diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml | 224 |
1 files changed, 0 insertions, 224 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml deleted file mode 100644 index 73ae6e11410b..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml +++ /dev/null @@ -1,224 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Mediatek MT6795 Pin Controller - -maintainers: - - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> - - Sean Wang <sean.wang@kernel.org> - -description: | - The Mediatek's Pin controller is used to control SoC pins. - -properties: - compatible: - const: mediatek,mt6795-pinctrl - - gpio-controller: true - - '#gpio-cells': - description: | - Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - const: 2 - - gpio-ranges: - description: GPIO valid number range. - maxItems: 1 - - reg: - description: - Physical address base for gpio base and eint registers. - minItems: 2 - - reg-names: - items: - - const: base - - const: eint - - interrupt-controller: true - - '#interrupt-cells': - const: 2 - - interrupts: - description: The interrupt outputs to sysirq. - maxItems: 1 - -# PIN CONFIGURATION NODES -patternProperties: - '-pins$': - type: object - additionalProperties: false - patternProperties: - '^pins': - type: object - additionalProperties: false - description: | - A pinctrl node should contain at least one subnodes representing the - pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. - An example of using macro: - pincontroller { - /* GPIO0 set as multifunction GPIO0 */ - gpio-pins { - pins { - pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; - } - }; - /* GPIO45 set as multifunction SDA0 */ - i2c0-pins { - pins { - pinmux = <PINMUX_GPIO45__FUNC_SDA0>; - } - }; - }; - $ref: "pinmux-node.yaml" - - properties: - pinmux: - description: | - Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are - defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h - directly. - - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - - bias-pull-down: - oneOf: - - type: boolean - - enum: [100, 101, 102, 103] - description: mt6795 pull down PUPD/R0/R1 type define value. - description: | - For normal pull down type, it is not necessary to specify R1R0 - values; When pull down type is PUPD/R0/R1, adding R1R0 defines - will set different resistance values. - - bias-pull-up: - oneOf: - - type: boolean - - enum: [100, 101, 102, 103] - description: mt6795 pull up PUPD/R0/R1 type define value. - description: | - For normal pull up type, it is not necessary to specify R1R0 - values; When pull up type is PUPD/R0/R1, adding R1R0 defines - will set different resistance values. - - bias-disable: true - - output-high: true - - output-low: true - - input-enable: true - - input-disable: true - - input-schmitt-enable: true - - input-schmitt-disable: true - - mediatek,pull-up-adv: - description: | - Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - mediatek,pull-down-adv: - description: | - Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: - 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. - 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. - 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. - 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] - - required: - - pinmux - -allOf: - - $ref: "pinctrl.yaml#" - -required: - - compatible - - reg - - reg-names - - interrupts - - interrupt-controller - - '#interrupt-cells' - - gpio-controller - - '#gpio-cells' - - gpio-ranges - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/pinctrl/mt6795-pinfunc.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - pio: pinctrl@10005000 { - compatible = "mediatek,mt6795-pinctrl"; - reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>; - reg-names = "base", "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 196>; - interrupt-controller; - interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - - i2c0-pins { - pins-sda-scl { - pinmux = <PINMUX_GPIO45__FUNC_SDA0>, - <PINMUX_GPIO46__FUNC_SCL0>; - }; - }; - - mmc0-pins { - pins-cmd-dat { - pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>, - <PINMUX_GPIO155__FUNC_MSDC0_DAT1>, - <PINMUX_GPIO156__FUNC_MSDC0_DAT2>, - <PINMUX_GPIO157__FUNC_MSDC0_DAT3>, - <PINMUX_GPIO158__FUNC_MSDC0_DAT4>, - <PINMUX_GPIO159__FUNC_MSDC0_DAT5>, - <PINMUX_GPIO160__FUNC_MSDC0_DAT6>, - <PINMUX_GPIO161__FUNC_MSDC0_DAT7>, - <PINMUX_GPIO162__FUNC_MSDC0_CMD>; - input-enable; - bias-pull-up = <MTK_PUPD_SET_R1R0_01>; - }; - - pins-clk { - pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>; - bias-pull-down = <MTK_PUPD_SET_R1R0_10>; - }; - - pins-rst { - pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>; - bias-pull-up = <MTK_PUPD_SET_R1R0_10>; - }; - }; - }; - }; |