diff options
| -rw-r--r-- | arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 71 |
1 files changed, 70 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 1a98a4a9a586..b476ad895119 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -52,6 +52,48 @@ reg = <0x80000000 0>; }; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 0>; + + trips { + cpu_alert0: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 1>; + + trips { + cpu_alert1: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <GIC_PPI 10 0x304>; @@ -115,6 +157,21 @@ cpu-offset = <0x80000>; }; + qfprom: efuse@700000 { + compatible = "qcom,msm8960-qfprom", "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_calib: calib@404 { + reg = <0x404 0x10>; + }; + + tsens_backup: backup-calib@414 { + reg = <0x414 0x10>; + }; + }; + msmgpio: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; gpio-controller; @@ -127,7 +184,7 @@ }; gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; + compatible = "qcom,gcc-msm8960", "syscon"; #clock-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; @@ -135,6 +192,18 @@ <&pxo_board>, <&lcc PLL4>; clock-names = "cxo", "pxo", "pll4"; + + tsens: thermal-sensor { + compatible = "qcom,msm8960-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller@28000000 { |