every time before selecting an idle state for the given CPU + * in accordance with what happened last time. + * + * The "hits" metric reflects the relative frequency of situations in which the + * sleep length and the idle duration measured after CPU wakeup fall into the + * same bin (that is, the CPU appears to wake up "on time" relative to the sleep + * length). In turn, the "intercepts" metric reflects the relative frequency of + * situations in which the measured idle duration is so much shorter than the + * sleep length that the bin it falls into corresponds to an idle state + * shallower than the one whose bin is fallen into by the sleep length (these + * situations are referred to as "intercepts" below). + * + * In addition to the metrics described above, the governor counts recent + * intercepts (that is, intercepts that have occurred during the last + * %NR_RECENT invocations of it for the given CPU) for each bin. * - * Of course, non-timer wakeup sources are more important in some use cases and - * they can be covered by taking a few most recent idle time intervals of the - * CPU into account. However, even in that case it is not necessary to consider - * idle duration values greater than the time till the closest timer, as the - * patterns that they may belong to produce average values close enough to - * the time till the closest timer (sleep length) anyway. + * In order to select an idle state for a CPU, the governor takes the following + * steps (modulo the possible latency constraint that must be taken into account + * too): * - * Thus this governor estimates whether or not the upcoming idle time of the CPU - * is likely to be significantly shorter than the sleep length and selects an - * idle state for it in accordance with that, as follows: + * 1. Find the deepest CPU idle state whose target residency does not exceed + * the current sleep length (the candidate idle state) and compute 3 sums as + * follows: * - * - Find an idle state on the basis of the sleep length and state statistics - * collected over time: + * - The sum of the "hits" and "intercepts" metrics for the candidate state + * and all of the deeper idle states (it represents the cases in which the + * CPU was idle long enough to avoid being intercepted if the sleep length + * had been equal to the current one). * - * o Find the deepest idle state whose target residency is less than or equal - * to the sleep length. + * - The sum of the "intercepts" metrics for all of the idle states shallower + * than the candidate one (it represents the cases in which the CPU was not + * idle long enough to avoid being intercepted if the sleep length had been + * equal to the current one). * - * o Select it if it matched both the sleep length and the observed idle - * duration in the past more often than it matched the sleep length alone - * (i.e. the observed idle duration was significantly shorter than the sleep - * length matched by it). + * - The sum of the numbers of recent intercepts for all of the idle states + * shallower than the candidate one. * - * o Otherwise, select the shallower state with the greatest matched "early" - * wakeups metric. + * 2. If the second sum is greater than the first one or the third sum is + * greater than %NR_RECENT / 2, the CPU is likely to wake up early, so look + * for an alternative idle state to select. * - * - If the majority of the most recent idle duration values are below the - * target residency of the idle state selected so far, use those values to - * compute the new expected idle duration and find an idle state matching it - * (which has to be shallower than the one selected so far). + * - Traverse the idle states shallower than the candidate one in the + * descending order. + * + * - For each of them compute the sum of the "intercepts" metrics and the sum + * of the numbers of recent intercepts over all of the idle states between + * it and the candidate one (including the former and excluding the + * latter). + * + * - If each of these sums that needs to be taken into account (because the + * check related to it has indicated