diff options
Diffstat (limited to 'Documentation/ABI/testing')
28 files changed, 1303 insertions, 91 deletions
diff --git a/Documentation/ABI/testing/debugfs-cec-error-inj b/Documentation/ABI/testing/debugfs-cec-error-inj index 4c3596c6d25b..5afcd78fbdb7 100644 --- a/Documentation/ABI/testing/debugfs-cec-error-inj +++ b/Documentation/ABI/testing/debugfs-cec-error-inj @@ -37,4 +37,4 @@ when changes are made. The following CEC error injection implementations exist: -- Documentation/media/uapi/cec/cec-pin-error-inj.rst +- Documentation/userspace-api/media/cec/cec-pin-error-inj.rst diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs index a73601c5121e..f6d9c2a8d528 100644 --- a/Documentation/ABI/testing/debugfs-driver-habanalabs +++ b/Documentation/ABI/testing/debugfs-driver-habanalabs @@ -8,6 +8,16 @@ Description: Sets the device address to be used for read or write through only when the IOMMU is disabled. The acceptable value is a string that starts with "0x" +What: /sys/kernel/debug/habanalabs/hl<n>/clk_gate +Date: May 2020 +KernelVersion: 5.8 +Contact: oded.gabbay@gmail.com +Description: Allow the root user to disable/enable in runtime the clock + gating mechanism in Gaudi. Due to how Gaudi is built, the + clock gating needs to be disabled in order to access the + registers of the TPC and MME engines. This is sometimes needed + during debug by the user and hence the user needs this option + What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers Date: Jan 2019 KernelVersion: 5.1 @@ -150,3 +160,10 @@ KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Displays a list with information about all the active virtual address mappings per ASID + +What: /sys/kernel/debug/habanalabs/hl<n>/stop_on_err +Date: Mar 2020 +KernelVersion: 5.6 +Contact: oded.gabbay@gmail.com +Description: Sets the stop-on_error option for the device engines. Value of + "0" is for disable, otherwise enable. diff --git a/Documentation/ABI/testing/debugfs-hisi-hpre b/Documentation/ABI/testing/debugfs-hisi-hpre index ec4a79e3a807..b4be5f1db4b7 100644 --- a/Documentation/ABI/testing/debugfs-hisi-hpre +++ b/Documentation/ABI/testing/debugfs-hisi-hpre @@ -33,7 +33,7 @@ Contact: linux-crypto@vger.kernel.org Description: Dump debug registers from the HPRE. Only available for PF. -What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/regs Date: Sep 2019 Contact: linux-crypto@vger.kernel.org Description: Dump debug registers from the QM. @@ -44,14 +44,97 @@ What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/current_q Date: Sep 2019 Contact: linux-crypto@vger.kernel.org Description: One QM may contain multiple queues. Select specific queue to - show its debug registers in above qm_regs. + show its debug registers in above regs. Only available for PF. What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/clear_enable Date: Sep 2019 Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(qm_regs) read clear control. 1 means enable +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent + with returning busy. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/send_fail_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but error requests. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/overtime_thrhld +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Set the threshold time for counting the request which is + processed longer than the threshold. + 0: disable(default), 1: 1 microsecond. + Available for both PF and VF, and take no other effect on HPRE. + +What: /sys/kernel/debug/hisi_hpre/<bdf>/hpre_dfx/over_thrhld_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of time out requests. + Available for both PF and VF, and take no other effect on HPRE. diff --git a/Documentation/ABI/testing/debugfs-hisi-sec b/Documentation/ABI/testing/debugfs-hisi-sec index 06adb899495e..85feb4408e0f 100644 --- a/Documentation/ABI/testing/debugfs-hisi-sec +++ b/Documentation/ABI/testing/debugfs-hisi-sec @@ -1,10 +1,4 @@ -What: /sys/kernel/debug/hisi_sec/<bdf>/sec_dfx -Date: Oct 2019 -Contact: linux-crypto@vger.kernel.org -Description: Dump the debug registers of SEC cores. - Only available for PF. - -What: /sys/kernel/debug/hisi_sec/<bdf>/clear_enable +What: /sys/kernel/debug/hisi_sec2/<bdf>/clear_enable Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Enabling/disabling of clear action after reading @@ -12,7 +6,7 @@ Description: Enabling/disabling of clear action after reading 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. -What: /sys/kernel/debug/hisi_sec/<bdf>/current_qm +What: /sys/kernel/debug/hisi_sec2/<bdf>/current_qm Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: One SEC controller has one PF and multiple VFs, each function @@ -20,24 +14,100 @@ Description: One SEC controller has one PF and multiple VFs, each function qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/qm_regs Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Dump of QM related debug registers. Available for PF and VF in host. VF in guest currently only has one debug register. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/current_q +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/current_q Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: One QM of SEC may contain multiple queues. Select specific - queue to show its debug registers in above 'qm_regs'. + queue to show its debug registers in above 'regs'. Only available for PF. -What: /sys/kernel/debug/hisi_sec/<bdf>/qm/clear_enable +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/clear_enable Date: Oct 2019 Contact: linux-crypto@vger.kernel.org Description: Enabling/disabling of clear action after reading the SEC's QM debug registers. 0: disable, 1: enable. Only available for PF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests sent with returning busy. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests + to be received. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/invalid_req_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of invalid requests being received. + Available for both PF and VF, and take no other effect on SEC. + +What: /sys/kernel/debug/hisi_sec2/<bdf>/sec_dfx/done_flag_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of completed but marked error requests + to be received. + Available for both PF and VF, and take no other effect on SEC. diff --git a/Documentation/ABI/testing/debugfs-hisi-zip b/Documentation/ABI/testing/debugfs-hisi-zip index a7c63e6c4bc3..3034a2bf99ca 100644 --- a/Documentation/ABI/testing/debugfs-hisi-zip +++ b/Documentation/ABI/testing/debugfs-hisi-zip @@ -26,7 +26,7 @@ Description: One ZIP controller has one PF and multiple VFs, each function has a QM. Select the QM which below qm refers to. Only available for PF. -What: /sys/kernel/debug/hisi_zip/<bdf>/qm/qm_regs +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/regs Date: Nov 2018 Contact: linux-crypto@vger.kernel.org Description: Dump of QM related debug registers. @@ -37,14 +37,78 @@ What: /sys/kernel/debug/hisi_zip/<bdf>/qm/current_q Date: Nov 2018 Contact: linux-crypto@vger.kernel.org Description: One QM may contain multiple queues. Select specific queue to - show its debug registers in above qm_regs. + show its debug registers in above regs. Only available for PF. What: /sys/kernel/debug/hisi_zip/<bdf>/qm/clear_enable Date: Nov 2018 Contact: linux-crypto@vger.kernel.org -Description: QM debug registers(qm_regs) read clear control. 1 means enable +Description: QM debug registers(regs) read clear control. 1 means enable register read clear, otherwise 0. Writing to this file has no functional effect, only enable or disable counters clear after reading of these registers. Only available for PF. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/err_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of invalid interrupts for + QM task completion. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/aeq_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of QM async event queue interrupts. