diff options
116 files changed, 2107 insertions, 1700 deletions
diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt deleted file mode 100644 index 114947e1de3d..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt +++ /dev/null @@ -1,31 +0,0 @@ -* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb3-phy" -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) -- reg: The base address and length of the registers -- interrupts: the interrupt specifier for the OTG detection -- clocks: phandles to the clocks for - - the USB3 PHY - - and peripheral mode/OTG detection -- clock-names: must contain "phy" and "peripheral" -- resets: phandle to the reset lines for: - - the USB3 PHY and - - peripheral mode/OTG detection -- reset-names: must contain "phy" and "peripheral" - -Optional properties: -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb3_phy0: phy@78080 { - compatible = "amlogic,meson-gxl-usb3-phy"; - #phy-cells = <0>; - reg = <0x0 0x78080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "phy", "peripheral"; - resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; - reset-names = "phy", "peripheral"; - }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt deleted file mode 100644 index 9a8b631904fd..000000000000 --- a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt +++ /dev/null @@ -1,42 +0,0 @@ -Amlogic Meson GX DWC3 USB SoC controller - -Required properties: -- compatible: depending on the SoC this should contain one of: - * amlogic,meson-axg-dwc3 - * amlogic,meson-gxl-dwc3 -- clocks: a handle for the "USB general" clock -- clock-names: must be "usb_general" -- resets: a handle for the shared "USB OTG" reset line -- reset-names: must be "usb_otg" - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -PHY documentation is provided in the following places: -- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt -- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt - -Example device nodes: - usb0: usb@ff500000 { - compatible = "amlogic,meson-axg-dwc3"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - clock-names = "usb_general"; - resets = <&reset RESET_USB_OTG>; - reset-names = "usb_otg"; - - dwc3: dwc3@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - phys = <&usb3_phy>, <&usb2_phy0>; - phy-names = "usb2-phy", "usb3-phy"; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml index b0e5e0fe9386..b0af50a7c124 100644 --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml @@ -25,9 +25,13 @@ description: | The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in host-only mode. + The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. + properties: compatible: enum: + - amlogic,meson-gxl-usb-ctrl + - amlogic,meson-gxm-usb-ctrl - amlogic,meson-g12a-usb-ctrl - amlogic,meson-a1-usb-ctrl @@ -41,6 +45,11 @@ properties: clocks: minItems: 1 + maxItems: 3 + + clock-names: + minItems: 1 + maxItems: 3 resets: minItems: 1 @@ -52,10 +61,8 @@ properties: maxItems: 1 phy-names: - items: - - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used - - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used - - const: usb3-phy0 # USB3 PHY if USB3_0 is used + minItems: 1 + maxItems: 3 phys: minItems: 1 @@ -93,10 +100,68 @@ allOf: properties: compatible: enum: + - amlogic,meson-g12a-usb-ctrl + + then: + properties: + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + - const: usb3-phy0 # USB3 PHY if USB3_0 is used + - if: + properties: + compatible: + enum: + - amlogic,meson-gxl-usb-ctrl + + then: + properties: + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + required: + - clock-names + - if: + properties: + compatible: + enum: + - amlogic,meson-gxm-usb-ctrl + + then: + properties: + clocks: + minItems: 2 + clock-names: + items: + - const: usb_ctrl + - const: ddr + phy-names: + items: + - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used + - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used + + required: + - clock-names + - if: + properties: + compatible: + enum: - amlogic,meson-a1-usb-ctrl then: properties: + phy-names: + items: + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used clocks: minItems: 3 clock-names: diff --git a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml index 06399ba0d9e4..5b2e8d867219 100644 --- a/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml +++ b/Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml @@ -52,6 +52,59 @@ properties: minimum: 1 maximum: 21 + vhub-vendor-id: + description: vhub Vendor ID + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-product-id: + description: vhub Product ID + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-device-revision: + description: vhub Device Revision in binary-coded decimal + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - maximum: 65535 + + vhub-strings: + type: object + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + '^string@[0-9a-f]+$': + type: object + description: string descriptors of the specific language + + properties: + reg: + maxItems: 1 + description: 16-bit Language Identifier defined by USB-IF + + manufacturer: + description: vhub manufacturer + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + product: + description: vhub product name + allOf: + - $ref: /schemas/types.yaml#/definitions/string + + serial-number: + description: vhub device serial number + allOf: + - $ref: /schemas/types.yaml#/definitions/string + required: - compatible - reg @@ -74,4 +127,19 @@ examples: aspeed,vhub-generic-endpoints = <15>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2ad_default>; + + vhub-vendor-id = <0x1d6b>; + vhub-product-id = <0x0107>; + vhub-device-revision = <0x0100>; + vhub-strings { + #address-cells = <1>; + #size-cells = <0>; + + string@0409 { + reg = <0x0409>; + manufacturer = "ASPEED"; + product = "USB Virtual Hub"; + serial-number = "0000"; + }; + }; }; diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index 44e80153b148..423b99a8fd97 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -88,13 +88,15 @@ Required properties: - clock-names: Should contain two strings "pclk" for the peripheral clock "hclk" for the host clock + +Deprecated property: - ep childnode: To specify the number of endpoints and their properties. Optional properties: - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether vbus is present (USB is connected). -Required child node properties: +Deprecated child node properties: - name: Name of the endpoint. - reg: Num of the endpoint. - atmel,fifo-size: Size of the fifo. @@ -112,56 +114,4 @@ usb2: gadget@fff78000 { clocks = <&utmi>, <&udphs_clk>; clock-names = "hclk", "pclk"; atmel,vbus-gpio = <&pioB 19 0>; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 9946ff9ba735..d03edf9d3935 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -15,8 +15,6 @@ Required properties: Exception for clocks: clocks are optional if the parent node (i.e. glue-layer) is compatible to one of the following: - "amlogic,meson-axg-dwc3" - "amlogic,meson-gxl-dwc3" "cavium,octeon-7130-usb-uctl" "qcom,dwc3" "samsung,exynos5250-dwusb3" diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt deleted file mode 100644 index 77df82e36138..000000000000 --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt +++ /dev/null @@ -1,56 +0,0 @@ -TI Keystone Soc USB Controller - -DWC3 GLUE - -Required properties: - - compatible: should be - "ti,keystone-dwc3" for Keystone 2 SoCs - "ti,am654-dwc3" for AM654 SoC - - #address-cells, #size-cells : should be '1' if the device has sub-nodes - with 'reg' property. - - reg : Address and length of the register set for the USB subsystem on - the SOC. - - interrupts : The irq number of this device that is used to interrupt the - MPU. - - ranges: allows valid 1:1 translation between child's address space and - parent's address space. - -SoC-specific Required Properties: -The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E -SoCs only: - -- clocks: Clock ID for USB functional clock. -- clock-names: Must be "usb". - - -The following are mandatory properties for 66AK2G and AM654: - -- power-domains: Should contain a phandle to a PM domain provider node - and an args specifier containing the USB device id - value. This property is as per the binding, - Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt - -Sub-nodes: -The dwc3 core should be added as subnode to Keystone DWC3 glue. -- dwc3 : - The binding details of dwc3 can be found in: - Documentation/devicetree/bindings/usb/dwc3.txt - -Example: - usb: usb@2680000 { - compatible = "ti,keystone-dwc3"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x2680000 0x10000>; - clocks = <&clkusb>; - clock-names = "usb"; - interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; - ranges; - - dwc3@2690000 { - compatible = "synopsys,dwc3"; - reg = <0x2690000 0x70000>; - interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; - usb-phy = <&usb_phy>, <&usb_phy>; - }; - }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml index b84ed8ee8cfc..75ea946d22e9 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml @@ -21,6 +21,7 @@ properties: - enum: - nvidia,tegra210-xudc # For Tegra210 - nvidia,tegra186-xudc # For Tegra186 + - nvidia,tegra194-xudc # For Tegra194 reg: minItems: 2 @@ -144,6 +145,7 @@ allOf: contains: enum: - nvidia,tegra186-xudc + - nvidia,tegra194-xudc then: properties: reg: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt deleted file mode 100644 index fbdd01756752..000000000000 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt +++ /dev/null @@ -1,104 +0,0 @@ -Qualcomm SuperSpeed DWC3 USB SoC controller - -Required properties: -- compatible: Compatible list, contains - "qcom,dwc3" - "qcom,msm8996-dwc3" for msm8996 SOC. - "qcom,msm8998-dwc3" for msm8998 SOC. - "qcom,sdm845-dwc3" for sdm845 SOC. -- reg: Offset and length of register set for QSCRATCH wrapper -- power-domains: specifies a phandle to PM domain provider node -- clocks: A list of phandle + clock-specifier pairs for the - clocks listed in clock-names -- clock-names: Should contain the following: - "core" Master/Core clock, have to be >= 125 MHz for SS - operation and >= 60MHz for HS operation - "mock_utmi" Mock utmi clock needed for ITP/SOF generation in - host mode. Its frequency should be 19.2MHz. - "sleep" Sleep clock, used for wakeup when USB3 core goes - into low power mode (U3). - -Optional clocks: - "iface" System bus AXI clock. - Not present on "qcom,msm8996-dwc3" compatible. - "cfg_noc" System Config NOC clock. - Not present on "qcom,msm8996-dwc3" compatible. -- assigned-clocks: Should be: - MOCK_UTMI_CLK - MASTER_CLK -- assigned-clock-rates: Should be: - 19.2Mhz (192000000) for MOCK_UTMI_CLK - >=125Mhz (125000000) for MASTER_CLK in SS mode - >=60Mhz (60000000) for MASTER_CLK in HS mode - -Optional properties: -- resets: Phandle to reset control that resets core and wrapper. -- interrupts: specifies interrupts from controller wrapper used - to wakeup from low power/susepnd state. Must contain - one or more entry for interrupt-names property -- interrupt-names: Must include the following entries: - - "hs_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB2 bus - - "ss_phy_irq": The interrupt that is asserted when a - wakeup event is received on USB3 bus - - "dm_hs_phy_irq" and "dp_hs_phy_irq": Separate - interrupts for any wakeup event on DM and DP lines -- qcom,select-utmi-as-pipe-clk: if present, disable USB3 pipe_clk requirement. - Used when dwc3 operates without SSPHY and only - HS/FS/LS modes are supported. - -Required child node: -A child node must exist to represent the core DWC3 IP block. The name of -the node is not important. The content of the node is defined in dwc3.txt. - -Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt - USB3 QMP PHY -Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY - -Example device nodes: - - hs_phy: phy@100f8800 { - compatible = "qcom,qusb2-v2-phy"; - ... - }; - - ss_phy: phy@100f8830 { - compatible = "qcom,qmp-v3-usb3-phy"; - ... - }; - - usb3_0: usb30@a6f8800 { - compatible = "qcom,dwc3"; - reg = <0xa6f8800 0x400>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - interrupts = <0 131 0>, <0 486 0>, <0 488 0>, <0 489 0>; - interrupt-names = "hs_phy_irq", "ss_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq"; - - clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>; - clock-names = "core", "mock_utmi", "sleep"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <133000000>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - reset-names = "core_reset"; - power-domains = <&gcc USB30_PRIM_GDSC>; - qcom,select-utmi-as-pipe-clk; - - dwc3@10000000 { - compatible = "snps,dwc3"; - reg = <0x10000000 0xcd00>; - interrupts = <0 205 0x4>; - phys = <&hs_phy>, <&ss_phy>; - phy-names = "usb2-phy", "usb3-phy"; - dr_mode = "host"; - }; - }; - diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml new file mode 100644 index 000000000000..ec1ec47b51cb --- /dev/null +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SuperSpeed DWC3 USB SoC controller + +maintainers: + - Manu Gautam <mgautam@codeaurora.org> + +properties: + compatible: + items: + - enum: + - qcom,msm8996-dwc3 + - qcom,msm8998-dwc3 + - qcom,sc7180-dwc3 + - qcom,sdm845-dwc3 + - const: qcom,dwc3 + + reg: + description: Offset and length of register set for QSCRATCH wrapper + maxItems: 1 + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + power-domains: + description: specifies a phandle to PM domain provider node + maxItems: 1 + + clocks: + description: + A list of phandle and clock-specifier pairs for the clocks + listed in clock-names. + items: + - description: System Config NOC clock. + - description: Master/Core clock, has to be >= 125 MHz + for SS operation and >= 60MHz for HS operation. + - description: System bus AXI clock. + - description: Mock utmi clock needed for ITP/SOF generation + in host mode. Its frequency should be 19.2MHz. + - description: Sleep clock, used for wakeup when + USB3 core goes into low power mode (U3). + + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: mock_utmi + - const: sleep + + assigned-clocks: + items: + - description: Phandle and clock specifier of MOCK_UTMI_CLK. + - description: Phandle and clock specifoer of MASTER_CLK. + + assigned-clock-rates: + maxItems: 2 + items: + - description: Must be 19.2MHz (19200000). + - description: Must be >= 60 MHz in HS mode, >= 125 MHz in SS mode. + + resets: + maxItems: 1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: usb-ddr + - const: apps-usb + + interrupts: + items: + - description: The interrupt that is asserted + when a wakeup event is received on USB2 bus. + - description: The interrupt that is asserted + when a wakeup event is received on USB3 bus. + - description: Wakeup event on DM line. + - description: Wakeup event on DP line. + + interrupt-names: + items: + - const: hs_phy_irq + - const: ss_phy_irq + - const: dm_hs_phy_irq + - const: dp_hs_phy_irq + + qcom,select-utmi-as-pipe-clk: + description: + If present, disable USB3 pipe_clk requirement. + Used when dwc3 operates without SSPHY and only + HS/FS/LS modes are supported. + type: boolean + +# Required child node: + +patternProperties: + "^dwc3@[0-9a-f]+$": + type: object + description: + A child node must exist to represent the core DWC3 IP block + The content of the node is defined in dwc3.txt. + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - power-domains + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + usb@a6f8800 { + compatible = "qcom,sdm845-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x740 0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml new file mode 100644 index 000000000000..f127535feb0b --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,keystone-dwc3.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,keystone-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Keystone Soc USB Controller + +maintainers: + - Roger Quadros <rogerq@ti.com> + +properties: + compatible: + oneOf: + - const: "ti,keystone-dwc3" + - const: "ti,am654-dwc3" + + reg: + maxItems: 1 + description: Address and length of the register set for the USB subsystem on + the SOC. + + interrupts: + maxItems: 1 + description: The irq number of this device that is used to interrupt the MPU. + + + clocks: + description: Clock ID for USB functional clock. + + power-domains: + description: Should contain a phandle to a PM domain provider node + and an args specifier containing the USB device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt + + phys: + description: + PHY specifier for the USB3.0 PHY. Some SoCs need the USB3.0 PHY + to be turned on before the controller. + Documentation/devicetree/bindings/phy/phy-bindings.txt + + phy-names: + items: + - const: "usb3-phy" + + dwc3: + description: This is the node representing the DWC3 controller instance + Documentation/devicetree/bindings/usb/dwc3.txt + +required: + - compatible + - reg + - interrupts + - clocks + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index fd179097a4bf..342697f53cf7 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1195,8 +1195,6 @@ }; usb2: gadget@fff78000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; @@ -1204,58 +1202,6 @@ clocks = <&udphs_clk>, <&utmi>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; clk32k: sckc@fffffd50 { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ea024e4b6e09..4d70194fd808 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -299,8 +299,6 @@ }; usb0: gadget@fffd4000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9rl-udc"; reg = <0x00600000 0x100000>, <0xfffd4000 0x4000>; @@ -308,58 +306,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; dma0: dma-controller@ffffe600 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 7c2eb93f8cac..948fe99ab6c3 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -867,8 +867,6 @@ }; usb2: gadget@f803c000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,at91sam9g45-udc"; reg = <0x00500000 0x80000 0xf803c000 0x400>; @@ -876,58 +874,6 @@ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "pclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; }; watchdog: watchdog@fffffe40 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index ab550d69db91..1ae7a2ea696b 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -113,8 +113,6 @@ }; usb0: gadget@300000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,sama5d3-udc"; reg = <0x00300000 0x100000 0xfc02c000 0x400>; @@ -122,124 +120,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; }; usb1: ohci@400000 { diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index f11b018e9173..10e4492af234 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1420,8 +1420,6 @@ }; usb0: gadget@500000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,sama5d3-udc"; reg = <0x00500000 0x100000 0xf8030000 0x4000>; @@ -1429,111 +1427,6 @@ clocks = <&udphs_clk>, <&utmi>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - }; }; usb1: ohci@600000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index c9c0316b5b0e..b0d79524277e 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -96,8 +96,6 @@ }; usb0: gadget@400000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "atmel,sama5d3-udc"; reg = <0x00400000 0x100000 0xfc02c000 0x4000>; @@ -105,124 +103,6 @@ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; - - ep@0 { - reg = <0>; - atmel,fifo-size = <64>; - atmel,nb-banks = <1>; - }; - - ep@1 { - reg = <1>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@2 { - reg = <2>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <3>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@3 { - reg = <3>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@4 { - reg = <4>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@5 { - reg = <5>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@6 { - reg = <6>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@7 { - reg = <7>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-dma; - atmel,can-isoc; - }; - - ep@8 { - reg = <8>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@9 { - reg = <9>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@10 { - reg = <10>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@11 { - reg = <11>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@12 { - reg = <12>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@13 { - reg = <13>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@14 { - reg = <14>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; - - ep@15 { - reg = <15>; - atmel,fifo-size = <1024>; - atmel,nb-banks = <2>; - atmel,can-isoc; - }; }; usb1: ohci@500000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi index 248b018c83d5..ed9f89ee86a8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi @@ -360,8 +360,9 @@ status = "okay"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; &usb2_phy0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 12d5e333e5f2..d853981f1ab5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -223,6 +223,7 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "otg"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts index 4d5949496596..2cfea3094f6c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts @@ -243,6 +243,7 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts index a1119cfb0280..867e30f1d62b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts @@ -216,6 +216,7 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts index b5667f1fb2c8..9ef210f17b4a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts @@ -29,3 +29,7 @@ &cvbs_vdac_port { status = "disabled"; }; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts index 6509c4950950..ecc9df7ca023 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts @@ -20,3 +20,7 @@ reg = <0x0 0x0 0x0 0x40000000>; }; }; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts index dd729ac2300d..6705c2082a78 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts @@ -24,3 +24,7 @@ &ir { linux,rc-map-name = "rc-tanix-tx3mini"; }; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts index 440bc23c7342..8bcdffdf55d0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -207,3 +207,7 @@ pinctrl-0 = <&uart_ao_b_pins>; pinctrl-names = "default"; }; + +&usb { + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index e8348b2728db..e493831a80f0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -272,8 +272,9 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; &usb2_phy0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 62dd87821ce5..f1acca5c4434 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -218,6 +218,7 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 6ac678f88bd8..05cb2f5e5c36 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -195,8 +195,9 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; &usb2_phy0 { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 259d86399390..95b301a7c725 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -14,26 +14,43 @@ compatible = "amlogic,meson-gxl"; soc { - usb0: usb@c9000000 { - status = "disabled"; - compatible = "amlogic,meson-gxl-dwc3"; + usb: usb@d0078080 { + compatible = "amlogic,meson-gxl-usb-ctrl"; + reg = <0x0 0xd0078080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <2>; #size-cells = <2>; ranges; - clocks = <&clkc CLKID_USB>; - clock-names = "usb_general"; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; resets = <&reset RESET_USB_OTG>; - reset-names = "usb_otg"; - dwc3: dwc3@c9000000 { + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; + + dwc2: usb@c9100000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@c9000000 { compatible = "snps,dwc3"; reg = <0x0 0xc9000000 0x0 0x100000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; maximum-speed = "high-speed"; snps,dis_u2_susphy_quirk; - phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>; }; }; @@ -71,18 +88,6 @@ reset-names = "phy"; status = "okay"; }; - - usb3_phy: phy@78080 { - compatible = "amlogic,meson-gxl-usb3-phy"; - #phy-cells = <0>; - reg = <0x0 0x78080 0x0 0x20>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB>, <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "phy", "peripheral"; - resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; - reset-names = "phy", "peripheral"; - status = "okay"; - }; }; &efuse { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 27eeab71ec77..bff8ec2c1c70 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -380,6 +380,7 @@ vref-supply = <&vddio_ao18>; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "peripheral"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index c2bd4dbbf38c..83eca3af44ce 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -179,6 +179,7 @@ pinctrl-names = "default"; }; -&usb0 { +&usb { status = "okay"; + dr_mode = "host"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts index 0bdf51d041ae..d3fdba4da9a6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-vega-s96.dts @@ -39,3 +39,7 @@ &ir { linux,rc-map-name = "rc-vega-s9x"; }; + +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index b6f89f108e28..40e3e123e05b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -169,8 +169,11 @@ compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; }; -&dwc3 { - phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; +&usb { + compatible = "amlogic,meson-gxm-usb-ctrl"; + + phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2"; + phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; }; &vdec { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 998f101ad623..bd0d3a7e8e8e 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1447,6 +1447,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xe000>; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 8f926b5234d4..860d5c21c1e0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3097,6 +3097,10 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>, + <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -3141,6 +3145,10 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>, + <&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>; diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 5ec53874d1ea..617cf073e9aa 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -27,18 +27,6 @@ config PHY_MESON_GXL_USB2 GXL and GXM SoCs. If unsure, say N. -config PHY_MESON_GXL_USB3 - tristate "Meson GXL and GXM USB3 PHY drivers" - default ARCH_MESON - depends on OF && (ARCH_MESON || COMPILE_TEST) - depends on USB_SUPPORT - select GENERIC_PHY - select REGMAP_MMIO - help - Enable this to support the Meson USB3 PHY and OTG detection - IP block found in Meson GXL and GXM SoCs. - If unsure, say N. - config PHY_MESON_G12A_USB2 tristate "Meson G12A USB2 PHY driver" default ARCH_MESON diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index e2baa133f7af..99702a45e9be 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -2,7 +2,6 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb3.c b/drivers/phy/amlogic/phy-meson-gxl-usb3.c deleted file mode 100644 index c0e9e4c16149..000000000000 --- a/drivers/phy/amlogic/phy-meson-gxl-usb3.c +++ /dev/null @@ -1,283 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meson GXL USB3 PHY and OTG mode detection driver - * - * Copyright (C) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - */ - -#include <linux/bitfield.h> -#include <linux/bitops.h> -#include <linux/clk.h> -#include <linux/module.h> -#include <linux/of_device.h> -#include <linux/phy/phy.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <linux/platform_device.h> - -#define USB_R0 0x00 - #define USB_R0_P30_FSEL_MASK GENMASK(5, 0) - #define USB_R0_P30_PHY_RESET BIT(6) - #define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7) - #define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8) - #define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9) - #define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14) - #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) - #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) - #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) - #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) - #define USB_R0_U2D_ACT BIT(31) - -#define USB_R1 0x04 - #define USB_R1_U3H_BIGENDIAN_GS BIT(0) - #define USB_R1_U3H_PME_ENABLE BIT(1) - #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2) - #define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7) - #define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12) - #define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16) - #define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17) - #define USB_R1_U3H_HOST_MSI_ENABLE BIT(18) - #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) - #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) - -#define USB_R2 0x08 - #define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0) - #define USB_R2_P30_CR_READ BIT(16) - #define USB_R2_P30_CR_WRITE BIT(17) - #define USB_R2_P30_CR_CAP_ADDR BIT(18) - #define USB_R2_P30_CR_CAP_DATA BIT(19) - #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) - #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) - -#define USB_R3 0x0c - #define USB_R3_P30_SSC_ENABLE BIT(0) - #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) - #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) - #define USB_R3_P30_REF_SSP_EN BIT(13) - #define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16) - #define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19) - #define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24) - -#define USB_R4 0x10 - #define USB_R4_P21_PORT_RESET_0 BIT(0) - #define USB_R4_P21_SLEEP_M0 BIT(1) - #define USB_R4_MEM_PD_MASK GENMASK(3, 2) - #define USB_R4_P21_ONLY BIT(4) - -#define USB_R5 0x14 - #define USB_R5_ID_DIG_SYNC BIT(0) - #define USB_R5_ID_DIG_REG BIT(1) - #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) - #define USB_R5_ID_DIG_EN_0 BIT(4) - #define USB_R5_ID_DIG_EN_1 BIT(5) - #define USB_R5_ID_DIG_CURR BIT(6) - #define USB_R5_ID_DIG_IRQ BIT(7) - #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) - #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) - -/* read-only register */ -#define USB_R6 0x18 - #define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0) - #define USB_R6_P30_CR_ACK BIT(16) - -struct phy_meson_gxl_usb3_priv { - struct regmap *regmap; - enum phy_mode mode; - struct clk *clk_phy; - struct clk *clk_peripheral; - struct reset_control *reset; -}; - -static const struct regmap_config phy_meson_gxl_usb3_regmap_conf = { - .reg_bits = 8, - .val_bits = 32, - .reg_stride = 4, - .max_register = USB_R6, -}; - -static int phy_meson_gxl_usb3_power_on(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, - USB_R5_ID_DIG_EN_0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, - USB_R5_ID_DIG_EN_1); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_TH_MASK, - FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff)); - - return 0; -} - -static int phy_meson_gxl_usb3_power_off(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_0, 0); - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_EN_1, 0); - - return 0; -} - -static int phy_meson_gxl_usb3_set_mode(struct phy *phy, - enum phy_mode mode, int submode) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - switch (mode) { - case PHY_MODE_USB_HOST: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, 0); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - 0); - break; - - case PHY_MODE_USB_DEVICE: - regmap_update_bits(priv->regmap, USB_R0, USB_R0_U2D_ACT, - USB_R0_U2D_ACT); - regmap_update_bits(priv->regmap, USB_R4, USB_R4_P21_SLEEP_M0, - USB_R4_P21_SLEEP_M0); - break; - - default: - dev_err(&phy->dev, "unsupported PHY mode %d\n", mode); - return -EINVAL; - } - - priv->mode = mode; - - return 0; -} - -static int phy_meson_gxl_usb3_init(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - int ret; - - ret = reset_control_reset(priv->reset); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_phy); - if (ret) - goto err; - - ret = clk_prepare_enable(priv->clk_peripheral); - if (ret) - goto err_disable_clk_phy; - - ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0); - if (ret) - goto err_disable_clk_peripheral; - - regmap_update_bits(priv->regmap, USB_R1, - USB_R1_U3H_FLADJ_30MHZ_REG_MASK, - FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20)); - - return 0; - -err_disable_clk_peripheral: - clk_disable_unprepare(priv->clk_peripheral); -err_disable_clk_phy: - clk_disable_unprepare(priv->clk_phy); -err: - return ret; -} - -static int phy_meson_gxl_usb3_exit(struct phy *phy) -{ - struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy); - - clk_disable_unprepare(priv->clk_peripheral); - clk_disable_unprepare(priv->clk_phy); - - return 0; -} - -static const struct phy_ops phy_meson_gxl_usb3_ops = { - .power_on = phy_meson_gxl_usb3_power_on, - .power_off = phy_meson_gxl_usb3_power_off, - .set_mode = phy_meson_gxl_usb3_set_mode, - .init = phy_meson_gxl_usb3_init, - .exit = phy_meson_gxl_usb3_exit, - .owner = THIS_MODULE, -}; - -static int phy_meson_gxl_usb3_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct phy_meson_gxl_usb3_priv *priv; - struct resource *res; - struct phy *phy; - struct phy_provider *phy_provider; - void __iomem *base; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - base = devm_ioremap_resource(dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv->regmap = devm_regmap_init_mmio(dev, base, - &phy_meson_gxl_usb3_regmap_conf); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - priv->clk_phy = devm_clk_get(dev, "phy"); - if (IS_ERR(priv->clk_phy)) - return PTR_ERR(priv->clk_phy); - - priv->clk_peripheral = devm_clk_get(dev, "peripheral"); - if (IS_ERR(priv->clk_peripheral)) - return PTR_ERR(priv->clk_peripheral); - - priv->reset = devm_reset_control_array_get_shared(dev); - if (IS_ERR(priv->reset)) - return PTR_ERR(priv->reset); - - /* - * default to host mode as hardware defaults and/or boot-loader - * behavior can result in this PHY starting up in device mode. this - * default and the initialization in phy_meson_gxl_usb3_init ensure - * that we reproducibly start in a known mode on all devices. - */ - priv->mode = PHY_MODE_USB_HOST; - - phy = devm_phy_create(dev, np, &phy_meson_gxl_usb3_ops); - if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret != -EPROBE_DEFER) - dev_err(dev, "failed to create PHY\n"); - - return ret; - } - - phy_set_drvdata(phy, priv); - - phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - - return PTR_ERR_OR_ZERO(phy_provider); -} - -static const struct of_device_id phy_meson_gxl_usb3_of_match[] = { - { .compatible = "amlogic,meson-gxl-usb3-phy", }, - { }, -}; -MODULE_DEVICE_TABLE(of, phy_meson_gxl_usb3_of_match); - -static struct platform_driver phy_meson_gxl_usb3_driver = { - .probe = phy_meson_gxl_usb3_probe, - .driver = { - .name = "phy-meson-gxl-usb3", - .of_match_table = phy_meson_gxl_usb3_of_match, - }, -}; -module_platform_driver(phy_meson_gxl_usb3_driver); - -MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -MODULE_DESCRIPTION("Meson GXL USB3 PHY and OTG detection driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/cdns3/cdns3-ti.c b/drivers/usb/cdns3/cdns3-ti.c index 5685ba11480b..e701ab56b0a7 100644 --- a/drivers/usb/cdns3/cdns3-ti.c +++ b/drivers/usb/cdns3/cdns3-ti.c @@ -138,7 +138,7 @@ static int cdns_ti_probe(struct platform_device *pdev) error = pm_runtime_get_sync(dev); if (error < 0) { dev_err(dev, "pm_runtime_get_sync failed: %d\n", error); - goto err_get; + goto err; } /* assert RESET */ @@ -185,7 +185,6 @@ static int cdns_ti_probe(struct platform_device *pdev) err: pm_runtime_put_sync(data->dev); -err_get: pm_runtime_disable(data->dev); return error; diff --git a/drivers/usb/cdns3/ep0.c b/drivers/usb/cdns3/ep0.c index e71240b386b4..82645a2a0f52 100644 --- a/drivers/usb/cdns3/ep0.c +++ b/drivers/usb/cdns3/ep0.c @@ -332,13 +332,6 @@ static int cdns3_ep0_feature_handle_device(struct cdns3_device *priv_dev, case TEST_K: case TEST_SE0_NAK: case TEST_PACKET: - cdns3_ep0_complete_setup(priv_dev, 0, 1); - /** - * Little delay to give the controller some time - * for sending status stage. - * This time should be less then 3ms. - */ - mdelay(1); cdns3_set_register_bit(&priv_dev->regs->usb_cmd, USB_CMD_STMODE | USB_STS_TMODE_SEL(tmode - 1)); diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index 559e5c01c2b0..5e24c2e57c0d 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -512,8 +512,8 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep, } static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev, - struct cdns3_endpoint *priv_ep, - struct cdns3_request *priv_req) + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) { if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN && priv_req->flags & REQUEST_INTERNAL) { @@ -552,8 +552,8 @@ static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_d } static int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev, - struct cdns3_endpoint *priv_ep, - struct cdns3_request *priv_req) + struct cdns3_endpoint *priv_ep, + struct cdns3_request *priv_req) { int deferred = 0; @@ -1905,7 +1905,7 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev, } static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev, - struct cdns3_endpoint *priv_ep) + struct cdns3_endpoint *priv_ep) { if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER) return; @@ -1926,7 +1926,7 @@ static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev, } static void cdns3_configure_dmult(struct cdns3_device *priv_dev, - struct cdns3_endpoint *priv_ep) + struct cdns3_endpoint *priv_ep) { struct cdns3_usb_regs __iomem *regs = priv_dev->regs; @@ -3069,6 +3069,7 @@ static int cdns3_gadget_start(struct cdns3 *cdns) priv_dev->gadget.name = "usb-ss-gadget"; priv_dev->gadget.sg_supported = 1; priv_dev->gadget.quirk_avoids_skb_reserve = 1; + priv_dev->gadget.irq = cdns->dev_irq; spin_lock_init(&priv_dev->lock); INIT_WORK(&priv_dev->pending_status_wq, diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 78a4925aa118..fec17a2d2447 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -524,10 +524,25 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait) greset |= GRSTCTL_CSFTRST; dwc2_writel(hsotg, greset, GRSTCTL); - if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_CSFTRST, 10000)) { - dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL GRSTCTL_CSFTRST\n", - __func__); - return -EBUSY; + if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) < + (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) { + if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, + GRSTCTL_CSFTRST, 10000)) { + dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n", + __func__); + return -EBUSY; + } + } else { + if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, + GRSTCTL_CSFTRST_DONE, 10000)) { + dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n", + __func__); + return -EBUSY; + } + greset = dwc2_readl(hsotg, GRSTCTL); + greset &= ~GRSTCTL_CSFTRST; + greset |= GRSTCTL_CSFTRST_DONE; + dwc2_writel(hsotg, greset, GRSTCTL); } /* Wait for AHB master IDLE state */ diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 668d1ad646a4..132d687f1590 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -1103,8 +1103,10 @@ struct dwc2_hsotg { #define DWC2_CORE_REV_3_00a 0x4f54300a #define DWC2_CORE_REV_3_10a 0x4f54310a #define DWC2_CORE_REV_4_00a 0x4f54400a +#define DWC2_CORE_REV_4_20a 0x4f54420a #define DWC2_FS_IOT_REV_1_00a 0x5531100a #define DWC2_HS_IOT_REV_1_00a 0x5532100a +#define DWC2_CORE_REV_MASK 0x0000ffff /* DWC OTG HW Core ID */ #define DWC2_OTG_ID 0x4f540000 @@ -1309,6 +1311,8 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg); bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg); +int dwc2_check_core_version(struct dwc2_hsotg *hsotg); + /* * Common core Functions. * The following functions support managing the DWC_otg controller in either diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 876ff31261d5..55f1d14fc414 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -416,10 +416,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg) if (ret && (ret != -ENOTSUPP)) dev_err(hsotg->dev, "exit power_down failed\n"); + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; call_gadget(hsotg, resume); + } else { + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; } - /* Change to L0 state */ - hsotg->lx_state = DWC2_L0; } else { if (hsotg->params.power_down) return; diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 864b76a0b954..c3d6dde2aca4 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -126,6 +126,7 @@ #define GRSTCTL HSOTG_REG(0x010) #define GRSTCTL_AHBIDLE BIT(31) #define GRSTCTL_DMAREQ BIT(30) +#define GRSTCTL_CSFTRST_DONE BIT(29) #define GRSTCTL_TXFNUM_MASK (0x1f << 6) #define GRSTCTL_TXFNUM_SHIFT 6 #define GRSTCTL_TXFNUM_LIMIT 0x1f diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 8ccc83f7eb3f..ce736d67c7c3 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -782,25 +782,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4; u32 grxfsiz; - /* - * Attempt to ensure this device is really a DWC_otg Controller. - * Read and verify the GSNPSID register contents. The value should be - * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx - */ - - hw->snpsid = dwc2_readl(hsotg, GSNPSID); - if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && - (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && - (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { - dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", - hw->snpsid); - return -ENODEV; - } - - dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", - hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, - hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); - hwcfg1 = dwc2_readl(hsotg, GHWCFG1); hwcfg2 = dwc2_readl(hsotg, GHWCFG2); hwcfg3 = dwc2_readl(hsotg, GHWCFG3); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 69972750e161..e571c8ae65ec 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -363,6 +363,37 @@ static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg) } /** + * Check core version + * + * @hsotg: Programming view of the DWC_otg controller + * + */ +int dwc2_check_core_version(struct dwc2_hsotg *hsotg) +{ + struct dwc2_hw_params *hw = &hsotg->hw_params; + + /* + * Attempt to ensure this device is really a DWC_otg Controller. + * Read and verify the GSNPSID register contents. The value should be + * 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx + */ + + hw->snpsid = dwc2_readl(hsotg, GSNPSID); + if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID && + (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) { + dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", + hw->snpsid); + return -ENODEV; + } + + dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n", + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + return 0; +} + +/** * dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg * driver * @@ -445,6 +476,14 @@ static int dwc2_driver_probe(struct platform_device *dev) "snps,need-phy-for-wake"); /* + * Before performing any core related operations + * check core version. + */ + retval = dwc2_check_core_version(hsotg); + if (retval) + goto error; + + /* * Reset before dwc2_get_hwparams() then it could get power-on real * reset value form registers. */ diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index edc17155cb2b..25c686a752b0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -85,7 +85,9 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc) * specified or set to OTG, then set the mode to peripheral. */ if (mode == USB_DR_MODE_OTG && - dwc->revision >= DWC3_REVISION_330A) + (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) || + !device_property_read_bool(dwc->dev, "usb-role-switch")) && + !DWC3_VER_IS_PRIOR(DWC3, 330A)) mode = USB_DR_MODE_PERIPHERAL; } @@ -121,17 +123,19 @@ static void __dwc3_set_mode(struct work_struct *work) if (dwc->dr_mode != USB_DR_MODE_OTG) return; + pm_runtime_get_sync(dwc->dev); + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_OTG) dwc3_otg_update(dwc, 0); if (!dwc->desired_dr_role) - return; + goto out; if (dwc->desired_dr_role == dwc->current_dr_role) - return; + goto out; if (dwc->desired_dr_role == DWC3_GCTL_PRTCAP_OTG && dwc->edev) - return; + goto out; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_HOST: @@ -190,6 +194,9 @@ static void __dwc3_set_mode(struct work_struct *work) break; } +out: + pm_runtime_mark_last_busy(dwc->dev); + pm_runtime_put_autosuspend(dwc->dev); } void dwc3_set_mode(struct dwc3 *dwc, u32 mode) @@ -257,7 +264,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) * take a little more than 50ms. Set the polling rate at 20ms * for 10 times instead. */ - if (dwc3_is_usb31(dwc) && dwc->revision >= DWC3_USB31_REVISION_190A) + if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32)) retries = 10; do { @@ -265,8 +272,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc) if (!