that the CPU is likely to wake up + * early) is greater than a half of the corresponding sum computed in step + * 1 (which means that the target residency of the state in question had + * not exceeded the idle duration in over a half of the relevant cases), + * select the given idle state instead of the candidate one. + * + * 3. By default, select the candidate state. */ #include <linux/cpuidle.h> @@ -60,65 +116,51 @@ /* * Number of the most recent idle duration values to take into consideration for - * the detection of wakeup patterns. + * the detection of recent early wakeup patterns. */ -#define INTERVALS 8 +#define NR_RECENT 9 /** - * struct teo_idle_state - Idle state data used by the TEO cpuidle governor. - * @early_hits: "Early" CPU wakeups "matching" this state. - * @hits: "On time" CPU wakeups "matching" this state. - * @misses: CPU wakeups "missing" this state. - * - * A CPU wakeup is "matched" by a given idle state if the idle duration measured - * after the wakeup is between the target residency of that state and the target - * residency of the next one (or if this is the deepest available idle state, it - * "matches" a CPU wakeup when the measured idle duration is at least equal to - * its target residency). - * - * Also, from the TEO governor perspective, a CPU wakeup from idle is "early" if - * it occurs significantly earlier than the closest expected timer event (that - * is, early enough to match an idle state shallower than the one matching the - * time till the closest timer event). Otherwise, the wakeup is "on time", or - * it is a "hit". - * - * A "miss" occurs when the given state doesn't match the wakeup, but it matches - * the time till the closest timer event used for idle state selection. + * struct teo_bin - Metrics used by the TEO cpuidle governor. + * @intercepts: The "intercepts" metric. + * @hits: The "hits" metric. + * @recent: The number of recent "intercepts". */ -struct teo_idle_state { - unsigned int early_hits; +struct teo_bin { + unsigned int intercepts; unsigned int hits; - unsigned int misses; + unsigned int recent; }; /** * struct teo_cpu - CPU data used by the TEO cpuidle governor. * @time_span_ns: Time between idle state selection and post-wakeup update. * @sleep_length_ns: Time till the closest timer event (at the selection time). - * @states: Idle states data corresponding to this CPU. - * @interval_idx: Index of the most recent saved idle interval. - * @intervals: Saved idle duration values. + * @state_bins: Idle state data bins for this CPU. + * @total: Grand total of the "intercepts" and "hits" mertics for all bins. + * @next_recent_idx: Index of the next @recent_idx entry to update. + * @recent_idx: Indices of bins corresponding to recent "intercepts". */ struct teo_cpu { s64 time_span_ns; s64 sleep_length_ns; - struct teo_idle_state states[CPUIDLE_STATE_MAX]; - int interval_idx; - u64 intervals[INTERVALS]; + struct teo_bin state_bins[CPUIDLE_STATE_MAX]; + unsigned int total; + int next_recent_idx; + int recent_idx[NR_RECENT]; }; static DEFINE_PER_CPU(struct teo_cpu, teo_cpus); /** - * teo_update - Update CPU data after wakeup. + * teo_update - Update CPU metrics after wakeup. * @drv: cpuidle driver containing state data. * @dev: Target CPU. */ static void teo_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) { struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); - int i, idx_hit = 0, idx_timer = 0; - unsigned int hits, misses; + int i, idx_timer = 0, idx_duration = 0; u64 measured_ns; if (cpu_data->time_span_ns >= cpu_data->sleep_length_ns) { @@ -151,53 +193,52 @@ static void teo_update(struct cpuidle_driver *drv, struct cpuidle_device *dev) measured_ns /= 2; } + cpu_data->total = 0; + /* - * Decay the "early hits" metric for all of the states and find the - * states matching the sleep length and the measured idle duration. + * Decay the "hits" and "intercepts" metrics for all of the bins and + * find the bins that the sleep length and the measured idle duration + * fall into. */ for (i = 0; i < drv->state_count; i++) { - unsigned int early_hits = cpu_data->states[i].early_hits; + s64 