diff options
| -rw-r--r-- | drivers/input/misc/uinput.c | 89 | ||||
| -rw-r--r-- | include/uapi/linux/uinput.h | 29 |
2 files changed, 58 insertions, 60 deletions
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index a16fc4a4bb1f..782df415e4d5 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -256,13 +256,22 @@ static void uinput_destroy_device(struct uinput_device *udev) static int uinput_create_device(struct uinput_device *udev) { struct input_dev *dev = udev->dev; - int error; + int error, nslot; if (udev->state != UIST_SETUP_COMPLETE) { printk(KERN_DEBUG "%s: write device info first\n", UINPUT_NAME); return -EINVAL; } + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + error = input_mt_init_slots(dev, nslot, 0); + if (error) + goto fail1; + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } + if (udev->ff_effects_max) { error = input_ff_create(dev, udev->ff_effects_max); if (error) @@ -308,10 +317,35 @@ static int uinput_open(struct inode *inode, struct file *file) return 0; } +static int uinput_validate_absinfo(struct input_dev *dev, unsigned int code, + const struct input_absinfo *abs) +{ + int min, max; + + min = abs->minimum; + max = abs->maximum; + + if ((min != 0 || max != 0) && max <= min) { + printk(KERN_DEBUG + "%s: invalid abs[%02x] min:%d max:%d\n", + UINPUT_NAME, code, min, max); + return -EINVAL; + } + + if (abs->flat > max - min) { + printk(KERN_DEBUG + "%s: abs_flat #%02x out of range: %d (min:%d/max:%d)\n", + UINPUT_NAME, code, abs->flat, min, max); + return -EINVAL; + } + + return 0; +} + static int uinput_validate_absbits(struct input_dev *dev) { unsigned int cnt; - int nslot; + int error; if (!test_bit(EV_ABS, dev->evbit)) return 0; @@ -321,38 +355,12 @@ static int uinput_validate_absbits(struct input_dev *dev) */ for_each_set_bit(cnt, dev->absbit, ABS_CNT) { - int min, max; - - min = input_abs_get_min(dev, cnt); - max = input_abs_get_max(dev, cnt); - - if ((min != 0 || max != 0) && max <= min) { - printk(KERN_DEBUG - "%s: invalid abs[%02x] min:%d max:%d\n", - UINPUT_NAME, cnt, - input_abs_get_min(dev, cnt), - input_abs_get_max(dev, cnt)); + if (!dev->absinfo) return -EINVAL; - } - - if (input_abs_get_flat(dev, cnt) > - input_abs_get_max(dev, cnt) - input_abs_get_min(dev, cnt)) { - printk(KERN_DEBUG - "%s: abs_flat #%02x out of range: %d " - "(min:%d/max:%d)\n", - UINPUT_NAME, cnt, - input_abs_get_flat(dev, cnt), - input_abs_get_min(dev, cnt), - input_abs_get_max(dev, cnt)); - return -EINVAL; - } - } - if (test_bit(ABS_MT_SLOT, dev->absbit)) { - nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; - input_mt_init_slots(dev, nslot, 0); - } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { - input_set_events_per_packet(dev, 60); + error = uinput_validate_absinfo(dev, cnt, &dev->absinfo[cnt]); + if (error) + return error; } return 0; @@ -375,7 +383,6 @@ static int uinput_dev_setup(struct uinput_device *udev, { struct uinput_setup setup; struct input_dev *dev; - int retval; if (udev->state == UIST_CREATED) return -EINVAL; @@ -395,10 +402,6 @@ static int uinput_dev_setup(struct uinput_device *udev, if (!dev->name) return -ENOMEM; - retval = uinput_validate_absbits(dev); - if (retval < 0) - return retval; - udev->state = UIST_SETUP_COMPLETE; return 0; } @@ -408,6 +411,7 @@ static int uinput_abs_setup(struct uinput_device *udev, { struct uinput_abs_setup setup = {}; struct input_dev *dev; + int error; if (size > sizeof(setup)) return -E2BIG; @@ -423,19 +427,16 @@ static int uinput_abs_setup(struct uinput_device *udev, dev = udev->dev; + error = uinput_validate_absinfo(dev, setup.code, &setup.absinfo); + if (error) + return error; + input_alloc_absinfo(dev); if (!dev->absinfo) return -ENOMEM; set_bit(setup.code, dev->absbit); dev->absinfo[setup.code] = setup.absinfo; - - /* - * We restore the state to UIST_NEW_DEVICE because the user has to call - * UI_DEV_SETUP in the last place before UI_DEV_CREATE to check the - * validity of the absbits. - */ - udev->state = UIST_NEW_DEVICE; return 0; } diff --git a/include/uapi/linux/uinput.h b/include/uapi/linux/uinput.h index 77b8cf73a178..dc652e224b67 100644 --- a/include/uapi/linux/uinput.h +++ b/include/uapi/linux/uinput.h @@ -72,13 +72,12 @@ struct uinput_setup { /** * UI_DEV_SETUP - Set device parameters for setup * - * This ioctl sets parameters for the input device to be created. It must be - * issued *before* calling UI_DEV_CREATE or it will fail. This ioctl supersedes - * the old "struct uinput_user_dev" method, which wrote this data via write(). - * To actually set the absolute axes, you also need to call the ioctl - * UI_ABS_SETUP *before* calling this ioctl. + * This ioctl sets parameters for the input device to be created. It + * supersedes the old "struct uinput_user_dev" method, which wrote this data + * via write(). To actually set the absolute axes UI_ABS_SETUP should be + * used. * - * This ioctl takes a "struct uinput_setup" object as argument. The fields of + * The ioctl takes a "struct uinput_setup" object as argument. The fields of * this object are as follows: * id: See the description of "struct input_id". This field is * copied unchanged into the new device. @@ -87,9 +86,9 @@ struct uinput_setup { * See below for a description of FF with uinput. * * This ioctl can be called multiple times and will overwrite previous values. - * If this ioctl fails with -EINVAL, you're recommended to use the old - * "uinput_user_dev" method via write() as fallback, in case you run on an old - * kernel that does not support this ioctl. + * If this ioctl fails with -EINVAL, it is recommended to use the old + * "uinput_user_dev" method via write() as a fallback, in case you run on an + * old kernel that does not support this ioctl. * * This ioctl may fail with -EINVAL if it is not supported or if you passed * incorrect values, -ENOMEM if the kernel runs out of memory or -EFAULT if the @@ -109,12 +108,10 @@ struct uinput_abs_setup { * UI_ABS_SETUP - Set absolute axis information for the device to setup * * This ioctl sets one absolute axis information for the input device to be - * created. It must be issued *before* calling UI_DEV_SETUP and UI_DEV_CREATE - * for every absolute axis the device exports. - * This ioctl supersedes the old "struct uinput_user_dev" method, which wrote + * created. It supersedes the old "struct uinput_user_dev" method, which wrote * part of this data and the content of UI_DEV_SETUP via write(). * - * This ioctl takes a "struct uinput_abs_setup" object as argument. The fields + * The ioctl takes a "struct uinput_abs_setup" object as argument. The fields * of this object are as follows: * code: The corresponding input code associated with this axis * (ABS_X, ABS_Y, etc...) @@ -124,9 +121,9 @@ struct uinput_abs_setup { * UI_SET_ABSBIT, this ioctl will enable it. * * This ioctl can be called multiple times and will overwrite previous values. - * If this ioctl fails with -EINVAL, you're recommended to use the old - * "uinput_user_dev" method via write() as fallback, in case you run on an old - * kernel that does not support this ioctl. + * If this ioctl fails with -EINVAL, it is recommended to use the old + * "uinput_user_dev" method via write() as a fallback, in case you run on an + * old kernel that does not support this ioctl. * * This ioctl may fail with -EINVAL if it is not supported or if you passed * incorrect values, -ENOMEM if the kernel runs out of memory or -EFAULT if the |