1 files changed, 83 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
new file mode 100644
index 000000000000..510f6cb0f084
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 Power Manager controller
+
+maintainers:
+  - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+      - items:
+          - enum:
+              - loongson,ls2k1000-pmc
+              - loongson,ls2k2000-pmc
+          - const: loongson,ls2k0500-pmc
+          - const: syscon
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  loongson,suspend-address:
+    $ref: /schemas/types.yaml#/definitions/uint64
+    description:
+      The "loongson,suspend-address" is a deep sleep state (Suspend To
+      RAM) firmware entry address which was jumped from kernel and it's
+      value was dependent on specific platform firmware code. In
+      addition, the PM need according to it to indicate that current
+      SoC whether support Suspend To RAM.
+
+  syscon-poweroff:
+    $ref: /schemas/power/reset/syscon-poweroff.yaml#
+    type: object
+    description:
+      Node for power off method
+
+  syscon-reboot:
+    $ref: /schemas/power/reset/syscon-reboot.yaml#
+    type: object
+    description:
+      Node for reboot method
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    power-management@1fe27000 {
+        compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon";
+        reg = <0x1fe27000 0x58>;
+        interrupt-parent = <&liointc1>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        loongson,suspend-address = <0x0 0x1c000500>;
+
+        syscon-reboot {
+            compatible = "syscon-reboot";
+            offset = <0x30>;
+            mask = <0x1>;
+        };
+
+        syscon-poweroff {
+            compatible = "syscon-poweroff";
+            regmap = <&pmc>;
+            offset = <0x14>;
+            mask = <0x3c00>;
+            value = <0x3c00>;
+        };
+    };