diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst')
| -rw-r--r-- | Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst | 2120 |
1 files changed, 2117 insertions, 3 deletions
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index bee73065e993..786127b1e206 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -1213,7 +1213,7 @@ FWHT Flags - Luma AC coefficient table index. * - __s8 - ``y_dc_delta`` - - Luma DC delta vaue. + - Luma DC delta value. * - __s8 - ``y2_dc_delta`` - Y2 block DC delta value. @@ -1890,11 +1890,11 @@ params syntax' of the :ref:`vp9` specification for more details. * - __u8 - ``tree_probs[7]`` - Specifies the probability values to be used when decoding a Segment-ID. - See '5.15. Segmentation map' section of :ref:`vp9` for more details. + See '5.15 Segmentation map' section of :ref:`vp9` for more details. * - __u8 - ``pred_probs[3]`` - Specifies the probability values to be used when decoding a - Predicted-Segment-ID. See '6.4.14. Get segment id syntax' + Predicted-Segment-ID. See '6.4.14 Get segment id syntax' section of :ref:`vp9` for more details. * - __u8 - ``flags`` @@ -2048,3 +2048,2117 @@ This structure contains all loop filter related parameters. See sections - 0x2 - When set, the bitstream contains additional syntax elements that specify which mode and reference frame deltas are to be updated. + +.. _v4l2-codec-stateless-hevc: + +``V4L2_CID_STATELESS_HEVC_SPS (struct)`` + Specifies the Sequence Parameter Set fields (as extracted from the + bitstream) for the associated HEVC slice data. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.3.2 "Sequence parameter set RBSP + semantics" of the specification. + +.. c:type:: v4l2_ctrl_hevc_sps + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.2cm}|p{9.2cm}|p{6.9cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_sps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``video_parameter_set_id`` + - Specifies the value of the vps_video_parameter_set_id of the active VPS + as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" + of H.265 specifications. + * - __u8 + - ``seq_parameter_set_id`` + - Provides an identifier for the SPS for reference by other syntax elements + as described in section "7.4.3.2.1 General sequence parameter set RBSP semantics" + of H.265 specifications. + * - __u16 + - ``pic_width_in_luma_samples`` + - Specifies the width of each decoded picture in units of luma samples. + * - __u16 + - ``pic_height_in_luma_samples`` + - Specifies the height of each decoded picture in units of luma samples. + * - __u8 + - ``bit_depth_luma_minus8`` + - This value plus 8 specifies the bit depth of the samples of the luma array. + * - __u8 + - ``bit_depth_chroma_minus8`` + - This value plus 8 specifies the bit depth of the samples of the chroma arrays. + * - __u8 + - ``log2_max_pic_order_cnt_lsb_minus4`` + - Specifies the value of the variable MaxPicOrderCntLsb. + * - __u8 + - ``sps_max_dec_pic_buffering_minus1`` + - This value plus 1 specifies the maximum required size of the decoded picture buffer for + the coded video sequence (CVS). + * - __u8 + - ``sps_max_num_reorder_pics`` + - Indicates the maximum allowed number of pictures. + * - __u8 + - ``sps_max_latency_increase_plus1`` + - Used to signal MaxLatencyPictures, which indicates the maximum number of + pictures that can precede any picture in output order and follow that + picture in decoding order. + * - __u8 + - ``log2_min_luma_coding_block_size_minus3`` + - This value plus 3 specifies the minimum luma coding block size. + * - __u8 + - ``log2_diff_max_min_luma_coding_block_size`` + - Specifies the difference between the maximum and minimum luma coding block size. + * - __u8 + - ``log2_min_luma_transform_block_size_minus2`` + - This value plus 2 specifies the minimum luma transform block size. + * - __u8 + - ``log2_diff_max_min_luma_transform_block_size`` + - Specifies the difference between the maximum and minimum luma transform block size. + * - __u8 + - ``max_transform_hierarchy_depth_inter`` + - Specifies the maximum hierarchy depth for transform units of coding units coded + in inter prediction mode. + * - __u8 + - ``max_transform_hierarchy_depth_intra`` + - Specifies the maximum hierarchy depth for transform units of coding units coded in + intra prediction mode. + * - __u8 + - ``pcm_sample_bit_depth_luma_minus1`` + - This value plus 1 specifies the number of bits used to represent each of PCM sample values of the + luma component. + * - __u8 + - ``pcm_sample_bit_depth_chroma_minus1`` + - Specifies the number of bits used to represent each of PCM sample values of + the chroma components. + * - __u8 + - ``log2_min_pcm_luma_coding_block_size_minus3`` + - Plus 3 specifies the minimum size of coding blocks. + * - __u8 + - ``log2_diff_max_min_pcm_luma_coding_block_size`` + - Specifies the difference between the maximum and minimum size of coding blocks. + * - __u8 + - ``num_short_term_ref_pic_sets`` + - Specifies the number of st_ref_pic_set() syntax structures included in the SPS. + * - __u8 + - ``num_long_term_ref_pics_sps`` + - Specifies the number of candidate long-term reference pictures that are + specified in the SPS. + * - __u8 + - ``chroma_format_idc`` + - Specifies the chroma sampling. + * - __u8 + - ``sps_max_sub_layers_minus1`` + - This value plus 1 specifies the maximum number of temporal sub-layers. + * - __u64 + - ``flags`` + - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` + +.. raw:: latex + + \normalsize + +.. _hevc_sps_flags: + +``Sequence Parameter Set Flags`` + +.. raw:: latex + + \small + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` + - 0x00000001 + - + * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` + - 0x00000002 + - + * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` + - 0x00000008 + - + * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` + - 0x00000010 + - + * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` + - 0x00000020 + - + * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` + - 0x00000040 + - + * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` + - 0x00000080 + - + * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` + - 0x00000100 + - + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_PPS (struct)`` + Specifies the Picture Parameter Set fields (as extracted from the + bitstream) for the associated HEVC slice data. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.3.3 "Picture parameter set RBSP + semantics" of the specification. + +.. c:type:: v4l2_ctrl_hevc_pps + +.. tabularcolumns:: |p{1.2cm}|p{8.6cm}|p{7.5cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_pps + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``pic_parameter_set_id`` + - Identifies the PPS for reference by other syntax elements. + * - __u8 + - ``num_extra_slice_header_bits`` + - Specifies the number of extra slice header bits that are present + in the slice header RBSP for coded pictures referring to the PPS. + * - __u8 + - ``num_ref_idx_l0_default_active_minus1`` + - This value plus 1 specifies the inferred value of num_ref_idx_l0_active_minus1. + * - __u8 + - ``num_ref_idx_l1_default_active_minus1`` + - This value plus 1 specifies the inferred value of num_ref_idx_l1_active_minus1. + * - __s8 + - ``init_qp_minus26`` + - This value plus 26 specifies the initial value of SliceQp Y for each slice + referring to the PPS. + * - __u8 + - ``diff_cu_qp_delta_depth`` + - Specifies the difference between the luma coding tree block size + and the minimum luma coding block size of coding units that + convey cu_qp_delta_abs and cu_qp_delta_sign_flag. + * - __s8 + - ``pps_cb_qp_offset`` + - Specifies the offsets to the luma quantization parameter Cb. + * - __s8 + - ``pps_cr_qp_offset`` + - Specifies the offsets to the luma quantization parameter Cr. + * - __u8 + - ``num_tile_columns_minus1`` + - This value plus 1 specifies the number of tile columns partitioning the picture. + * - __u8 + - ``num_tile_rows_minus1`` + - This value plus 1 specifies the number of tile rows partitioning the picture. + * - __u8 + - ``column_width_minus1[20]`` + - This value plus 1 specifies the width of the i-th tile column in units of + coding tree blocks. + * - __u8 + - ``row_height_minus1[22]`` + - This value plus 1 