aboutsummaryrefslogtreecommitdiffstatshomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/mach-dove/common.c4
-rw-r--r--arch/arm/mach-mvebu/board-v7.c3
-rw-r--r--arch/arm/mach-orion5x/board-mss2.c2
-rw-r--r--arch/arm/mach-orion5x/dns323-setup.c6
-rw-r--r--arch/arm/mach-orion5x/kurobox_pro-setup.c2
-rw-r--r--arch/arm/mach-orion5x/mv2120-setup.c2
-rw-r--r--arch/arm/mach-orion5x/net2big-setup.c2
-rw-r--r--arch/arm/mach-orion5x/terastation_pro2-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c2
-rw-r--r--arch/arm/mach-orion5x/ts409-setup.c2
10 files changed, 15 insertions, 12 deletions
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 3aea90bbb41a..35e978514591 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -82,7 +82,7 @@ static void __init dove_clk_init(void)
{
struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1;
struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
- struct clk *xor0, *xor1, *ge, *gephy;
+ struct clk *xor0, *xor1, *ge;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk);
@@ -102,7 +102,7 @@ static void __init dove_clk_init(void)
pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA);
xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0);
xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1);
- gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
+ dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY);
ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE);
orion_clkdev_add(NULL, "orion_spi.0", tclk);
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index fd5d0c8ff695..04ad651d13a0 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -86,6 +86,9 @@ static int __init mvebu_scan_mem(unsigned long node, const char *uname,
base = dt_mem_next_cell(dt_root_addr_cells, &reg);
size = dt_mem_next_cell(dt_root_size_cells, &reg);
+ if (size < MVEBU_DDR_TRAINING_AREA_SZ)
+ pr_warn("Too little memory to reserve for DDR training\n");
+
memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
}
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
index b0f16d223adf..9e3d69891d2f 100644
--- a/arch/arm/mach-orion5x/board-mss2.c
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -82,5 +82,5 @@ static void mss2_power_off(void)
void __init mss2_init(void)
{
/* register mss2 specific power-off method */
- pm_power_off = mss2_power_off;
+ register_platform_power_off(mss2_power_off);
}
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 062109efa0ec..fcd38ff7ca45 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -700,7 +700,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323a_power_off;
+ register_platform_power_off(dns323a_power_off);
break;
case DNS323_REV_B1:
/* 5182 built-in SATA init */
@@ -717,7 +717,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323b_power_off;
+ register_platform_power_off(dns323b_power_off);
break;
case DNS323_REV_C1:
/* 5182 built-in SATA init */
@@ -727,7 +727,7 @@ static void __init dns323_init(void)
if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
pr_err("DNS-323: failed to setup power-off GPIO\n");
- pm_power_off = dns323c_power_off;
+ register_platform_power_off(dns323c_power_off);
/* Now, -this- should theoretically be done by the sata_mv driver
* once I figure out what's going on there. Maybe the behaviour
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index acba06618080..339b10891808 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
/* register Kurobox Pro specific power-off method */
- pm_power_off = kurobox_pro_power_off;
+ register_platform_power_off(kurobox_pro_power_off);
}
#ifdef CONFIG_MACH_KUROBOX_PRO
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b7327a612835..5b0249f109cd 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -238,7 +238,7 @@ static void __init mv2120_init(void)
if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
pr_err("mv2120: failed to setup power-off GPIO\n");
- pm_power_off = mv2120_power_off;
+ register_platform_power_off(mv2120_power_off);
}
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 6ad9740b426b..4afd9b4c71a9 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -423,7 +423,7 @@ static void __init net2big_init(void)
if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = net2big_power_off;
+ register_platform_power_off(net2big_power_off);
else
pr_err("net2big: failed to configure power-off GPIO\n");
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 23a5521c6833..a9f01859d101 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -349,7 +349,7 @@ static void __init tsp2_init(void)
i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
/* register Terastation Pro II specific power-off method */
- pm_power_off = tsp2_power_off;
+ register_platform_power_off(tsp2_power_off);
}
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index bab8ba0e01ab..de9092e992c5 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_platform_power_off(qnap_tsx09_power_off);
}
MACHINE_START(TS209, "QNAP TS-109/TS-209")
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 8131982c10d9..725688aa5cba 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -312,7 +312,7 @@ static void __init qnap_ts409_init(void)
platform_device_register(&ts409_leds);
/* register tsx09 specific power-off method */
- pm_power_off = qnap_tsx09_power_off;
+ register_platform_power_off(qnap_tsx09_power_off);
}
MACHINE_START(TS409, "QNAP TS-409")
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.