(reg & DWC3_DCTL_CSFTRST)) goto done; - if (dwc3_is_usb31(dwc) && - dwc->revision >= DWC3_USB31_REVISION_190A) + if (DWC3_VER_IS_WITHIN(DWC31, 190A, ANY) || DWC3_IP_IS(DWC32)) msleep(20); else udelay(1); @@ -283,7 +289,7 @@ done: * is cleared, we must wait at least 50ms before accessing the PHY * domain (synchronization delay). */ - if (dwc3_is_usb31(dwc) && dwc->revision <= DWC3_USB31_REVISION_180A) + if (DWC3_VER_IS_WITHIN(DWC31, ANY, 180A)) msleep(50); return 0; @@ -298,7 +304,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc) u32 reg; u32 dft; - if (dwc->revision < DWC3_REVISION_250A) + if (DWC3_VER_IS_PRIOR(DWC3, 250A)) return; if (dwc->fladj == 0) @@ -579,7 +585,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) * will be '0' when the core is reset. Application needs to set it * to '1' after the core initialization is completed. */ - if (dwc->revision > DWC3_REVISION_194A) + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) reg |= DWC3_GUSB3PIPECTL_SUSPHY; /* @@ -670,7 +676,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) * be '0' when the core is reset. Application needs to set it to * '1' after the core initialization is completed. */ - if (dwc->revision > DWC3_REVISION_194A) + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) reg |= DWC3_GUSB2PHYCFG_SUSPHY; /* @@ -719,15 +725,13 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GSNPSID); + dwc->ip = DWC3_GSNPS_ID(reg); /* This should read as U3 followed by revision number */ - if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) { - /* Detected DWC_usb3 IP */ + if (DWC3_IP_IS(DWC3)) { dwc->revision = reg; - } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) { - /* Detected DWC_usb31 IP */ + } else if (DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) { dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER); - dwc->revision |= DWC3_REVISION_IS_DWC31; dwc->version_type = dwc3_readl(dwc->regs, DWC3_VER_TYPE); } else { return false; @@ -760,8 +764,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) */ if ((dwc->dr_mode == USB_DR_MODE_HOST || dwc->dr_mode == USB_DR_MODE_OTG) && - (dwc->revision >= DWC3_REVISION_210A && - dwc->revision <= DWC3_REVISION_250A)) + DWC3_VER_IS_WITHIN(DWC3, 210A, 250A)) reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; else reg &= ~DWC3_GCTL_DSBLCLKGTNG; @@ -804,7 +807,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) * and falls back to high-speed mode which causes * the device to enter a Connect/Disconnect loop */ - if (dwc->revision < DWC3_REVISION_190A) + if (DWC3_VER_IS_PRIOR(DWC3, 190A)) reg |= DWC3_GCTL_U2RSTECN; dwc3_writel(dwc->regs, DWC3_GCTL, reg); @@ -957,7 +960,7 @@ static int dwc3_core_init(struct dwc3 *dwc) goto err0a; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && - dwc->revision > DWC3_REVISION_194A) { + !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { if (!dwc->dis_u3_susphy_quirk) { reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); reg |= DWC3_GUSB3PIPECTL_SUSPHY; @@ -1004,20 +1007,20 @@ static int dwc3_core_init(struct dwc3 *dwc) * the DWC_usb3 controller. It is NOT available in the * DWC_usb31 controller. */ - if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) { + if (DWC3_VER_IS_WITHIN(DWC3, 310A, ANY)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); reg |= DWC3_GUCTL2_RST_ACTBITLATER; dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); } - if (dwc->revision >= DWC3_REVISION_250A) { + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); /* * Enable hardware control of sending remote wakeup * in HS when the device is in the L1 state. */ - if (dwc->revision >= DWC3_REVISION_290A) + if (!DWC3_VER_IS_PRIOR(DWC3, 290A)) reg |= DWC3_GUCTL1_DEV_L1_EXIT_BY_HW; if (dwc->dis_tx_ipgap_linecheck_quirk) @@ -1049,7 +1052,7 @@ static int dwc3_core_init(struct dwc3 *dwc) * Must config both number of packets and max burst settings to enable * RX and/or TX threshold. */ - if (dwc3_is_usb31(dwc) && dwc->dr_mode == USB_DR_MODE_HOST) { + if (!DWC3_IP_IS(DWC3) && dwc->dr_mode == USB_DR_MODE_HOST) { u8 rx_thr_num = dwc->rx_thr_num_pkt_prd; u8 rx_maxburst = dwc->rx_max_burst_prd; u8 tx_thr_num = dwc->tx_thr_num_pkt_prd; @@ -1371,10 +1374,9 @@ static void dwc3_get_properties(struct dwc3 *dwc) /* check whether the core supports IMOD */ bool dwc3_has_imod(struct dwc3 *dwc) { - return ((dwc3_is_usb3(dwc) && - dwc->revision >= DWC3_REVISION_300A) || - (dwc3_is_usb31(dwc) && - dwc->revision >= DWC3_USB31_REVISION_120A)); + return DWC3_VER_IS_WITHIN(DWC3, 300A, ANY) || + DWC3_VER_IS_WITHIN(DWC31, 120A, ANY) || + DWC3_IP_IS(DWC32); } static void dwc3_check_params(struct dwc3 *dwc) @@ -1395,7 +1397,7 @@ static void dwc3_check_params(struct dwc3 *dwc) * affected version. */ if (!dwc->imod_interval && - (dwc->revision == DWC3_REVISION_300A)) + DWC3_VER_IS(DWC3, 300A)) dwc->imod_interval = 1; /* Check the maximum_speed parameter */ @@ -1417,7 +1419,7 @@ static void dwc3_check_params(struct dwc3 *dwc) /* * default to superspeed plus if we are capable. */ - if (dwc3_is_usb31(dwc) && + if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) && (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) == DWC3_GHWPARAMS3_SSPHY_IFC_GEN2)) dwc->maximum_speed = USB_SPEED_SUPER_PLUS; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4c171a8e215f..013f42a2b5dc 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * core.h - DesignWare USB3 DRD Core Header * @@ -69,6 +69,7 @@ #define DWC3_GEVNTCOUNT_EHB BIT(31) #define DWC3_GSNPSID_MASK 0xffff0000 #define DWC3_GSNPSREV_MASK 0xffff +#define DWC3_GSNPS_ID(p) (((p) & DWC3_GSNPSID_MASK) >> 16) /* DWC3 registers memory space boundries */ #define DWC3_XHCI_REGS_START 0x0 @@ -365,6 +366,9 @@ #define DWC3_GHWPARAMS6_SRPSUPPORT BIT(10) #define DWC3_GHWPARAMS6_EN_FPGA BIT(7) +/* DWC_usb32 only */ +#define DWC3_GHWPARAMS6_MDWIDTH(n) ((n) & (0x3 << 8)) + /* Global HWPARAMS7 Register */ #define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff) #define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff) @@ -491,6 +495,7 @@ #define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09 #define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c +#define DWC3_DGCMD_SET_ENDPOINT_PRIME 0x0d #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 #define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) @@ -697,6 +702,10 @@ struct dwc3_ep { #define DWC3_EP_END_TRANSFER_PENDING BIT(4) #define DWC3_EP_PENDING_REQUEST BIT(5) #define DWC3_EP_DELAY_START BIT(6) +#define DWC3_EP_WAIT_TRANSFER_COMPLETE BIT(7) +#define DWC3_EP_IGNORE_NEXT_NOSTREAM BIT(8) +#define DWC3_EP_FORCE_RESTART_STREAM BIT(9) +#define DWC3_EP_FIRST_STREAM_PRIMED BIT(10) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) @@ -949,7 +958,8 @@ struct dwc3_scratchpad_array { * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) - * @revision: revision register contents + * @ip: controller's ID + * @revision: controller's version of an IP * @version_type: VERSIONTYPE register contents, a sub release of a revision * @dr_mode: requested mode of operation * @current_dr_role: current role of operation when in dual-role mode @@ -1110,15 +1120,15 @@ struct dwc3 { u32 u1u2; u32 maximum_speed; - /* - * All 3.1 IP version constants are greater than the 3.0 IP - * version constants. This works for most version checks in - * dwc3. However, in the future, this may not apply as - * features may be developed on newer versions of the 3.0 IP - * that are not in the 3.1 IP. - */ + u32 ip; + +#define DWC3_IP 0x5533 +#define DWC31_IP 0x3331 +#define DWC32_IP 0x3332 + u32 revision; +#define DWC3_REVISION_ANY 0x0 #define DWC3_REVISION_173A 0x5533173a #define DWC3_REVISION_175A 0x5533175a #define DWC3_REVISION_180A 0x5533180a @@ -1143,20 +1153,20 @@ struct dwc3 { #define DWC3_REVISION_310A 0x5533310a #define DWC3_REVISION_330A 0x5533330a -/* - * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really - * just so dwc31 revisions are always larger than dwc3. - */ -#define DWC3_REVISION_IS_DWC31 0x80000000 -#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) -#define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) -#define DWC3_USB31_REVISION_160A (0x3136302a | DWC3_REVISION_IS_DWC31) -#define DWC3_USB31_REVISION_170A (0x3137302a | DWC3_REVISION_IS_DWC31) -#define DWC3_USB31_REVISION_180A (0x3138302a | DWC3_REVISION_IS_DWC31) -#define DWC3_USB31_REVISION_190A (0x3139302a | DWC3_REVISION_IS_DWC31) +#define DWC31_REVISION_ANY 0x0 +#define DWC31_REVISION_110A 0x3131302a +#define DWC31_REVISION_120A 0x3132302a +#define DWC31_REVISION_160A 0x3136302a +#define DWC31_REVISION_170A 0x3137302a +#define DWC31_REVISION_180A 0x3138302a +#define DWC31_REVISION_190A 0x3139302a + +#define DWC32_REVISION_ANY 0x0 +#define DWC32_REVISION_100A 0x3130302a u32 version_type; +#define DWC31_VERSIONTYPE_ANY 0x0 #define DWC31_VERSIONTYPE_EA01 0x65613031 #define DWC31_VERSIONTYPE_EA02 0x65613032 #define DWC31_VERSIONTYPE_EA03 0x65613033 @@ -1298,6 +1308,10 @@ struct dwc3_event_depevt { #define DEPEVT_STREAMEVT_FOUND 1 #define DEPEVT_STREAMEVT_NOTFOUND 2 +/* Stream event parameter */ +#define DEPEVT_STREAM_PRIME 0xfffe +#define DEPEVT_STREAM_NOSTREAM 0x0 + /* Control-only Status */ #define DEPEVT_STATUS_CONTROL_DATA 1 #define DEPEVT_STATUS_CONTROL_STATUS 2 @@ -1400,17 +1414,26 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode); void dwc3_set_mode(struct dwc3 *dwc, u32 mode); u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); -/* check whether we are on the DWC_usb3 core */ -static inline bool dwc3_is_usb3(struct dwc3 *dwc) -{ - return !(dwc->revision & DWC3_REVISION_IS_DWC31); -} +#define DWC3_IP_IS(_ip) \ + (dwc->ip == _ip##_IP) -/* check whether we are on the DWC_usb31 core */ -static inline bool dwc3_is_usb31(struct dwc3 *dwc) -{ - return !!(dwc->revision & DWC3_REVISION_IS_DWC31); -} +#define DWC3_VER_IS(_ip, _ver) \ + (DWC3_IP_IS(_ip) && dwc->revision == _ip##_REVISION_##_ver) + +#define DWC3_VER_IS_PRIOR(_ip, _ver) \ + (DWC3_IP_IS(_ip) && dwc->revision < _ip##_REVISION_##_ver) + +#define DWC3_VER_IS_WITHIN(_ip, _from, _to) \ + (DWC3_IP_IS(_ip) && \ + dwc->revision >= _ip##_REVISION_##_from && \ + (!(_ip##_REVISION_##_to) || \ + dwc->revision <= _ip##_REVISION_##_to)) + +#define DWC3_VER_TYPE_IS_WITHIN(_ip, _ver, _from, _to) \ + (DWC3_VER_IS(_ip, _ver) && \ + dwc->version_type >= _ip##_VERSIONTYPE_##_from && \ + (!(_ip##_VERSIONTYPE_##_to) || \ + dwc->version_type <= _ip##_VERSIONTYPE_##_to)) bool dwc3_has_imod(struct dwc3 *dwc); diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 4a13ceaf4093..d8f600e0e88f 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /** * debug.h - DesignWare USB3 DRD Controller Debug Header * @@ -68,6 +68,8 @@ dwc3_gadget_generic_cmd_string(u8 cmd) return "All FIFO Flush"; case DWC3_DGCMD_SET_ENDPOINT_NRDY: return "Set Endpoint NRDY"; + case DWC3_DGCMD_SET_ENDPOINT_PRIME: + return "Set Endpoint Prime"; case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK: return "Run SoC Bus Loopback Test"; default: diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 4fe8b1e1485c..6d9de334e46a 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -635,13 +635,18 @@ static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; unsigned long flags; + int mdwidth; u32 val; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_TXFIFO); /* Convert to bytes */ - val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + if (DWC3_IP_IS(DWC32)) + mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6); + + val *= mdwidth; val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); @@ -654,13 +659,18 @@ static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) struct dwc3_ep *dep = s->private; struct dwc3 *dwc = dep->dwc; unsigned long flags; + int mdwidth; u32 val; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_RXFIFO); /* Convert to bytes */ - val *= DWC3_MDWIDTH(dwc->hwparams.hwparams0); + mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + if (DWC3_IP_IS(DWC32)) + mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6); + + val *= mdwidth; val >>= 3; seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 7db1ffc92bbd..2e483448d695 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -56,7 +56,7 @@ static irqreturn_t dwc3_otg_thread_irq(int irq, void *_dwc) spin_lock(&dwc->lock); if (dwc->otg_restart_host) { dwc3_otg_host_init(dwc); - dwc->otg_restart_host = 0; + dwc->otg_restart_host = false; } spin_unlock(&dwc->lock); @@ -82,7 +82,7 @@ static irqreturn_t dwc3_otg_irq(int irq, void *_dwc) if (dwc->current_otg_role == DWC3_OTG_ROLE_HOST && !(reg & DWC3_OEVT_DEVICEMODE)) - dwc->otg_restart_host = 1; + dwc->otg_restart_host = true; dwc3_writel(dwc->regs, DWC3_OEVT, reg); ret = IRQ_WAKE_THREAD; } @@ -653,6 +653,6 @@ void dwc3_drd_exit(struct dwc3 *dwc) break; } - if (!dwc->edev) + if (dwc->otg_irq) free_irq(dwc->otg_irq, dwc); } diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c index 1e14a6f4884b..6505f7bd69e2 100644 --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -14,6 +14,7 @@ #include <linux/dma-mapping.h> #include <linux/io.h> #include <linux/of_platform.h> +#include <linux/phy/phy.h> #include <linux/pm_runtime.h> /* USBSS register offsets */ @@ -34,6 +35,7 @@ struct dwc3_keystone { struct device *dev; void __iomem *usbss; + struct phy *usb3_phy; }; static inline u32 kdwc3_readl(void __iomem *base, u32 offset) @@ -95,8 +97,38 @@ static int kdwc3_probe(struct platform_device *pdev) if (IS_ERR(kdwc->usbss)) return PTR_ERR(kdwc->usbss); - pm_runtime_enable(kdwc->dev); + /* PSC dependency on AM65 needs SERDES0 to be powered before USB0 */ + kdwc->usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); + if (IS_ERR(kdwc->usb3_phy)) { + error = PTR_ERR(kdwc->usb3_phy); + if (error != -EPROBE_DEFER) + dev_err(dev, "couldn't get usb3 phy: %d\n", error); + + return error; + } + + phy_pm_runtime_get_sync(kdwc->usb3_phy); + error = phy_reset(kdwc->usb3_phy); + if (error < 0) { + dev_err(dev, "usb3 phy reset failed: %d\n", error); + return error; + } + + error = phy_init(kdwc->usb3_phy); + if (error < 0) { + dev_err(dev, "usb3 phy init failed: %d\n", error); + return error; + } + + error = phy_power_on(kdwc->usb3_phy); + if (error < 0) { + dev_err(dev, "usb3 phy power on failed: %d\n", error); + phy_exit(kdwc->usb3_phy); + return error; + } + + pm_runtime_enable(kdwc->dev); error = pm_runtime_get_sync(kdwc->dev); if (error < 0) { dev_err(kdwc->dev, "pm_runtime_get_sync failed, error %d\n", @@ -138,6 +170,9 @@ err_core: err_irq: pm_runtime_put_sync(kdwc->dev); pm_runtime_disable(kdwc->dev); + phy_power_off(kdwc->usb3_phy); + phy_exit(kdwc->usb3_phy); + phy_pm_runtime_put_sync(kdwc->usb3_phy); return error; } @@ -163,6 +198,10 @@ static int kdwc3_remove(struct platform_device *pdev) pm_runtime_put_sync(kdwc->dev); pm_runtime_disable(kdwc->dev); + phy_power_off(kdwc->usb3_phy); + phy_exit(kdwc->usb3_phy); + phy_pm_runtime_put_sync(kdwc->usb3_phy); + platform_set_drvdata(pdev, NULL); return 0; diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c index b81d085bc534..bd744e82cad4 100644 --- a/drivers/usb/dwc3/dwc3-meson-g12a.c +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c @@ -30,7 +30,7 @@ #include <linux/usb/role.h> #include <linux/regulator/consumer.h> -/* USB2 Ports Control Registers */ +/* USB2 Ports Control Registers, offsets are per-port */ #define U2P_REG_SIZE 0x20 @@ -50,14 +50,16 @@ /* USB Glue Control Registers */ -#define USB_R0 0x80 +#define G12A_GLUE_OFFSET 0x80 + +#define USB_R0 0x00 #define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17) #define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18) #define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19) #define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29) #define USB_R0_U2D_ACT BIT(31) -#define USB_R1 0x84 +#define USB_R1 0x04 #define USB_R1_U3H_BIGENDIAN_GS BIT(0) #define USB_R1_U3H_PME_ENABLE BIT(1) #define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(4, 2) @@ -69,23 +71,23 @@ #define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19) #define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25) -#define USB_R2 0x88 +#define USB_R2 0x08 #define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20) #define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26) -#define USB_R3 0x8c +#define USB_R3 0x0c #define USB_R3_P30_SSC_ENABLE BIT(0) #define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1) #define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4) #define USB_R3_P30_REF_SSP_EN BIT(13) -#define USB_R4 0x90 +#define USB_R4 0x10 #define USB_R4_P21_PORT_RESET_0 BIT(0) #define USB_R4_P21_SLEEP_M0 BIT(1) #define USB_R4_MEM_PD_MASK GENMASK(3, 2) #define USB_R4_P21_ONLY BIT(4) -#define USB_R5 0x94 +#define USB_R5 0x14 #define USB_R5_ID_DIG_SYNC BIT(0) #define USB_R5_ID_DIG_REG BIT(1) #define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2) @@ -96,15 +98,12 @@ #define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8) #define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16) -enum { - USB2_HOST_PHY = 0, - USB2_OTG_PHY, - USB3_HOST_PHY, - PHY_COUNT, -}; +#define PHY_COUNT 3 +#define USB2_OTG_PHY 1 -static const char *phy_names[PHY_COUNT] = { - "usb2-phy0", "usb2-phy1", "usb3-phy0", +static struct clk_bulk_data meson_gxl_clocks[] = { + { .id = "usb_ctrl" }, + { .id = "ddr" }, }; static struct clk_bulk_data meson_g12a_clocks[] = { @@ -117,27 +116,133 @@ static struct clk_bulk_data meson_a1_clocks[] = { { .id = "xtal_usb_ctrl" }, }; +static const char *meson_gxm_phy_names[] = { + "usb2-phy0", "usb2-phy1", "usb2-phy2", +}; + +static const char *meson_g12a_phy_names[] = { + "usb2-phy0", "usb2-phy1", "usb3-phy0", +}; + +/* + * Amlogic A1 has a single physical PHY, in slot 1, but still has the + * two U2 PHY controls register blocks like G12A. + * Handling the first PHY on slot 1 would need a large amount of code + * changes, and the current management is generic enough to handle it + * correctly when only the "usb2-phy1" phy is specified on-par with the + * DT bindings. + */ +static const char *meson_a1_phy_names[] = { + "usb2-phy0", "usb2-phy1" +}; + +struct dwc3_meson_g12a; + struct dwc3_meson_g12a_drvdata { bool otg_switch_supported; + bool otg_phy_host_port_disable; struct clk_bulk_data *clks; int num_clks; + const char **phy_names; + int num_phys; + int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base); + int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode); + int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode); + int (*usb_init)(struct dwc3_meson_g12a *priv); + int (*usb_post_init)(struct dwc3_meson_g12a *priv); +}; + +static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv, + void __iomem *base); +static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv, + void __iomem *base); + +static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode); +static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode); + +static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv, + int i, enum phy_mode mode); +static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv, + int i, enum phy_mode mode); + +static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv); +static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv); + +static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv); + +/* + * For GXL and GXM SoCs: + * USB Phy muxing between the DWC2 Device controller and the DWC3 Host + * controller is buggy when switching from Device to Host when USB port + * is unpopulated, it causes the DWC3 to hard crash. + * When populated (including OTG switching with ID pin), the switch works + * like a charm like on the G12A platforms. + * In order to still switch from Host to Device on an USB Type-A port, + * an U2_PORT_DISABLE bit has been added to disconnect the DWC3 Host + * controller from the port, but when used the DWC3 controller must be + * reset to recover usage of the port. + */ + +static struct dwc3_meson_g12a_drvdata gxl_drvdata = { + .otg_switch_supported = true, + .otg_phy_host_port_disable = true, + .clks = meson_gxl_clocks, + .num_clks = ARRAY_SIZE(meson_g12a_clocks), + .phy_names = meson_a1_phy_names, + .num_phys = ARRAY_SIZE(meson_a1_phy_names), + .setup_regmaps = dwc3_meson_gxl_setup_regmaps, + .usb2_init_phy = dwc3_meson_gxl_usb2_init_phy, + .set_phy_mode = dwc3_meson_gxl_set_phy_mode, + .usb_init = dwc3_meson_gxl_usb_init, + .usb_post_init = dwc3_meson_gxl_usb_post_init, +}; + +static struct dwc3_meson_g12a_drvdata gxm_drvdata = { + .otg_switch_supported = true, + .otg_phy_host_port_disable = true, + .clks = meson_gxl_clocks, + .num_clks = ARRAY_SIZE(meson_g12a_clocks), + .phy_names = meson_gxm_phy_names, + .num_phys = ARRAY_SIZE(meson_gxm_phy_names), + .setup_regmaps = dwc3_meson_gxl_setup_regmaps, + .usb2_init_phy = dwc3_meson_gxl_usb2_init_phy, + .set_phy_mode = dwc3_meson_gxl_set_phy_mode, + .usb_init = dwc3_meson_gxl_usb_init, + .usb_post_init = dwc3_meson_gxl_usb_post_init, }; static struct dwc3_meson_g12a_drvdata g12a_drvdata = { .otg_switch_supported = true, .clks = meson_g12a_clocks, .num_clks = ARRAY_SIZE(meson_g12a_clocks), + .phy_names = meson_g12a_phy_names, + .num_phys = ARRAY_SIZE(meson_g12a_phy_names), + .setup_regmaps = dwc3_meson_g12a_setup_regmaps, + .usb2_init_phy = dwc3_meson_g12a_usb2_init_phy, + .set_phy_mode = dwc3_meson_g12a_set_phy_mode, + .usb_init = dwc3_meson_g12a_usb_init, }; static struct dwc3_meson_g12a_drvdata a1_drvdata = { .otg_switch_supported = false, .clks = meson_a1_clocks, .num_clks = ARRAY_SIZE(meson_a1_clocks), + .phy_names = meson_a1_phy_names, + .num_phys = ARRAY_SIZE(meson_a1_phy_names), + .setup_regmaps = dwc3_meson_g12a_setup_regmaps, + .usb2_init_phy = dwc3_meson_g12a_usb2_init_phy, + .set_phy_mode = dwc3_meson_g12a_set_phy_mode, + .usb_init = dwc3_meson_g12a_usb_init, }; struct dwc3_meson_g12a { struct device *dev; - struct regmap *regmap; + struct regmap *u2p_regmap[PHY_COUNT]; + struct regmap *usb_glue_regmap; struct reset_control *reset; struct phy *phys[PHY_COUNT]; enum usb_dr_mode otg_mode; @@ -150,49 +255,78 @@ struct dwc3_meson_g12a { const struct dwc3_meson_g12a_drvdata *drvdata; }; -static void dwc3_meson_g12a_usb2_set_mode(struct dwc3_meson_g12a *priv, - int i, enum phy_mode mode) +static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv, + int i, enum phy_mode mode) +{ + return phy_set_mode(priv->phys[i], mode); +} + +static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode) +{ + /* On GXL PHY must be started in device mode for DWC2 init */ + return priv->drvdata->set_phy_mode(priv, i, + (i == USB2_OTG_PHY) ? PHY_MODE_USB_DEVICE + : PHY_MODE_USB_HOST); +} + +static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv, + int i, enum phy_mode mode) { if (mode == PHY_MODE_USB_HOST) - regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i), + regmap_update_bits(priv->u2p_regmap[i], U2P_R0, U2P_R0_HOST_DEVICE, U2P_R0_HOST_DEVICE); else - regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i), + regmap_update_bits(priv->u2p_regmap[i], U2P_R0, U2P_R0_HOST_DEVICE, 0); + + return 0; } -static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv) +static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i, + enum phy_mode mode) { - int i; + int ret; - if (priv->otg_mode == USB_DR_MODE_PERIPHERAL) - priv->otg_phy_mode = PHY_MODE_USB_DEVICE; - else - priv->otg_phy_mode = PHY_MODE_USB_HOST; + regmap_update_bits(priv->u2p_regmap[i], U2P_R0, + U2P_R0_POWER_ON_RESET, + U2P_R0_POWER_ON_RESET); - for (i = 0 ; i < USB3_HOST_PHY ; ++i) { - if (!priv->phys[i]) - continue; + if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) { + regmap_update_bits(priv->u2p_regmap[i], U2P_R0, + U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS, + U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS); + + ret = priv->drvdata->set_phy_mode(priv, i, mode); + } else + ret = priv->drvdata->set_phy_mode(priv, i, + PHY_MODE_USB_HOST); - regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i), - U2P_R0_POWER_ON_RESET, - U2P_R0_POWER_ON_RESET); + if (ret) + return ret; - if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) { - regmap_update_bits(priv->regmap, - U2P_R0 + (U2P_REG_SIZE * i), - U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS, - U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS); + regmap_update_bits(priv->u2p_regmap[i], U2P_R0, + U2P_R0_POWER_ON_RESET, 0); - dwc3_meson_g12a_usb2_set_mode(priv, i, - priv->otg_phy_mode); - } else - dwc3_meson_g12a_usb2_set_mode(priv, i, - PHY_MODE_USB_HOST); + return 0; +} - regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i), - U2P_R0_POWER_ON_RESET, 0); +static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv, + enum phy_mode mode) +{ + int i, ret; + + for (i = 0; i < priv->drvdata->num_phys; ++i) { + if (!priv->phys[i]) + continue; + + if (!strstr(priv->drvdata->phy_names[i], "usb2")) + continue; + + ret = priv->drvdata->usb2_init_phy(priv, i, mode); + if (ret) + return ret; } return 0; @@ -200,7 +334,7 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv) static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv) { - regmap_update_bits(priv->regmap, USB_R3, + regmap_update_bits(priv->usb_glue_regmap, USB_R3, USB_R3_P30_SSC_RANGE_MASK | USB_R3_P30_REF_SSP_EN, USB_R3_P30_SSC_ENABLE | @@ -208,61 +342,77 @@ static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv) USB_R3_P30_REF_SSP_EN); udelay(2); - regmap_update_bits(priv->regmap, USB_R2, + regmap_update_bits(priv->usb_glue_regmap, USB_R2, USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, 0x15)); - regmap_update_bits(priv->regmap, USB_R2, + regmap_update_bits(priv->usb_glue_regmap, USB_R2, USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, 0x20)); udelay(2); - regmap_update_bits(priv->regmap, USB_R1, + regmap_update_bits(priv->usb_glue_regmap, USB_R1, USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT, USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT); - regmap_update_bits(priv->regmap, USB_R1, + regmap_update_bits(priv->usb_glue_regmap, USB_R1, USB_R1_P30_PCS_TX_SWING_FULL_MASK, FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127)); } -static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv) +static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv, + enum phy_mode mode) { - if (priv->otg_phy_mode == PHY_MODE_USB_DEVICE) { - regmap_update_bits(priv->regmap, USB_R0, + if (mode == PHY_MODE_USB_DEVICE) { + if (priv->otg_mode != USB_DR_MODE_OTG && + priv->drvdata->otg_phy_host_port_disable) + /* Isolate the OTG PHY port from the Host Controller */ + regmap_update_bits(priv->usb_glue_regmap, USB_R1, + USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, + FIELD_PREP(USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, + BIT(USB2_OTG_PHY))); + + regmap_update_bits(priv->usb_glue_regmap, USB_R0, USB_R0_U2D_ACT, USB_R0_U2D_ACT); - regmap_update_bits(priv->regmap, USB_R0, + regmap_update_bits(priv->usb_glue_regmap, USB_R0, USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0); - regmap_update_bits(priv->regmap, USB_R4, + regmap_update_bits(priv->usb_glue_regmap, USB_R4, USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0); } else { - regmap_update_bits(priv->regmap, USB_R0, + if (priv->otg_mode != USB_DR_MODE_OTG && + priv->drvdata->otg_phy_host_port_disable) { + regmap_update_bits(priv->usb_glue_regmap, USB_R1, + USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, 0); + msleep(500); + } + regmap_update_bits(priv->usb_glue_regmap, USB_R0, USB_R0_U2D_ACT, 0); - regmap_update_bits(priv->regmap, USB_R4, + regmap_update_bits(priv->usb_glue_regmap, USB_R4, USB_R4_P21_SLEEP_M0, 0); } } -static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv) +static int dwc3_meson_g12a_usb_init_glue(struct dwc3_meson_g12a *priv, + enum phy_mode mode) { int ret; - ret = dwc3_meson_g12a_usb2_init(priv); + ret = dwc3_meson_g12a_usb2_init(priv, mode); if (ret) return ret; - regmap_update_bits(priv->regmap, USB_R1, + regmap_update_bits(priv->usb_glue_regmap, USB_R1, USB_R1_U3H_FLADJ_30MHZ_REG_MASK, FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20)); - regmap_update_bits(priv->regmap, USB_R5, + regmap_update_bits(priv->usb_glue_regmap, USB_R5, USB_R5_ID_DIG_EN_0, USB_R5_ID_DIG_EN_0); - regmap_update_bits(priv->regmap, USB_R5, + regmap_update_bits(priv->usb_glue_regmap, USB_R5, USB_R5_ID_DIG_EN_1, USB_R5_ID_DIG_EN_1); - regmap_update_bits(priv->regmap, USB_R5, + regmap_update_bits(priv->usb_glue_regmap, USB_R5, USB_R5_ID_DIG_TH_MASK, FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff)); @@ -270,12 +420,13 @@ static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv) if (priv->usb3_ports) dwc3_meson_g12a_usb3_init(priv); - dwc3_meson_g12a_usb_otg_apply_mode(priv); + dwc3_meson_g12a_usb_otg_apply_mode(priv, mode); return 0; } -static const struct regmap_config phy_meson_g12a_usb3_regmap_conf = { +static const struct regmap_config phy_meson_g12a_usb_glue_regmap_conf = { + .name = "usb-glue", .reg_bits = 8, .val_bits = 32, .reg_stride = 4, @@ -284,17 +435,19 @@ static const struct regmap_config phy_meson_g12a_usb3_regmap_conf = { static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv) { + const char *phy_name; int i; - for (i = 0 ; i < PHY_COUNT ; ++i) { - priv->phys[i] = devm_phy_optional_get(priv->dev, phy_names[i]); + for (i = 0 ; i < priv->drvdata->num_phys ; ++i) { + phy_name = priv->drvdata->phy_names[i]; + priv->phys[i] = devm_phy_optional_get(priv->dev, phy_name); if (!priv->phys[i]) continue; if (IS_ERR(priv->phys[i])) return PTR_ERR(priv->phys[i]); - if (i == USB3_HOST_PHY) + if (strstr(phy_name, "usb3")) priv->usb3_ports++; else priv->usb2_ports++; @@ -310,7 +463,7 @@ static enum phy_mode dwc3_meson_g12a_get_id(struct dwc3_meson_g12a *priv) { u32 reg; - regmap_read(priv->regmap, USB_R5, ®); + regmap_read(priv->usb_glue_regmap, USB_R5, ®); if (reg & (USB_R5_ID_DIG_SYNC | USB_R5_ID_DIG_REG)) return PHY_MODE_USB_DEVICE; @@ -342,9 +495,11 @@ static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv, priv->otg_phy_mode = mode; - dwc3_meson_g12a_usb2_set_mode(priv, USB2_OTG_PHY, mode); + ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY, mode); + if (ret) + return ret; - dwc3_meson_g12a_usb_otg_apply_mode(priv); + dwc3_meson_g12a_usb_otg_apply_mode(priv, mode); return 0; } @@ -364,6 +519,13 @@ static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw, if (mode == priv->otg_phy_mode) return 0; + if (priv->drvdata->otg_phy_host_port_disable) + dev_warn_once(priv->dev, "Manual OTG switch is broken on this "\ + "SoC, when manual switching from "\ + "Host to device, DWC3 controller "\ + "will need to be resetted in order "\ + "to recover usage of the Host port"); + return dwc3_meson_g12a_otg_mode_set(priv, mode); } @@ -386,7 +548,8 @@ static irqreturn_t dwc3_meson_g12a_irq_thread(int irq, void *data) dev_warn(priv->dev, "Failed to switch OTG mode\n"); } - regmap_update_bits(priv->regmap, USB_R5, USB_R5_ID_DIG_IRQ, 0); + regmap_update_bits(priv->usb_glue_regmap, USB_R5, + USB_R5_ID_DIG_IRQ, 0); return IRQ_HANDLED; } @@ -421,7 +584,7 @@ static int dwc3_meson_g12a_otg_init(struct platform_device *pdev, if (priv->otg_mode == USB_DR_MODE_OTG) { /* Ack irq before registering */ - regmap_update_bits(priv->regmap, USB_R5, + regmap_update_bits(priv->usb_glue_regmap, USB_R5, USB_R5_ID_DIG_IRQ, 0); irq = platform_get_irq(pdev, 0); @@ -457,6 +620,77 @@ static int dwc3_meson_g12a_otg_init(struct platform_device *pdev, return 0; } +static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv, + void __iomem *base) +{ + /* GXL controls the PHY mode in the PHY registers unlike G12A */ + priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base, + &phy_meson_g12a_usb_glue_regmap_conf); + if (IS_ERR(priv->usb_glue_regmap)) + return PTR_ERR(priv->usb_glue_regmap); + + return 0; +} + +static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv, + void __iomem *base) +{ + int i; + + priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, + base + G12A_GLUE_OFFSET, + &phy_meson_g12a_usb_glue_regmap_conf); + if (IS_ERR(priv->usb_glue_regmap)) + return PTR_ERR(priv->usb_glue_regmap); + + /* Create a regmap for each USB2 PHY control register set */ + for (i = 0; i < priv->usb2_ports; i++) { + struct regmap_config u2p_regmap_config = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = U2P_R1, + }; + + u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL, + "u2p-%d", i); + if (!u2p_regmap_config.name) + return -ENOMEM; + + priv->u2p_regmap[i] = devm_regmap_init_mmio(priv->dev, + base + (i * U2P_REG_SIZE), + &u2p_regmap_config); + if (IS_ERR(priv->u2p_regmap[i])) + return PTR_ERR(priv->u2p_regmap[i]); + } + + return 0; +} + +static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv) +{ + return dwc3_meson_g12a_usb_init_glue(priv, priv->otg_phy_mode); +} + +static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv) +{ + return dwc3_meson_g12a_usb_init_glue(priv, PHY_MODE_USB_DEVICE); +} + +static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv) +{ + int ret; + + ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY, + priv->otg_phy_mode); + if (ret) + return ret; + + dwc3_meson_g12a_usb_otg_apply_mode(priv, priv->otg_phy_mode); + + return 0; +} + static int dwc3_meson_g12a_probe(struct platform_device *pdev) { struct dwc3_meson_g12a *priv; @@ -473,10 +707,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - priv->regmap = devm_regmap_init_mmio(dev, base, - &phy_meson_g12a_usb3_regmap_conf); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); + priv->drvdata = of_device_get_match_data(&pdev->dev); + + priv->dev = dev; + ret = priv->drvdata->setup_regmaps(priv, base); + if (ret) + return ret; priv->vbus = devm_regulator_get_optional(dev, "vbus"); if (IS_ERR(priv->vbus)) { @@ -485,8 +721,6 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) priv->vbus = NULL; } - priv->drvdata = of_device_get_match_data(&pdev->dev); - ret = devm_clk_bulk_get(dev, priv->drvdata->num_clks, priv->drvdata->clks); @@ -499,9 +733,8 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) return ret; platform_set_drvdata(pdev, priv); - priv->dev = dev; - priv->reset = devm_reset_control_get(dev, NULL); + priv->reset = devm_reset_control_get_shared(dev, NULL); if (IS_ERR(priv->reset)) { ret = PTR_ERR(priv->reset); dev_err(dev, "failed to get device reset, err=%d\n", ret); @@ -525,7 +758,14 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) /* Get dr_mode */ priv->otg_mode = usb_get_dr_mode(dev); - dwc3_meson_g12a_usb_init(priv); + if (priv->otg_mode == USB_DR_MODE_PERIPHERAL) + priv->otg_phy_mode = PHY_MODE_USB_DEVICE; + else + priv->otg_phy_mode = PHY_MODE_USB_HOST; + + ret = priv->drvdata->usb_init(priv); + if (ret) + goto err_disable_clks; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { @@ -541,6 +781,12 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev) goto err_phys_exit; } + if (priv->drvdata->usb_post_init) { + ret = priv->drvdata->usb_post_init(priv); + if (ret) + goto err_phys_power; + } + ret = of_platform_populate(np, NULL, NULL, dev); if (ret) goto err_phys_power; @@ -642,7 +888,9 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev) reset_control_deassert(priv->reset); - dwc3_meson_g12a_usb_init(priv); + ret = priv->drvdata->usb_init(priv); + if (ret) + return ret; /* Init PHYs */ for (i = 0 ; i < PHY_COUNT ; ++i) { @@ -675,6 +923,14 @@ static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = { static const struct of_device_id dwc3_meson_g12a_match[] = { { + .compatible = "amlogic,meson-gxl-usb-ctrl", + .data = &gxl_drvdata, + }, + { + .compatible = "amlogic,meson-gxm-usb-ctrl", + .data = &gxm_drvdata, + }, + { .compatible = "amlogic,meson-g12a-usb-ctrl", .data = &g12a_drvdata, }, diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index e64754be47b4..8852fbfdead4 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -27,7 +27,6 @@ struct dwc3_of_simple { struct clk_bulk_data *clks; int num_clocks; struct reset_control *resets; - bool pulse_resets; bool need_reset; }; @@ -38,7 +37,6 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; int ret; - bool shared_resets = false; simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL); if (!simple) @@ -54,13 +52,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) if (of_device_is_compatible(np, "rockchip,rk3399-dwc3")) simple->need_reset = true; - if (of_device_is_compatible(np, "amlogic,meson-axg-dwc3") || - of_device_is_compatible(np, "amlogic,meson-gxl-dwc3")) { - shared_resets = true; - simple->pulse_resets = true; - } - - simple->resets = of_reset_control_array_get(np, shared_resets, true, + simple->resets = of_reset_control_array_get(np, false, true, true); if (IS_ERR(simple->resets)) { ret = PTR_ERR(simple->resets); @@ -68,15 +60,9 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) return ret; } - if (simple->pulse_resets) { - ret = reset_control_reset(simple->resets); - if (ret) - goto err_resetc_put; - } else { - ret = reset_control_deassert(simple->resets); - if (ret) - goto err_resetc_put; - } + ret = reset_control_deassert(simple->resets); + if (ret) + goto err_resetc_put; ret = clk_bulk_get_all(simple->dev, &simple->clks); if (ret < 0) @@ -102,8 +88,7 @@ err_clk_put: clk_bulk_put_all(simple->num_clocks, simple->clks); err_resetc_assert: - if (!simple->pulse_resets) - reset_control_assert(simple->resets); + reset_control_assert(simple->resets); err_resetc_put: reset_control_put(simple->resets); @@ -118,8 +103,7 @@ static void __dwc3_of_simple_teardown(struct dwc3_of_simple *simple) clk_bulk_put_all(simple->num_clocks, simple->clks); simple->num_clocks = 0; - if (!simple->pulse_resets) - reset_control_assert(simple->resets); + reset_control_assert(simple->resets); reset_control_put(simple->resets); @@ -191,8 +175,6 @@ static const struct of_device_id of_dwc3_simple_match[] = { { .compatible = "xlnx,zynqmp-dwc3" }, { .compatible = "cavium,octeon-7130-usb-uctl" }, { .compatible = "sprd,sc9860-dwc3" }, - { .compatible = "amlogic,meson-axg-dwc3" }, - { .compatible = "amlogic,meson-gxl-dwc3" }, { .compatible = "allwinner,sun50i-h6-dwc3" }, { /* Sentinel */ } }; diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 585cb3deea7a..80c3ef134e41 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -95,7 +95,7 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) * Wait until device controller is ready. Only applies to 1.94a and * later RTL. */ - if (dwc->revision >= DWC3_REVISION_194A) { + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) { while (--retries) { reg = dwc3_readl(dwc->regs, DWC3_DSTS); if (reg & DWC3_DSTS_DCNRD) @@ -122,7 +122,7 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) * The following code is racy when called from dwc3_gadget_wakeup, * and is not needed, at least on newer versions */ - if (dwc->revision >= DWC3_REVISION_194A) + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) return 0; /* wait for a change in DSTS */ @@ -273,7 +273,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, { const struct usb_endpoint_descriptor *desc = dep->endpoint.desc; struct dwc3 *dwc = dep->dwc; - u32 timeout = 1000; + u32 timeout = 5000; u32 saved_config = 0; u32 reg; @@ -356,6 +356,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, ret = 0; break; case DEPEVT_TRANSFER_NO_RESOURCE: + dev_WARN(dwc->dev, "No resource for %s\n", + dep->name); ret = -EINVAL; break; case DEPEVT_TRANSFER_BUS_EXPIRY: @@ -387,9 +389,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status); - if (ret == 0 && DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { - dep->flags |= DWC3_EP_TRANSFER_STARTED; - dwc3_gadget_ep_get_transfer_index(dep); + if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { + if (ret == 0) + dep->flags |= DWC3_EP_TRANSFER_STARTED; + + if (ret != -ETIMEDOUT) + dwc3_gadget_ep_get_transfer_index(dep); } if (saved_config) { @@ -415,7 +420,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) * IN transfers due to a mishandled error condition. Synopsys * STAR 9000614252. */ - if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) && + if (dep->direction && + !DWC3_VER_IS_PRIOR(DWC3, 260A) && (dwc->gadget.speed >= USB_SPEED_SUPER)) cmd |= DWC3_DEPCMD_CLEARPENDIN; @@ -573,6 +579,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) { params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE + | DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_STREAM_EVENT_EN; dep->stream_capable = true; } @@ -603,6 +610,9 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, ¶ms); } +static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, + bool interrupt); + /** * __dwc3_gadget_ep_enable - initializes a hw endpoint * @dep: endpoint to be initialized @@ -663,7 +673,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) * Issue StartTransfer here with no-op TRB so we can always rely on No * Response Update Transfer command. */ - if ((usb_endpoint_xfer_bulk(desc) && !dep->stream_capable) || + if (usb_endpoint_xfer_bulk(desc) || usb_endpoint_xfer_int(desc)) { struct dwc3_gadget_ep_cmd_params params; struct dwc3_trb *trb; @@ -682,6 +692,29 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) return ret; + + if (dep->stream_capable) { + /* + * For streams, at start, there maybe a race where the + * host primes the endpoint before the function driver + * queues a request to initiate a stream. In that case, + * the controller will not see the prime to generate the + * ERDY and start stream. To workaround this, issue a + * no-op TRB as normal, but end it immediately. As a + * result, when the function driver queues the request, + * the next START_TRANSFER command will cause the + * controller to generate an ERDY to initiate the + * stream. + */ + dwc3_stop_active_transfer(dep, true, true); + + /* + * All stream eps will reinitiate stream on NoStream + * rejection until we can determine that the host can + * prime after the first transfer. + */ + dep->flags |= DWC3_EP_FORCE_RESTART_STREAM; + } } out: @@ -690,8 +723,6 @@ out: return 0; } -static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, - bool interrupt); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; @@ -912,7 +943,8 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep) static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, dma_addr_t dma, unsigned length, unsigned chain, unsigned node, - unsigned stream_id, unsigned short_not_ok, unsigned no_interrupt) + unsigned stream_id, unsigned short_not_ok, + unsigned no_interrupt, unsigned is_last) { struct dwc3 *dwc = dep->dwc; struct usb_gadget *gadget = &dwc->gadget; @@ -1005,6 +1037,8 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, if (chain) trb->ctrl |= DWC3_TRB_CTRL_CHN; + else if (dep->stream_capable && is_last) + trb->ctrl |= DWC3_TRB_CTRL_LST; if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id); @@ -1032,6 +1066,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, unsigned stream_id = req->request.stream_id; unsigned short_not_ok = req->request.short_not_ok; unsigned no_interrupt = req->request.no_interrupt; + unsigned is_last = req->request.is_last; if (req->request.num_sgs > 0) { length = sg_dma_len(req->start_sg); @@ -1052,7 +1087,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, req->num_trbs++; __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node, - stream_id, short_not_ok, no_interrupt); + stream_id, short_not_ok, no_interrupt, is_last); } static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, @@ -1097,7 +1132,8 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep, maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, - req->request.no_interrupt); + req->request.no_interrupt, + req->request.is_last); } else { dwc3_prepare_one_trb(dep, req, chain, i); } @@ -1141,7 +1177,8 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem, false, 1, req->request.stream_id, req->request.short_not_ok, - req->request.no_interrupt); + req->request.no_interrupt, + req->request.is_last); } else if (req->request.zero && req->request.length && (IS_ALIGNED(req->request.length, maxp))) { struct dwc3 *dwc = dep->dwc; @@ -1158,7 +1195,8 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep, __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0, false, 1, req->request.stream_id, req->request.short_not_ok, - req->request.no_interrupt); + req->request.no_interrupt, + req->request.is_last); } else { dwc3_prepare_one_trb(dep, req, false, 0); } @@ -1194,6 +1232,14 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) if (!dwc3_calc_trbs_left(dep)) return; + + /* + * Don't prepare beyond a transfer. In DWC_usb32, its transfer + * burst capability may try to read and use TRBs beyond the + * active transfer instead of stopping. + */ + if (dep->stream_capable && req->request.is_last) + return; } list_for_each_entry_safe(req, n, &dep->pending_list, list) { @@ -1217,9 +1263,19 @@ static void dwc3_prepare_trbs(struct dwc3_ep *dep) if (!dwc3_calc_trbs_left(dep)) return; + + /* + * Don't prepare beyond a transfer. In DWC_usb32, its transfer + * burst capability may try to read and use TRBs beyond the + * active transfer instead of stopping. + */ + if (dep->stream_capable && req->request.is_last) + return; } } +static void dwc3_gadget_ep_cleanup_cancelled_requests(struct dwc3_ep *dep); + static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; @@ -1259,17 +1315,26 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep) ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); if (ret < 0) { - /* - * FIXME we need to iterate over the list of requests - * here and stop, unmap, free and del each of the linked - * requests instead of what we do now. - */ - if (req->trb) - memset(req->trb, 0, sizeof(struct dwc3_trb)); - dwc3_gadget_del_and_unmap_request(dep, req, ret); + struct dwc3_request *tmp; + + if (ret == -EAGAIN) + return ret; + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + /* If ep isn't started, then there's no end transfer pending */ + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + return ret; } + if (dep->stream_capable && req->request.is_last) + dep->flags |= DWC3_EP_WAIT_TRANSFER_COMPLETE; + return 0; } @@ -1402,17 +1467,15 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) int ret; int i; - if (list_empty(&dep->pending_list)) { + if (list_empty(&dep->pending_list) && + list_empty(&dep->started_list)) { dep->flags |= DWC3_EP_PENDING_REQUEST; return -EAGAIN; } - if (!dwc->dis_start_transfer_quirk && dwc3_is_usb31(dwc) && - (dwc->revision <= DWC3_USB31_REVISION_160A || - (dwc->revision == DWC3_USB31_REVISION_170A && - dwc->version_type >= DWC31_VERSIONTYPE_EA01 && - dwc->version_type <= DWC31_VERSIONTYPE_EA06))) { - + if (!dwc->dis_start_transfer_quirk && + (DWC3_VER_IS_PRIOR(DWC31, 170A) || + DWC3_VER_TYPE_IS_WITHIN(DWC31, 170A, EA01, EA06))) { if (dwc->gadget.speed <= USB_SPEED_HIGH && dep->direction) return dwc3_gadget_start_isoc_quirk(dep); } @@ -1425,6 +1488,27 @@ static int __dwc3_gadget_start_isoc(struct dwc3_ep *dep) break; } + /* + * After a number of unsuccessful start attempts due to bus-expiry + * status, issue END_TRANSFER command and retry on the next XferNotReady + * event. + */ + if (ret == -EAGAIN) { + struct dwc3_gadget_ep_cmd_params params; + u32 cmd; + + cmd = DWC3_DEPCMD_ENDTRANSFER | + DWC3_DEPCMD_CMDIOC | + DWC3_DEPCMD_PARAM(dep->resource_index); + + dep->resource_index = 0; + memset(¶ms, 0, sizeof(params)); + + ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + if (!ret) + dep->flags |= DWC3_EP_END_TRANSFER_PENDING; + } + return ret; } @@ -1457,6 +1541,9 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) list_add_tail(&req->list, &dep->pending_list); req->status = DWC3_REQUEST_STATUS_QUEUED; + if (dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE) + return 0; + /* Start the transfer only after the END_TRANSFER is completed */ if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) { dep->flags |= DWC3_EP_DELAY_START; @@ -1508,6 +1595,10 @@ static void dwc3_gadget_ep_skip_trbs(struct dwc3_ep *dep, struct dwc3_request *r { int i; + /* If req->trb is not set, then the request has not started */ + if (!req->trb) + return; + /* * If request was already started, this means we had to * stop the transfer. With that we also need to ignore @@ -1556,39 +1647,40 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, spin_lock_irqsave(&dwc->lock, flags); - list_for_each_entry(r, &dep->pending_list, list) { + list_for_each_entry(r, &dep->cancelled_list, list) { if (r == req) - break; + goto out; } - if (r != req) { - list_for_each_entry(r, &dep->started_list, list) { - if (r == req) - break; + list_for_each_entry(r, &dep->pending_list, list) { + if (r == req) { + dwc3_gadget_giveback(dep, req, -ECONNRESET); + goto out; } + } + + list_for_each_entry(r, &dep->started_list, list) { if (r == req) { + struct dwc3_request *t; + /* wait until it is processed */ dwc3_stop_active_transfer(dep, true, true); - if (!r->trb) - goto out0; + /* + * Remove any started request if the transfer is + * cancelled. + */ + list_for_each_entry_safe(r, t, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(r); - dwc3_gadget_move_cancelled_request(req); - if (dep->flags & DWC3_EP_TRANSFER_STARTED) - goto out0; - else - goto out1; + goto out; } - dev_err(dwc->dev, "request %pK was not queued to %s\n", - request, ep->name); - ret = -EINVAL; - goto out0; } -out1: - dwc3_gadget_giveback(dep, req, -ECONNRESET); - -out0: + dev_err(dwc->dev, "request %pK was not queued to %s\n", + request, ep->name); + ret = -EINVAL; +out: spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1598,6 +1690,8 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) { struct dwc3_gadget_ep_cmd_params params; struct dwc3 *dwc = dep->dwc; + struct dwc3_request *req; + struct dwc3_request *tmp; int ret; if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { @@ -1634,13 +1728,37 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { + /* + * Don't issue CLEAR_STALL command to control endpoints. The + * controller automatically clears the STALL when it receives + * the SETUP token. + */ + if (dep->number <= 1) { + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + return 0; + } ret = dwc3_send_clear_stall_ep_cmd(dep); - if (ret) + if (ret) { dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); - else - dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + return ret; + } + + dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); + + dwc3_stop_active_transfer(dep, true, true); + + list_for_each_entry_safe(req, tmp, &dep->started_list, list) + dwc3_gadget_move_cancelled_request(req); + + list_for_each_entry_safe(req, tmp, &dep->pending_list, list) + dwc3_gadget_move_cancelled_request(req); + + if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING)) { + dep->flags &= ~DWC3_EP_DELAY_START; + dwc3_gadget_ep_cleanup_cancelled_requests(dep); + } } return ret; @@ -1756,7 +1874,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) } /* Recent versions do this automatically */ - if (dwc->revision < DWC3_REVISION_194A) { + if (DWC3_VER_IS_PRIOR(DWC3, 194A)) { /* write zeroes to Link Change Request */ reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK; @@ -1818,12 +1936,12 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) reg = dwc3_readl(dwc->regs, DWC3_DCTL); if (is_on) { - if (dwc->revision <= DWC3_REVISION_187A) { + if (DWC3_VER_IS_WITHIN(DWC3, ANY, 187A)) { reg &= ~DWC3_DCTL_TRGTULST_MASK; reg |= DWC3_DCTL_TRGTULST_RX_DET; } - if (dwc->revision >= DWC3_REVISION_194A) + if (!DWC3_VER_IS_PRIOR(DWC3, 194A)) reg &= ~DWC3_DCTL_KEEP_CONNECT; reg |= DWC3_DCTL_RUN_STOP; @@ -1897,7 +2015,7 @@ static void dwc3_gadget_enable_irq(struct dwc3 *dwc) DWC3_DEVTEN_USBRSTEN | DWC3_DEVTEN_DISCONNEVTEN); - if (dwc->revision < DWC3_REVISION_250A) + if (DWC3_VER_IS_PRIOR(DWC3, 250A)) reg |= DWC3_DEVTEN_ULSTCNGEN; dwc3_writel(dwc->regs, DWC3_DEVTEN, reg); @@ -1942,6 +2060,8 @@ static void dwc3_gadget_setup_nump(struct dwc3 *dwc) ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7); mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0); + if (DWC3_IP_IS(DWC32)) + mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6); nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024; nump = min_t(u32, nump, 16); @@ -1978,10 +2098,10 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) * bursts of data without going through any sort of endpoint throttling. */ reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG); - if (dwc3_is_usb31(dwc)) - reg &= ~DWC31_GRXTHRCFG_PKTCNTSEL; - else + if (DWC3_IP_IS(DWC3)) reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL; + else + reg &= ~DWC31_GRXTHRCFG_PKTCNTSEL; dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg); @@ -2154,7 +2274,7 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g, * STAR#9000525659: Clock Domain Crossing on DCTL in * USB 2.0 Mode */ - if (dwc->revision < DWC3_REVISION_220A && + if (DWC3_VER_IS_PRIOR(DWC3, 220A) && !dwc->dis_metastability_quirk) { reg |= DWC3_DCFG_SUPERSPEED; } else { @@ -2172,18 +2292,18 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g, reg |= DWC3_DCFG_SUPERSPEED; break; case USB_SPEED_SUPER_PLUS: - if (dwc3_is_usb31(dwc)) - reg |= DWC3_DCFG_SUPERSPEED_PLUS; - else + if (DWC3_IP_IS(DWC3)) reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; break; default: dev_err(dwc->dev, "invalid speed (%d)\n", speed); - if (dwc->revision & DWC3_REVISION_IS_DWC31) - reg |= DWC3_DCFG_SUPERSPEED_PLUS; - else + if (DWC3_IP_IS(DWC3)) reg |= DWC3_DCFG_SUPERSPEED; + else + reg |= DWC3_DCFG_SUPERSPEED_PLUS; } } dwc3_writel(dwc->regs, DWC3_DCFG, reg); @@ -2226,14 +2346,17 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep) int size; mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + if (DWC3_IP_IS(DWC32)) + mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6); + /* MDWIDTH is represented in bits, we need it in bytes */ mdwidth /= 8; size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1)); - if (dwc3_is_usb31(dwc)) - size = DWC31_GTXFIFOSIZ_TXFDEP(size); - else + if (DWC3_IP_IS(DWC3)) size = DWC3_GTXFIFOSIZ_TXFDEP(size); + else + size = DWC31_GTXFIFOSIZ_TXFDEP(size); /* FIFO Depth is in MDWDITH bytes. Multiply */ size *= mdwidth; @@ -2270,16 +2393,18 @@ static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep) int size; mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0); + if (DWC3_IP_IS(DWC32)) + mdwidth += DWC3_GHWPARAMS6_MDWIDTH(dwc->hwparams.hwparams6); /* MDWIDTH is represented in bits, convert to bytes */ mdwidth /= 8; /* All OUT endpoints share a single RxFIFO space */ size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0)); - if (dwc3_is_usb31(dwc)) - size = DWC31_GRXFIFOSIZ_RXFDEP(size); - else + if (DWC3_IP_IS(DWC3)) size = DWC3_GRXFIFOSIZ_RXFDEP(size); + else + size = DWC31_GRXFIFOSIZ_RXFDEP(size); /* FIFO depth is in MDWDITH bytes */ size *= mdwidth; @@ -2531,10 +2656,8 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep, req->request.actual = req->request.length - req->remaining; - if (!dwc3_gadget_ep_request_completed(req)) { - __dwc3_gadget_kick_transfer(dep); + if (!dwc3_gadget_ep_request_completed(req)) goto out; - } dwc3_gadget_giveback(dep, req, status); @@ -2558,41 +2681,53 @@ static void dwc3_gadget_ep_cleanup_completed_requests(struct dwc3_ep *dep, } } +static bool dwc3_gadget_ep_should_continue(struct dwc3_ep *dep) +{ + struct dwc3_request *req; + + if (!list_empty(&dep->pending_list)) + return true; + + /* + * We only need to check the first entry of the started list. We can + * assume the completed requests are removed from the started list. + */ + req = next_request(&dep->started_list); + if (!req) + return false; + + return !dwc3_gadget_ep_request_completed(req); +} + static void dwc3_gadget_endpoint_frame_from_event(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { dep->frame_number = event->parameters; } -static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, - const struct dwc3_event_depevt *event) +static bool dwc3_gadget_endpoint_trbs_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event, int status) { struct dwc3 *dwc = dep->dwc; - unsigned status = 0; - bool stop = false; - - dwc3_gadget_endpoint_frame_from_event(dep, event); - - if (event->status & DEPEVT_STATUS_BUSERR) - status = -ECONNRESET; - - if (event->status & DEPEVT_STATUS_MISSED_ISOC) { - status = -EXDEV; - - if (list_empty(&dep->started_list)) - stop = true; - } + bool no_started_trb = true; dwc3_gadget_ep_cleanup_completed_requests(dep, event, status); - if (stop) + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) + goto out; + + if (status == -EXDEV && list_empty(&dep->started_list)) dwc3_stop_active_transfer(dep, true, true); + else if (dwc3_gadget_ep_should_continue(dep)) + if (__dwc3_gadget_kick_transfer(dep) == 0) + no_started_trb = false; +out: /* * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround. * See dwc3_gadget_linksts_change_interrupt() for 1st half. */ - if (dwc->revision < DWC3_REVISION_183A) { + if (DWC3_VER_IS_PRIOR(DWC3, 183A)) { u32 reg; int i; @@ -2603,7 +2738,7 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, continue; if (!list_empty(&dep->started_list)) - return; + return no_started_trb; } reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -2612,15 +2747,124 @@ static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, dwc->u1u2 = 0; } + + return no_started_trb; +} + +static void dwc3_gadget_endpoint_transfer_in_progress(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + int status = 0; + + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) + dwc3_gadget_endpoint_frame_from_event(dep, event); + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + if (event->status & DEPEVT_STATUS_MISSED_ISOC) + status = -EXDEV; + + dwc3_gadget_endpoint_trbs_complete(dep, event, status); +} + +static void dwc3_gadget_endpoint_transfer_complete(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + int status = 0; + + dep->flags &= ~DWC3_EP_TRANSFER_STARTED; + + if (event->status & DEPEVT_STATUS_BUSERR) + status = -ECONNRESET; + + if (dwc3_gadget_endpoint_trbs_complete(dep, event, status)) + dep->flags &= ~DWC3_EP_WAIT_TRANSFER_COMPLETE; } static void dwc3_gadget_endpoint_transfer_not_ready(struct dwc3_ep *dep, const struct dwc3_event_depevt *event) { dwc3_gadget_endpoint_frame_from_event(dep, event); + + /* + * The XferNotReady event is generated only once before the endpoint + * starts. It will be generated again when END_TRANSFER command is + * issued. For some controller versions, the XferNotReady event may be + * generated while the END_TRANSFER command is still in process. Ignore + * it and wait for the next XferNotReady event after the command is + * completed. + */ + if (dep->flags & DWC3_EP_END_TRANSFER_PENDING) + return; + (void) __dwc3_gadget_start_isoc(dep); } +static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, + const struct dwc3_event_depevt *event) +{ + struct dwc3 *dwc = dep->dwc; + + if (event->status == DEPEVT_STREAMEVT_FOUND) { + dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; + goto out; + } + + /* Note: NoStream rejection event param value is 0 and not 0xFFFF */ + switch (event->parameters) { + case DEPEVT_STREAM_PRIME: + /* + * If the host can properly transition the endpoint state from + * idle to prime after a NoStream rejection, there's no need to + * force restarting the endpoint to reinitiate the stream. To + * simplify the check, assume the host follows the USB spec if + * it primed the endpoint more than once. + */ + if (dep->flags & DWC3_EP_FORCE_RESTART_STREAM) { + if (dep->flags & DWC3_EP_FIRST_STREAM_PRIMED) + dep->flags &= ~DWC3_EP_FORCE_RESTART_STREAM; + else + dep->flags |= DWC3_EP_FIRST_STREAM_PRIMED; + } + + break; + case DEPEVT_STREAM_NOSTREAM: + if ((dep->flags & DWC3_EP_IGNORE_NEXT_NOSTREAM) || + !(dep->flags & DWC3_EP_FORCE_RESTART_STREAM) || + !