specifies the height of the i-th tile row in units of coding + tree blocks. + * - __s8 + - ``pps_beta_offset_div2`` + - Specifies the default deblocking parameter offsets for beta divided by 2. + * - __s8 + - ``pps_tc_offset_div2`` + - Specifies the default deblocking parameter offsets for tC divided by 2. + * - __u8 + - ``log2_parallel_merge_level_minus2`` + - This value plus 2 specifies the value of the variable Log2ParMrgLevel. + * - __u8 + - ``padding[4]`` + - Applications and drivers must set this to zero. + * - __u64 + - ``flags`` + - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>` + +.. _hevc_pps_flags: + +``Picture Parameter Set Flags`` + +.. raw:: latex + + \small + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED`` + - 0x00000001 + - + * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` + - 0x00000002 + - + * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` + - 0x00000008 + - + * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` + - 0x00000010 + - + * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` + - 0x00000020 + - + * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` + - 0x00000040 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` + - 0x00000080 + - + * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` + - 0x00000100 + - + * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` + - 0x00000200 + - + * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` + - 0x00000400 + - + * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` + - 0x00000800 + - + * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` + - 0x00001000 + - + * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` + - 0x00002000 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` + - 0x00004000 + - + * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` + - 0x00008000 + - + * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` + - 0x00010000 + - + * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` + - 0x00020000 + - + * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` + - 0x00040000 + - + * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` + - 0x00080000 + - Specifies the presence of deblocking filter control syntax elements in + the PPS + * - ``V4L2_HEVC_PPS_FLAG_UNIFORM_SPACING`` + - 0x00100000 + - Specifies that tile column boundaries and likewise tile row boundaries + are distributed uniformly across the picture + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_SLICE_PARAMS (struct)`` + Specifies various slice-specific parameters, especially from the NAL unit + header, general slice segment header and weighted prediction parameter + parts of the bitstream. + These bitstream parameters are defined according to :ref:`hevc`. + They are described in section 7.4.7 "General slice segment header + semantics" of the specification. + This control is a dynamically sized 1-dimensional array, + V4L2_CTRL_FLAG_DYNAMIC_ARRAY flag must be set when using it. + +.. c:type:: v4l2_ctrl_hevc_slice_params + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_slice_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``bit_size`` + - Size (in bits) of the current slice data. + * - __u32 + - ``data_byte_offset`` + - Offset (in byte) to the video data in the current slice data. + * - __u32 + - ``num_entry_point_offsets`` + - Specifies the number of entry point offset syntax elements in the slice header. + When the driver supports it, the ``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS`` + must be set. + * - __u8 + - ``nal_unit_type`` + - Specifies the coding type of the slice (B, P or I). + * - __u8 + - ``nuh_temporal_id_plus1`` + - Minus 1 specifies a temporal identifier for the NAL unit. + * - __u8 + - ``slice_type`` + - + (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or + V4L2_HEVC_SLICE_TYPE_B). + * - __u8 + - ``colour_plane_id`` + - Specifies the colour plane associated with the current slice. + * - __s32 + - ``slice_pic_order_cnt`` + - Specifies the picture order count. + * - __u8 + - ``num_ref_idx_l0_active_minus1`` + - This value plus 1 specifies the maximum reference index for reference picture list 0 + that may be used to decode the slice. + * - __u8 + - ``num_ref_idx_l1_active_minus1`` + - This value plus 1 specifies the maximum reference index for reference picture list 1 + that may be used to decode the slice. + * - __u8 + - ``collocated_ref_idx`` + - Specifies the reference index of the collocated picture used for + temporal motion vector prediction. + * - __u8 + - ``five_minus_max_num_merge_cand`` + - Specifies the maximum number of merging motion vector prediction + candidates supported in the slice subtracted from 5. + * - __s8 + - ``slice_qp_delta`` + - Specifies the initial value of QpY to be used for the coding blocks in the slice. + * - __s8 + - ``slice_cb_qp_offset`` + - Specifies a difference to be added to the value of pps_cb_qp_offset. + * - __s8 + - ``slice_cr_qp_offset`` + - Specifies a difference to be added to the value of pps_cr_qp_offset. + * - __s8 + - ``slice_act_y_qp_offset`` + - Specifies the offset to the luma of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_act_cb_qp_offset`` + - Specifies the offset to the cb of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_act_cr_qp_offset`` + - Specifies the offset to the cr of quantization parameter qP derived in section 8.6.2 + * - __s8 + - ``slice_beta_offset_div2`` + - Specifies the deblocking parameter offsets for beta divided by 2. + * - __s8 + - ``slice_tc_offset_div2`` + - Specifies the deblocking parameter offsets for tC divided by 2. + * - __u8 + - ``pic_struct`` + - Indicates whether a picture should be displayed as a frame or as one or more fields. + * - __u32 + - ``slice_segment_addr`` + - Specifies the address of the first coding tree block in the slice segment. + * - __u8 + - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The list of L0 reference elements as indices in the DPB. + * - __u8 + - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The list of L1 reference elements as indices in the DPB. + * - __u16 + - ``short_term_ref_pic_set_size`` + - Specifies the size, in bits, of the short-term reference picture set, described as st_ref_pic_set() + in the specification, included in the slice header or SPS (section 7.3.6.1). + * - __u16 + - ``long_term_ref_pic_set_size`` + - Specifies the size, in bits, of the long-term reference picture set include in the slice header + or SPS. It is the number of bits in the conditional block if(long_term_ref_pics_present_flag) + in section 7.3.6.1 of the specification. + * - __u8 + - ``padding`` + - Applications and drivers must set this to zero. + * - struct :c:type:`v4l2_hevc_pred_weight_table` + - ``pred_weight_table`` + - The prediction weight coefficients for inter-picture prediction. + * - __u64 + - ``flags`` + - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` + +.. raw:: latex + + \normalsize + +.. _hevc_slice_params_flags: + +``Slice Parameters Flags`` + +.. raw:: latex + + \scriptsize + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` + - 0x00000001 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` + - 0x00000002 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` + - 0x00000004 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` + - 0x00000008 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` + - 0x00000010 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` + - 0x00000020 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` + - 0x00000040 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` + - 0x00000080 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` + - 0x00000100 + - + * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT`` + - 0x00000200 + - + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_ENTRY_POINT_OFFSETS (integer)`` + Specifies entry point offsets in bytes. + This control is a dynamically sized array. The number of entry point + offsets is reported by the ``elems`` field. + This bitstream parameter is defined according to :ref:`hevc`. + They are described in section 7.4.7.1 "General slice segment header + semantics" of the specification. + When multiple slices are submitted in a request, the length of + this array must be the sum of num_entry_point_offsets of