target_residency_ns = drv->states[i].target_residency_ns; + struct teo_bin *bin = &cpu_data->state_bins[i]; - cpu_data->states[i].early_hits -= early_hits >> DECAY_SHIFT; + bin->hits -= bin->hits >> DECAY_SHIFT; + bin->intercepts -= bin->intercepts >> DECAY_SHIFT; - if (drv->states[i].target_residency_ns <= cpu_data->sleep_length_ns) { + cpu_data->total += bin->hits + bin->intercepts; + + if (target_residency_ns <= cpu_data->sleep_length_ns) { idx_timer = i; - if (drv->states[i].target_residency_ns <= measured_ns) - idx_hit = i; + if (target_residency_ns <= measured_ns) + idx_duration = i; } } - /* - * Update the "hits" and "misses" data for the state matching the sleep - * length. If it matches the measured idle duration too, this is a hit, - * so increase the "hits" metric for it then. Otherwise, this is a - * miss, so increase the "misses" metric for it. In the latter case - * also increase the "early hits" metric for the state that actually - * matches the measured idle duration. - */ - hits = cpu_data->states[idx_timer].hits; - hits -= hits >> DECAY_SHIFT; + i = cpu_data->next_recent_idx++; + if (cpu_data->next_recent_idx >= NR_RECENT) + cpu_data->next_recent_idx = 0; - misses = cpu_data->states[idx_timer].misses; - misses -= misses >> DECAY_SHIFT; + if (cpu_data->recent_idx[i] >= 0) + cpu_data->state_bins[cpu_data->recent_idx[i]].recent--; - if (idx_timer == idx_hit) { - hits += PULSE; + /* + * If the measured idle duration falls into the same bin as the sleep + * length, this is a "hit", so update the "hits" metric for that bin. + * Otherwise, update the "intercepts" metric for the bin fallen into by + * the measured idle duration. + */ + if (idx_timer == idx_duration) { + cpu_data->state_bins[idx_timer].hits += PULSE; + cpu_data->recent_idx[i] = -1; } else { - misses += PULSE; - cpu_data->states[idx_hit].early_hits += PULSE; + cpu_data->state_bins[idx_duration].intercepts += PULSE; + cpu_data->state_bins[idx_duration].recent++; + cpu_data->recent_idx[i] = idx_duration; } - cpu_data->states[idx_timer].misses = misses; - cpu_data->states[idx_timer].hits = hits; - - /* - * Save idle duration values corresponding to non-timer wakeups for - * pattern detection. - */ - cpu_data->intervals[cpu_data->interval_idx++] = measured_ns; - if (cpu_data->interval_idx >= INTERVALS) - cpu_data->interval_idx = 0; + cpu_data->total += PULSE; } static bool teo_time_ok(u64 interval_ns) @@ -205,6 +246,12 @@ static bool teo_time_ok(u64 interval_ns) return !tick_nohz_tick_stopped() || interval_ns >= TICK_NSEC; } +static s64 teo_middle_of_bin(int idx, struct cpuidle_driver *drv) +{ + return (drv->states[idx].target_residency_ns + + drv->states[idx+1].target_residency_ns) / 2; +} + /** * teo_find_shallower_state - Find shallower idle state matching given duration. * @drv: cpuidle driver containing state data. @@ -240,10 +287,18 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev, { struct teo_cpu *cpu_data = per_cpu_ptr(&teo_cpus, dev->cpu); s64 latency_req = cpuidle_governor_latency_req(dev->cpu); - int max_early_idx, prev_max_early_idx, constraint_idx, idx0, idx, i; - unsigned int hits, misses, early_hits; + unsigned int idx_intercept_sum = 0; + unsigned int intercept_sum = 0; + unsigned int idx_recent_sum = 0; + unsigned int recent_sum = 0; + unsigned int idx_hit_sum = 0; + unsigned int hit_sum = 0; + int constraint_idx = 0; + int idx0 = 0, idx = -1; + bool alt_intercepts, alt_recent; ktime_t delta_tick; s64 duration_ns; + int i; if (dev->last_state_idx >= 0) { teo_update(drv, dev); @@ -255,171 +310,136 @@ static int teo_select(struct cpuidle_driver *drv, struct cpuidle_device *dev, duration_ns = tick_nohz_get_sleep_length(&delta_tick); cpu_data->sleep_length_ns = duration_ns; - hits = 0; - misses = 0; - early_hits = 0; - max_early_idx = -1; - prev_max_early_idx = -1; - constraint_idx = drv->state_count; - idx = -1; - idx0 = idx; + /* Check if there is any choice in the first place. */ + if (drv->state_count < 2) { + idx = 0; + goto end; + } + if (!dev->states_usage[0].disable) { + idx = 0; + if (drv->states[1].target_residency_ns > duration_ns) + goto