1 files changed, 0 insertions, 42 deletions
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
deleted file mode 100644
index d3db65916a36..000000000000
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Cypress I2C Touchpad
-
-Required properties:
-- compatible: must be "cypress,cyapa".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-	binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-	pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	&i2c0 {
-		/* ... */
-
-		/* Cypress Gen3 touchpad */
-		touchpad@67 {
-			compatible = "cypress,cyapa";
-			reg = <0x67>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* Cypress Gen5 and later touchpad */
-		touchpad@24 {
-			compatible = "cypress,cyapa";
-			reg = <0x24>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* ... */
-	};