all the + slices in the request. + +``V4L2_CID_STATELESS_HEVC_SCALING_MATRIX (struct)`` + Specifies the HEVC scaling matrix parameters used for the scaling process + for transform coefficients. + These matrix and parameters are defined according to :ref:`hevc`. + They are described in section 7.4.5 "Scaling list data semantics" of + the specification. + +.. c:type:: v4l2_ctrl_hevc_scaling_matrix + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{5.4cm}|p{6.8cm}|p{5.1cm}| + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_scaling_matrix + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``scaling_list_4x4[6][16]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_8x8[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_16x16[6][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_32x32[2][64]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_16x16[6]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + * - __u8 + - ``scaling_list_dc_coef_32x32[2]`` + - Scaling list is used for the scaling process for transform + coefficients. The values on each scaling list are expected + in raster scan order. + +.. raw:: latex + + \normalsize + +.. c:type:: v4l2_hevc_dpb_entry + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{1.0cm}|p{4.2cm}|p{12.1cm}| + +.. flat-table:: struct v4l2_hevc_dpb_entry + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u64 + - ``timestamp`` + - Timestamp of the V4L2 capture buffer to use as reference, used + with B-coded and P-coded frames. The timestamp refers to the + ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the + :c:func:`v4l2_timeval_to_ns()` function to convert the struct + :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __u8 + - ``flags`` + - Long term flag for the reference frame + (V4L2_HEVC_DPB_ENTRY_LONG_TERM_REFERENCE). The flag is set as + described in the ITU HEVC specification chapter "8.3.2 Decoding + process for reference picture set". + * - __u8 + - ``field_pic`` + - Whether the reference is a field picture or a frame. + See :ref:`HEVC dpb field pic Flags <hevc_dpb_field_pic_flags>` + * - __s32 + - ``pic_order_cnt_val`` + - The picture order count of the current picture. + * - __u8 + - ``padding[2]`` + - Applications and drivers must set this to zero. + +.. raw:: latex + + \normalsize + +.. _hevc_dpb_field_pic_flags: + +``HEVC dpb field pic Flags`` + +.. raw:: latex + + \scriptsize + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME`` + - 0 + - (progressive) Frame + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_FIELD`` + - 1 + - Top field + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_FIELD`` + - 2 + - Bottom field + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM`` + - 3 + - Top field, bottom field, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP`` + - 4 + - Bottom field, top field, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_BOTTOM_TOP`` + - 5 + - Top field, bottom field, top field repeated, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM`` + - 6 + - Bottom field, top field, bottom field repeated, in that order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_DOUBLING`` + - 7 + - Frame doubling + * - ``V4L2_HEVC_SEI_PIC_STRUCT_FRAME_TRIPLING`` + - 8 + - Frame tripling + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_PREVIOUS_BOTTOM`` + - 9 + - Top field paired with previous bottom field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_PREVIOUS_TOP`` + - 10 + - Bottom field paired with previous top field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_TOP_PAIRED_NEXT_BOTTOM`` + - 11 + - Top field paired with next bottom field in output order + * - ``V4L2_HEVC_SEI_PIC_STRUCT_BOTTOM_PAIRED_NEXT_TOP`` + - 12 + - Bottom field paired with next top field in output order + +.. c:type:: v4l2_hevc_pred_weight_table + +.. raw:: latex + + \footnotesize + +.. tabularcolumns:: |p{0.8cm}|p{10.6cm}|p{5.9cm}| + +.. flat-table:: struct v4l2_hevc_pred_weight_table + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s8 + - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The difference of the weighting factor applied to the luma + prediction value for list 0. + * - __s8 + - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The additive offset applied to the luma prediction value for list 0. + * - __s8 + - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the weighting factor applied to the chroma + prediction value for list 0. + * - __s8 + - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the additive offset applied to the chroma + prediction values for list 0. + * - __s8 + - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The difference of the weighting factor applied to the luma + prediction value for list 1. + * - __s8 + - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The additive offset applied to the luma prediction value for list 1. + * - __s8 + - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the weighting factor applied to the chroma + prediction value for list 1. + * - __s8 + - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` + - The difference of the additive offset applied to the chroma + prediction values for list 1. + * - __u8 + - ``luma_log2_weight_denom`` + - The base 2 logarithm of the denominator for all luma weighting + factors. + * - __s8 + - ``delta_chroma_log2_weight_denom`` + - The difference of the base 2 logarithm of the denominator for + all chroma weighting factors. + * - __u8 + - ``padding[6]`` + - Applications and drivers must set this to zero. + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_DECODE_MODE (enum)`` + Specifies the decoding mode to use. Currently exposes slice-based and + frame-based decoding but new modes might be added later on. + This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE + pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE + are required to set this control in order to specify the decoding mode + that is expected for the buffer. + Drivers may expose a single or multiple decoding modes, depending + on what they can support. + +.. c:type:: v4l2_stateless_hevc_decode_mode + +.. raw:: latex + + \small + +.. tabularcolumns:: |p{9.4cm}|p{0.6cm}|p{7.3cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_STATELESS_HEVC_DECODE_MODE_SLICE_BASED`` + - 0 + - Decoding is done at the slice granularity. + The OUTPUT buffer must contain a single slice. + * - ``V4L2_STATELESS_HEVC_DECODE_MODE_FRAME_BASED`` + - 1 + - Decoding is done at the frame granularity. + The OUTPUT buffer must contain all slices needed to decode the + frame. + +.. raw:: latex + + \normalsize + +``V4L2_CID_STATELESS_HEVC_START_CODE (enum)`` + Specifies the HEVC slice start code expected for each slice. + This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE + pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE + are required to set this control in order to specify the start code + that is expected for the buffer. + Drivers may expose a single or multiple start codes, depending + on what they can support. + +.. c:type:: v4l2_stateless_hevc_start_code + +.. tabularcolumns:: |p{9.2cm}|p{0.6cm}|p{7.5cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_STATELESS_HEVC_START_CODE_NONE`` + - 0 + - Selecting this value specifies that HEVC slices are passed + to the driver without any start code. The bitstream data should be + according to :ref:`hevc` 7.3.1.1 General NAL unit syntax, hence + contains emulation prevention bytes when required. + * - ``V4L2_STATELESS_HEVC_START_CODE_ANNEX_B`` + - 1 + - Selecting this value specifies that HEVC slices are expected + to be prefixed by Annex B start codes. According to :ref:`hevc` + valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. + +.. raw:: latex + + \normalsize + +``V4L2_CID_MPEG_VIDEO_BASELAYER_PRIORITY_ID (integer)`` + Specifies a priority identifier for the NAL unit, which will be applied to + the base layer. By default this value is set to 0 for the base layer, + and the next layer will have the priority ID assigned as 1, 2, 3 and so on. + The video encoder can't decide the priority id to be applied to a layer, + so this has to come from client. + This is applicable to H264 and valid Range is from 0 to 63. + Source Rec. ITU-T H.264 (06/2019); G.7.4.1.1, G.8.8.1. + +``V4L2_CID_MPEG_VIDEO_LTR_COUNT (integer)`` + Specifies the maximum number of Long Term Reference (LTR) frames at any + given time that the encoder can keep. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX (integer)`` + After setting this control the frame that will be queued next + will be marked as a Long Term Reference (LTR) frame + and given this LTR index which ranges from 0 to LTR_COUNT-1. + This is applicable to the H264 and HEVC encoders. + Source Rec. ITU-T H.264 (06/2019); Table 7.9 + +``V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES (bitmask)`` + Specifies the Long Term Reference (LTR) frame(s) to be used for + encoding the next frame queued after setting this control. + This provides a bitmask which consists of bits [0, LTR_COUNT-1]. + This is applicable to the H264 and HEVC encoders. + +``V4L2_CID_STATELESS_HEVC_DECODE_PARAMS (struct)`` + Specifies various decode parameters, especially the references picture order + count (POC) for all the lists (short, long, before, current, after) and the + number of entries for each of them. + These parameters are defined according to :ref:`hevc`. + They are described in section 8.3 "Slice decoding process" of the + specification. + +.. c:type:: v4l2_ctrl_hevc_decode_params + +.. cssclass:: longtable + +.. flat-table:: struct v4l2_ctrl_hevc_decode_params + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __s32 + - ``pic_order_cnt_val`` + - PicOrderCntVal as described in section 8.3.1 "Decoding process + for picture order count" of the specification. + * - __u16 + - ``short_term_ref_pic_set_size`` + - Specifies the size, in bits, of the short-term reference picture set, of the first slice + described as st_ref_pic_set() in the specification, included in the slice header + or SPS (section 7.3.6.1). + * - __u16 + - ``long_term_ref_pic_set_size`` + - Specifies the size, in bits, of the long-term reference picture set, of the first slice + included in the slice header or SPS. It is the number of bits in the conditional block + if(long_term_ref_pics_present_flag) in section 7.3.6.1 of the specification. + * - __u8 + - ``num_active_dpb_entries`` + - The number of entries in ``dpb``. + * - __u8 + - ``num_poc_st_curr_before`` + - The number of reference pictures in the short-term set that come before + the current frame. + * - __u8 + - ``num_poc_st_curr_after`` + - The number of reference pictures in the short-term set that come after + the current frame. + * - __u8 + - ``num_poc_lt_curr`` + - The number of reference pictures in the long-term set. + * - __u8 + - ``poc_st_curr_before[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocStCurrBefore as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the short term before references in DPB array. + * - __u8 + - ``poc_st_curr_after[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocStCurrAfter as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the short term after references in DPB array. + * - __u8 + - ``poc_lt_curr[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - PocLtCurr as described in section 8.3.2 "Decoding process for reference + picture set": provides the index of the long term references in DPB array. + * - __u8 + - ``num_delta_pocs_of_ref_rps_idx`` + - When the short_term_ref_pic_set_sps_flag in the slice header is equal to 0, + it is the same as the derived value NumDeltaPocs[RefRpsIdx]. It can be used to parse + the RPS data in slice headers instead of skipping it with @short_term_ref_pic_set_size. + When the value of short_term_ref_pic_set_sps_flag in the slice header is + equal to 1, num_delta_pocs_of_ref_rps_idx shall be set to 0. + * - struct :c:type:`v4l2_hevc_dpb_entry` + - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` + - The decoded picture buffer, for meta-data about reference frames. + * - __u64 + - ``flags`` + - See :ref:`Decode Parameters Flags <hevc_decode_params_flags>` + +.. _hevc_decode_params_flags: + +``Decode Parameters Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IRAP_PIC`` + - 0x00000001 + - + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_IDR_PIC`` + - 0x00000002 + - + * - ``V4L2_HEVC_DECODE_PARAM_FLAG_NO_OUTPUT_OF_PRIOR`` + - 0x00000004 + - + +.. _v4l2-codec-stateless-av1: + +``V4L2_CID_STATELESS_AV1_SEQUENCE (struct)`` + Represents an AV1 Sequence OBU (Open Bitstream Unit). See section 5.5 + "Sequence header OBU syntax" in :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_sequence + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_sequence + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``flags`` + - See :ref:`AV1 Sequence Flags <av1_sequence_flags>`. + * - __u8 + - ``seq_profile`` + - Specifies the features that can be used in the coded video sequence. + * - __u8 + - ``order_hint_bits`` + - Specifies the number of bits used for the order_hint field at each frame. + * - __u8 + - ``bit_depth`` + - the bit depth to use for the sequence as described in section 5.5.2 + "Color config syntax" in :ref:`av1` for more details. + * - __u8 + - ``reserved`` + - Applications and drivers must set this to zero. + * - __u16 + - ``max_frame_width_minus_1`` + - specifies the maximum frame width minus 1 for the frames represented by + this sequence header. + +.. _av1_sequence_flags: + +``AV1 Sequence Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE`` + - 0x00000001 + - If set, specifies that the coded video sequence contains only one coded + frame. If not set, specifies that the coded video sequence contains one + or more coded frames. + * - ``V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK`` + - 0x00000002 + - If set, indicates that superblocks contain 128x128 luma samples. + When equal to 0, it indicates that superblocks contain 64x64 luma + samples. The number of contained chroma samples depends on + subsampling_x and subsampling_y. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA`` + - 0x00000004 + - If set, specifies that the use_filter_intra syntax element may be + present. If not set, specifies that the use_filter_intra syntax element + will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER`` + - 0x00000008 + - Specifies whether the intra edge filtering process should be enabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND`` + - 0x00000010 + - If set, specifies that the mode info for inter blocks may contain the + syntax element interintra. If not set, specifies that the syntax element + interintra will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND`` + - 0x00000020 + - If set, specifies that the mode info for inter blocks may contain the + syntax element compound_type. If not set, specifies that the syntax + element compound_type will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION`` + - 0x00000040 + - If set, indicates that the allow_warped_motion syntax element may be + present. If not set, indicates that the allow_warped_motion syntax + element will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER`` + - 0x00000080 + - If set, indicates that the inter prediction filter type may be specified + independently in the horizontal and vertical directions. If the flag is + equal to 0, only one filter type may be specified, which is then used in + both directions. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT`` + - 0x00000100 + - If set, indicates that tools based on the values of order hints may be + used. If not set, indicates that tools based on order hints are + disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP`` + - 0x00000200 + - If set, indicates that the distance weights process may be used for + inter prediction. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS`` + - 0x00000400 + - If set, indicates that the use_ref_frame_mvs syntax element may be + present. If not set, indicates that the use_ref_frame_mvs syntax element + will not be present. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES`` + - 0x00000800 + - If set, specifies that the use_superres syntax element will be present + in the uncompressed header. If not set, specifies that the use_superres + syntax element will not be present (instead use_superres will be set to + 0 in the uncompressed header without being read). + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF`` + - 0x00001000 + - If set, specifies that cdef filtering may be enabled. If not set, + specifies that cdef filtering is disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION`` + - 0x00002000 + - If set, specifies that loop restoration filtering may be enabled. If not + set, specifies that loop restoration filtering is disabled. + * - ``V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME`` + - 0x00004000 + - If set, indicates that the video does not contain U and V color planes. + If not set, indicates that the video contains Y, U, and V color planes. + * - ``V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE`` + - 0x00008000 + - If set, signals full swing representation, i.e. "Full Range + Quantization". If not set, signals studio swing representation, i.e. + "Limited Range Quantization". + * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X`` + - 0x00010000 + - Specify the chroma subsampling format. + * - ``V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y`` + - 0x00020000 + - Specify the chroma subsampling format. + * - ``V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT`` + - 0x00040000 + - Specifies whether film grain parameters are present in the coded video + sequence. + * - ``V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q`` + - 0x00080000 + - If set, indicates that the U and V planes may have separate delta + quantizer values. If not set, indicates that the U and V planes will share + the same delta quantizer value. + +``V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY (struct)`` + Represents a single AV1 tile inside an AV1 Tile Group. Note that MiRowStart, + MiRowEnd, MiColStart and MiColEnd can be retrieved from struct + v4l2_av1_tile_info in struct v4l2_ctrl_av1_frame using tile_row and + tile_col. See section 6.10.1 "General tile group OBU semantics" in + :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_tile_group_entry + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_tile_group_entry + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u32 + - ``tile_offset`` + - Offset from the OBU data, i.e. where the coded tile data actually starts. + * - __u32 + - ``tile_size`` + - Specifies the size in bytes of the coded tile. Equivalent to "TileSize" + in :ref:`av1`. + * - __u32 + - ``tile_row`` + - Specifies the row of the current tile. Equivalent to "TileRow" in + :ref:`av1`. + * - __u32 + - ``tile_col`` + - Specifies the column of the current tile. Equivalent to "TileColumn" in + :ref:`av1`. + +.. c:type:: v4l2_av1_warp_model + + AV1 Warp Model as described in section 3 "Symbols and abbreviated terms" of + :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_WARP_MODEL_IDENTITY`` + - 0 + - Warp model is just an identity transform. + * - ``V4L2_AV1_WARP_MODEL_TRANSLATION`` + - 1 + - Warp model is a pure translation. + * - ``V4L2_AV1_WARP_MODEL_ROTZOOM`` + - 2 + - Warp model is a rotation + symmetric zoom + translation. + * - ``V4L2_AV1_WARP_MODEL_AFFINE`` + - 3 + - Warp model is a general affine transform. + +.. c:type:: v4l2_av1_reference_frame + +AV1 Reference Frames as described in section 6.10.24 "Ref frames semantics" +of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_REF_INTRA_FRAME`` + - 0 + - Intra Frame Reference. + * - ``V4L2_AV1_REF_LAST_FRAME`` + - 1 + - Last Frame Reference. + * - ``V4L2_AV1_REF_LAST2_FRAME`` + - 2 + - Last2 Frame Reference. + * - ``V4L2_AV1_REF_LAST3_FRAME`` + - 3 + - Last3 Frame Reference. + * - ``V4L2_AV1_REF_GOLDEN_FRAME`` + - 4 + - Golden Frame Reference. + * - ``V4L2_AV1_REF_BWDREF_FRAME`` + - 5 + - BWD Frame Reference. + * - ``V4L2_AV1_REF_ALTREF2_FRAME`` + - 6 + - ALTREF2 Frame Reference. + * - ``V4L2_AV1_REF_ALTREF_FRAME`` + - 7 + - ALTREF Frame Reference. + +.. c:type:: v4l2_av1_global_motion + +AV1 Global Motion parameters as described in section 6.8.17 +"Global motion params semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_global_motion + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - A bitfield containing the flags per reference frame. See + :ref:`AV1 Global Motion Flags <av1_global_motion_flags>` for more + details. + * - enum :c:type:`v4l2_av1_warp_model` + - ``type[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - The type of global motion transform used. + * - __s32 + - ``params[V4L2_AV1_TOTAL_REFS_PER_FRAME][6]`` + - This field has the same meaning as "gm_params" in :ref:`av1`. + * - __u8 + - ``invalid`` + - Bitfield indicating whether the global motion params are invalid for a + given reference frame. See section 7.11.3.6 Setup shear process and the + variable "warpValid". Use V4L2_AV1_GLOBAL_MOTION_IS_INVALID(ref) to + create a suitable mask. + * - __u8 + - ``reserved[3]`` + - Applications and drivers must set this to zero. + +.. _av1_global_motion_flags: + +``AV1 Global Motion Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_GLOBAL`` + - 0x00000001 + - Specifies whether global motion parameters are present for a particular + reference frame. + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_ROT_ZOOM`` + - 0x00000002 + - Specifies whether a particular reference frame uses rotation and zoom + global motion. + * - ``V4L2_AV1_GLOBAL_MOTION_FLAG_IS_TRANSLATION`` + - 0x00000004 + - Specifies whether a particular reference frame uses translation global + motion + +.. c:type:: v4l2_av1_frame_restoration_type + +AV1 Frame Restoration Type. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FRAME_RESTORE_NONE`` + - 0 + - No filtering is applied. + * - ``V4L2_AV1_FRAME_RESTORE_WIENER`` + - 1 + - Wiener filter process is invoked. + * - ``V4L2_AV1_FRAME_RESTORE_SGRPROJ`` + - 2 + - Self guided filter process is invoked. + * - ``V4L2_AV1_FRAME_RESTORE_SWITCHABLE`` + - 3 + - Restoration filter is swichtable. + +.. c:type:: v4l2_av1_loop_restoration + +AV1 Loop Restoration as described in section 6.10.15 "Loop restoration params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_loop_restoration + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Loop Restoration Flags <av1_loop_restoration_flags>`. + * - __u8 + - ``lr_unit_shift`` + - Specifies if the luma restoration size should be halved. + * - __u8 + - ``lr_uv_shift`` + - Specifies if the chroma size should be half the luma size. + * - __u8 + - ``reserved`` + - Applications and drivers must set this to zero. + * - :c:type:`v4l2_av1_frame_restoration_type` + - ``frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX]`` + - Specifies the type of restoration used for each plane. + * - __u8 + - ``loop_restoration_size[V4L2_AV1_MAX_NUM_PLANES]`` + - Specifies the size of loop restoration units in units of samples in the + current plane. + +.. _av1_loop_restoration_flags: + +``AV1 Loop Restoration Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_LR`` + - 0x00000001 + - Retains the same meaning as UsesLr in :ref:`av1`. + * - ``V4L2_AV1_LOOP_RESTORATION_FLAG_USES_CHROMA_LR`` + - 0x00000002 + - Retains the same meaning as UsesChromaLr in :ref:`av1`. + +.. c:type:: v4l2_av1_cdef + +AV1 CDEF params semantics as described in section 6.10.14 "CDEF params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_cdef + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``damping_minus_3`` + - Controls the amount of damping in the deringing filter. + * - __u8 + - ``bits`` + - Specifies the number of bits needed to specify which CDEF filter to + apply. + * - __u8 + - ``y_pri_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the primary filter. + * - __u8 + - ``y_sec_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the secondary filter. + * - __u8 + - ``uv_pri_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the primary filter. + * - __u8 + - ``uv_secondary_strength[V4L2_AV1_CDEF_MAX]`` + - Specifies the strength of the secondary filter. + +.. c:type:: v4l2_av1_segment_feature + +AV1 segment features as described in section 3 "Symbols and abbreviated terms" +of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEG_LVL_ALT_Q`` + - 0 + - Index for quantizer segment feature. + * - ``V4L2_AV1_SEG_LVL_ALT_LF_Y_V`` + - 1 + - Index for vertical luma loop filter segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_FRAME`` + - 5 + - Index for reference frame segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_SKIP`` + - 6 + - Index for skip