(dep->flags & DWC3_EP_WAIT_TRANSFER_COMPLETE)) + break; + + /* + * If the host rejects a stream due to no active stream, by the + * USB and xHCI spec, the endpoint will be put back to idle + * state. When the host is ready (buffer added/updated), it will + * prime the endpoint to inform the usb device controller. This + * triggers the device controller to issue ERDY to restart the + * stream. However, some hosts don't follow this and keep the + * endpoint in the idle state. No prime will come despite host + * streams are updated, and the device controller will not be + * triggered to generate ERDY to move the next stream data. To + * workaround this and maintain compatibility with various + * hosts, force to reinitate the stream until the host is ready + * instead of waiting for the host to prime the endpoint. + */ + if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { + unsigned int cmd = DWC3_DGCMD_SET_ENDPOINT_PRIME; + + dwc3_send_gadget_generic_command(dwc, cmd, dep->number); + } else { + dep->flags |= DWC3_EP_DELAY_START; + dwc3_stop_active_transfer(dep, true, true); + return; + } + break; + } + +out: + dep->flags &= ~DWC3_EP_IGNORE_NEXT_NOSTREAM; +} + static void dwc3_endpoint_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event) { @@ -2665,8 +2909,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep->flags &= ~DWC3_EP_DELAY_START; } break; - case DWC3_DEPEVT_STREAMEVT: case DWC3_DEPEVT_XFERCOMPLETE: + dwc3_gadget_endpoint_transfer_complete(dep, event); + break; + case DWC3_DEPEVT_STREAMEVT: + dwc3_gadget_endpoint_stream_event(dep, event); + break; case DWC3_DEPEVT_RXTXFIFOEVT: break; } @@ -2758,6 +3006,14 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, WARN_ON_ONCE(ret); dep->resource_index = 0; + /* + * The END_TRANSFER command will cause the controller to generate a + * NoStream Event, and it's not due to the host DP NoStream rejection. + * Ignore the next NoStream event. + */ + if (dep->stream_capable) + dep->flags |= DWC3_EP_IGNORE_NEXT_NOSTREAM; + if (!interrupt) dep->flags &= ~DWC3_EP_TRANSFER_STARTED; else @@ -2838,7 +3094,7 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) * STAR#9000466709: RTL: Device : Disconnect event not * generated if setup packet pending in FIFO */ - if (dwc->revision < DWC3_REVISION_188A) { + if (DWC3_VER_IS_PRIOR(DWC3, 188A)) { if (dwc->setup_packet_pending) dwc3_gadget_disconnect_interrupt(dwc); } @@ -2897,7 +3153,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) * STAR#9000483510: RTL: SS : USB3 reset event may * not be generated always when the link enters poll */ - if (dwc->revision < DWC3_REVISION_190A) + if (DWC3_VER_IS_PRIOR(DWC3, 190A)) dwc3_gadget_reset_interrupt(dwc); dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); @@ -2925,7 +3181,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) /* Enable USB2 LPM Capability */ - if ((dwc->revision > DWC3_REVISION_194A) && + if (!DWC3_VER_IS_WITHIN(DWC3, ANY, 194A) && (speed != DWC3_DSTS_SUPERSPEED) && (speed != DWC3_DSTS_SUPERSPEED_PLUS)) { reg = dwc3_readl(dwc->regs, DWC3_DCFG); @@ -2944,11 +3200,10 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) * BESL value in the LPM token is less than or equal to LPM * NYET threshold. */ - WARN_ONCE(dwc->revision < DWC3_REVISION_240A - && dwc->has_lpm_erratum, + WARN_ONCE(DWC3_VER_IS_PRIOR(DWC3, 240A) && dwc->has_lpm_erratum, "LPM Erratum not available on dwc3 revisions < 2.40a\n"); - if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A) + if (dwc->has_lpm_erratum && !DWC3_VER_IS_PRIOR(DWC3, 240A)) reg |= DWC3_DCTL_NYET_THRES(dwc->lpm_nyet_threshold); dwc3_gadget_dctl_write_safe(dwc, reg); @@ -3019,7 +3274,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, * operational mode */ pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1); - if ((dwc->revision < DWC3_REVISION_250A) && + if (DWC3_VER_IS_PRIOR(DWC3, 250A) && (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) { if ((dwc->link_state == DWC3_LINK_STATE_U3) && (next == DWC3_LINK_STATE_RESUME)) { @@ -3045,7 +3300,7 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us * core send LGO_Ux entering U0 */ - if (dwc->revision < DWC3_REVISION_183A) { + if (DWC3_VER_IS_PRIOR(DWC3, 183A)) { if (next == DWC3_LINK_STATE_U0) { u32 u1u2; u32 reg; @@ -3156,7 +3411,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc, break; case DWC3_DEVICE_EVENT_EOPF: /* It changed to be suspend event for version 2.30a and above */ - if (dwc->revision >= DWC3_REVISION_230A) { + if (!DWC3_VER_IS_PRIOR(DWC3, 230A)) { /* * Ignore suspend event until the gadget enters into * USB_STATE_CONFIGURED state. @@ -3401,7 +3656,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) * is less than super speed because we don't have means, yet, to tell * composite.c that we are USB 2.0 + LPM ECN. */ - if (dwc->revision < DWC3_REVISION_220A && + if (DWC3_VER_IS_PRIOR(DWC3, 220A) && !dwc->dis_metastability_quirk) dev_info(dwc->dev, "changing max_speed on rev %08x\n", dwc->revision); diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index fbc7d8013f0b..24dca3872022 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * gadget.h - DesignWare USB3 DRD Gadget Header * diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 86dbd012b984..bef1c1ac2067 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -104,7 +104,7 @@ int dwc3_host_init(struct dwc3 *dwc) * * This following flag tells XHCI to do just that. */ - if (dwc->revision <= DWC3_REVISION_300A) + if (DWC3_VER_IS_WITHIN(DWC3, ANY, 300A)) props[prop_idx++] = PROPERTY_ENTRY_BOOL("quirk-broken-port-ped"); if (prop_idx) { diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h index 70acdf94a0bf..9bbe5d4bf076 100644 --- a/drivers/usb/dwc3/io.h +++ b/drivers/usb/dwc3/io.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /** * io.h - DesignWare USB3 DRD IO Header * diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index 3054b89512ff..4c4fc6c41d9b 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /** * trace.h - DesignWare USB3 DRD Controller Trace Support * diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index cb4950cf1cdc..5c1eb96a5c57 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -96,40 +96,43 @@ function_descriptors(struct usb_function *f, } /** - * next_ep_desc() - advance to the next EP descriptor + * next_desc() - advance to the next desc_type descriptor * @t: currect pointer within descriptor array + * @desc_type: descriptor type * - * Return: next EP descriptor or NULL + * Return: next desc_type descriptor or NULL * - * Iterate over @t until either EP descriptor found or + * Iterate over @t until either desc_type descriptor found or * NULL (that indicates end of list) encountered */ static struct usb_descriptor_header** -next_ep_desc(struct usb_descriptor_header **t) +next_desc(struct usb_descriptor_header **t, u8 desc_type) { for (; *t; t++) { - if ((*t)->bDescriptorType == USB_DT_ENDPOINT) + if ((*t)->bDescriptorType == desc_type) return t; } return NULL; } /* - * for_each_ep_desc()- iterate over endpoint descriptors in the - * descriptors list - * @start: pointer within descriptor array. - * @ep_desc: endpoint descriptor to use as the loop cursor + * for_each_desc() - iterate over desc_type descriptors in the + * descriptors list + * @start: pointer within descriptor array. + * @iter_desc: desc_type descriptor to use as the loop cursor + * @desc_type: wanted descriptr type */ -#define for_each_ep_desc(start, ep_desc) \ - for (ep_desc = next_ep_desc(start); \ - ep_desc; ep_desc = next_ep_desc(ep_desc+1)) +#define for_each_desc(start, iter_desc, desc_type) \ + for (iter_desc = next_desc(start, desc_type); \ + iter_desc; iter_desc = next_desc(iter_desc + 1, desc_type)) /** - * config_ep_by_speed() - configures the given endpoint + * config_ep_by_speed_and_alt() - configures the given endpoint * according to gadget speed. * @g: pointer to the gadget * @f: usb function * @_ep: the endpoint to configure + * @alt: alternate setting number * * Return: error code, 0 on success * @@ -142,11 +145,13 @@ next_ep_desc(struct usb_descriptor_header **t) * Note: the supplied function should hold all the descriptors * for supported speeds */ -int config_ep_by_speed(struct usb_gadget *g, - struct usb_function *f, - struct usb_ep *_ep) +int config_ep_by_speed_and_alt(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep, + u8 alt) { struct usb_endpoint_descriptor *chosen_desc = NULL; + struct usb_interface_descriptor *int_desc = NULL; struct usb_descriptor_header **speed_desc = NULL; struct usb_ss_ep_comp_descriptor *comp_desc = NULL; @@ -182,8 +187,21 @@ int config_ep_by_speed(struct usb_gadget *g, default: speed_desc = f->fs_descriptors; } + + /* find correct alternate setting descriptor */ + for_each_desc(speed_desc, d_spd, USB_DT_INTERFACE) { + int_desc = (struct usb_interface_descriptor *)*d_spd; + + if (int_desc->bAlternateSetting == alt) { + speed_desc = d_spd; + goto intf_found; + } + } + return -EIO; + +intf_found: /* find descriptors */ - for_each_ep_desc(speed_desc, d_spd) { + for_each_desc(speed_desc, d_spd, USB_DT_ENDPOINT) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpointAddress == _ep->address) goto ep_found; @@ -237,6 +255,32 @@ ep_found: } return 0; } +EXPORT_SYMBOL_GPL(config_ep_by_speed_and_alt); + +/** + * config_ep_by_speed() - configures the given endpoint + * according to gadget speed. + * @g: pointer to the gadget + * @f: usb function + * @_ep: the endpoint to configure + * + * Return: error code, 0 on success + * + * This function chooses the right descriptors for a given + * endpoint according to gadget speed and saves it in the + * endpoint desc field. If the endpoint already has a descriptor + * assigned to it - overwrites it with currently corresponding + * descriptor. The endpoint maxpacket field is updated according + * to the chosen descriptor. + * Note: the supplied function should hold all the descriptors + * for supported speeds + */ +int config_ep_by_speed(struct usb_gadget *g, + struct usb_function *f, + struct usb_ep *_ep) +{ + return config_ep_by_speed_and_alt(g, f, _ep, 0); +} EXPORT_SYMBOL_GPL(config_ep_by_speed); /** diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index 6a9aa4413d64..9dc06a4e1b30 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -13,8 +13,6 @@ int check_user_usb_string(const char *name, struct usb_gadget_strings *stringtab_dev) { - unsigned primary_lang; - unsigned sub_lang; u16 num; int ret; @@ -22,17 +20,7 @@ int check_user_usb_string(const char *name, if (ret) return ret; - primary_lang = num & 0x3ff; - sub_lang = num >> 10; - - /* simple sanity check for valid langid */ - switch (primary_lang) { - case 0: - case 0x62 ... 0xfe: - case 0x100 ... 0x3ff: - return -EINVAL; - } - if (!sub_lang) + if (!usb_validate_langid(num)) return -EINVAL; stringtab_dev->language = num; diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c index 7c152c28b26c..200596ea9557 100644 --- a/drivers/usb/gadget/function/f_acm.c +++ b/drivers/usb/gadget/function/f_acm.c @@ -723,6 +723,20 @@ static void acm_free_func(struct usb_function *f) kfree(acm); } +static void acm_resume(struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + + gserial_resume(&acm->port); +} + +static void acm_suspend(struct usb_function *f) +{ + struct f_acm *acm = func_to_acm(f); + + gserial_suspend(&acm->port); +} + static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) { struct f_serial_opts *opts; @@ -750,6 +764,8 @@ static struct usb_function *acm_alloc_func(struct usb_function_instance *fi) acm->port_num = opts->port_num; acm->port.func.unbind = acm_unbind; acm->port.func.free_func = acm_free_func; + acm->port.func.resume = acm_resume; + acm->port.func.suspend = acm_suspend; return &acm->port.func; } diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c index b81a91d504bd..cfcc4e81fb77 100644 --- a/drivers/usb/gadget/function/f_eem.c +++ b/drivers/usb/gadget/function/f_eem.c @@ -291,8 +291,6 @@ static int eem_bind(struct usb_configuration *c, struct usb_function *f) goto fail; eem->port.out_ep = ep; - status = -ENOMEM; - /* support all relevant hardware speeds... we expect that when * hardware is dual speed, all bulk-capable endpoints work at * both speeds diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 10f01f974f67..494f853f2206 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2508,7 +2508,7 @@ static int __ffs_data_got_descs(struct ffs_data *ffs, os_descs_count = get_unaligned_le32(data); data += 4; len -= 4; - }; + } /* Read descriptors */ raw_descs = data; diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c index 1406255d0865..e62713846350 100644 --- a/drivers/usb/gadget/function/f_serial.c +++ b/drivers/usb/gadget/function/f_serial.c @@ -348,6 +348,20 @@ static void gser_unbind(struct usb_configuration *c, struct usb_function *f) usb_free_all_descriptors(f); } +static void gser_resume(struct usb_function *f) +{ + struct f_gser *gser = func_to_gser(f); + + gserial_resume(&gser->port); +} + +static void gser_suspend(struct usb_function *f) +{ + struct f_gser *gser = func_to_gser(f); + + gserial_suspend(&gser->port); +} + static struct usb_function *gser_alloc(struct usb_function_instance *fi) { struct f_gser *gser; @@ -369,6 +383,8 @@ static struct usb_function *gser_alloc(struct usb_function_instance *fi) gser->port.func.set_alt = gser_set_alt; gser->port.func.disable = gser_disable; gser->port.func.free_func = gser_free; + gser->port.func.resume = gser_resume; + gser->port.func.suspend = gser_suspend; return &gser->port.func; } diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 36504931b2d1..2979cbe4d95f 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -531,6 +531,7 @@ static int uasp_prepare_r_request(struct usbg_cmd *cmd) stream->req_in->sg = se_cmd->t_data_sg; } + stream->req_in->is_last = 1; stream->req_in->complete = uasp_status_data_cmpl; stream->req_in->length = se_cmd->data_length; stream->req_in->context = cmd; @@ -554,6 +555,7 @@ static void uasp_prepare_status(struct usbg_cmd *cmd) */ iu->len = cpu_to_be16(se_cmd->scsi_sense_length); iu->status = se_cmd->scsi_status; + stream->req_status->is_last = 1; stream->req_status->context = cmd; stream->req_status->length = se_cmd->scsi_sense_length + 16; stream->req_status->buf = iu; @@ -991,6 +993,7 @@ static int usbg_prepare_w_request(struct usbg_cmd *cmd, struct usb_request *req) req->sg = se_cmd->t_data_sg; } + req->is_last = 1; req->complete = usbg_data_write_cmpl; req->length = se_cmd->data_length; req->context = cmd; diff --git a/drivers/usb/gadget/function/f_uvc.h b/drivers/usb/gadget/function/f_uvc.h index a81a17765558..1db972d4beeb 100644 --- a/drivers/usb/gadget/function/f_uvc.h +++ b/drivers/usb/gadget/function/f_uvc.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * f_uvc.h -- USB Video Class Gadget driver * diff --git a/drivers/usb/gadget/function/rndis.h b/drivers/usb/gadget/function/rndis.h index c7e3a70ce6c1..f6167f7fea82 100644 --- a/drivers/usb/gadget/function/rndis.h +++ b/drivers/usb/gadget/function/rndis.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * RNDIS Definitions for Remote NDIS * diff --git a/drivers/usb/gadget/function/u_audio.h b/drivers/usb/gadget/function/u_audio.h index 81d3d4ed6dfb..5ea6b86f1fda 100644 --- a/drivers/usb/gadget/function/u_audio.h +++ b/drivers/usb/gadget/function/u_audio.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * u_audio.h -- interface to USB gadget "ALSA sound card" utilities * diff --git a/drivers/usb/gadget/function/u_ecm.h b/drivers/usb/gadget/function/u_ecm.h index 098ece573a5e..77cfb89932be 100644 --- a/drivers/usb/gadget/function/u_ecm.h +++ b/drivers/usb/gadget/function/u_ecm.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_ecm.h * diff --git a/drivers/usb/gadget/function/u_eem.h b/drivers/usb/gadget/function/u_eem.h index 921386a375cf..3bd85dfcd71c 100644 --- a/drivers/usb/gadget/function/u_eem.h +++ b/drivers/usb/gadget/function/u_eem.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_eem.h * diff --git a/drivers/usb/gadget/function/u_ether.h b/drivers/usb/gadget/function/u_ether.h index 332307d54292..10dd640684e2 100644 --- a/drivers/usb/gadget/function/u_ether.h +++ b/drivers/usb/gadget/function/u_ether.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * u_ether.h -- interface to USB gadget "ethernet link" utilities * diff --git a/drivers/usb/gadget/function/u_ether_configfs.h b/drivers/usb/gadget/function/u_ether_configfs.h index d8b92485b727..bd92b5703013 100644 --- a/drivers/usb/gadget/function/u_ether_configfs.h +++ b/drivers/usb/gadget/function/u_ether_configfs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_ether_configfs.h * diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h index f9b0cf67360d..f102ec23f3af 100644 --- a/drivers/usb/gadget/function/u_fs.h +++ b/drivers/usb/gadget/function/u_fs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_fs.h * diff --git a/drivers/usb/gadget/function/u_gether.h b/drivers/usb/gadget/function/u_gether.h index ce4f07626f96..2f7a373ed449 100644 --- a/drivers/usb/gadget/function/u_gether.h +++ b/drivers/usb/gadget/function/u_gether.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_gether.h * diff --git a/drivers/usb/gadget/function/u_hid.h b/drivers/usb/gadget/function/u_hid.h index 1594bfa312eb..84e6da302499 100644 --- a/drivers/usb/gadget/function/u_hid.h +++ b/drivers/usb/gadget/function/u_hid.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_hid.h * diff --git a/drivers/usb/gadget/function/u_midi.h b/drivers/usb/gadget/function/u_midi.h index 29bf006c0a13..f6e14af7f566 100644 --- a/drivers/usb/gadget/function/u_midi.h +++ b/drivers/usb/gadget/function/u_midi.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_midi.h * diff --git a/drivers/usb/gadget/function/u_ncm.h b/drivers/usb/gadget/function/u_ncm.h index 70da3201a1d0..5408854d8407 100644 --- a/drivers/usb/gadget/function/u_ncm.h +++ b/drivers/usb/gadget/function/u_ncm.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_ncm.h * diff --git a/drivers/usb/gadget/function/u_phonet.h b/drivers/usb/gadget/function/u_phonet.h index 12fb613f85d1..c53233b37192 100644 --- a/drivers/usb/gadget/function/u_phonet.h +++ b/drivers/usb/gadget/function/u_phonet.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * u_phonet.h - interface to Phonet * diff --git a/drivers/usb/gadget/function/u_printer.h b/drivers/usb/gadget/function/u_printer.h index 78797764f478..318205fb778e 100644 --- a/drivers/usb/gadget/function/u_printer.h +++ b/drivers/usb/gadget/function/u_printer.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_printer.h * diff --git a/drivers/usb/gadget/function/u_rndis.h b/drivers/usb/gadget/function/u_rndis.h index 1e148b76f339..a8c409b2f52f 100644 --- a/drivers/usb/gadget/function/u_rndis.h +++ b/drivers/usb/gadget/function/u_rndis.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_rndis.h * diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 8167d379e115..3cfc6e2eba71 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -120,6 +120,8 @@ struct gs_port { wait_queue_head_t drain_wait; /* wait while writes drain */ bool write_busy; wait_queue_head_t close_wait; + bool suspended; /* port suspended */ + bool start_delayed; /* delay start when suspended */ /* REVISIT this state ... */ struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */ @@ -630,13 +632,19 @@ static int gs_open(struct tty_struct *tty, struct file *file) /* if connected, start the I/O stream */ if (port->port_usb) { - struct gserial *gser = port->port_usb; - - pr_debug("gs_open: start ttyGS%d\n", port->port_num); - gs_start_io(port); - - if (gser->connect) - gser->connect(gser); + /* if port is suspended, wait resume to start I/0 stream */ + if (!port->suspended) { + struct gserial *gser = port->port_usb; + + pr_debug("gs_open: start ttyGS%d\n", port->port_num); + gs_start_io(port); + + if (gser->connect) + gser->connect(gser); + } else { + pr_debug("delay start of ttyGS%d\n", port->port_num); + port->start_delayed = true; + } } pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file); @@ -680,7 +688,7 @@ raced_with_open: pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file); gser = port->port_usb; - if (gser && gser->disconnect) + if (gser && !port->suspended && gser->disconnect) gser->disconnect(gser); /* wait for circular write buffer to drain, disconnect, or at @@ -708,6 +716,7 @@ raced_with_open: else kfifo_reset(&port->port_write_buf); + port->start_delayed = false; port->port.count = 0; port->port.tty = NULL; @@ -1403,6 +1412,38 @@ void gserial_disconnect(struct gserial *gser) } EXPORT_SYMBOL_GPL(gserial_disconnect); +void gserial_suspend(struct gserial *gser) +{ + struct gs_port *port = gser->ioport; + unsigned long flags; + + spin_lock_irqsave(&port->port_lock, flags); + port->suspended = true; + spin_unlock_irqrestore(&port->port_lock, flags); +} +EXPORT_SYMBOL_GPL(gserial_suspend); + +void gserial_resume(struct gserial *gser) +{ + struct gs_port *port = gser->ioport; + unsigned long flags; + + spin_lock_irqsave(&port->port_lock, flags); + port->suspended = false; + if (!port->start_delayed) { + spin_unlock_irqrestore(&port->port_lock, flags); + return; + } + + pr_debug("delayed start ttyGS%d\n", port->port_num); + gs_start_io(port); + if (gser->connect) + gser->connect(gser); + port->start_delayed = false; + spin_unlock_irqrestore(&port->port_lock, flags); +} +EXPORT_SYMBOL_GPL(gserial_resume); + static int userial_init(void) { unsigned i; diff --git a/drivers/usb/gadget/function/u_serial.h b/drivers/usb/gadget/function/u_serial.h index e5b08ab8cf7a..cadb76eecbc7 100644 --- a/drivers/usb/gadget/function/u_serial.h +++ b/drivers/usb/gadget/function/u_serial.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * u_serial.h - interface to USB gadget "serial port"/TTY utilities * @@ -68,6 +68,8 @@ ssize_t gserial_get_console(unsigned char port_num, char *page); /* connect/disconnect is handled by individual functions */ int gserial_connect(struct gserial *, u8 port_num); void gserial_disconnect(struct gserial *); +void gserial_suspend(struct gserial *p); +void gserial_resume(struct gserial *p); /* functions are bound to configurations by a config or gadget driver */ int gser_bind_config(struct usb_configuration *c, u8 port_num); diff --git a/drivers/usb/gadget/function/u_tcm.h b/drivers/usb/gadget/function/u_tcm.h index 3f7ccecb0f9b..2cd15d9a1c0d 100644 --- a/drivers/usb/gadget/function/u_tcm.h +++ b/drivers/usb/gadget/function/u_tcm.