diff options
Diffstat (limited to 'Documentation/devicetree/bindings/watchdog/gpio-wdt.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/watchdog/gpio-wdt.txt | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt deleted file mode 100644 index 198794963786..000000000000 --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt +++ /dev/null @@ -1,28 +0,0 @@ -* GPIO-controlled Watchdog - -Required Properties: -- compatible: Should contain "linux,wdt-gpio". -- gpios: From common gpio binding; gpio connection to WDT reset pin. -- hw_algo: The algorithm used by the driver. Should be one of the - following values: - - toggle: Either a high-to-low or a low-to-high transition clears - the WDT counter. The watchdog timer is disabled when GPIO is - left floating or connected to a three-state buffer. - - level: Low or high level starts counting WDT timeout, - the opposite level disables the WDT. Active level is determined - by the GPIO flags. -- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds). - -Optional Properties: -- always-running: If the watchdog timer cannot be disabled, add this flag to - have the driver keep toggling the signal without a client. It will only cease - to toggle the signal when the device is open and the timeout elapsed. - -Example: - watchdog: watchdog { - /* ADM706 */ - compatible = "linux,wdt-gpio"; - gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1600>; - }; |