1 files changed, 0 insertions, 100 deletions
diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
deleted file mode 100644
index 6b02a0657ad9..000000000000
--- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt
+++ /dev/null
@@ -1,100 +0,0 @@
-Cadence MIPI-CSI2 RX controller
-===============================
-
-The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI
-lanes in input, and 4 different pixel streams in output.
-
-Required properties:
-  - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible
-  - reg: base address and size of the memory mapped region
-  - clocks: phandles to the clocks driving the controller
-  - clock-names: must contain:
-    * sys_clk: main clock
-    * p_clk: register bank clock
-    * pixel_if[0-3]_clk: pixel stream output clock, one for each stream
-                         implemented in hardware, between 0 and 3
-
-Optional properties:
-  - phys: phandle to the external D-PHY, phy-names must be provided
-  - phy-names: must contain "dphy", if the implementation uses an
-               external D-PHY
-
-Required subnodes:
-  - ports: A ports node with one port child node per device input and output
-           port, in accordance with the video interface bindings defined in
-           Documentation/devicetree/bindings/media/video-interfaces.txt. The
-           port nodes are numbered as follows:
-
-           Port Description
-           -----------------------------
-           0    CSI-2 input
-           1    Stream 0 output
-           2    Stream 1 output
-           3    Stream 2 output
-           4    Stream 3 output
-
-           The stream output port nodes are optional if they are not
-           connected to anything at the hardware level or implemented
-           in the design.Since there is only one endpoint per port,
-           the endpoints are not numbered.
-
-
-Example:
-
-csi2rx: csi-bridge@0d060000 {
-	compatible = "cdns,csi2rx";
-	reg = <0x0d060000 0x1000>;
-	clocks = <&byteclock>, <&byteclock>
-		 <&coreclock>, <&coreclock>,
-		 <&coreclock>, <&coreclock>;
-	clock-names = "sys_clk", "p_clk",
-		      "pixel_if0_clk", "pixel_if1_clk",
-		      "pixel_if2_clk", "pixel_if3_clk";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			csi2rx_in_sensor: endpoint {
-				remote-endpoint = <&sensor_out_csi2rx>;
-				clock-lanes = <0>;
-				data-lanes = <1 2>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			csi2rx_out_grabber0: endpoint {
-				remote-endpoint = <&grabber0_in_csi2rx>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			csi2rx_out_grabber1: endpoint {
-				remote-endpoint = <&grabber1_in_csi2rx>;
-			};
-		};
-
-		port@3 {
-			reg = <3>;
-
-			csi2rx_out_grabber2: endpoint {
-				remote-endpoint = <&grabber2_in_csi2rx>;
-			};
-		};
-
-		port@4 {
-			reg = <4>;
-
-			csi2rx_out_grabber3: endpoint {
-				remote-endpoint = <&grabber3_in_csi2rx>;
-			};
-		};
-	};
-};