end; + } - for (i = 0; i < drv->state_count; i++) { + /* + * Find the deepest idle state whose target residency does not exceed + * the current sleep length and the deepest idle state not deeper than + * the former whose exit latency does not exceed the current latency + * constraint. Compute the sums of metrics for early wakeup pattern + * detection. + */ + for (i = 1; i < drv->state_count; i++) { + struct teo_bin *prev_bin = &cpu_data->state_bins[i-1]; struct cpuidle_state *s = &drv->states[i]; - if (dev->states_usage[i].disable) { - /* - * Ignore disabled states with target residencies beyond - * the anticipated idle duration. - */ - if (s->target_residency_ns > duration_ns) - continue; - - /* - * This state is disabled, so the range of idle duration - * values corresponding to it is covered by the current - * candidate state, but still the "hits" and "misses" - * metrics of the disabled state need to be used to - * decide whether or not the state covering the range in - * question is good enough. - */ - hits = cpu_data->states[i].hits; - misses = cpu_data->states[i].misses; - - if (early_hits >= cpu_data->states[i].early_hits || - idx < 0) - continue; - - /* - * If the current candidate state has been the one with - * the maximum "early hits" metric so far, the "early - * hits" metric of the disabled state replaces the - * current "early hits" count to avoid selecting a - * deeper state with lower "early hits" metric. - */ - if (max_early_idx == idx) { - early_hits = cpu_data->states[i].early_hits; - continue; - } - - /* - * The current candidate state is closer to the disabled - * one than the current maximum "early hits" state, so - * replace the latter with it, but in case the maximum - * "early hits" state index has not been set so far, - * check if the current candidate state is not too - * shallow for that role. - */ - if (teo_time_ok(drv->states[idx].target_residency_ns)) { - prev_max_early_idx = max_early_idx; - early_hits = cpu_data->states[i].early_hits; - max_early_idx = idx; - } + /* + * Update the sums of idle state mertics for all of the states + * shallower than the current one. + */ + intercept_sum += prev_bin->intercepts; + hit_sum += prev_bin->hits; + recent_sum += prev_bin->recent; + if (dev->states_usage[i].disable) continue; - } if (idx < 0) { idx = i; /* first enabled state */ - hits = cpu_data->states[i].hits; - misses = cpu_data->states[i].misses; idx0 = i; } if (s->target_residency_ns > duration_ns) break; - if (s->exit_latency_ns > latency_req && constraint_idx > i) + idx = i; + + if (s->exit_latency_ns <= latency_req) constraint_idx = i; - idx = i; - hits = cpu_data->states[i].hits; - misses = cpu_data->states[i].misses; - - if (early_hits < cpu_data->states[i].early_hits && - teo_time_ok(drv->states[i].target_residency_ns)) { - prev_max_early_idx = max_early_idx; - early_hits = cpu_data->states[i].early_hits; - max_early_idx = i; - } + idx_intercept_sum = intercept_sum; + idx_hit_sum = hit_sum; + idx_recent_sum = recent_sum; } - /* - * If the "hits" metric of the idle state matching the sleep length is - * greater than its "misses" metric, that is the one to use. Otherwise, - * it is more likely that one of the shallower states will match the - * idle duration observed after wakeup, so take the one with the maximum - * "early hits" metric, but if that cannot be determined, just use the - * state selected so far. - */ - if (hits <= misses) { - /* - * The current candidate state is not suitable, so take the one - * whose "early hits" metric is the maximum for the range of - * shallower states. - */ - if (idx == max_early_idx) - max_early_idx = prev_max_early_idx; - - if (max_early_idx >= 0) { - idx = max_early_idx; - duration_ns = drv->states[idx].target_residency_ns; - } + /* Avoid unnecessary overhead. */ + if (idx < 0) { + idx = 0; /* No states enabled, must use 0. */ + goto end; + } else if (idx == idx0) { + goto end; } /* - * If there is a latency constraint, it may be necessary to use a - * shallower idle state than the one selected so far. + * If the sum of the intercepts metric for all of the