segment feature. + * - ``V4L2_AV1_SEG_LVL_REF_GLOBALMV`` + - 7 + - Index for global mv feature. + * - ``V4L2_AV1_SEG_LVL_MAX`` + - 8 + - Number of segment features. + +.. c:type:: v4l2_av1_segmentation + +AV1 Segmentation params as defined in section 6.8.13 "Segmentation params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_segmentation + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Segmentation Flags <av1_segmentation_flags>` + * - __u8 + - ``last_active_seg_id`` + - Indicates the highest numbered segment id that has some + enabled feature. This is used when decoding the segment id to only decode + choices corresponding to used segments. + * - __u8 + - ``feature_enabled[V4L2_AV1_MAX_SEGMENTS]`` + - Bitmask defining which features are enabled in each segment. Use + V4L2_AV1_SEGMENT_FEATURE_ENABLED to build a suitable mask. + * - __u16 + - `feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX]`` + - Data attached to each feature. Data entry is only valid if the feature + is enabled. + +.. _av1_segmentation_flags: + +``AV1 Segmentation Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_SEGMENTATION_FLAG_ENABLED`` + - 0x00000001 + - If set, indicates that this frame makes use of the segmentation tool. If + not set, indicates that the frame does not use segmentation. + * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_MAP`` + - 0x00000002 + - If set, indicates that the segmentation map are updated during the + decoding of this frame. If not set, indicates that the segmentation map + from the previous frame is used. + * - ``V4L2_AV1_SEGMENTATION_FLAG_TEMPORAL_UPDATE`` + - 0x00000004 + - If set, indicates that the updates to the segmentation map are coded + relative to the existing segmentation map. If not set, indicates that + the new segmentation map is coded without reference to the existing + segmentation map. + * - ``V4L2_AV1_SEGMENTATION_FLAG_UPDATE_DATA`` + - 0x00000008 + - If set, indicates that the updates to the segmentation map are coded + relative to the existing segmentation map. If not set, indicates that + the new segmentation map is coded without reference to the existing + segmentation map. + * - ``V4L2_AV1_SEGMENTATION_FLAG_SEG_ID_PRE_SKIP`` + - 0x00000010 + - If set, indicates that the segment id will be read before the skip + syntax element. If not set, indicates that the skip syntax element will + be read first. + +.. c:type:: v4l2_av1_loop_filter + +AV1 Loop filter params as defined in section 6.8.10 "Loop filter semantics" of +:ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_global_motion + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Loop Filter flags <av1_loop_filter_flags>` for more details. + * - __u8 + - ``level[4]`` + - An array containing loop filter strength values. Different loop + filter strength values from the array are used depending on the image + plane being filtered, and the edge direction (vertical or horizontal) + being filtered. + * - __u8 + - ``sharpness`` + - indicates the sharpness level. The loop_filter_level and + loop_filter_sharpness together determine when a block edge is filtered, + and by how much the filtering can change the sample values. The loop + filter process is described in section 7.14 of :ref:`av1`. + * - __u8 + - ``ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - contains the adjustment needed for the filter level based on the + chosen reference frame. If this syntax element is not present, it + maintains its previous value. + * - __u8 + - ``mode_deltas[2]`` + - contains the adjustment needed for the filter level based on + the chosen mode. If this syntax element is not present, it maintains its + previous value. + * - __u8 + - ``delta_lf_res`` + - specifies the left shift which should be applied to decoded loop filter + delta values. + +.. _av1_loop_filter_flags: + +``AV1 Loop Filter Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED`` + - 0x00000001 + - If set, means that the filter level depends on the mode and reference + frame used to predict a block. If not set, means that the filter level + does not depend on the mode and reference frame. + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_UPDATE`` + - 0x00000002 + - If set, means that additional syntax elements are present that specify + which mode and reference frame deltas are to be updated. If not set, + means that these syntax elements are not present. + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT`` + - 0x00000004 + - Specifies whether loop filter delta values are present + * - ``V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI`` + - 0x00000008 + - A value equal to 1 specifies that separate loop filter + deltas are sent for horizontal luma edges, vertical luma edges, + the U edges, and the V edges. A value of delta_lf_multi equal to 0 + specifies that the same loop filter delta is used for all edges. + +.. c:type:: v4l2_av1_quantization + +AV1 Quantization params as defined in section 6.8.11 "Quantization params +semantics" of :ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_quantization + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Loop Filter flags <av1_quantization_flags>` for more details. + * - __u8 + - ``base_q_idx`` + - Indicates the base frame qindex. This is used for Y AC coefficients and + as the base value for the other quantizers. + * - __u8 + - ``delta_q_y_dc`` + - Indicates the Y DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_u_dc`` + - Indicates the U DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_u_ac`` + - Indicates the U AC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_v_dc`` + - Indicates the V DC quantizer relative to base_q_idx. + * - __u8 + - ``delta_q_v_ac`` + - Indicates the V AC quantizer relative to base_q_idx. + * - __u8 + - ``qm_y`` + - Specifies the level in the quantizer matrix that should be used for + luma plane decoding. + * - __u8 + - ``qm_u`` + - Specifies the level in the quantizer matrix that should be used for + chroma U plane decoding. + * - __u8 + - ``qm_v`` + - Specifies the level in the quantizer matrix that should be used for + chroma V plane decoding. + * - __u8 + - ``delta_q_res`` + - Specifies the left shift which should be applied to decoded quantizer + index delta values. + +.. _av1_quantization_flags: + +``AV1 Quantization Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_QUANTIZATION_FLAG_DIFF_UV_DELTA`` + - 0x00000001 + - If set, indicates that the U and V delta quantizer values are coded + separately. If not set, indicates that the U and V delta quantizer + values share a common value. + * - ``V4L2_AV1_QUANTIZATION_FLAG_USING_QMATRIX`` + - 0x00000002 + - If set, specifies that the quantizer matrix will be used to compute + quantizers. + * - ``V4L2_AV1_QUANTIZATION_FLAG_DELTA_Q_PRESENT`` + - 0x00000004 + - Specifies whether quantizer index delta values are present. + +.. c:type:: v4l2_av1_tile_info + +AV1 Tile info as defined in section 6.8.14 "Tile info semantics" of ref:`av1`. + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_av1_tile_info + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See + :ref:`AV1 Tile Info flags <av1_tile_info_flags>` for more details. + * - __u8 + - ``context_update_tile_id`` + - Specifies which tile to use for the CDF update. + * - __u8 + - ``tile_cols`` + - Specifies the number of tiles across the frame. + * - __u8 + - ``tile_rows`` + - Specifies the number of tiles down the frame. + * - __u32 + - ``mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1]`` + - An array specifying the start column (in units of 4x4 luma + samples) for each tile across the image. + * - __u32 + - ``mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1]`` + - An array specifying the start row (in units of 4x4 luma + samples) for each tile across the image. + * - __u32 + - ``width_in_sbs_minus_1[V4L2_AV1_MAX_TILE_COLS]`` + - Specifies the width of a tile minus 1 in units of superblocks. + * - __u32 + - ``height_in_sbs_minus_1[V4L2_AV1_MAX_TILE_ROWS]`` + - Specifies the height of a tile minus 1 in units of superblocks. + * - __u8 + - ``tile_size_bytes`` + - Specifies the number of bytes needed to code each tile size. + * - __u8 + - ``reserved[3]`` + - Applications and drivers must set this to zero. + +.. _av1_tile_info_flags: + +``AV1 Tile Info Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING`` + - 0x00000001 + - If set, means that the tiles are uniformly spaced across the frame. (In + other words, all tiles are the same size except for the ones at the + right and bottom edge which can be smaller). If not set means that the + tile sizes are coded. + +.. c:type:: v4l2_av1_frame_type + +AV1 Frame Type + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_KEY_FRAME`` + - 0 + - Key frame. + * - ``V4L2_AV1_INTER_FRAME`` + - 1 + - Inter frame. + * - ``V4L2_AV1_INTRA_ONLY_FRAME`` + - 2 + - Intra-only frame. + * - ``V4L2_AV1_SWITCH_FRAME`` + - 3 + - Switch frame. + +.. c:type:: v4l2_av1_interpolation_filter + +AV1 Interpolation Filter + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP`` + - 0 + - Eight tap filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SMOOTH`` + - 1 + - Eight tap smooth filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_EIGHTTAP_SHARP`` + - 2 + - Eight tap sharp filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_BILINEAR`` + - 3 + - Bilinear filter. + * - ``V4L2_AV1_INTERPOLATION_FILTER_SWITCHABLE`` + - 4 + - Filter selection is signaled at the block level. + +.. c:type:: v4l2_av1_tx_mode + +AV1 Tx mode as described in section 6.8.21 "TX mode semantics" of :ref:`av1`. + +.. raw:: latex + + \scriptsize + +.. tabularcolumns:: |p{7.4cm}|p{0.3cm}|p{9.6cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_TX_MODE_ONLY_4X4`` + - 0 + - The inverse transform will use only 4x4 transforms. + * - ``V4L2_AV1_TX_MODE_LARGEST`` + - 1 + - The inverse transform will use the largest transform size that fits + inside the block. + * - ``V4L2_AV1_TX_MODE_SELECT`` + - 2 + - The choice of transform size is specified explicitly for each block. + +``V4L2_CID_STATELESS_AV1_FRAME (struct)`` + Represents a Frame Header OBU. See 6.8 "Frame Header OBU semantics" of + :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_frame + +.. cssclass:: longtable + +.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| + +.. flat-table:: struct v4l2_ctrl_av1_frame + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - struct :c:type:`v4l2_av1_tile_info` + - ``tile_info`` + - Tile info + * - struct :c:type:`v4l2_av1_quantization` + - ``quantization`` + - Quantization parameters. + * - struct :c:type:`v4l2_av1_segmentation` + - ``segmentation`` + - Segmentation parameters. + * - __u8 + - ``superres_denom`` + - The denominator for the upscaling ratio. + * - struct :c:type:`v4l2_av1_loop_filter` + - ``loop_filter`` + - Loop filter params + * - struct :c:type:`v4l2_av1_cdef` + - ``cdef`` + - CDEF params + * - __u8 + - ``skip_mode_frame[2]`` + - Specifies the frames to use for compound prediction when skip_mode is + equal to 1. + * - __u8 + - ``primary_ref_frame`` + - Specifies which reference frame contains the CDF values and other state + that should be loaded at the start of the frame. + * - struct :c:type:`v4l2_av1_loop_restoration` + - ``loop_restoration`` + - Loop restoration parameters. + * - struct :c:type:`v4l2_av1_loop_global_motion` + - ``global_motion`` + - Global motion parameters. + * - __u32 + - ``flags`` + - See + :ref:`AV1 Frame flags <av1_frame_flags>` for more details. + * - enum :c:type:`v4l2_av1_frame_type` + - ``frame_type`` + - Specifies the AV1 frame type + * - __u32 + - ``order_hint`` + - Specifies OrderHintBits least significant bits of the expected output + order for this frame. + * - __u32 + - ``upscaled_width`` + - The upscaled width. + * - enum :c:type:`v4l2_av1_interpolation_filter` + - ``interpolation_filter`` + - Specifies the filter selection used for performing inter prediction. + * - enum :c:type:`v4l2_av1_tx_mode` + - ``tx_mode`` + - Specifies how the transform size is determined. + * - __u32 + - ``frame_width_minus_1`` + - Add 1 to get the frame's width. + * - __u32 + - ``frame_height_minus_1`` + - Add 1 to get the frame's height. + * - __u16 + - ``render_width_minus_1`` + - Add 1 to get the render width of the frame in luma samples. + * - __u16 + - ``render_height_minus_1`` + - Add 1 to get the render height of the frame in luma samples. + * - __u32 + - ``current_frame_id`` + - Specifies the frame id number for the current frame. Frame + id numbers are additional information that do not affect the decoding + process, but provide decoders with a way of detecting missing reference + frames so that appropriate action can be taken. + * - __u8 + - ``buffer_removal_time[V4L2_AV1_MAX_OPERATING_POINTS]`` + - Specifies the frame removal time in units of DecCT clock ticks counted + from the removal time of the last random access point for operating point + opNum. + * - __u8 + - ``reserved[4]`` + - Applications and drivers must set this to zero. + * - __u32 + - ``order_hints[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - Specifies the expected output order hint for each reference frame. + This field corresponds to the OrderHints variable from the specification + (section 5.9.2 "Uncompressed header syntax"). As such, this is only + used for non-intra frames and ignored otherwise. order_hints[0] is + always ignored. + * - __u64 + - ``reference_frame_ts[V4L2_AV1_TOTAL_REFS_PER_FRAME]`` + - The V4L2 timestamp for each of the reference frames enumerated in + enum :c:type:`v4l2_av1_reference_frame` starting at + ``V4L2_AV1_REF_LAST_FRAME``. This represents the state of reference + slot as described in the spec and updated by userland through the + "Reference frame update process" in section 7.20 The timestamp refers + to the ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the + :c:func:`v4l2_timeval_to_ns()` function to convert the struct + :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. + * - __s8 + - ``ref_frame_idx[V4L2_AV1_REFS_PER_FRAME]`` + - An index into ``reference_frame_ts`` representing the ordered list of + references used by inter-frame. Matches the bitstream syntax + element of the same name. + * - __u8 + - ``refresh_frame_flags`` + - Contains a bitmask that specifies which reference frame slots will be + updated with the current frame after it is decoded. + +.. _av1_frame_flags: + +``AV1 Frame Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FRAME_FLAG_SHOW_FRAME`` + - 0x00000001 + - If set, specifies that this frame should be immediately output once + decoded. If not set, specifies that this frame should not be immediately + output; it may be output later if a later uncompressed header uses + show_existing_frame equal to 1. + * - ``V4L2_AV1_FRAME_FLAG_SHOWABLE_FRAME`` + - 0x00000002 + - If set, specifies that the frame may be output using the + show_existing_frame mechanism. If not set, specifies that this frame + will not be output using the show_existing_frame mechanism. + * - ``V4L2_AV1_FRAME_FLAG_ERROR_RESILIENT_MODE`` + - 0x00000004 + - Specifies whether error resilient mode is enabled. + * - ``V4L2_AV1_FRAME_FLAG_DISABLE_CDF_UPDATE`` + - 0x00000008 + - Specifies whether the CDF update in the symbol decoding process should + be disabled. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_SCREEN_CONTENT_TOOLS`` + - 0x00000010 + - If set, indicates that intra blocks may use palette encoding. If not + set, indicates that palette encoding is never used. + * - ``V4L2_AV1_FRAME_FLAG_FORCE_INTEGER_MV`` + - 0x00000020 + - If set, specifies that motion vectors will always be integers. If not + set, specifies that motion vectors can contain fractional bits. