aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml')
-rw-r--r--Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml141
1 files changed, 141 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
new file mode 100644
index 000000000000..054b53954ac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAU88L21 audio codec
+
+maintainers:
+ - Seven Lee <wtli@nuvoton.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: nuvoton,nau8821
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ nuvoton,jkdet-enable:
+ description: Enable jack detection via JKDET pin.
+ type: boolean
+
+ nuvoton,jkdet-pull-enable:
+ description: Enable JKDET pin pull. If set - pin pull enabled,
+ otherwise pin in high impedance state.
+ type: boolean
+
+ nuvoton,jkdet-pull-up:
+ description: Pull-up JKDET pin. If set then JKDET pin is pull up,
+ otherwise pull down.
+ type: boolean
+
+ nuvoton,key-enable:
+ description: handles key press detection.
+ type: boolean
+
+ nuvoton,jkdet-polarity:
+ description: JKDET pin polarity.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # active high
+ - 1 # active low
+ default: 1
+
+ nuvoton,micbias-voltage:
+ description: MICBIAS output level select.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # VDDA
+ - 1 # VDDA * 1
+ - 2 # VDDA * 1.1
+ - 3 # VDDA * 1.2
+ - 4 # VDDA * 1.3
+ - 5 # VDDA * 1.4
+ - 6 # VDDA * 1.53
+ - 7 # VDDA * 1.53
+ default: 6
+
+ nuvoton,vref-impedance:
+ description: VMID Tie-off impedance select.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # open
+ - 1 # 25KOhms
+ - 2 # 125KOhms
+ - 3 # 2.5KOhms
+ default: 2
+
+ nuvoton,jack-insert-debounce:
+ description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 7
+ default: 7
+
+ nuvoton,jack-eject-debounce:
+ description: number from 0 to 7 that sets debounce time to 2^(n+2)ms.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 7
+ default: 0
+
+ nuvoton,dmic-clk-threshold:
+ description: DMIC clock speed expected value. Unit is Hz.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 3072000
+
+ nuvoton,dmic-slew-rate:
+ description: The range 0 to 7 represents the speed of DMIC slew rate.
+ The lowest value 0 means the slowest rate and the highest value
+ 7 means the fastest rate.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 7
+ default: 0
+
+ nuvoton,left-input-single-end:
+ description: Enable left input with single-ended settings if set.
+ For the headset mic application, the single-ended control is
+ just limited to the left adc for design demand.
+ type: boolean
+
+ '#sound-dai-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ codec@1b {
+ compatible = "nuvoton,nau8821";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+ nuvoton,jkdet-enable;
+ nuvoton,jkdet-pull-enable;
+ nuvoton,jkdet-pull-up;
+ nuvoton,key-enable;
+ nuvoton,left-input-single-end;
+ nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>;
+ nuvoton,micbias-voltage = <6>;
+ nuvoton,vref-impedance = <2>;
+ nuvoton,jack-insert-debounce = <7>;
+ nuvoton,jack-eject-debounce = <0>;
+ nuvoton,dmic-clk-threshold = <3072000>;
+ nuvoton,dmic-slew-rate = <0>;
+ #sound-dai-cells = <0>;
+ };
+ };