idle states + * shallower than the current candidate one (idx) is greater than the + * sum of the intercepts and hits metrics for the candidate state and + * all of the deeper states, or the sum of the numbers of recent + * intercepts over all of the states shallower than the candidate one + * is greater than a half of the number of recent events taken into + * account, the CPU is likely to wake up early, so find an alternative + * idle state to select. */ - if (constraint_idx < idx) - idx = constraint_idx; - - if (idx < 0) { - idx = 0; /* No states enabled. Must use 0. */ - } else if (idx > idx0) { - unsigned int count = 0; - u64 sum = 0; + alt_intercepts = 2 * idx_intercept_sum > cpu_data->total - idx_hit_sum; + alt_recent = idx_recent_sum > NR_RECENT / 2; + if (alt_recent || alt_intercepts) { + s64 last_enabled_span_ns = duration_ns; + int last_enabled_idx = idx; /* - * The target residencies of at least two different enabled idle - * states are less than or equal to the current expected idle - * duration. Try to refine the selection using the most recent - * measured idle duration values. + * Look for the deepest idle state whose target residency had + * not exceeded the idle duration in over a half of the relevant + * cases (both with respect to intercepts overall and with + * respect to the recent intercepts only) in the past. * - * Count and sum the most recent idle duration values less than - * the current expected idle duration value. + * Take the possible latency constraint and duration limitation + * present if the tick has been stopped already into account. */ - for (i = 0; i < INTERVALS; i++) { - u64 val = cpu_data->intervals[i]; + intercept_sum = 0; + recent_sum = 0; + + for (i = idx - 1; i >= idx0; i--) { + struct teo_bin *bin = &cpu_data->state_bins[i]; + s64 span_ns; - if (val >= duration_ns) + intercept_sum += bin->intercepts; + recent_sum += bin->recent; + + if (dev->states_usage[i].disable) continue; - count++; - sum += val; - } + span_ns = teo_middle_of_bin(i, drv); + if (!teo_time_ok(span_ns)) { + /* + * The current state is too shallow, so select + * the first enabled deeper state. + */ + duration_ns = last_enabled_span_ns; + idx = last_enabled_idx; + break; + } - /* - * Give up unless the majority of the most recent idle duration - * values are in the interesting range. - */ - if (count > INTERVALS / 2) { - u64 avg_ns = div64_u64(sum, count); - - /* - * Avoid spending too much time in an idle state that - * would be too shallow. - */ - if (teo_time_ok(avg_ns)) { - duration_ns = avg_ns; - if (drv->states[idx].target_residency_ns > avg_ns) - idx = teo_find_shallower_state(drv, dev, - idx, avg_ns); + if ((!alt_recent || 2 * recent_sum > idx_recent_sum) && + (!alt_intercepts || + 2 * intercept_sum > idx_intercept_sum)) { + idx = i; + duration_ns = span_ns; + break; } + + last_enabled_span_ns = span_ns; + last_enabled_idx = i; } } /* + * If there is a latency constraint, it may be necessary to select an + * idle state shallower than the current candidate one. + */ + if (idx > constraint_idx) + idx = constraint_idx; + +end: + /* * Don't stop the tick if the selected state is a polling one or if the * expected idle duration is shorter than the tick period length. */ @@ -478,8 +498,8 @@ static int teo_enable_device(struct cpuidle_driver *drv, memset(cpu_data, 0, sizeof(*cpu_data)); - for (i = 0; i < INTERVALS; i++) - cpu_data->intervals[i] = U64_MAX; + for (i = 0; i < NR_RECENT; i++) + cpu_data->recent_idx[i] = -1; return 0; } diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig index 20373a893b44..e87d01c0b76a 100644 --- a/drivers/devfreq/Kconfig +++ b/drivers/devfreq/Kconfig @@ -103,7 +103,6 @@ config ARM_IMX8M_DDRC_DEVFREQ tristate "i.MX8M DDRC DEVFREQ Driver" depends on (ARCH_MXC && HAVE_ARM_SMCCC) || \ (COMPILE_TEST && HAVE_ARM_SMCCC) - select DEVFREQ_GOV_SIMPLE_ONDEMAND select DEVFREQ_GOV_USERSPACE help This adds the DEVFREQ driver for the i.MX8M DDR Controller. It allows diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c index fe08c46642f7..28f3e0ba6cdd 100644 --- a/drivers/devfreq/devfreq.c +++ b/drivers/devfreq/devfreq.c @@ -823,6 +823,7 @@ struct devfreq *devfreq_add_device(struct device *dev, if (devfreq->profile->timer < 0 || devfreq->profile->timer >= DEVFREQ_TIMER_NUM) { mutex_unlock(&devfreq->lock); + err = -EINVAL; goto err_dev; } diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c index b094132bd20b..fc09324a03e0 100644 --- a/drivers/devfreq/governor_passive.c +++ b/drivers/devfreq/governor_passive.c @@ -65,7 +65,7 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, dev_pm_opp_put(p_opp); if (IS_ERR(opp)) - return PTR_ERR(opp); + goto no_required_opp; *freq = dev_pm_opp_get_freq(opp); dev_pm_opp_put(opp); @@ -73,6 +73,7 @@ static int devfreq_passive_get_target_freq(struct devfreq *devfreq, return 0; } +no_required_opp: /* * Get the OPP table's index of decided frequency by governor * of parent device. diff --git a/drivers/devfreq/governor_userspace.c b/drivers/devfreq/governor_userspace.c index 0fd6c4851071..ab9db7adb3ad 100644 --- a/drivers/devfreq/governor_userspace.c +++ b/drivers/devfreq/governor_userspace.c @@ -31,8 +31,8 @@ static int devfreq_userspace_func(struct devfreq *df, unsigned long *freq) return 0; } -static ssize_t store_freq(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) +static ssize_t set_freq_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) { struct devfreq *devfreq = to_devfreq(dev); struct userspace_data *data; @@ -52,8 +52,8 @@ static ssize_t store_freq(struct device *dev, struct device_attribute *attr, return err; } -static ssize_t show_freq(struct device *dev, struct device_attribute *attr, - char *buf) +static ssize_t set_freq_show(struct device *dev, + struct device_attribute *attr, char *buf) { struct devfreq *devfreq = to_devfreq(dev); struct userspace_data *data; @@ -70,7 +70,7 @@ static ssize_t show_freq(struct device *dev, struct device_attribute *attr, return err; } -static DEVICE_ATTR(set_freq, 0644, show_freq, store_freq); +static DEVICE_ATTR_RW(set_freq); static struct attribute *dev_entries[] = { &dev_attr_set_freq.attr, NULL, diff --git a/drivers/devfreq/imx-bus.c b/drivers/devfreq/imx-bus.c index 3fc3fd77492d..f3f6e25053ed 100644 --- a/drivers/devfreq/imx-bus.c +++ b/drivers/devfreq/imx-bus.c @@ -45,18 +45,6 @@ static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq) return 0; } -static int imx_bus_get_dev_status(struct device *dev, - struct devfreq_dev_status *stat) -{ - struct imx_bus *priv = dev_get_drvdata(dev); - - stat->busy_time = 0; - stat->total_time = 0; - stat->current_frequency = clk_get_rate(priv->clk); - - return 0; -} - static void imx_bus_exit(struct device *dev) { struct imx_bus *priv = dev_get_drvdata(dev); @@ -129,9 +117,7 @@ static int imx_bus_probe(struct platform_device *pdev) return ret; } - priv->profile.polling_ms = 1000; priv->profile.target = imx_bus_target; - priv->profile.get_dev_status = imx_bus_get_dev_status; priv->profile.exit = imx_bus_exit; priv->profile.get_cur_freq = imx_bus_get_cur_freq; priv->profile.initial_freq = clk_get_rate(priv->clk); diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c index ce83f883ca65..10661eb2aed8 100644 --- a/drivers/devfreq/tegra30-devfreq.c +++ b/drivers/devfreq/tegra30-devfreq.c @@ -688,6 +688,7 @@ static struct devfreq_dev_profile tegra_devfreq_profile = { .polling_ms = ACTMON_SAMPLING_PERIOD, .target = tegra_devfreq_target, .get_dev_status = tegra_devfreq_get_dev_status, + .is_cooling_device = true, }; static int tegra_governor_get_target(struct devfreq *devfreq, diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index ec1b9d306ba6..e6c543b5ee1d 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -1484,6 +1484,36 @@ static void __init sklh_idle_state_table_update(void) skl_cstates[6].flags |= CPUIDLE_FLAG_UNUSABLE; /* C9-SKL */ } +/** + * skx_idle_state_table_update - Adjust the Sky Lake/Cascade Lake + * idle states table. + */ +static void __init skx_idle_state_table_update(void) +{ + unsigned long long msr; + + rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr); + + /* + * 000b: C0/C1 (no package C-state support) + * 001b: C2 + * 010b: C6 (non-retention) + * 011b: C6 (retention) + * 