diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-class-led-trigger-netdev')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-led-trigger-netdev | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 646540950e38..ed46b37ab8a2 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -13,6 +13,11 @@ Description: Specifies the duration of the LED blink in milliseconds. Defaults to 50 ms. + When offloaded is true, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + What: /sys/class/leds/<led>/link Date: Dec 2017 KernelVersion: 4.16 @@ -39,6 +44,9 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + What: /sys/class/leds/<led>/rx Date: Dec 2017 KernelVersion: 4.16 @@ -50,3 +58,135 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. + + When offloaded is true, the blink interval is controlled by + hardware and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/offloaded +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are offloaded to + hardware or whether software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED blinking in requested mode is offloaded to + hardware. + +What: /sys/class/leds/<led>/link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10Mbps link speed. + +What: /sys/class/leds/<led>/link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 100Mbps link speed. + +What: /sys/class/leds/<led>/link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 1000Mbps link speed. + +What: /sys/class/leds/<led>/link_2500 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 2500Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 2500Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 2500Mbps link speed. + +What: /sys/class/leds/<led>/link_5000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 5000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 5000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 5000Mbps link speed. + +What: /sys/class/leds/<led>/link_10000 +Date: Nov 2023 +KernelVersion: 6.8 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10000Mbps of the named network device. + Setting this value also immediately changes the LED state. + + Present only if the named network device supports 10000Mbps link speed. + +What: /sys/class/leds/<led>/half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. |