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/abnormal_irq +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of interrupts for QM abnormal event. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/create_qp_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of queue allocation errors. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/mb_err +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the number of failed QM mailbox commands. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/qm/status +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the status of the QM. + Four states: initiated, started, stopped and closed. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of sent requests. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/recv_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of received requests. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/send_busy_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of requests received + with returning busy. + Available for both PF and VF, and take no other effect on ZIP. + +What: /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx/err_bd_cnt +Date: Apr 2020 +Contact: linux-crypto@vger.kernel.org +Description: Dump the total number of BD type error requests + to be received. + Available for both PF and VF, and take no other effect on ZIP. diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg index f307506eb54c..1e6c28b1942b 100644 --- a/Documentation/ABI/testing/dev-kmsg +++ b/Documentation/ABI/testing/dev-kmsg @@ -56,6 +56,11 @@ Description: The /dev/kmsg character device node provides userspace access seek after the last record available at the time the last SYSLOG_ACTION_CLEAR was issued. + Due to the record nature of this interface with a "read all" + behavior and the specific positions each seek operation sets, + SEEK_CUR is not supported, returning -ESPIPE (invalid seek) to + errno whenever requested. + The output format consists of a prefix carrying the syslog prefix including priority and facility, the 64 bit message sequence number and the monotonic timestamp in microseconds, diff --git a/Documentation/ABI/testing/procfs-smaps_rollup b/Documentation/ABI/testing/procfs-smaps_rollup index 274df44d8b1b..046978193368 100644 --- a/Documentation/ABI/testing/procfs-smaps_rollup +++ b/Documentation/ABI/testing/procfs-smaps_rollup @@ -11,7 +11,7 @@ Description: Additionally, the fields Pss_Anon, Pss_File and Pss_Shmem are not present in /proc/pid/smaps. These fields represent the sum of the Pss field of each type (anon, file, shmem). - For more details, see Documentation/filesystems/proc.txt + For more details, see Documentation/filesystems/proc.rst and the procfs man page. Typical output looks like this: diff --git a/Documentation/ABI/testing/sysfs-block-rnbd b/Documentation/ABI/testing/sysfs-block-rnbd new file mode 100644 index 000000000000..8f070b47f361 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-rnbd @@ -0,0 +1,46 @@ +What: /sys/block/rnbd<N>/rnbd/unmap_device +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: To unmap a volume, "normal" or "force" has to be written to: + /sys/block/rnbd<N>/rnbd/unmap_device + + When "normal" is used, the operation will fail with EBUSY if any process + is using the device. When "force" is used, the device is also unmapped + when device is in use. All I/Os that are in progress will fail. + + Example: + + # echo "normal" > /sys/block/rnbd0/rnbd/unmap_device + +What: /sys/block/rnbd<N>/rnbd/state +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: The file contains the current state of the block device. The state file + returns "open" when the device is successfully mapped from the server + and accepting I/O requests. When the connection to the server gets + disconnected in case of an error (e.g. link failure), the state file + returns "closed" and all I/O requests submitted to it will fail with -EIO. + +What: /sys/block/rnbd<N>/rnbd/session +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RNBD uses RTRS session to transport the data between client and + server. The entry "session" contains the name of the session, that + was used to establish the RTRS session. It's the same name that + was passed as server parameter to the map_device entry. + +What: /sys/block/rnbd<N>/rnbd/mapping_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the path that was passed as "device_path" to the map_device + operation. + +What: /sys/block/rnbd<N>/rnbd/access_mode +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the device access mode: ro, rw or migration. diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme new file mode 100644 index 000000000000..c9278a3b3df1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-dfl_fme @@ -0,0 +1,104 @@ +What: /sys/bus/event_source/devices/dfl_fmeX/format +Date: April 2020 +KernelVersion: 5.8 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Attribute group to describe the magic bits + that go into perf_event_attr.config for a particular pmu. + (See ABI/testing/sysfs-bus-event_source-devices-format). + + Each attribute under this group defines a bit range of the + perf_event_attr.config. All supported attributes are listed + below. + + event = "config:0-11" - event ID + evtype = "config:12-15" - event type + portid = "config:16-23" - event source + + For example, + + fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff" + + It shows this fab_mmio_read is a fabric type (0x02) event with + 0x06 local event id for overall monitoring (portid=0xff). + +What: /sys/bus/event_source/devices/dfl_fmeX/cpumask +Date: April 2020 +KernelVersion: 5.8 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. This file always returns cpu which the PMU is bound + for access to all fme pmu performance monitoring events. + +What: /sys/bus/event_source/devices/dfl_fmeX/events +Date: April 2020 +KernelVersion: 5.8 +Contact: Wu Hao <hao.wu@intel.com> +Description: Read-only. Attribute group to describe performance monitoring + events specific to fme. Each attribute in this group describes + a single performance monitoring event supported by this fme pmu. + The name of the file is the name of the event. + (See ABI/testing/sysfs-bus-event_source-devices-events). + + All supported performance monitoring events are listed below. + + Basic events (evtype=0x00) + + clock = "event=0x00,evtype=0x00,portid=0xff" + + Cache events (evtype=0x01) + + cache_read_hit = "event=0x00,evtype=0x01,portid=0xff" + cache_read_miss = "event=0x01,evtype=0x01,portid=0xff" + cache_write_hit = "event=0x02,evtype=0x01,portid=0xff" + cache_write_miss = "event=0x03,evtype=0x01,portid=0xff" + cache_hold_request = "event=0x05,evtype=0x01,portid=0xff" + cache_data_write_port_contention = + "event=0x06,evtype=0x01,portid=0xff" + cache_tag_write_port_contention = + "event=0x07,evtype=0x01,portid=0xff" + cache_tx_req_stall = "event=0x08,evtype=0x01,portid=0xff" + cache_rx_req_stall = "event=0x09,evtype=0x01,portid=0xff" + cache_eviction = "event=0x0a,evtype=0x01,portid=0xff" + + Fabric events (evtype=0x02) + + fab_pcie0_read = "event=0x00,evtype=0x02,portid=0xff" + fab_pcie0_write = "event=0x01,evtype=0x02,portid=0xff" + fab_pcie1_read = "event=0x02,evtype=0x02,portid=0xff" + fab_pcie1_write = "event=0x03,evtype=0x02,portid=0xff" + fab_upi_read = "event=0x04,evtype=0x02,portid=0xff" + fab_upi_write = "event=0x05,evtype=0x02,portid=0xff" + fab_mmio_read = "event=0x06,evtype=0x02,portid=0xff" + fab_mmio_write = "event=0x07,evtype=0x02,portid=0xff" + fab_port_pcie0_read = "event=0x00,evtype=0x02,portid=?" + fab_port_pcie0_write = "event=0x01,evtype=0x02,portid=?" + fab_port_pcie1_read = "event=0x02,evtype=0x02,portid=?" + fab_port_pcie1_write = "event=0x03,evtype=0x02,portid=?" + fab_port_upi_read = "event=0x04,evtype=0x02,portid=?" + fab_port_upi_write = "event=0x05,evtype=0x02,portid=?" + fab_port_mmio_read = "event=0x06,evtype=0x02,portid=?" + fab_port_mmio_write = "event=0x07,evtype=0x02,portid=?" + + VTD events (evtype=0x03) + + vtd_port_read_transaction = "event=0x00,evtype=0x03,portid=?" + vtd_port_write_transaction = "event=0x01,evtype=0x03,portid=?" + vtd_port_devtlb_read_hit = "event=0x02,evtype=0x03,portid=?" + vtd_port_devtlb_write_hit = "event=0x03,evtype=0x03,portid=?" + vtd_port_devtlb_4k_fill = "event=0x04,evtype=0x03,portid=?" + vtd_port_devtlb_2m_fill = "event=0x05,evtype=0x03,portid=?" + vtd_port_devtlb_1g_fill = "event=0x06,evtype=0x03,portid=?" + + VTD SIP events (evtype=0x04) + + vtd_sip_iotlb_4k_hit = "event=0x00,evtype=0x04,portid=0xff" + vtd_sip_iotlb_2m_hit = "event=0x01,evtype=0x04,portid=0xff" + vtd_sip_iotlb_1g_hit = "event=0x02,evtype=0x04,portid=0xff" + vtd_sip_slpwc_l3_hit = "event=0x03,evtype=0x04,portid=0xff" + vtd_sip_slpwc_l4_hit = "event=0x04,evtype=0x04,portid=0xff" + vtd_sip_rcc_hit = "event=0x05,evtype=0x04,portid=0xff" + vtd_sip_iotlb_4k_miss = "event=0x06,evtype=0x04,portid=0xff" + vtd_sip_iotlb_2m_miss = "event=0x07,evtype=0x04,portid=0xff" + vtd_sip_iotlb_1g_miss = "event=0x08,evtype=0x04,portid=0xff" + vtd_sip_slpwc_l3_miss = "event=0x09,evtype=0x04,portid=0xff" + vtd_sip_slpwc_l4_miss = "event=0x0a,evtype=0x04,portid=0xff" + vtd_sip_rcc_miss = "event=0x0b,evtype=0x04,portid=0xff" diff --git a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 index ec27c6c9e737..e8698afcd952 100644 --- a/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +++ b/Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 @@ -22,6 +22,27 @@ Description: Exposes the "version" field of the 24x7 catalog. This is also extractable from the provided binary "catalog" sysfs entry. +What: /sys/devices/hv_24x7/interface/sockets +Date: May 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: read only + This sysfs interface exposes the number of sockets present in the + system. + +What: /sys/devices/hv_24x7/interface/chipspersocket +Date: May 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: read only + This sysfs interface exposes the number of chips per socket + present in the system. + +What: /sys/devices/hv_24x7/interface/coresperchip +Date: May 2020 +Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> +Description: read only + This sysfs interface exposes the number of cores per chip + present in the system. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name> Date: February 2014 Contact: Linux on PowerPC Developer List <linuxppc-dev@lists.ozlabs.org> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity new file mode 100644 index 000000000000..2172f3bb9c64 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity @@ -0,0 +1,10 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel +Date: March 2020 +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Near level for proximity sensors. This is a single integer + value that tells user space when an object should be + considered close to the device. If the value read from the + sensor is above or equal to the value in this file an object + should typically be considered near. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310 new file mode 100644 index 000000000000..3ac7759013e5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310 @@ -0,0 +1,10 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw +Date: February 2019 +KernelVersion: 5.6 +Contact: Daniel Campello <campello@chromium.org> +Description: + Proximity measurement indicating that some object is + near the combined sensor. The combined sensor presents + proximity measurements constructed by hardware by + combining measurements taken from a given set of + physical sensors. diff --git a/Documentation/ABI/testing/sysfs-bus-most b/Documentation/ABI/testing/sysfs-bus-most index 6b1d06e3285e..ec0a603d804b 100644 --- a/Documentation/ABI/testing/sysfs-bus-most +++ b/Documentation/ABI/testing/sysfs-bus-most @@ -1,14 +1,14 @@ -What: /sys/bus/most/devices/.../description +What: /sys/bus/most/devices/<dev>/description Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Provides information about the interface type and the physical - location of the device. Hardware attached via USB, for instance, + Provides information about the physical location of the + device. Hardware attached via USB, for instance, might return <1-1.1:1.0> Users: -What: /sys/bus/most/devices/.../interface +What: /sys/bus/most/devices/<dev>/interface Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -16,7 +16,7 @@ Description: Indicates the type of peripheral interface the device uses. Users: -What: /sys/bus/most/devices/.../dci +What: /sys/bus/most/devices/<dev>/dci Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -26,7 +26,7 @@ Description: write the controller's DCI registers. Users: -What: /sys/bus/most/devices/.../dci/arb_address +What: /sys/bus/most/devices/<dev>/dci/arb_address Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -35,7 +35,7 @@ Description: application wants to read from or write to. Users: -What: /sys/bus/most/devices/.../dci/arb_value +What: /sys/bus/most/devices/<dev>/dci/arb_value Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -44,7 +44,7 @@ Description: is stored in arb_address. Users: -What: /sys/bus/most/devices/.../dci/mep_eui48_hi +What: /sys/bus/most/devices/<dev>/dci/mep_eui48_hi Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -52,7 +52,7 @@ Description: This is used to check and configure the MAC address. Users: -What: /sys/bus/most/devices/.../dci/mep_eui48_lo +What: /sys/bus/most/devices/<dev>/dci/mep_eui48_lo Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -60,7 +60,7 @@ Description: This is used to check and configure the MAC address. Users: -What: /sys/bus/most/devices/.../dci/mep_eui48_mi +What: /sys/bus/most/devices/<dev>/dci/mep_eui48_mi Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -68,7 +68,7 @@ Description: This is used to check and configure the MAC address. Users: -What: /sys/bus/most/devices/.../dci/mep_filter +What: /sys/bus/most/devices/<dev>/dci/mep_filter Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -76,7 +76,7 @@ Description: This is used to check and configure the MEP filter address. Users: -What: /sys/bus/most/devices/.../dci/mep_hash0 +What: /sys/bus/most/devices/<dev>/dci/mep_hash0 Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -84,7 +84,7 @@ Description: This is used to check and configure the MEP hash table. Users: -What: /sys/bus/most/devices/.../dci/mep_hash1 +What: /sys/bus/most/devices/<dev>/dci/mep_hash1 Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -92,7 +92,7 @@ Description: This is used to check and configure the MEP hash table. Users: -What: /sys/bus/most/devices/.../dci/mep_hash2 +What: /sys/bus/most/devices/<dev>/dci/mep_hash2 Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -100,7 +100,7 @@ Description: This is used to check and configure the MEP hash table. Users: -What: /sys/bus/most/devices/.../dci/mep_hash3 +What: /sys/bus/most/devices/<dev>/dci/mep_hash3 Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -108,7 +108,7 @@ Description: This is used to check and configure the MEP hash table. Users: -What: /sys/bus/most/devices/.../dci/ni_state +What: /sys/bus/most/devices/<dev>/dci/ni_state Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -116,7 +116,7 @@ Description: Indicates the current network interface state. Users: -What: /sys/bus/most/devices/.../dci/node_address +What: /sys/bus/most/devices/<dev>/dci/node_address Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -124,7 +124,7 @@ Description: Indicates the current node address. Users: -What: /sys/bus/most/devices/.../dci/node_position +What: /sys/bus/most/devices/<dev>/dci/node_position Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -132,7 +132,7 @@ Description: Indicates the current node position. Users: -What: /sys/bus/most/devices/.../dci/packet_bandwidth +What: /sys/bus/most/devices/<dev>/dci/packet_bandwidth Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -140,7 +140,7 @@ Description: Indicates the