diff options
Diffstat (limited to 'Documentation/admin-guide/perf/hisi-pmu.rst')
| -rw-r--r-- | Documentation/admin-guide/perf/hisi-pmu.rst | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/Documentation/admin-guide/perf/hisi-pmu.rst b/Documentation/admin-guide/perf/hisi-pmu.rst index 404a5c3d9d00..e0174d20809a 100644 --- a/Documentation/admin-guide/perf/hisi-pmu.rst +++ b/Documentation/admin-guide/perf/hisi-pmu.rst @@ -53,6 +53,72 @@ Example usage of perf:: $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5 $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5 +For HiSilicon uncore PMU v2 whose identifier is 0x30, the topology is the same +as PMU v1, but some new functions are added to the hardware. + +1. L3C PMU supports filtering by core/thread within the cluster which can be +specified as a bitmap:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5 + +This will only count the operations from core/thread 0 and 1 in this cluster. + +2. Tracetag allow the user to chose to count only read, write or atomic +operations via the tt_req parameeter in perf. The default value counts all +operations. tt_req is 3bits, 3'b100 represents read operations, 3'b101 +represents write operations, 3'b110 represents atomic store operations and +3'b111 represents atomic non-store operations, other values are reserved:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5 + +This will only count the read operations in this cluster. + +3. Datasrc allows the user to check where the data comes from. It is 5 bits. +Some important codes are as follows: + +- 5'b00001: comes from L3C in this die; +- 5'b01000: comes from L3C in the cross-die; +- 5'b01001: comes from L3C which is in another socket; +- 5'b01110: comes from the local DDR; +- 5'b01111: comes from the cross-die DDR; +- 5'b10000: comes from cross-socket DDR; + +etc, it is mainly helpful to find that the data source is nearest from the CPU +cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be +configured in perf command:: + + $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/, + hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xF/ sleep 5 + +4. Some HiSilicon SoCs encapsulate multiple CPU and IO dies. Each CPU die +contains several Compute Clusters (CCLs). The I/O dies are called Super I/O +clusters (SICL) containing multiple I/O clusters (ICLs). Each CCL/ICL in the +SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit +CCL/ICL-ID. For I/O die, the ICL-ID is followed by: + +- 5'b00000: I/O_MGMT_ICL; +- 5'b00001: Network_ICL; +- 5'b00011: HAC_ICL; +- 5'b10000: PCIe_ICL; + +5. uring_channel: UC PMU events 0x47~0x59 supports filtering by tx request +uring channel. It is 2 bits. Some important codes are as follows: + +- 2'b11: count the events which sent to the uring_ext (MATA) channel; +- 2'b01: is the same as 2'b11; +- 2'b10: count the events which sent to the uring (non-MATA) channel; +- 2'b00: default value, count the events which sent to the both uring and + uring_ext channel; + +Users could configure IDs to count data come from specific CCL/ICL, by setting +srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting +tgtid_cmd & tgtid_msk. A set bit in srcid_msk/tgtid_msk means the PMU will not +check the bit when matching against the srcid_cmd/tgtid_cmd. + +If all of these options are disabled, it can works by the default value that +doesn't distinguish the filter condition and ID information and will return +the total counter values in the PMU counters. + The current driver does not support sampling. So "perf record" is unsupported. Also attach to a task is unsupported as the events are all uncore. |