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_tcm.h * diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h index 6f1a9d73defe..39c0e29e1b46 100644 --- a/drivers/usb/gadget/function/u_uac1.h +++ b/drivers/usb/gadget/function/u_uac1.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_uac1.h - Utility definitions for UAC1 function * diff --git a/drivers/usb/gadget/function/u_uac1_legacy.h b/drivers/usb/gadget/function/u_uac1_legacy.h index 5c1bdf46fe32..b5df9bcbbeba 100644 --- a/drivers/usb/gadget/function/u_uac1_legacy.h +++ b/drivers/usb/gadget/function/u_uac1_legacy.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * u_uac1.h -- interface to USB gadget "ALSA AUDIO" utilities * diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h index 82048791eb6e..b5035711172d 100644 --- a/drivers/usb/gadget/function/u_uac2.h +++ b/drivers/usb/gadget/function/u_uac2.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_uac2.h * diff --git a/drivers/usb/gadget/function/u_uvc.h b/drivers/usb/gadget/function/u_uvc.h index 16da49a2fcf2..9a01a7d4f17f 100644 --- a/drivers/usb/gadget/function/u_uvc.h +++ b/drivers/usb/gadget/function/u_uvc.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * u_uvc.h * diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h index 1473d25ff17a..23ee25383c1f 100644 --- a/drivers/usb/gadget/function/uvc.h +++ b/drivers/usb/gadget/function/uvc.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0+ +/* SPDX-License-Identifier: GPL-2.0+ */ /* * uvc_gadget.h -- USB Video Class Gadget driver * @@ -77,6 +77,8 @@ struct uvc_video { struct uvc_device *uvc; struct usb_ep *ep; + struct work_struct pump; + /* Frame parameters */ u8 bpp; u32 fcc; diff --git a/drivers/usb/gadget/function/uvc_configfs.h b/drivers/usb/gadget/function/uvc_configfs.h index 341391dbc81f..7e1d7ca29bf2 100644 --- a/drivers/usb/gadget/function/uvc_configfs.h +++ b/drivers/usb/gadget/function/uvc_configfs.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * uvc_configfs.h * diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c index 495f0ec663ea..4ca89eab6159 100644 --- a/drivers/usb/gadget/function/uvc_v4l2.c +++ b/drivers/usb/gadget/function/uvc_v4l2.c @@ -169,7 +169,9 @@ uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) if (ret < 0) return ret; - return uvcg_video_pump(video); + schedule_work(&video->pump); + + return ret; } static int diff --git a/drivers/usb/gadget/function/uvc_v4l2.h b/drivers/usb/gadget/function/uvc_v4l2.h index 452d71059b3f..1576005b61fd 100644 --- a/drivers/usb/gadget/function/uvc_v4l2.h +++ b/drivers/usb/gadget/function/uvc_v4l2.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * uvc_v4l2.h -- USB Video Class Gadget driver * diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index 5c042f380708..633e23d58d86 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -142,44 +142,12 @@ static int uvcg_video_ep_queue(struct uvc_video *video, struct usb_request *req) return ret; } -/* - * I somehow feel that synchronisation won't be easy to achieve here. We have - * three events that control USB requests submission: - * - * - USB request completion: the completion handler will resubmit the request - * if a video buffer is available. - * - * - USB interface setting selection: in response to a SET_INTERFACE request, - * the handler will start streaming if a video buffer is available and if - * video is not currently streaming. - * - * - V4L2 buffer queueing: the driver will start streaming if video is not - * currently streaming. - * - * Race conditions between those 3 events might lead to deadlocks or other - * nasty side effects. - * - * The "video currently streaming" condition can't be detected by the irqqueue - * being empty, as a request can still be in flight. A separate "queue paused" - * flag is thus needed. - * - * The paused flag will be set when we try to retrieve the irqqueue head if the - * queue is empty, and cleared when we queue a buffer. - * - * The USB request completion handler will get the buffer at the irqqueue head - * under protection of the queue spinlock. If the queue is empty, the streaming - * paused flag will be set. Right after releasing the spinlock a userspace - * application can queue a buffer. The flag will then cleared, and the ioctl - * handler will restart the video stream. - */ static void uvc_video_complete(struct usb_ep *ep, struct usb_request *req) { struct uvc_video *video = req->context; struct uvc_video_queue *queue = &video->queue; - struct uvc_buffer *buf; unsigned long flags; - int ret; switch (req->status) { case 0: @@ -188,39 +156,20 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) case -ESHUTDOWN: /* disconnect from host. */ uvcg_dbg(&video->uvc->func, "VS request cancelled.\n"); uvcg_queue_cancel(queue, 1); - goto requeue; + break; default: uvcg_info(&video->uvc->func, "VS request completed with status %d.\n", req->status); uvcg_queue_cancel(queue, 0); - goto requeue; } - spin_lock_irqsave(&video->queue.irqlock, flags); - buf = uvcg_queue_head(&video->queue); - if (buf == NULL) { - spin_unlock_irqrestore(&video->queue.irqlock, flags); - goto requeue; - } - - video->encode(req, video, buf); - - ret = uvcg_video_ep_queue(video, req); - spin_unlock_irqrestore(&video->queue.irqlock, flags); - - if (ret < 0) { - uvcg_queue_cancel(queue, 0); - goto requeue; - } - - return; - -requeue: spin_lock_irqsave(&video->req_lock, flags); list_add_tail(&req->list, &video->req_free); spin_unlock_irqrestore(&video->req_lock, flags); + + schedule_work(&video->pump); } static int @@ -294,18 +243,15 @@ error: * This function fills the available USB requests (listed in req_free) with * video data from the queued buffers. */ -int uvcg_video_pump(struct uvc_video *video) +static void uvcg_video_pump(struct work_struct *work) { + struct uvc_video *video = container_of(work, struct uvc_video, pump); struct uvc_video_queue *queue = &video->queue; struct usb_request *req; struct uvc_buffer *buf; unsigned long flags; int ret; - /* FIXME TODO Race between uvcg_video_pump and requests completion - * handler ??? - */ - while (1) { /* Retrieve the first available USB request, protected by the * request lock. @@ -313,7 +259,7 @@ int uvcg_video_pump(struct uvc_video *video) spin_lock_irqsave(&video->req_lock, flags); if (list_empty(&video->req_free)) { spin_unlock_irqrestore(&video->req_lock, flags); - return 0; + return; } req = list_first_entry(&video->req_free, struct usb_request, list); @@ -345,7 +291,7 @@ int uvcg_video_pump(struct uvc_video *video) spin_lock_irqsave(&video->req_lock, flags); list_add_tail(&req->list, &video->req_free); spin_unlock_irqrestore(&video->req_lock, flags); - return 0; + return; } /* @@ -363,6 +309,9 @@ int uvcg_video_enable(struct uvc_video *video, int enable) } if (!enable) { + cancel_work_sync(&video->pump); + uvcg_queue_cancel(&video->queue, 0); + for (i = 0; i < UVC_NUM_REQUESTS; ++i) if (video->req[i]) usb_ep_dequeue(video->ep, video->req[i]); @@ -384,7 +333,9 @@ int uvcg_video_enable(struct uvc_video *video, int enable) } else video->encode = uvc_video_encode_isoc; - return uvcg_video_pump(video); + schedule_work(&video->pump); + + return ret; } /* @@ -394,6 +345,7 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc) { INIT_LIST_HEAD(&video->req_free); spin_lock_init(&video->req_lock); + INIT_WORK(&video->pump, uvcg_video_pump); video->uvc = uvc; video->fcc = V4L2_PIX_FMT_YUYV; diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h index dff12103f696..03adeefa343b 100644 --- a/drivers/usb/gadget/function/uvc_video.h +++ b/drivers/usb/gadget/function/uvc_video.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0 */ /* * uvc_video.h -- USB Video Class Gadget driver * @@ -14,8 +14,6 @@ struct uvc_video; -int uvcg_video_pump(struct uvc_video *video); - int uvcg_video_enable(struct uvc_video *video, int enable); int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc); diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c index f18f77584fc2..9ed22c5fb7fe 100644 --- a/drivers/usb/gadget/legacy/mass_storage.c +++ b/drivers/usb/gadget/legacy/mass_storage.c @@ -229,18 +229,8 @@ static struct usb_composite_driver msg_driver = { .unbind = msg_unbind, }; +module_usb_composite_driver(msg_driver); + MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Michal Nazarewicz"); MODULE_LICENSE("GPL"); - -static int __init msg_init(void) -{ - return usb_composite_probe(&msg_driver); -} -module_init(msg_init); - -static void __exit msg_cleanup(void) -{ - usb_composite_unregister(&msg_driver); -} -module_exit(msg_cleanup); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/core.c b/drivers/usb/gadget/udc/aspeed-vhub/core.c index f8d35dd60c34..cdf96911e4b1 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/core.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/core.c @@ -134,11 +134,15 @@ static irqreturn_t ast_vhub_irq(int irq, void *data) } /* Handle device interrupts */ - for (i = 0; i < vhub->max_ports; i++) { - u32 dev_mask = VHUB_IRQ_DEVICE1 << i; + if (istat & vhub->port_irq_mask) { + unsigned long bitmap = istat; + int offset = VHUB_IRQ_DEV1_BIT; + int size = VHUB_IRQ_DEV1_BIT + vhub->max_ports; - if (istat & dev_mask) + for_each_set_bit_from(offset, &bitmap, size) { + i = offset - VHUB_IRQ_DEV1_BIT; ast_vhub_dev_irq(&vhub->ports[i].dev); + } } /* Handle top-level vHub EP0 interrupts */ @@ -332,6 +336,8 @@ static int ast_vhub_probe(struct platform_device *pdev) spin_lock_init(&vhub->lock); vhub->pdev = pdev; + vhub->port_irq_mask = GENMASK(VHUB_IRQ_DEV1_BIT + vhub->max_ports - 1, + VHUB_IRQ_DEV1_BIT); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); vhub->regs = devm_ioremap_resource(&pdev->dev, res); @@ -402,7 +408,9 @@ static int ast_vhub_probe(struct platform_device *pdev) goto err; /* Init hub emulation */ - ast_vhub_init_hub(vhub); + rc = ast_vhub_init_hub(vhub); + if (rc) + goto err; /* Initialize HW */ ast_vhub_init_hw(vhub); diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c index 6e565c3dbb5b..6497185ec4e7 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -50,6 +50,7 @@ #define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff)) enum { + AST_VHUB_STR_INDEX_MAX = 4, AST_VHUB_STR_MANUF = 3, AST_VHUB_STR_PRODUCT = 2, AST_VHUB_STR_SERIAL = 1, @@ -72,13 +73,6 @@ static const struct usb_device_descriptor ast_vhub_dev_desc = { .bNumConfigurations = 1, }; -/* Patches to the above when forcing USB1 mode */ -static void ast_vhub_patch_dev_desc_usb1(struct usb_device_descriptor *desc) -{ - desc->bcdUSB = cpu_to_le16(0x0100); - desc->bDeviceProtocol = 0; -} - /* * Configuration descriptor: same comments as above * regarding handling USB1 mode. @@ -302,31 +296,81 @@ static int ast_vhub_rep_desc(struct ast_vhub_ep *ep, if (len > dsize) len = dsize; - /* Patch it if forcing USB1 */ - if (desc_type == USB_DT_DEVICE && ep->vhub->force_usb1) - ast_vhub_patch_dev_desc_usb1(ep->buf); - /* Shoot it from the EP buffer */ return ast_vhub_reply(ep, NULL, len); } +static struct usb_gadget_strings* +ast_vhub_str_of_container(struct usb_gadget_string_container *container) +{ + return (struct usb_gadget_strings *)container->stash; +} + +static int ast_vhub_collect_languages(struct ast_vhub *vhub, void *buf, + size_t size) +{ + int rc, hdr_len, nlangs, max_langs; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + struct usb_string_descriptor *sdesc = buf; + + nlangs = 0; + hdr_len = sizeof(struct usb_descriptor_header); + max_langs = (size - hdr_len) / sizeof(sdesc->wData[0]); + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + if (nlangs >= max_langs) + break; + + lang_str = ast_vhub_str_of_container(container); + sdesc->wData[nlangs++] = cpu_to_le16(lang_str->language); + } + + rc = hdr_len + nlangs * sizeof(sdesc->wData[0]); + sdesc->bLength = rc; + sdesc->bDescriptorType = USB_DT_STRING; + + return rc; +} + +static struct usb_gadget_strings *ast_vhub_lookup_string(struct ast_vhub *vhub, + u16 lang_id) +{ + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + list_for_each_entry(container, &vhub->vhub_str_desc, list) { + lang_str = ast_vhub_str_of_container(container); + if (lang_str->language == lang_id) + return lang_str; + } + + return NULL; +} + static int ast_vhub_rep_string(struct ast_vhub_ep *ep, u8 string_id, u16 lang_id, u16 len) { - int rc = usb_gadget_get_string(&ep->vhub->vhub_str_desc, - string_id, ep->buf); + int rc; + u8 buf[256]; + struct ast_vhub *vhub = ep->vhub; + struct usb_gadget_strings *lang_str; - /* - * This should never happen unless we put too big strings in - * the array above - */ - BUG_ON(rc >= AST_VHUB_EP0_MAX_PACKET); + if (string_id == 0) { + rc = ast_vhub_collect_languages(vhub, buf, sizeof(buf)); + } else { + lang_str = ast_vhub_lookup_string(vhub, lang_id); + if (!lang_str) + return std_req_stall; - if (rc < 0) + rc = usb_gadget_get_string(lang_str, string_id, buf); + } + + if (rc < 0 || rc >= AST_VHUB_EP0_MAX_PACKET) return std_req_stall; /* Shoot it from the EP buffer */ + memcpy(ep->buf, buf, rc); return ast_vhub_reply(ep, NULL, min_t(u16, rc, len)); } @@ -832,11 +876,148 @@ void ast_vhub_hub_reset(struct ast_vhub *vhub) writel(0, vhub->regs + AST_VHUB_EP1_STS_CHG); } -static void ast_vhub_init_desc(struct ast_vhub *vhub) +static void ast_vhub_of_parse_dev_desc(struct ast_vhub *vhub, + const struct device_node *vhub_np) +{ + u16 id; + u32 data; + + if (!of_property_read_u32(vhub_np, "vhub-vendor-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idVendor = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-product-id", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.idProduct = cpu_to_le16(id); + } + if (!of_property_read_u32(vhub_np, "vhub-device-revision", &data)) { + id = (u16)data; + vhub->vhub_dev_desc.bcdDevice = cpu_to_le16(id); + } +} + +static void ast_vhub_fixup_usb1_dev_desc(struct ast_vhub *vhub) +{ + vhub->vhub_dev_desc.bcdUSB = cpu_to_le16(0x0100); + vhub->vhub_dev_desc.bDeviceProtocol = 0; +} + +static struct usb_gadget_string_container* +ast_vhub_str_container_alloc(struct ast_vhub *vhub) +{ + unsigned int size; + struct usb_string *str_array; + struct usb_gadget_strings *lang_str; + struct usb_gadget_string_container *container; + + size = sizeof(*container); + size += sizeof(struct usb_gadget_strings); + size += sizeof(struct usb_string) * AST_VHUB_STR_INDEX_MAX; + container = devm_kzalloc(&vhub->pdev->dev, size, GFP_KERNEL); + if (!container) + return ERR_PTR(-ENOMEM); + + lang_str = ast_vhub_str_of_container(container); + str_array = (struct usb_string *)(lang_str + 1); + lang_str->strings = str_array; + return container; +} + +static void ast_vhub_str_deep_copy(struct usb_gadget_strings *dest, + const struct usb_gadget_strings *src) { + struct usb_string *src_array = src->strings; + struct usb_string *dest_array = dest->strings; + + dest->language = src->language; + if (src_array && dest_array) { + do { + *dest_array = *src_array; + dest_array++; + src_array++; + } while (src_array->s); + } +} + +static int ast_vhub_str_alloc_add(struct ast_vhub *vhub, + const struct usb_gadget_strings *src_str) +{ + struct usb_gadget_strings *dest_str; + struct usb_gadget_string_container *container; + + container = ast_vhub_str_container_alloc(vhub); + if (IS_ERR(container)) + return PTR_ERR(container); + + dest_str = ast_vhub_str_of_container(container); + ast_vhub_str_deep_copy(dest_str, src_str); + list_add_tail(&container->list, &vhub->vhub_str_desc); + + return 0; +} + +static const struct { + const char *name; + u8 id; +} str_id_map[] = { + {"manufacturer", AST_VHUB_STR_MANUF}, + {"product", AST_VHUB_STR_PRODUCT}, + {"serial-number", AST_VHUB_STR_SERIAL}, + {}, +}; + +static int ast_vhub_of_parse_str_desc(struct ast_vhub *vhub, + const struct device_node *desc_np) +{ + u32 langid; + int ret = 0; + int i, offset; + const char *str; + struct device_node *child; + struct usb_string str_array[AST_VHUB_STR_INDEX_MAX]; + struct usb_gadget_strings lang_str = { + .strings = (struct usb_string *)str_array, + }; + + for_each_child_of_node(desc_np, child) { + if (of_property_read_u32(child, "reg", &langid)) + continue; /* no language identifier specified */ + + if (!usb_validate_langid(langid)) + continue; /* invalid language identifier */ + + lang_str.language = langid; + for (i = offset = 0; str_id_map[i].name; i++) { + str = of_get_property(child, str_id_map[i].name, NULL); + if (str) { + str_array[offset].s = str; + str_array[offset].id = str_id_map[i].id; + offset++; + } + } + str_array[offset].id = 0; + str_array[offset].s = NULL; + + ret = ast_vhub_str_alloc_add(vhub, &lang_str); + if (ret) + break; + } + + return ret; +} + +static int ast_vhub_init_desc(struct ast_vhub *vhub) +{ + int ret; + struct device_node *desc_np; + const struct device_node *vhub_np = vhub->pdev->dev.of_node; + /* Initialize vhub Device Descriptor. */ memcpy(&vhub->vhub_dev_desc, &ast_vhub_dev_desc, sizeof(vhub->vhub_dev_desc)); + ast_vhub_of_parse_dev_desc(vhub, vhub_np); + if (vhub->force_usb1) + ast_vhub_fixup_usb1_dev_desc(vhub); /* Initialize vhub Configuration Descriptor. */ memcpy(&vhub->vhub_conf_desc, &ast_vhub_conf_desc, @@ -848,15 +1029,20 @@ static void ast_vhub_init_desc(struct ast_vhub *vhub) vhub->vhub_hub_desc.bNbrPorts = vhub->max_ports; /* Initialize vhub String Descriptors. */ - memcpy(&vhub->vhub_str_desc, &ast_vhub_strings, - sizeof(vhub->vhub_str_desc)); + INIT_LIST_HEAD(&vhub->vhub_str_desc); + desc_np = of_get_child_by_name(vhub_np, "vhub-strings"); + if (desc_np) + ret = ast_vhub_of_parse_str_desc(vhub, desc_np); + else + ret = ast_vhub_str_alloc_add(vhub, &ast_vhub_strings); + + return ret; } -void ast_vhub_init_hub(struct ast_vhub *vhub) +int ast_vhub_init_hub(struct ast_vhub *vhub) { vhub->speed = USB_SPEED_UNKNOWN; INIT_WORK(&vhub->wake_work, ast_vhub_wake_work); - ast_vhub_init_desc(vhub); + return ast_vhub_init_desc(vhub); } - diff --git a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h index fac79ef6d669..2e5a1ef14a75 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/vhub.h +++ b/drivers/usb/gadget/udc/aspeed-vhub/vhub.h @@ -51,14 +51,11 @@ #define VHUB_CTRL_UPSTREAM_CONNECT (1 << 0) /* IER & ISR */ +#define VHUB_IRQ_DEV1_BIT 9 #define VHUB_IRQ_USB_CMD_DEADLOCK (1 << 18) #define VHUB_IRQ_EP_POOL_NAK (1 << 17) #define VHUB_IRQ_EP_POOL_ACK_STALL (1 << 16) -#define VHUB_IRQ_DEVICE5 (1 << 13) -#define VHUB_IRQ_DEVICE4 (1 << 12) -#define VHUB_IRQ_DEVICE3 (1 << 11) -#define VHUB_IRQ_DEVICE2 (1 << 10) -#define VHUB_IRQ_DEVICE1 (1 << 9) +#define VHUB_IRQ_DEVICE1 (1 << (VHUB_IRQ_DEV1_BIT)) #define VHUB_IRQ_BUS_RESUME (1 << 8) #define VHUB_IRQ_BUS_SUSPEND (1 << 7) #define VHUB_IRQ_BUS_RESET (1 << 6) @@ -402,6 +399,7 @@ struct ast_vhub { /* Per-port info */ struct ast_vhub_port *ports; u32 max_ports; + u32 port_irq_mask; /* Generic EP data structures */ struct ast_vhub_ep *epns; @@ -423,7 +421,7 @@ struct ast_vhub { struct usb_device_descriptor vhub_dev_desc; struct ast_vhub_full_cdesc vhub_conf_desc; struct usb_hub_descriptor vhub_hub_desc; - struct usb_gadget_strings vhub_str_desc; + struct list_head vhub_str_desc; }; /* Standard request handlers result codes */ @@ -533,7 +531,7 @@ int __ast_vhub_simple_reply(struct ast_vhub_ep *ep, int len, ...); __VA_ARGS__) /* hub.c */ -void ast_vhub_init_hub(struct ast_vhub *vhub); +int ast_vhub_init_hub(struct ast_vhub *vhub); enum std_req_rc ast_vhub_std_hub_request(struct ast_vhub_ep *ep, struct usb_ctrlrequest *crq); enum std_req_rc ast_vhub_class_hub_request(struct ast_vhub_ep *ep, diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index b771a854e29c..d69f61ff0181 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -2043,10 +2043,56 @@ static const struct usba_udc_errata at91sam9g45_errata = { .pulse_bias = at91sam9g45_pulse_bias, }; +static const struct usba_ep_config ep_config_sam9[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 3 */ + { .nr_banks = 3, .can_dma = 1 }, /* ep 4 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ +}; + +static const struct usba_ep_config ep_config_sama5[] __initconst = { + { .nr_banks = 1 }, /* ep 0 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 1 */ + { .nr_banks = 3, .can_dma = 1, .can_isoc = 1 }, /* ep 2 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 3 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 4 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 5 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 6 */ + { .nr_banks = 2, .can_dma = 1, .can_isoc = 1 }, /* ep 7 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 8 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 9 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 10 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 11 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 12 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 13 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 14 */ + { .nr_banks = 2, .can_isoc = 1 }, /* ep 15 */ +}; + +static const struct usba_udc_config udc_at91sam9rl_cfg = { + .errata = &at91sam9rl_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_at91sam9g45_cfg = { + .errata = &at91sam9g45_errata, + .config = ep_config_sam9, + .num_ep = ARRAY_SIZE(ep_config_sam9), +}; + +static const struct usba_udc_config udc_sama5d3_cfg = { + .config = ep_config_sama5, + .num_ep = ARRAY_SIZE(ep_config_sama5), +}; + static const struct of_device_id atmel_udc_dt_ids[] = { - { .compatible = "atmel,at91sam9rl-udc", .data = &at91sam9rl_errata }, - { .compatible = "atmel,at91sam9g45-udc", .data = &at91sam9g45_errata }, - { .compatible = "atmel,sama5d3-udc" }, + { .compatible = "atmel,at91sam9rl-udc", .data = &udc_at91sam9rl_cfg }, + { .compatible = "atmel,at91sam9g45-udc", .data = &udc_at91sam9g45_cfg }, + { .compatible = "atmel,sama5d3-udc", .data = &udc_sama5d3_cfg }, { /* sentinel */ } }; @@ -2055,18 +2101,19 @@ MODULE_DEVICE_TABLE(of, atmel_udc_dt_ids); static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, struct usba_udc *udc) { - u32 val; struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; struct device_node *pp; int i, ret; struct usba_ep *eps, *ep; + const struct usba_udc_config *udc_config; match = of_match_node(atmel_udc_dt_ids, np); if (!match) return ERR_PTR(-EINVAL); - udc->errata = match->data; + udc_config = match->data; + udc->errata = udc_config->errata; udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc"); if (IS_ERR(udc->pmc)) udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9rl-pmc"); @@ -2082,8 +2129,7 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { pp = NULL; - while ((pp = of_get_next_child(np, pp))) - udc->num_ep++; + udc->num_ep = udc_config->num_ep; udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); @@ -2100,52 +2146,38 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, pp = NULL; i = 0; - while ((pp = of_get_next_child(np, pp)) && i < udc->num_ep) { + while (i < udc->num_ep) { + const struct usba_ep_config *ep_cfg = &udc_config->config[i]; + ep = &eps[i]; - ret = of_property_read_u32(pp, "reg", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: reg error(%d)\n", ret); - goto err; - } - ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : val; + ep->index = fifo_mode ? udc->fifo_cfg[i].hw_ep_num : i; + + /* Only the first EP is 64 bytes */ + if (ep->index == 0) + ep->fifo_size = 64; + else + ep->fifo_size = 1024; - ret = of_property_read_u32(pp, "atmel,fifo-size", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: fifo-size error(%d)\n", ret); - goto err; - } if (fifo_mode) { - if (val < udc->fifo_cfg[i].fifo_size) { + if (ep->fifo_size < udc->fifo_cfg[i].fifo_size) dev_warn(&pdev->dev, - "Using max fifo-size value from DT\n"); - ep->fifo_size = val; - } else { + "Using default max fifo-size value\n"); + else ep->fifo_size = udc->fifo_cfg[i].fifo_size; - } - } else { - ep->fifo_size = val; } - ret = of_property_read_u32(pp, "atmel,nb-banks", &val); - if (ret) { - dev_err(&pdev->dev, "of_probe: nb-banks error(%d)\n", ret); - goto err; - } + ep->nr_banks = ep_cfg->nr_banks; if (fifo_mode) { - if (val < udc->fifo_cfg[i].nr_banks) { + if (ep->nr_banks < udc->fifo_cfg[i].nr_banks) dev_warn(&pdev->dev, - "Using max nb-banks value from DT\n"); - ep->nr_banks = val; - } else { + "Using default max nb-banks value\n"); + else ep->nr_banks = udc->fifo_cfg[i].nr_banks; - } - } else { - ep->nr_banks = val; } - ep->can_dma = of_property_read_bool(pp, "atmel,can-dma"); - ep->can_isoc = of_property_read_bool(pp, "atmel,can-isoc"); + ep->can_dma = ep_cfg->can_dma; + ep->can_isoc = ep_cfg->can_isoc; sprintf(ep->name, "ep%d", ep->index); ep->ep.name = ep->name; diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index a0225e4543d4..48e332439ed5 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -290,6 +290,12 @@ struct usba_ep { #endif }; +struct usba_ep_config { + u8 nr_banks; + unsigned int can_dma:1; + unsigned int can_isoc:1; +}; + struct usba_request { struct usb_request req; struct list_head queue; @@ -307,6 +313,12 @@ struct usba_udc_errata { void (*pulse_bias)(struct usba_udc *udc); }; +struct usba_udc_config { + const struct usba_udc_errata *errata; + const struct usba_ep_config *config; + const int num_ep; +}; + struct usba_udc { /* Protect hw registers from concurrent modifications */ spinlock_t lock; diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 9b11046480fe..2e28dde8376f 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -1297,6 +1297,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE); usb_gadget_disconnect(udc->gadget); + if (udc->gadget->irq) + synchronize_irq(udc->gadget->irq); udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index 6e3e3ebf715f..0eeaead5acea 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -187,31 +187,31 @@ static const struct { USB_EP_CAPS(USB_EP_CAPS_TYPE_BULK, USB_EP_CAPS_DIR_IN)), /* and now some generic EPs so we have enough in multi config */ - EP_INFO("ep3out", + EP_INFO("ep-aout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep4in", + EP_INFO("ep-bin", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), - EP_INFO("ep5out", + EP_INFO("ep-cout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep6out", + EP_INFO("ep-dout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep7in", + EP_INFO("ep-ein", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), - EP_INFO("ep8out", + EP_INFO("ep-fout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep9in", + EP_INFO("ep-gin", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), - EP_INFO("ep10out", + EP_INFO("ep-hout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep11out", + EP_INFO("ep-iout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep12in", + EP_INFO("ep-jin", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), - EP_INFO("ep13out", + EP_INFO("ep-kout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), - EP_INFO("ep14in", + EP_INFO("ep-lin", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_IN)), - EP_INFO("ep15out", + EP_INFO("ep-mout", USB_EP_CAPS(TYPE_BULK_OR_INT, USB_EP_CAPS_DIR_OUT)), #undef EP_INFO @@ -427,6 +427,7 @@ static void set_link_state_by_speed(struct dummy_hcd *dum_hcd) /* caller must hold lock */ static void set_link_state(struct dummy_hcd *dum_hcd) + __must_hold(&dum->lock) { struct dummy *dum = dum_hcd->dum; unsigned int power_bit; diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index febabde62f71..b2638e83bb49 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -2440,8 +2440,8 @@ static int fsl_udc_probe(struct platform_device *pdev) udc_controller->max_ep = (dccparams & DCCPARAMS_DEN_MASK) * 2; udc_controller->irq = platform_get_irq(pdev, 0); - if (!udc_controller->irq) { - ret = -ENODEV; + if (udc_controller->irq <= 0) { + ret = udc_controller->irq ? : -ENODEV; goto err_iounmap; } diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index cb997b82c008..465d0b7c6522 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -1614,17 +1614,17 @@ static int lpc32xx_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; u16 maxpacket; u32 tmp; unsigned long flags; /* Verify EP data */ if ((!_ep) || (!ep) || (!desc) || - (desc->bDescriptorType != USB_DT_ENDPOINT)) { - dev_dbg(udc->dev, "bad ep or descriptor\n"); + (desc->bDescriptorType != USB_DT_ENDPOINT)) return -EINVAL; - } + + udc = ep->udc; maxpacket = usb_endpoint_maxp(desc); if ((maxpacket == 0) || (maxpacket > ep->maxpacket)) { dev_dbg(udc->dev, "bad ep descriptor's packet size\n"); @@ -1872,7 +1872,7 @@ static int lpc32xx_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) { struct lpc32xx_ep *ep = container_of(_ep, struct lpc32xx_ep, ep); - struct lpc32xx_udc *udc = ep->udc; + struct lpc32xx_udc *udc; unsigned long flags; if ((!ep) || (ep->hwep_num <= 1)) @@ -1882,6 +1882,7 @@ static int lpc32xx_ep_set_halt(struct usb_ep *_ep, int value) if (ep->is_in) return -EAGAIN; + udc = ep->udc; spin_lock_irqsave(&udc->lock, flags); if (value == 1) { diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c index 75d16a8902e6..931e6362a13d 100644 --- a/drivers/usb/gadget/udc/m66592-udc.c +++ b/drivers/usb/gadget/udc/m66592-udc.c @@ -1667,7 +1667,7 @@ static int m66592_probe(struct platform_device *pdev) err_add_udc: m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); - + m66592->ep0_req = NULL; clean_up3: if (m66592->pdata->on_chip) { clk_disable(m66592->clk); diff --git a/drivers/usb/gadget/udc/max3420_udc.c b/drivers/usb/gadget/udc/max3420_udc.c index 8fbc083b6732..23f33946d80c 100644 --- a/drivers/usb/gadget/udc/max3420_udc.c +++ b/drivers/usb/gadget/udc/max3420_udc.c @@ -901,7 +901,7 @@ loop: } set_current_state(TASK_RUNNING); - dev_info(udc->dev, "SPI thread exiting"); + dev_info(udc->dev, "SPI thread exiting\n"); return 0; } diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c index 35e02a8d0091..5bb0568b934e 100644 --- a/drivers/usb/gadget/udc/mv_u3d_core.c +++ b/drivers/usb/gadget/udc/mv_u3d_core.c @@ -1548,7 +1548,7 @@ static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num, delegate = true; /* delegate USB standard requests to the gadget driver */ - if (delegate == true) { + if (delegate) { /* USB requests handled by gadget */ if (setup->wLength) { /* DATA phase from gadget, STATUS phase from u3d */ diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 5af0fe9c61d7..928057b206f1 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -54,7 +54,7 @@ static const char * const ep_name[] = { * * If use_dma is disabled, pio will be used instead. */ -static bool use_dma = 0; +static bool use_dma = false; module_param(use_dma, bool, 0644); /* diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index bf87c6c0d7f6..4139da885651 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2576,7 +2576,7 @@ omap_ep_setup(char *name, u8 addr, u8 type, case USB_ENDPOINT_XFER_INT: ep->ep.caps.type_int = true; break; - }; + } if (addr & USB_DIR_IN) ep->ep.caps.dir_in = true; diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index 0507a2ca0f55..80002d97b59d 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -251,10 +251,6 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep, static void s3c2410_udc_nuke(struct s3c2410_udc *udc, struct s3c2410_ep *ep, int status) { - /* Sanity check */ - if (&ep->queue == NULL) - return; - while (!list_empty(&ep->queue)) { struct s3c2410_request *req; req = list_entry(ep->queue.next, struct s3c2410_request, diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index dfabc54cdc27..bbe1a04686da 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -158,6 +158,30 @@ #define SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK GENMASK(7, 0) #define SSPX_CORE_CNT32_POLL_TBURST_MAX(x) ((x) & \ SSPX_CORE_CNT32_POLL_TBURST_MAX_MASK) +#define SSPX_CORE_CNT56 0x6fc +#define SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(x) ((x) & \ + SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK) +#define SSPX_CORE_CNT57 0x700 +#define SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(x) ((x) & \ + SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK) +#define SSPX_CORE_CNT65 0x720 +#define SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK) +#define SSPX_CORE_CNT66 0x724 +#define SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK) +#define SSPX_CORE_CNT67 0x728 +#define SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(x) ((x) & \ + SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK) +#define SSPX_CORE_CNT72 0x73c +#define SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK GENMASK(19, 0) +#define SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(x) ((x) & \ + SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK) #define SSPX_CORE_PADCTL4 0x750 #define SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK GENMASK(19, 0) #define SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3(x) ((x) & \ @@ -492,6 +516,7 @@ struct tegra_xudc { bool powergated; struct usb_phy **usbphy; + struct usb_phy *curr_usbphy; struct notifier_block vbus_nb; struct completion disconnect_complete; @@ -530,6 +555,7 @@ struct tegra_xudc_soc { bool invalid_seq_num; bool pls_quirk; bool port_reset_quirk; + bool port_speed_quirk; bool has_ipfs; }; @@ -599,6 +625,78 @@ static inline void dump_trb(struct tegra_xudc *xudc, const char *type, trb->control); } +static void tegra_xudc_limit_port_speed(struct tegra_xudc *xudc) +{ + u32 val; + + /* limit port speed to gen 1 */ + val = xudc_readl(xudc, SSPX_CORE_CNT56); + val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x260); + xudc_writel(xudc, val, SSPX_CORE_CNT56); + + val = xudc_readl(xudc, SSPX_CORE_CNT57); + val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x6D6); + xudc_writel(xudc, val, SSPX_CORE_CNT57); + + val = xudc_readl(xudc, SSPX_CORE_CNT65); + val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK); + val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT66); + val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK); + val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT67); + val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK); + val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x4B0); + xudc_writel(xudc, val, SSPX_CORE_CNT67); + + val = xudc_readl(xudc, SSPX_CORE_CNT72); + val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK); + val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x10); + xudc_writel(xudc, val, SSPX_CORE_CNT72); +} + +static void tegra_xudc_restore_port_speed(struct tegra_xudc *xudc) +{ + u32 val; + + /* restore port speed to gen2 */ + val = xudc_readl(xudc, SSPX_CORE_CNT56); + val &= ~(SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT56_SCD_BIT0_TRPT_MAX(0x438); + xudc_writel(xudc, val, SSPX_CORE_CNT56); + + val = xudc_readl(xudc, SSPX_CORE_CNT57); + val &= ~(SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX_MASK); + val |= SSPX_CORE_CNT57_SCD_BIT1_TRPT_MAX(0x528); + xudc_writel(xudc, val, SSPX_CORE_CNT57); + + val = xudc_readl(xudc, SSPX_CORE_CNT65); + val &= ~(SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID_MASK); + val |= SSPX_CORE_CNT65_TX_SCD_END_TRPT_MID(0xE10); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT66); + val &= ~(SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID_MASK); + val |= SSPX_CORE_CNT66_TX_SCD_BIT0_TRPT_MID(0x348); + xudc_writel(xudc, val, SSPX_CORE_CNT66); + + val = xudc_readl(xudc, SSPX_CORE_CNT67); + val &= ~(SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID_MASK); + val |= SSPX_CORE_CNT67_TX_SCD_BIT1_TRPT_MID(0x5a0); + xudc_writel(xudc, val, SSPX_CORE_CNT67); + + val = xudc_readl(xudc, SSPX_CORE_CNT72); + val &= ~(SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT_MASK); + val |= SSPX_CORE_CNT72_SCD_LFPS_TIMEOUT(0x1c21); + xudc_writel(xudc, val, SSPX_CORE_CNT72); +} + static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) { int err; @@ -631,6 +729,9 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) reinit_completion(&xudc->disconnect_complete); + if (xudc->soc->port_speed_quirk) + tegra_xudc_restore_port_speed(xudc); + phy_set_mode_ext(xudc->curr_utmi_phy, PHY_MODE_USB_OTG, USB_ROLE_NONE); pls = (xudc_readl(xudc, PORTSC) & PORTSC_PLS_MASK) >> @@ -719,6 +820,7 @@ static int tegra_xudc_vbus_notify(struct notifier_block *nb, if (!xudc->suspended && phy_index != -1) { xudc->curr_utmi_phy = xudc->utmi_phy[phy_index]; xudc->curr_usb3_phy = xudc->usb3_phy[phy_index]; + xudc->curr_usbphy = usbphy; schedule_work(&xudc->usb_role_sw_work); } @@ -2042,6 +2144,20 @@ static int tegra_xudc_gadget_stop(struct usb_gadget *gadget) return 0; } +static int tegra_xudc_gadget_vbus_draw(struct usb_gadget *gadget, + unsigned int m_a) +{ + int ret = 0; + struct tegra_xudc *xudc = to_xudc(gadget); + + dev_dbg(xudc->dev, "%s: %u mA\n", __func__, m_a); + + if (xudc->curr_usbphy->chg_type == SDP_TYPE) + ret = usb_phy_set_power(xudc->curr_usbphy, m_a); + + return ret; +} + static int tegra_xudc_set_selfpowered(struct usb_gadget *gadget, int is_on) { struct tegra_xudc *xudc = to_xudc(gadget); @@ -2058,6 +2174,7 @@ static struct usb_gadget_ops tegra_xudc_gadget_ops = { .pullup = tegra_xudc_gadget_pullup, .udc_start = tegra_xudc_gadget_start, .udc_stop = tegra_xudc_gadget_stop, + .vbus_draw = tegra_xudc_gadget_vbus_draw, .set_selfpowered = tegra_xudc_set_selfpowered, }; @@ -3274,6 +3391,9 @@ static void tegra_xudc_device_params_init(struct tegra_xudc *xudc) xudc_writel(xudc, val, BLCG); } + if (xudc->soc->port_speed_quirk) + tegra_xudc_limit_port_speed(xudc); + /* Set a reasonable U3 exit timer value. */ val = xudc_readl(xudc, SSPX_CORE_PADCTL4); val &= ~(SSPX_CORE_PADCTL4_RXDAT_VLD_TIMEOUT_U3_MASK); @@ -3506,6 +3626,7 @@ static struct tegra_xudc_soc tegra210_xudc_soc_data = { .invalid_seq_num = true, .pls_quirk = true, .port_reset_quirk = true, + .port_speed_quirk = false, .has_ipfs = true, }; @@ -3519,6 +3640,21 @@ static struct tegra_xudc_soc tegra186_xudc_soc_data = { .invalid_seq_num = false, .pls_quirk = false, .port_reset_quirk = false, + .port_speed_quirk = false, + .has_ipfs = false, +}; + +static struct tegra_xudc_soc tegra194_xudc_soc_data = { + .clock_names = tegra186_xudc_clock_names, + .num_clks = ARRAY_SIZE(tegra186_xudc_clock_names), + .num_phys = 4, + .u1_enable = true, + .u2_enable = true, + .lpm_enable = true, + .invalid_seq_num = false, + .pls_quirk = false, + .port_reset_quirk = false, + .port_speed_quirk = true, .has_ipfs = false, }; @@ -3531,6 +3667,10 @@ static const struct of_device_id tegra_xudc_of_match[] = { .compatible = "nvidia,tegra186-xudc", .data = &tegra186_xudc_soc_data }, + { + .compatible = "nvidia,tegra194-xudc", + .data = &tegra194_xudc_soc_data + }, { } }; MODULE_DEVICE_TABLE(of, tegra_xudc_of_match); diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c index b1cfc8279c3d..709553bdb233 100644 --- a/drivers/usb/gadget/udc/udc-xilinx.c +++ b/drivers/usb/gadget/udc/udc-xilinx.c @@ -1732,6 +1732,7 @@ static void xudc_set_clear_feature(struct xusb_udc *udc) * Process setup packet and delegate to gadget layer. */ static void xudc_handle_setup(struct xusb_udc *udc) + __must_hold(&udc->lock) { struct xusb_ep *ep0 = &udc->ep[0]; struct usb_ctrlrequest setup; diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c index 7c24d1ce1088..58a4d3325090 100644 --- a/drivers/usb/gadget/usbstring.c +++ b/drivers/usb/gadget/usbstring.c @@ -65,3 +65,27 @@ usb_gadget_get_string (const struct usb_gadget_strings *table, int id, u8 *buf) return buf [0]; } EXPORT_SYMBOL_GPL(usb_gadget_get_string); + +/** + * usb_validate_langid - validate usb language identifiers + * @lang: usb language identifier + * + * Returns true for valid language identifier, otherwise false. + */ +bool usb_validate_langid(u16 langid) +{ + u16 primary_lang = langid & 0x3ff; /* bit [9:0] */ + u16 sub_lang = langid >> 10; /* bit [15:10] */ + + switch (primary_lang) { + case 0: + case 0x62 ... 0xfe: + case 0x100 ... 0x3ff: + return false; + } + if (!sub_lang) + return false; + + return true; +} +EXPORT_SYMBOL_GPL(usb_validate_langid); diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 8675e145ea8b..2040696d75b6 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -249,6 +249,9 @@ int usb_function_activate(struct usb_function *); int usb_interface_id(struct usb_configuration *, struct usb_function *); +int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, + struct usb_ep *_ep, u8 alt); + int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, struct usb_ep *_ep); diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 9411c08a5c7e..6a178177e4c9 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -42,6 +42,8 @@ struct usb_ep; * @num_mapped_sgs: number of SG entries mapped to DMA (internal) * @length: Length of that data * @stream_id: The stream id, when USB3.0 bulk streams are being used + * @is_last: Indicates if this is the last request of a stream_id before + * switching to a different stream (required for DWC3 controllers). * @no_interrupt: If true, hints that no completion irq is needed. * Helpful sometimes with deep request queues that are handled * directly by DMA controllers. @@ -104,6 +106,7 @@ struct usb_request { unsigned num_mapped_sgs; unsigned stream_id:16; + unsigned is_last:1; unsigned no_interrupt:1; unsigned zero:1; unsigned short_not_ok:1; @@ -373,6 +376,7 @@ struct usb_gadget_ops { * @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. + * @irq: the interrupt number for device controller. * * Gadgets have a mostly-portable "gadget driver" implementing device * functions, handling all usb configurations and interfaces. Gadget @@ -427,6 +431,7 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; + int irq; }; #define work_to_gadget(w) (container_of((w), struct usb_gadget, work)) @@ -773,6 +778,9 @@ struct usb_gadget_string_container { /* put descriptor for string with that id into buf (buflen >= 256) */ int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); +/* check if the given language identifier is valid */ +bool usb_validate_langid(u16 langid); + /*-------------------------------------------------------------------------*/ /* utility to simplify managing config descriptors */ |