111b: No Package C state limits. + */ + if ((msr & 0x7) < 2) { + /* + * Uses the CC6 + PC0 latency and 3 times of + * latency for target_residency if the PC6 + * is disabled in BIOS. This is consistent + * with how intel_idle driver uses _CST + * to set the target_residency. + */ + skx_cstates[2].exit_latency = 92; + skx_cstates[2].target_residency = 276; + } +} + static bool __init intel_idle_verify_cstate(unsigned int mwait_hint) { unsigned int mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint) + 1; @@ -1515,6 +1545,9 @@ static void __init intel_idle_init_cstates_icpu(struct cpuidle_driver *drv) case INTEL_FAM6_SKYLAKE: sklh_idle_state_table_update(); break; + case INTEL_FAM6_SKYLAKE_X: + skx_idle_state_table_update(); + break; } for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) { diff --git a/drivers/opp/core.c b/drivers/opp/core.c index e366218d6736..b335c077f215 100644 --- a/drivers/opp/core.c +++ b/drivers/opp/core.c @@ -893,6 +893,16 @@ static int _set_required_opps(struct device *dev, if (!required_opp_tables) return 0; + /* + * We only support genpd's OPPs in the "required-opps" for now, as we + * don't know much about other use cases. Error out if the required OPP + * doesn't belong to a genpd. + */ + if (unlikely(!required_opp_tables[0]->is_genpd)) { + dev_err(dev, "required-opps don't belong to a genpd\n"); + return -ENOENT; + } + /* required-opps not fully initialized yet */ if (lazy_linking_pending(opp_table)) return -EBUSY; diff --git a/drivers/opp/of.c b/drivers/opp/of.c index c582a9ca397b..d298e38aaf7e 100644 --- a/drivers/opp/of.c +++ b/drivers/opp/of.c @@ -197,21 +197,8 @@ static void _opp_table_alloc_required_tables(struct opp_table *opp_table, required_opp_tables[i] = _find_table_of_opp_np(required_np); of_node_put(required_np); - if (IS_ERR(required_opp_tables[i])) { + if (IS_ERR(required_opp_tables[i])) lazy = true; - continue; - } - - /* - * We only support genpd's OPPs in the "required-opps" for now, - * as we don't know how much about other cases. Error out if the - * required OPP doesn't belong to a genpd. - */ - if (!required_opp_tables[i]->is_genpd) { - dev_err(dev, "required-opp doesn't belong to genpd: %pOF\n", - required_np); - goto free_required_tables; - } } /* Let's do the linking later on */ @@ -379,13 +366,6 @@ static void lazy_link_required_opp_table(struct opp_table *new_table) struct dev_pm_opp *opp; int i, ret; - /* - * We only support genpd's OPPs in the "required-opps" for now, - * as we don't know much about other cases. - */ - if (!new_table->is_genpd) - return; - mutex_lock(&opp_table_lock); list_for_each_entry_safe(opp_table, temp, &lazy_opp_tables, lazy) { @@ -433,8 +413,7 @@ static void lazy_link_required_opp_table(struct opp_table *new_table) /* All required opp-tables found, remove from lazy list */ if (!lazy) { - list_del(&opp_table->lazy); - INIT_LIST_HEAD(&opp_table->lazy); + list_del_init(&opp_table->lazy); list_for_each_entry(opp, &opp_table->opp_list, node) _required_opps_available(opp, opp_table->required_opp_count); @@ -874,7 +853,7 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table, return ERR_PTR(-ENOMEM); ret = _read_opp_key(new_opp, opp_table, np, &rate_not_available); - if (ret < 0 && !opp_table->is_genpd) { + if (ret < 0) { dev_err(dev, "%s: opp key field not found\n", __func__); goto free_opp; } diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index dfcfbcecc34b..21a0577305ef 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -198,6 +198,7 @@ struct generic_pm_domain_data { struct notifier_block *power_nb; int cpu; unsigned int performance_state; + unsigned int rpm_pstate; ktime_t next_wakeup; void *data; }; diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index 6c08a085367b..aab8b35e9f8a 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -380,6 +380,9 @@ static inline int pm_runtime_get(struct device *dev) * The possible return values of this function are the same as for * pm_runtime_resume() and the runtime PM usage counter of @dev remains * incremented in all cases, even if it returns an error code. + * Consider using