configured packet bandwidth. Users: -What: /sys/bus/most/devices/.../dci/sync_ep +What: /sys/bus/most/devices/<dev>/dci/sync_ep Date: June 2016 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -149,7 +149,7 @@ Description: endpoint. Users: -What: /sys/bus/most/devices/.../<channel>/ +What: /sys/bus/most/devices/<dev>/<channel>/ Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> @@ -160,91 +160,92 @@ Description: configure it. Users: -What: /sys/bus/most/devices/.../<channel>/available_datatypes +What: /sys/bus/most/devices/<dev>/<channel>/available_datatypes Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the data types the current channel can transport. + Indicates the data types the channel can transport. Users: -What: /sys/bus/most/devices/.../<channel>/available_directions +What: /sys/bus/most/devices/<dev>/<channel>/available_directions Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the directions the current channel is capable of. + Indicates the directions the channel is capable of. Users: -What: /sys/bus/most/devices/.../<channel>/number_of_packet_buffers +What: /sys/bus/most/devices/<dev>/<channel>/number_of_packet_buffers Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the number of packet buffers the current channel can + Indicates the number of packet buffers the channel can handle. Users: -What: /sys/bus/most/devices/.../<channel>/number_of_stream_buffers +What: /sys/bus/most/devices/<dev>/<channel>/number_of_stream_buffers Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the number of streaming buffers the current channel can + Indicates the number of streaming buffers the channel can handle. Users: -What: /sys/bus/most/devices/.../<channel>/size_of_packet_buffer +What: /sys/bus/most/devices/<dev>/<channel>/size_of_packet_buffer Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the size of a packet buffer the current channel can + Indicates the size of a packet buffer the channel can handle. Users: -What: /sys/bus/most/devices/.../<channel>/size_of_stream_buffer +What: /sys/bus/most/devices/<dev>/<channel>/size_of_stream_buffer Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates the size of a streaming buffer the current channel can + Indicates the size of a streaming buffer the channel can handle. Users: -What: /sys/bus/most/devices/.../<channel>/set_number_of_buffers +What: /sys/bus/most/devices/<dev>/<channel>/set_number_of_buffers Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the number of buffers of the current channel. + This is to read back the configured number of buffers of + the channel. Users: -What: /sys/bus/most/devices/.../<channel>/set_buffer_size +What: /sys/bus/most/devices/<dev>/<channel>/set_buffer_size Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the size of a buffer of the current channel. + This is to read back the configured buffer size of the channel. Users: -What: /sys/bus/most/devices/.../<channel>/set_direction +What: /sys/bus/most/devices/<dev>/<channel>/set_direction Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the direction of the current channel. + This is to read back the configured direction of the channel. The following strings will be accepted: - 'dir_tx', - 'dir_rx' + 'tx', + 'rx' Users: -What: /sys/bus/most/devices/.../<channel>/set_datatype +What: /sys/bus/most/devices/<dev>/<channel>/set_datatype Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the data type of the current channel. + This is to read back the configured data type of the channel. The following strings will be accepted: 'control', 'async', @@ -252,30 +253,31 @@ Description: 'isoc_avp' Users: -What: /sys/bus/most/devices/.../<channel>/set_subbuffer_size +What: /sys/bus/most/devices/<dev>/<channel>/set_subbuffer_size Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the subbuffer size of the current channel. + This is to read back the configured subbuffer size of + the channel. Users: -What: /sys/bus/most/devices/.../<channel>/set_packets_per_xact +What: /sys/bus/most/devices/<dev>/<channel>/set_packets_per_xact Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - This is to configure the number of packets per transaction of - the current channel. This is only needed network interface - controller is attached via USB. + This is to read back the configured number of packets per + transaction of the channel. This is only applicable when + connected via USB. Users: -What: /sys/bus/most/devices/.../<channel>/channel_starving +What: /sys/bus/most/devices/<dev>/<channel>/channel_starving Date: March 2017 KernelVersion: 4.15 Contact: Christian Gromm <christian.gromm@microchip.com> Description: - Indicates whether current channel ran out of buffers. + Indicates whether channel ran out of buffers. Users: What: /sys/bus/most/drivers/most_core/components diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-master b/Documentation/ABI/testing/sysfs-bus-soundwire-master new file mode 100644 index 000000000000..46ef038d8722 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-soundwire-master @@ -0,0 +1,23 @@ +What: /sys/bus/soundwire/devices/sdw-master-N/revision + /sys/bus/soundwire/devices/sdw-master-N/clk_stop_modes + /sys/bus/soundwire/devices/sdw-master-N/clk_freq + /sys/bus/soundwire/devices/sdw-master-N/clk_gears + /sys/bus/soundwire/devices/sdw-master-N/default_col + /sys/bus/soundwire/devices/sdw-master-N/default_frame_rate + /sys/bus/soundwire/devices/sdw-master-N/default_row + /sys/bus/soundwire/devices/sdw-master-N/dynamic_shape + /sys/bus/soundwire/devices/sdw-master-N/err_threshold + /sys/bus/soundwire/devices/sdw-master-N/max_clk_freq + +Date: April 2020 + +Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> + Bard Liao <yung-chuan.liao@linux.intel.com> + Vinod Koul <vkoul@kernel.org> + +Description: SoundWire Master-N DisCo properties. + These properties are defined by MIPI DisCo Specification + for SoundWire. They define various properties of the Master + and are used by the bus to configure the Master. clk_stop_modes + is a bitmask for simplifications and combines the + clock-stop-mode0 and clock-stop-mode1 properties. diff --git a/Documentation/ABI/testing/sysfs-bus-soundwire-slave b/Documentation/ABI/testing/sysfs-bus-soundwire-slave new file mode 100644 index 000000000000..db4c9511d1aa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-soundwire-slave @@ -0,0 +1,91 @@ +What: /sys/bus/soundwire/devices/sdw:.../dev-properties/mipi_revision + /sys/bus/soundwire/devices/sdw:.../dev-properties/wake_capable + /sys/bus/soundwire/devices/sdw:.../dev-properties/test_mode_capable + /sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_mode1 + /sys/bus/soundwire/devices/sdw:.../dev-properties/simple_clk_stop_capable + /sys/bus/soundwire/devices/sdw:.../dev-properties/clk_stop_timeout + /sys/bus/soundwire/devices/sdw:.../dev-properties/ch_prep_timeout + /sys/bus/soundwire/devices/sdw:.../dev-properties/reset_behave + /sys/bus/soundwire/devices/sdw:.../dev-properties/high_PHY_capable + /sys/bus/soundwire/devices/sdw:.../dev-properties/paging_support + /sys/bus/soundwire/devices/sdw:.../dev-properties/bank_delay_support + /sys/bus/soundwire/devices/sdw:.../dev-properties/p15_behave + /sys/bus/soundwire/devices/sdw:.../dev-properties/master_count + /sys/bus/soundwire/devices/sdw:.../dev-properties/source_ports + /sys/bus/soundwire/devices/sdw:.../dev-properties/sink_ports + +Date: May 2020 + +Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> + Bard Liao <yung-chuan.liao@linux.intel.com> + Vinod Koul <vkoul@kernel.org> + +Description: SoundWire Slave DisCo properties. + These properties are defined by MIPI DisCo Specification + for SoundWire. They define various properties of the + SoundWire Slave and are used by the bus to configure + the Slave + + +What: /sys/bus/soundwire/devices/sdw:.../dp0/max_word + /sys/bus/soundwire/devices/sdw:.../dp0/min_word + /sys/bus/soundwire/devices/sdw:.../dp0/words + /sys/bus/soundwire/devices/sdw:.../dp0/BRA_flow_controlled + /sys/bus/soundwire/devices/sdw:.../dp0/simple_ch_prep_sm + /sys/bus/soundwire/devices/sdw:.../dp0/imp_def_interrupts + +Date: May 2020 + +Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> + Bard Liao <yung-chuan.liao@linux.intel.com> + Vinod Koul <vkoul@kernel.org> + +Description: SoundWire Slave Data Port-0 DisCo properties. + These properties are defined by MIPI DisCo Specification + for the SoundWire. They define various properties of the + Data port 0 are used by the bus to configure the Data Port 0. + + +What: /sys/bus/soundwire/devices/sdw:.../dpN_src/max_word + /sys/bus/soundwire/devices/sdw:.../dpN_src/min_word + /sys/bus/soundwire/devices/sdw:.../dpN_src/words + /sys/bus/soundwire/devices/sdw:.../dpN_src/type + /sys/bus/soundwire/devices/sdw:.../dpN_src/max_grouping + /sys/bus/soundwire/devices/sdw:.../dpN_src/simple_ch_prep_sm + /sys/bus/soundwire/devices/sdw:.../dpN_src/ch_prep_timeout + /sys/bus/soundwire/devices/sdw:.../dpN_src/imp_def_interrupts + /sys/bus/soundwire/devices/sdw:.../dpN_src/min_ch + /sys/bus/soundwire/devices/sdw:.../dpN_src/max_ch + /sys/bus/soundwire/devices/sdw:.../dpN_src/channels + /sys/bus/soundwire/devices/sdw:.../dpN_src/ch_combinations + /sys/bus/soundwire/devices/sdw:.../dpN_src/max_async_buffer + /sys/bus/soundwire/devices/sdw:.../dpN_src/block_pack_mode + /sys/bus/soundwire/devices/sdw:.../dpN_src/port_encoding + + /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_word + /sys/bus/soundwire/devices/sdw:.../dpN_sink/min_word + /sys/bus/soundwire/devices/sdw:.../dpN_sink/words + /sys/bus/soundwire/devices/sdw:.../dpN_sink/type + /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_grouping + /sys/bus/soundwire/devices/sdw:.../dpN_sink/simple_ch_prep_sm + /sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_prep_timeout + /sys/bus/soundwire/devices/sdw:.../dpN_sink/imp_def_interrupts + /sys/bus/soundwire/devices/sdw:.../dpN_sink/min_ch + /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_ch + /sys/bus/soundwire/devices/sdw:.../dpN_sink/channels + /sys/bus/soundwire/devices/sdw:.../dpN_sink/ch_combinations + /sys/bus/soundwire/devices/sdw:.../dpN_sink/max_async_buffer + /sys/bus/soundwire/devices/sdw:.../dpN_sink/block_pack_mode + /sys/bus/soundwire/devices/sdw:.../dpN_sink/port_encoding + +Date: May 2020 + +Contact: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> + Bard Liao <yung-chuan.liao@linux.intel.com> + Vinod Koul <vkoul@kernel.org> + +Description: SoundWire Slave Data Source/Sink Port-N DisCo properties. + These properties are defined by MIPI DisCo Specification + for SoundWire. They define various properties of the + Source/Sink Data port N and are used by the bus to configure + the Data Port N. diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index 664a8f6a634f..3b404577f380 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -124,6 +124,19 @@ Description: authentication is performed (e.g: 802.1x). 'link_mode' attribute will also reflect the dormant state. +What: /sys/class/net/<iface>/testing +Date: April 2002 +KernelVersion: 5.8 +Contact: netdev@vger.kernel.org +Description: + Indicates whether the interface is under test. Possible + values are: + 0: interface is not being tested + 1: interface is being tested + + When an interface is under test, it cannot be expected + to pass packets as normal. + What: /sys/clas/net/<iface>/duplex Date: October 2009 KernelVersion: 2.6.33 diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power index bf3b48f022dc..216d61a22f1e 100644 --- a/Documentation/ABI/testing/sysfs-class-power +++ b/Documentation/ABI/testing/sysfs-class-power @@ -74,6 +74,21 @@ Description: Access: Read, Write Valid values: 0 - 100 (percent) +What: /sys/class/power_supply/<supply_name>/capacity_error_margin +Date: April 2019 +Contact: linux-pm@vger.kernel.org +Description: + Battery capacity measurement becomes unreliable without + recalibration. This values provides the maximum error + margin expected to exist by the fuel gauge in percent. + Values close to 0% will be returned after (re-)calibration + has happened. Over time the error margin will increase. + 100% means, that the capacity related values are basically + completely useless. + + Access: Read + Valid values: 0 - 100 (percent) + What: /sys/class/power_supply/<supply_name>/capacity_level Date: June 2009 Contact: linux-pm@vger.kernel.org @@ -190,7 +205,7 @@ Description: Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", "Safety timer expire", - "Over current" + "Over current", "Calibration required" What: /sys/class/power_supply/<supply_name>/precharge_current Date: June 2017 @@ -665,3 +680,31 @@ Description: Valid values: - 1: enabled - 0: disabled + +What: /sys/class/power_supply/<supply_name>/manufacture_year +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the year (following Gregorian calendar) when the device has been + manufactured. + + Access: Read + Valid values: Reported as integer + +What: /sys/class/power_supply/<supply_name>/manufacture_month +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the month when the device has been manufactured. + + Access: Read + Valid values: 1-12 + +What: /sys/class/power_supply/<supply_name>/manufacture_day +Date: January 2020 +Contact: linux-pm@vger.kernel.org +Description: + Reports the day of month when the device has been manufactured. + + Access: Read + Valid values: 1-31 diff --git a/Documentation/ABI/testing/sysfs-class-power-mp2629 b/Documentation/ABI/testing/sysfs-class-power-mp2629 new file mode 100644 index 000000000000..327a07e22805 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-mp2629 @@ -0,0 +1,8 @@ +What: /sys/class/power_supply/mp2629_battery/batt_impedance_compen +Date: April 2020 +KernelVersion: 5.7 +Description: + Represents a battery impedance compensation to accelerate charging. + + Access: Read, Write + Valid values: Represented in milli-ohms. Valid range is [0, 140]. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-client b/Documentation/ABI/testing/sysfs-class-rnbd-client new file mode 100644 index 000000000000..c084f203b41e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-client @@ -0,0 +1,111 @@ +What: /sys/class/rnbd-client +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Provide information about RNBD-client. + All sysfs files that are not read-only provide the usage information on read: + + Example: + # cat /sys/class/rnbd-client/ctl/map_device + + > Usage: echo "sessname=<name of the rtrs session> path=<[srcaddr,]dstaddr> + > [path=<[srcaddr,]dstaddr>] device_path=<full path on remote side> + > [access_mode=<ro|rw|migration>] > map_device + > + > addr ::= [ ip:<ipv4> | ip:<ipv6> | gid:<gid> ] + +What: /sys/class/rnbd-client/ctl/map_device +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Expected format is the following: + + sessname=<name of the rtrs session> + path=<[srcaddr,]dstaddr> [path=<[srcaddr,]dstaddr> ...] + device_path=<full path on remote side> + [access_mode=<ro|rw|migration>] + + Where: + + sessname: accepts a string not bigger than 256 chars, which identifies + a given session on the client and on the server. + I.e. "clt_hostname-srv_hostname" could be a natural choice. + + path: describes a connection between the client and the server by + specifying destination and, when required, the source address. + The addresses are to be provided in the following format: + + ip:<IPv6> + ip:<IPv4> + gid:<GID> + + for example: + + path=ip:10.0.0.66 + The single addr is treated as the destination. + The connection will be established to this server from any client IP address. + + path=ip:10.0.0.66,ip:10.0.1.66 + First addr is the source address and the second is the destination. + + If multiple "path=" options are specified multiple connection + will be established and data will be sent according to + the selected multipath policy (see RTRS mp_policy sysfs entry description). + + device_path: Path to the block device on the server side. Path is specified + relative