diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/brcm,bcmgenet.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/brcm,bcmgenet.txt | 124 |
1 files changed, 0 insertions, 124 deletions
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt deleted file mode 100644 index 33a0d67e4ce5..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ /dev/null @@ -1,124 +0,0 @@ -* Broadcom BCM7xxx Ethernet Controller (GENET) - -Required properties: -- compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2", - "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5". -- reg: address and length of the register set for the device -- interrupts and/or interrupts-extended: must be two cells, the first cell - is the general purpose interrupt line, while the second cell is the - interrupt for the ring RX and TX queues operating in ring mode. An - optional third interrupt cell for Wake-on-LAN can be specified. - See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - for information on the property specifics. -- phy-mode: see ethernet.txt file in the same directory -- #address-cells: should be 1 -- #size-cells: should be 1 - -Optional properties: -- clocks: When provided, must be two phandles to the functional clocks nodes - of the GENET block. The first phandle is the main GENET clock used during - normal operation, while the second phandle is the Wake-on-LAN clock. -- clock-names: When provided, names of the functional clock phandles, first - name should be "enet" and second should be "enet-wol". - -- phy-handle: See ethernet.txt file in the same directory; used to describe - configurations where a PHY (internal or external) is used. - -- fixed-link: When the GENET interface is connected to a MoCA hardware block or - when operating in a RGMII to RGMII type of connection, or when the MDIO bus is - voluntarily disabled, this property should be used to describe the "fixed link". - See Documentation/devicetree/bindings/net/fixed-link.txt for information on - the property specifics - -Required child nodes: - -- mdio bus node: this node should always be present regardless of the PHY - configuration of the GENET instance - -MDIO bus node required properties: - -- compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2" - "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version - has to match the parent node compatible property (e.g: brcm,genet-v4 pairs - with brcm,genet-mdio-v4) -- reg: address and length relative to the parent node base register address -- #address-cells: address cell for MDIO bus addressing, should be 1 -- #size-cells: size of the cells for MDIO bus addressing, should be 0 - -Ethernet PHY node properties: - -See Documentation/devicetree/bindings/net/phy.txt for the list of required and -optional properties. - -Internal Gigabit PHY example: - -ethernet@f0b60000 { - phy-mode = "internal"; - phy-handle = <&phy1>; - mac-address = [ 00 10 18 36 23 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b60000 0xfc4c>; - interrupts = <0x0 0x14 0x0>, <0x0 0x15 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy1: ethernet-phy@1 { - max-speed = <1000>; - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -MoCA interface / MAC to MAC example: - -ethernet@f0b80000 { - phy-mode = "moca"; - fixed-link = <1 0 1000 0 0>; - mac-address = [ 00 10 18 36 24 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0b80000 0xfc4c>; - interrupts = <0x0 0x16 0x0>, <0x0 0x17 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - }; -}; - - -External MDIO-connected Gigabit PHY/switch: - -ethernet@f0ba0000 { - phy-mode = "rgmii"; - phy-handle = <&phy0>; - mac-address = [ 00 10 18 36 26 1a ]; - compatible = "brcm,genet-v4"; - #address-cells = <0x1>; - #size-cells = <0x1>; - reg = <0xf0ba0000 0xfc4c>; - interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - - mdio@e14 { - compatible = "brcm,genet-mdio-v4"; - #address-cells = <0x1>; - #size-cells = <0x0>; - reg = <0xe14 0x8>; - - phy0: ethernet-phy@0 { - max-speed = <1000>; - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; -}; |