pm_runtime_resume_and_get() instead of it, especially + * if its return value is checked by the caller, as this is likely to result + * in cleaner code. */ static inline int pm_runtime_get_sync(struct device *dev) { diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig index 6bfe3ead10ad..a12779650f15 100644 --- a/kernel/power/Kconfig +++ b/kernel/power/Kconfig @@ -98,20 +98,20 @@ config PM_STD_PARTITION default "" help The default resume partition is the partition that the suspend- - to-disk implementation will look for a suspended disk image. + to-disk implementation will look for a suspended disk image. - The partition specified here will be different for almost every user. + The partition specified here will be different for almost every user. It should be a valid swap partition (at least for now) that is turned - on before suspending. + on before suspending. The partition specified can be overridden by specifying: - resume=/dev/<other device> + resume=/dev/<other device> - which will set the resume partition to the device specified. + which will set the resume partition to the device specified. Note there is currently not a way to specify which device to save the - suspended image to. It will simply pick the first available swap + suspended image to. It will simply pick the first available swap device. config PM_SLEEP diff --git a/kernel/power/process.c b/kernel/power/process.c index 50cc63534486..37401c99b7d7 100644 --- a/kernel/power/process.c +++ b/kernel/power/process.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * drivers/power/process.c - Functions for starting/stopping processes on + * drivers/power/process.c - Functions for starting/stopping processes on * suspend transitions. * * Originally from swsusp. diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c index 1a221dcb3c01..f7a986078213 100644 --- a/kernel/power/snapshot.c +++ b/kernel/power/snapshot.c @@ -331,7 +331,7 @@ static void *chain_alloc(struct chain_allocator *ca, unsigned int size) * * Memory bitmap is a structure consisting of many linked lists of * objects. The main list's elements are of type struct zone_bitmap - * and each of them corresonds to one zone. For each zone bitmap + * and each of them corresponds to one zone. For each zone bitmap * object there is a list of objects of type struct bm_block that * represent each blocks of bitmap in which information is stored. * @@ -1146,7 +1146,7 @@ int create_basic_memory_bitmaps(void) Free_second_object: kfree(bm2); Free_first_bitmap: - memory_bm_free(bm1, PG_UNSAFE_CLEAR); + memory_bm_free(bm1, PG_UNSAFE_CLEAR); Free_first_object: kfree(bm1); return -ENOMEM; @@ -1500,7 +1500,7 @@ static struct memory_bitmap copy_bm; /** * swsusp_free - Free pages allocated for hibernation image. * - * Image pages are alocated before snapshot creation, so they need to be + * Image pages are allocated before snapshot creation, so they need to be * released after resume. */ void swsusp_free(void) @@ -2326,7 +2326,7 @@ static struct memory_bitmap *safe_highmem_bm; * (@nr_highmem_p points to the variable containing the number of highmem image * pages). The pages that are "safe" (ie. will not be overwritten when the * hibernation image is restored entirely) have the corresponding bits set in - * @bm (it must be unitialized). + * @bm (it must be uninitialized). * * NOTE: This function should not be called if there are no highmem image pages. */ @@ -2483,7 +2483,7 @@ static inline void free_highmem_data(void) {} /** * prepare_image - Make room for loading hibernation image. - * @new_bm: Unitialized memory bitmap structure. + * @new_bm: Uninitialized memory bitmap structure. * @bm: Memory bitmap with unsafe pages marked. * * Use @bm to mark the pages that will be overwritten in the process of diff --git a/kernel/power/swap.c b/kernel/power/swap.c index bea3cb8afa11..3cb89baebc79 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -1125,7 +1125,7 @@ struct dec_data { }; /** - * Deompression function that runs in its own thread. + * Decompression function that runs in its own thread. */ static int lzo_decompress_threadfn(void *data) { |