diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox/arm,mhu.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/mailbox/arm,mhu.yaml | 169 |
1 files changed, 169 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000000..d9a4f4a02d7c --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + + The MHU hardware also allows operations in doorbell mode. The MHU drives the + interrupt signal using a 32-bit register, with all 32-bits logically ORed + together. It provides a set of registers to enable software to set, clear and + check the status of each of the bits of this register independently. The use + of 32 bits per interrupt line enables software to provide more information + about the source of the interrupt. For example, each bit of the register can + be associated with a type of event that can contribute to raising the + interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote + processor. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhu + - arm,mhu-doorbell + required: + - compatible + +properties: + compatible: + oneOf: + - description: Data transfer mode + items: + - const: arm,mhu + - const: arm,primecell + + - description: Doorbell mode + items: + - const: arm,mhu-doorbell + - const: arm,primecell + + + reg: + maxItems: 1 + + interrupts: + minItems: 2 + items: + - description: low-priority non-secure + - description: high-priority non-secure + - description: Secure + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: | + Set to 1 in data transfer mode and represents index of the channel. + Set to 2 in doorbell mode and represents index of the channel and doorbell + number. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + # Data transfer mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scpi { + compatible = "arm,scpi"; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + shmem = <&cpu_scp_hpri>; /* HP-NonSecure */ + + scpi_devpd: power-controller { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; + }; + }; + + # Doorbell mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuB: mailbox@2b2f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu-doorbell", "arm,primecell"; + reg = <0 0x2b2f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + }; + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&mhuB 0 0>, /* LP-NonSecure, 1st doorbell */ + <&mhuB 0 1>; /* LP-NonSecure, 2nd doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, + <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_devpd: protocol@11 { + reg = <0x11>; + #power-domain-cells = <1>; + }; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #clock-cells = <1>; + + mboxes = <&mhuB 1 2>, /* HP-NonSecure, 3rd doorbell */ + <&mhuB 1 3>; /* HP-NonSecure, 4th doorbell */ + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_hpri0>, + <&cpu_scp_hpri1>; + }; + }; + }; + +... |