to the directory on server side configured in the + 'dev_search_path' module parameter of the rnbd_server. + The rnbd_server prepends the <device_path> received from client + with <dev_search_path> and tries to open the + <dev_search_path>/<device_path> block device. On success, + a /dev/rnbd<N> device file, a /sys/block/rnbd_client/rnbd<N>/ + directory and an entry in /sys/class/rnbd-client/ctl/devices + will be created. + + If 'dev_search_path' contains '%SESSNAME%', then each session can + have different devices namespace, e.g. server was configured with + the following parameter "dev_search_path=/run/rnbd-devs/%SESSNAME%", + client has this string "sessname=blya device_path=sda", then server + will try to open: /run/rnbd-devs/blya/sda. + + access_mode: the access_mode parameter specifies if the device is to be + mapped as "ro" read-only or "rw" read-write. The server allows + a device to be exported in rw mode only once. The "migration" + access mode has to be specified if a second mapping in read-write + mode is desired. + + By default "rw" is used. + + Exit Codes: + + If the device is already mapped it will fail with EEXIST. If the input + has an invalid format it will return EINVAL. If the device path cannot + be found on the server, it will fail with ENOENT. + + Finding device file after mapping + --------------------------------- + + After mapping, the device file can be found by: + o The symlink /sys/class/rnbd-client/ctl/devices/<device_id> + points to /sys/block/<dev-name>. The last part of the symlink destination + is the same as the device name. By extracting the last part of the + path the path to the device /dev/<dev-name> can be build. + + o /dev/block/$(cat /sys/class/rnbd-client/ctl/devices/<device_id>/dev) + + How to find the <device_id> of the device is described on the next + section. + +What: /sys/class/rnbd-client/ctl/devices/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: For each device mapped on the client a new symbolic link is created as + /sys/class/rnbd-client/ctl/devices/<device_id>, which points + to the block device created by rnbd (/sys/block/rnbd<N>/). + The <device_id> of each device is created as follows: + + - If the 'device_path' provided during mapping contains slashes ("/"), + they are replaced by exclamation mark ("!") and used as as the + <device_id>. Otherwise, the <device_id> will be the same as the + "device_path" provided. diff --git a/Documentation/ABI/testing/sysfs-class-rnbd-server b/Documentation/ABI/testing/sysfs-class-rnbd-server new file mode 100644 index 000000000000..ba60a90c0e45 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rnbd-server @@ -0,0 +1,50 @@ +What: /sys/class/rnbd-server +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: provide information about RNBD-server. + +What: /sys/class/rnbd-server/ctl/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a client maps a device, a directory entry with the name of the + block device is created under /sys/class/rnbd-server/ctl/devices/. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/block_dev +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Is a symlink to the sysfs entry of the exported device. + + Example: + block_dev -> ../../../../class/block/ram0 + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: For each client a particular device is exported to, following directory will be + created: + + /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/ + + When the device is unmapped by that client, the directory will be removed. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/read_only +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains '1' if device is mapped read-only, otherwise '0'. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/mapping_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the relative device path provided by the user during mapping. + +What: /sys/class/rnbd-server/ctl/devices/<device_name>/sessions/<session-name>/access_mode +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains the device access mode: ro, rw or migration. diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-client b/Documentation/ABI/testing/sysfs-class-rtrs-client new file mode 100644 index 000000000000..e7e718db8941 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtrs-client @@ -0,0 +1,131 @@ +What: /sys/class/rtrs-client +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a user of RTRS API creates a new session, a directory entry with + the name of that session is created under /sys/class/rtrs-client/<session-name>/ + +What: /sys/class/rtrs-client/<session-name>/add_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RW, adds a new path (connection) to an existing session. Expected format is the + following: + + <[source addr,]destination addr> + *addr ::= [ ip:<ipv4|ipv6> | gid:<gid> ] + +What: /sys/class/rtrs-client/<session-name>/max_reconnect_attempts +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Maximum number reconnect attempts the client should make before giving up + after connection breaks unexpectedly. + +What: /sys/class/rtrs-client/<session-name>/mp_policy +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Multipath policy specifies which path should be selected on each IO: + + round-robin (0): + select path in per CPU round-robin manner. + + min-inflight (1): + select path with minimum inflights. + +What: /sys/class/rtrs-client/<session-name>/paths/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Each path belonging to a given session is listed here by its source and + destination address. When a new path is added to a session by writing to + the "add_path" entry, a directory <src@dst> is created. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/state +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains "connected" if the session is connected to the peer and fully + functional. Otherwise the file contains "disconnected" + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/reconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to reconnect the path. + Operation is blocking and returns 0 if reconnect was successful. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/disconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to disconnect the path. + Operation blocks until RTRS path is disconnected. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/remove_path +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Write "1" to the file in order to disconnected and remove the path + from the session. Operation blocks until the path is disconnected + and removed from the session. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_name +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the the name of HCA the connection established on. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/hca_port +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the port number of active port traffic is going through. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/src_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the source address of the path + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/dst_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the destination address of the path + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reset_all +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RW, Read will return usage help, write 0 will clear all the statistics. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/cpu_migration +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RTRS expects that each HCA IRQ is pinned to a separate CPU. If it's + not the case, the processing of an I/O response could be processed on a + different CPU than where it was originally submitted. This file shows + how many interrupts where generated on a non expected CPU. + "from:" is the CPU on which the IRQ was expected, but not generated. + "to:" is the CPU on which the IRQ was generated, but not expected. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/reconnects +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains 2 unsigned int values, the first one records number of successful + reconnects in the path lifetime, the second one records number of failed + reconnects in the path lifetime. + +What: /sys/class/rtrs-client/<session-name>/paths/<src@dst>/stats/rdma +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains statistics regarding rdma operations and inflight operations. + The output consists of 6 values: + + <read-count> <read-total-size> <write-count> <write-total-size> \ + <inflights> <failovered> diff --git a/Documentation/ABI/testing/sysfs-class-rtrs-server b/Documentation/ABI/testing/sysfs-class-rtrs-server new file mode 100644 index 000000000000..3b6d5b067df0 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-rtrs-server @@ -0,0 +1,53 @@ +What: /sys/class/rtrs-server +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When a user of RTRS API creates a new session on a client side, a + directory entry with the name of that session is created in here. + +What: /sys/class/rtrs-server/<session-name>/paths/ +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When new path is created by writing to "add_path" entry on client side, + a directory entry named as <source address>@<destination address> is created + on server. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/disconnect +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: When "1" is written to the file, the RTRS session is being disconnected. + Operations is non-blocking and returns control immediately to the caller. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_name +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the the name of HCA the connection established on. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/hca_port +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the port number of active port traffic is going through. + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/src_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the source address of the path + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/dst_addr +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: RO, Contains the destination address of the path + +What: /sys/class/rtrs-server/<session-name>/paths/<src@dst>/stats/rdma +Date: Feb 2020 +KernelVersion: 5.7 +Contact: Jack Wang <jinpu.wang@cloud.ionos.com> Danil Kipnis <danil.kipnis@cloud.ionos.com> +Description: Contains statistics regarding rdma operations and inflight operations. + The output consists of 5 values: + <read-count> <read-total-size> <write-count> <write-total-size> <inflights> diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2e0e3b45d02a..b555df825447 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -106,10 +106,10 @@ Description: CPU topology files that describe a logical CPU's relationship See Documentation/admin-guide/cputopology.rst for more information. -What: /sys/devices/system/cpu/cpuidle/current_driver - /sys/devices/system/cpu/cpuidle/current_governer_ro - /sys/devices/system/cpu/cpuidle/available_governors +What: /sys/devices/system/cpu/cpuidle/available_governors + /sys/devices/system/cpu/cpuidle/current_driver /sys/devices/system/cpu/cpuidle/current_governor + /sys/devices/system/cpu/cpuidle/current_governer_ro Date: September 2007 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: Discover cpuidle policy and mechanism @@ -119,24 +119,18 @@ Description: Discover cpuidle policy and mechanism consumption during idle. Idle policy (governor) is differentiated from idle mechanism - (driver) - - current_driver: (RO) displays current idle mechanism - - current_governor_ro: (RO) displays current idle policy - - With the cpuidle_sysfs_switch boot option enabled (meant for - developer testing), the following three attributes are visible - instead: - - current_driver: same as described above + (driver). available_governors: (RO) displays a space separated list of - available governors + available governors. + + current_driver: (RO) displays current idle mechanism. current_governor: (RW) displays current idle policy. Users can switch the governor at runtime by writing to this file. + current_governor_ro: (RO) displays current idle policy. + See Documentation/admin-guide/pm/cpuidle.rst and Documentation/driver-api/pm/cpuidle.rst for more information. @@ -492,6 +486,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/spec_store_bypass /sys/devices/system/cpu/vulnerabilities/l1tf /sys/devices/system/cpu/vulnerabilities/mds + /sys/devices/system/cpu/vulnerabilities/srbds /sys/devices/system/cpu/vulnerabilities/tsx_async_abort /sys/devices/system/cpu/vulnerabilities/itlb_multihit Date: January 2018 @@ -580,3 +575,42 @@ Description: Secure Virtual Machine If 1, it means the system is using the Protected Execution Facility in POWER9 and newer processors. i.e., it is a Secure Virtual Machine. + +What: /sys/devices/system/cpu/cpuX/purr +Date: Apr 2005 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: PURR ticks for this CPU since the system boot. + + The Processor Utilization Resources Register (PURR) is + a 64-bit counter which provides an estimate of the + resources used by the CPU thread. The contents of this + register increases monotonically. This sysfs interface + exposes the number of PURR ticks for cpuX. + +What: /sys/devices/system/cpu/cpuX/spurr +Date: Dec 2006 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: SPURR ticks for this CPU since the system boot. + + The Scaled Processor Utilization Resources Register + (SPURR) is a 64-bit counter that provides a frequency + invariant estimate of the resources used by the CPU + thread. The contents of this register increases + monotonically. This sysfs interface exposes the number + of SPURR ticks for cpuX. + +What: /sys/devices/system/cpu/cpuX/idle_purr +Date: Apr 2020 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: PURR ticks for cpuX when it was idle. + + This sysfs interface exposes the number of PURR ticks + for cpuX when it was idle. + +What: /sys/devices/system/cpu/cpuX/idle_spurr +Date: Apr 2020 +Contact: Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org> +Description: SPURR ticks for cpuX when it was idle. + + This sysfs interface exposes the number of SPURR ticks + for cpuX when it was idle. diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs index 782df74042ed..1a14bf9b22ba 100644 --- a/Documentation/ABI/testing/sysfs-driver-habanalabs +++ b/Documentation/ABI/testing/sysfs-driver-habanalabs @@ -10,6 +10,23 @@ KernelVersion: 5.1 Contact: oded.gabbay@gmail.com Description: Version of the application running on the device's CPU +What: /sys/class/habanalabs/hl<n>/clk_max_freq_mhz +Date: Jun 2019 +KernelVersion: not yet upstreamed +Contact: oded.gabbay@gmail.com +Description: Allows the user to set the maximum clock frequency, in MHz. + The device clock might be set to lower value than the maximum. + The user should read the clk_cur_freq_mhz to see the actual + frequency value of the device clock. This property is valid + only for the Gaudi ASIC family + +What: /sys/class/habanalabs/hl<n>/clk_cur_freq_mhz +Date: Jun 2019 +KernelVersion: not yet upstreamed +Contact: oded.gabbay@gmail.com +Description: Displays the current frequency, in MHz, of the device clock. + This property is valid only for the Gaudi ASIC family + What: /sys/class/habanalabs/hl<n>/cpld_ver Date: Jan 2019 KernelVersion: 5.1 diff --git a/Documentation/ABI/testing/sysfs-driver-w1_therm b/Documentation/ABI/testing/sysfs-driver-w1_therm new file mode 100644 index 000000000000..076659d506f2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-w1_therm @@ -0,0 +1,116 @@ +What: /sys/bus/w1/devices/.../alarms +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RW) read or write TH and TL (Temperature High an Low) alarms. + Values shall be space separated and in the device range + (typical -55 degC to 125 degC), if not values will be trimmed + to device min/max capabilities. Values are integer as they are + stored in a 8bit register in the device. Lowest value is + automatically put to TL. Once set, alarms could be search at + master level, refer to Documentation/w1/w1_generic.rst for + detailed information +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/.../eeprom +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (WO) writing that file will either trigger a save of the + device data to its embedded EEPROM, either restore data + embedded in device EEPROM. Be aware that devices support + limited EEPROM writing cycles (typical 50k) + * 'save': save device RAM to EEPROM + * 'restore': restore EEPROM data in device RAM +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/.../ext_power +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RO) return the power status by asking the device + * '0': device parasite powered + * '1': device externally powered + * '-xx': xx is kernel error when reading power status +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/.../resolution +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RW) get or set the device resolution (on supported devices, + if not, this entry is not present). Note that the resolution + will be changed only in device RAM, so it will be cleared when + power is lost. Trigger a 'save' to EEPROM command to keep + values after power-on. Read or write are : + * '9..12': device resolution in bit + or resolution to set in bit + * '-xx': xx is kernel error when reading the resolution + * Anything else: do nothing +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/.../temperature +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RO) return the temperature in 1/1000 degC. + * If a bulk read has been triggered, it will directly + return the temperature computed when the bulk read + occurred, if available. If not yet available, nothing + is returned (a debug kernel message is sent), you + should retry later on. + * If no bulk read has been triggered, it will trigger + a conversion and send the result. Note that the + conversion duration depend on the resolution (if + device support this feature). It takes 94ms in 9bits + resolution, 750ms for 12bits. +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/.../w1_slave +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RW) return the temperature in 1/1000 degC. + *read*: return 2 lines with the hexa output data sent on the + bus, return the CRC check and temperature in 1/1000 degC + *write* : + * '0' : save the 2 or 3 bytes to the device EEPROM + (i.e. TH, TL and config register) + * '9..12' : set the device resolution in RAM + (if supported) + * Anything else: do nothing + refer to Documentation/w1/slaves/w1_therm.rst for detailed + information. +Users: any user space application which wants to communicate with + w1_term device + + +What: /sys/bus/w1/devices/w1_bus_masterXX/therm_bulk_read +Date: May 2020 +Contact: Akira Shimahara <akira215corp@gmail.com> +Description: + (RW) trigger a bulk read conversion. read the status + *read*: + * '-1': conversion in progress on at least 1 sensor + * '1' : conversion complete but at least one sensor + value has not been read yet + * '0' : no bulk operation. Reading temperature will + trigger a conversion on each device + *write*: 'trigger': trigger a bulk read on all supporting + devices on the bus + Note that if a bulk read is sent but one sensor is not read + immediately, the next access to temperature on this device + will return the temperature measured at the time of issue + of the bulk read command (not the current temperature). +Users: any user space application which wants to communicate with + w1_term device diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index bd8a0d19abe6..4bb93a06d8ab 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -323,3 +323,27 @@ What: /sys/fs/f2fs/<disk>/mounted_time_sec Date: February 2020 Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> Description: Show the mounted time in secs of this partition. + +What: /sys/fs/f2fs/<disk>/data_io_flag +Date: April 2020 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Give a way to attach REQ_META|FUA to data writes + given temperature-based bits. Now the bits indicate: + * REQ_META | REQ_FUA | + * 5 | 4 | 3 | 2 | 1 | 0 | + * Cold | Warm | Hot | Cold | Warm | Hot | + +What: /sys/fs/f2fs/<disk>/node_io_flag +Date: June 2020 +Contact: "Jaegeuk Kim" <jaegeuk@kernel.org> +Description: Give a way to attach REQ_META|FUA to node writes + given temperature-based bits. Now the bits indicate: + * REQ_META | REQ_FUA | + * 5 | 4 | 3 | 2 | 1 | 0 | + * Cold | Warm | Hot | Cold | Warm | Hot | + +What: /sys/fs/f2fs/<disk>/iostat_period_ms +Date: April 2020 +Contact: "Daeho Jeong" <daehojeong@google.com> +Description: Give a way to change iostat_period time. 3secs by default. + The new iostat trace gives stats gap given the period. diff --git a/Documentation/ABI/testing/sysfs-platform-dptf b/Documentation/ABI/testing/sysfs-platform-dptf index 325dc0667dbb..eeed81ca6949 100644 --- a/Documentation/ABI/testing/sysfs-platform-dptf +++ b/Documentation/ABI/testing/sysfs-platform-dptf @@ -27,10 +27,12 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) Display the platform power source - 0x00 = DC - 0x01 = AC - 0x02 = USB - 0x03 = Wireless Charger + bits[3:0] Current power source + 0x00 = DC + 0x01 = AC + 0x02 = USB + 0x03 = Wireless Charger + bits[7:4] Power source sequence number What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power Date: Jul, 2016 @@ -38,3 +40,55 @@ KernelVersion: v4.10 Contact: linux-acpi@vger.kernel.org Description: (RO) The maximum sustained power for battery in milliwatts. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/rest_of_platform_power_mw +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) Shows the rest (outside of SoC) of worst-case platform power. + +What: /sys/bus/platform/devices/INT3407:00/dptf_power/prochot_confirm +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (WO) Confirm embedded controller about a prochot notification. + +What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_platform_power_mw +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The maximum platform power that can be supported by the battery in milli watts. + +What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_steady_state_power_mw +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The maximum sustained power for battery in milli watts. + +What: /sys/bus/platform/devices/INT3532:00/dptf_battery/high_freq_impedance_mohm +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The high frequency impedance value that can be obtained from battery + fuel gauge in milli Ohms. + +What: /sys/bus/platform/devices/INT3532:00/dptf_battery/no_load_voltage_mv +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The no-load voltage that can be obtained from battery fuel gauge in + milli volts. + +What: /sys/bus/platform/devices/INT3532:00/dptf_battery/current_discharge_capbility_ma +Date: June, 2020 +KernelVersion: v5.8 +Contact: linux-acpi@vger.kernel.org +Description: + (RO) The battery discharge current capability obtained from battery fuel gauge in + milli Amps. diff --git a/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update new file mode 100644 index 000000000000..5aa618987cad --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-intel-wmi-sbl-fw-update @@ -0,0 +1,12 @@ +What: /sys/bus/wmi/devices/44FADEB1-B204-40F2-8581-394BBDC1B651/firmware_update_request +Date: April 2020 +KernelVersion: 5.7 +Contact: "Jithu Joseph" <jithu.joseph@intel.com> +Description: + Allow user space entities to trigger update of Slim + Bootloader (SBL). This attribute normally has a value + of 0 and userspace can signal SBL to update firmware, + on next reboot, by writing a value of 1. + There are two available states: + * 0 -> Skip firmware update while rebooting + * 1 -> Attempt firmware update on next reboot |