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_INTRABC`` + - 0x00000040 + - If set, indicates that intra block copy may be used in this frame. If + not set, indicates that intra block copy is not allowed in this frame. + * - ``V4L2_AV1_FRAME_FLAG_USE_SUPERRES`` + - 0x00000080 + - If set, indicates that upscaling is needed. + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_HIGH_PRECISION_MV`` + - 0x00000100 + - If set, specifies that motion vectors are specified to eighth pel + precision. If not set, specifies that motion vectors are specified to + quarter pel precision; + * - ``V4L2_AV1_FRAME_FLAG_IS_MOTION_MODE_SWITCHABLE`` + - 0x00000200 + - If not set, specifies that only the SIMPLE motion mode will be used. + * - ``V4L2_AV1_FRAME_FLAG_USE_REF_FRAME_MVS`` + - 0x00000400 + - If set specifies that motion vector information from a previous frame + can be used when decoding the current frame. If not set, specifies that + this information will not be used. + * - ``V4L2_AV1_FRAME_FLAG_DISABLE_FRAME_END_UPDATE_CDF`` + - 0x00000800 + - If set indicates that the end of frame CDF update is disabled. If not + set, indicates that the end of frame CDF update is enabled + * - ``V4L2_AV1_FRAME_FLAG_ALLOW_WARPED_MOTION`` + - 0x00001000 + - If set, indicates that the syntax element motion_mode may be present, if + not set, indicates that the syntax element motion_mode will not be + present. + * - ``V4L2_AV1_FRAME_FLAG_REFERENCE_SELECT`` + - 0x00002000 + - If set, specifies that the mode info for inter blocks contains the + syntax element comp_mode that indicates whether to use single or + compound reference prediction. If not set, specifies that all inter + blocks will use single prediction. + * - ``V4L2_AV1_FRAME_FLAG_REDUCED_TX_SET`` + - 0x00004000 + - If set, specifies that the frame is restricted to a reduced subset of + the full set of transform types. + * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_ALLOWED`` + - 0x00008000 + - This flag retains the same meaning as SkipModeAllowed in :ref:`av1`. + * - ``V4L2_AV1_FRAME_FLAG_SKIP_MODE_PRESENT`` + - 0x00010000 + - If set, specifies that the syntax element skip_mode will be present, if + not set, specifies that skip_mode will not be used for this frame. + * - ``V4L2_AV1_FRAME_FLAG_FRAME_SIZE_OVERRIDE`` + - 0x00020000 + - If set, specifies that the frame size will either be specified as the + size of one of the reference frames, or computed from the + frame_width_minus_1 and frame_height_minus_1 syntax elements. If not + set, specifies that the frame size is equal to the size in the sequence + header. + * - ``V4L2_AV1_FRAME_FLAG_BUFFER_REMOVAL_TIME_PRESENT`` + - 0x00040000 + - If set, specifies that buffer_removal_time is present. If not set, + specifies that buffer_removal_time is not present. + * - ``V4L2_AV1_FRAME_FLAG_FRAME_REFS_SHORT_SIGNALING`` + - 0x00080000 + - If set, indicates that only two reference frames are explicitly + signaled. If not set, indicates that all reference frames are explicitly + signaled. + +``V4L2_CID_STATELESS_AV1_FILM_GRAIN (struct)`` + Represents the optional film grain parameters. See section + 6.8.20 "Film grain params semantics" of :ref:`av1` for more details. + +.. c:type:: v4l2_ctrl_av1_film_grain + +.. cssclass:: longtable + +.. tabularcolumns:: |p{1.5cm}|p{5.8cm}|p{10.0cm}| + +.. flat-table:: struct v4l2_ctrl_av1_film_grain + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - __u8 + - ``flags`` + - See :ref:`AV1 Film Grain Flags <av1_film_grain_flags>`. + * - __u8 + - ``cr_mult`` + - Represents a multiplier for the cr component used in derivation of the + input index to the cr component scaling function. + * - __u16 + - ``grain_seed`` + - Specifies the starting value for the pseudo-random numbers used during + film grain synthesis. + * - __u8 + - ``film_grain_params_ref_idx`` + - Indicates which reference frame contains the film grain parameters to be + used for this frame. + * - __u8 + - ``num_y_points`` + - Specifies the number of points for the piece-wise linear scaling + function of the luma component. + * - __u8 + - ``point_y_value[V4L2_AV1_MAX_NUM_Y_POINTS]`` + - Represents the x (luma value) coordinate for the i-th point + of the piecewise linear scaling function for luma component. The values + are signaled on the scale of 0..255. In case of 10 bit video, these + values correspond to luma values divided by 4. In case of 12 bit video, + these values correspond to luma values divided by 16. + * - __u8 + - ``point_y_scaling[V4L2_AV1_MAX_NUM_Y_POINTS]`` + - Represents the scaling (output) value for the i-th point + of the piecewise linear scaling function for luma component. + * - __u8 + - ``num_cb_points`` + - Specifies the number of points for the piece-wise linear scaling + function of the cb component. + * - __u8 + - ``point_cb_value[V4L2_AV1_MAX_NUM_CB_POINTS]`` + - Represents the x coordinate for the i-th point of the + piece-wise linear scaling function for cb component. The values are + signaled on the scale of 0..255. + * - __u8 + - ``point_cb_scaling[V4L2_AV1_MAX_NUM_CB_POINTS]`` + - Represents the scaling (output) value for the i-th point of the + piecewise linear scaling function for cb component. + * - __u8 + - ``num_cr_points`` + - Represents the number of points for the piece-wise + linear scaling function of the cr component. + * - __u8 + - ``point_cr_value[V4L2_AV1_MAX_NUM_CR_POINTS]`` + - Represents the x coordinate for the i-th point of the + piece-wise linear scaling function for cr component. The values are + signaled on the scale of 0..255. + * - __u8 + - ``point_cr_scaling[V4L2_AV1_MAX_NUM_CR_POINTS]`` + - Represents the scaling (output) value for the i-th point of the + piecewise linear scaling function for cr component. + * - __u8 + - ``grain_scaling_minus_8`` + - Represents the shift - 8 applied to the values of the chroma component. + The grain_scaling_minus_8 can take values of 0..3 and determines the + range and quantization step of the standard deviation of film grain. + * - __u8 + - ``ar_coeff_lag`` + - Specifies the number of auto-regressive coefficients for luma and + chroma. + * - __u8 + - ``ar_coeffs_y_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the Y plane. + * - __u8 + - ``ar_coeffs_cb_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the U plane. + * - __u8 + - ``ar_coeffs_cr_plus_128[V4L2_AV1_AR_COEFFS_SIZE]`` + - Specifies auto-regressive coefficients used for the V plane. + * - __u8 + - ``ar_coeff_shift_minus_6`` + - Specifies the range of the auto-regressive coefficients. Values of 0, + 1, 2, and 3 correspond to the ranges for auto-regressive coefficients of + [-2, 2), [-1, 1), [-0.5, 0.5) and [-0.25, 0.25) respectively. + * - __u8 + - ``grain_scale_shift`` + - Specifies how much the Gaussian random numbers should be scaled down + during the grain synthesis process. + * - __u8 + - ``cb_mult`` + - Represents a multiplier for the cb component used in derivation of the + input index to the cb component scaling function. + * - __u8 + - ``cb_luma_mult`` + - Represents a multiplier for the average luma component used in + derivation of the input index to the cb component scaling function.. + * - __u8 + - ``cr_luma_mult`` + - Represents a multiplier for the average luma component used in + derivation of the input index to the cr component scaling function. + * - __u16 + - ``cb_offset`` + - Represents an offset used in derivation of the input index to the + cb component scaling function. + * - __u16 + - ``cr_offset`` + - Represents an offset used in derivation of the input index to the + cr component scaling function. + * - __u8 + - ``reserved[4]`` + - Applications and drivers must set this to zero. + +.. _av1_film_grain_flags: + +``AV1 Film Grain Flags`` + +.. cssclass:: longtable + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + * - ``V4L2_AV1_FILM_GRAIN_FLAG_APPLY_GRAIN`` + - 0x00000001 + - If set, specifies that film grain should be added to this frame. If not + set, specifies that film grain should not be added. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_UPDATE_GRAIN`` + - 0x00000002 + - If set, means that a new set of parameters should be sent. If not set, + specifies that the previous set of parameters should be used. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_CHROMA_SCALING_FROM_LUMA`` + - 0x00000004 + - If set, specifies that the chroma scaling is inferred from the luma + scaling. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_OVERLAP`` + - 0x00000008 + - If set, indicates that the overlap between film grain blocks shall be + applied. If not set, indicates that the overlap between film grain blocks + shall not be applied. + * - ``V4L2_AV1_FILM_GRAIN_FLAG_CLIP_TO_RESTRICTED_RANGE`` + - 0x00000010 + - If set, indicates that clipping to the restricted (studio, i.e. limited) + range shall be applied to the sample values after adding the film grain + (see the semantics for color_range for an explanation of studio swing). + If not set, indicates that clipping to the full range shall be applied + to the sample values after adding the film grain. |