1 files changed, 0 insertions, 37 deletions
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
deleted file mode 100644
index 0576b9df0bf2..000000000000
--- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-* AsahiKASEI AK8975 magnetometer sensor
-
-Required properties:
-
-  - compatible : should be "asahi-kasei,ak8975".
-  - reg : the I2C address of the magnetometer.
-
-Optional properties:
-
-  - gpios : AK8975 has a "Data ready" pin (DRDY) which informs that data
-      is ready to be read and is possible to listen on it. If used,
-      this should be active high. Prefer interrupt over this.
-
-  - interrupts : interrupt for DRDY pin. Triggered on rising edge.
-
-  - vdd-supply: an optional regulator that needs to be on to provide VDD.
-
-  - mount-matrix: an optional 3x3 mounting rotation matrix.
-
-Example:
-
-ak8975@c {
-        compatible = "asahi-kasei,ak8975";
-        reg = <0x0c>;
-        interrupt-parent = <&gpio6>;
-        interrupts = <15 IRQ_TYPE_EDGE_RISING>;
-        vdd-supply = <&ldo_3v3_gnss>;
-        mount-matrix = "-0.984807753012208",  /* x0 */
-                       "0",                   /* y0 */
-                       "-0.173648177666930",  /* z0 */
-                       "0",                   /* x1 */
-                       "-1",                  /* y1 */
-                       "0",                   /* z1 */
-                       "-0.173648177666930",  /* x2 */
-                       "0",                   /* y2 */
-                       "0.984807753012208";   /* z2 */
-};