diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/can/tcan4x5x.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/can/tcan4x5x.txt | 14 |
1 files changed, 11 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt index e3501bfa22e9..20c0572c9853 100644 --- a/Documentation/devicetree/bindings/net/can/tcan4x5x.txt +++ b/Documentation/devicetree/bindings/net/can/tcan4x5x.txt @@ -4,7 +4,10 @@ Texas Instruments TCAN4x5x CAN Controller This file provides device node information for the TCAN4x5x interface contains. Required properties: - - compatible: "ti,tcan4x5x" + - compatible: + "ti,tcan4552", "ti,tcan4x5x" + "ti,tcan4553", "ti,tcan4x5x" or + "ti,tcan4x5x" - reg: 0 - #address-cells: 1 - #size-cells: 0 @@ -21,8 +24,12 @@ Optional properties: - reset-gpios: Hardwired output GPIO. If not defined then software reset. - device-state-gpios: Input GPIO that indicates if the device is in - a sleep state or if the device is active. - - device-wake-gpios: Wake up GPIO to wake up the TCAN device. + a sleep state or if the device is active. Not + available with tcan4552/4553. + - device-wake-gpios: Wake up GPIO to wake up the TCAN device. Not + available with tcan4552/4553. + - wakeup-source: Leave the chip running when suspended, and configure + the RX interrupt to wake up the device. Example: tcan4x5x: tcan4x5x@0 { @@ -37,4 +44,5 @@ tcan4x5x: tcan4x5x@0 { device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + wakeup-source; }; |