diff options
Diffstat (limited to 'Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst')
| -rw-r--r-- | Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst | 2306 |
1 files changed, 353 insertions, 1953 deletions
diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index d0d506a444b1..4a379bd9e3fb 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1,13 +1,6 @@ -.. Permission is granted to copy, distribute and/or modify this -.. document under the terms of the GNU Free Documentation License, -.. Version 1.1 or any later version published by the Free Software -.. Foundation, with no Invariant Sections, no Front-Cover Texts -.. and no Back-Cover Texts. A copy of the license is included at -.. Documentation/userspace-api/media/fdl-appendix.rst. -.. -.. TODO: replace it to GFDL-1.1-or-later WITH no-invariant-sections +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later -.. _mpeg-controls: +.. _codec-controls: *********************** Codec Control Reference @@ -33,7 +26,7 @@ Generic Codec Controls Codec Control IDs ----------------- -``V4L2_CID_MPEG_CLASS (class)`` +``V4L2_CID_CODEC_CLASS (class)`` The Codec class descriptor. Calling :ref:`VIDIOC_QUERYCTRL` for this control will return a description of this control class. This description can be @@ -399,7 +392,7 @@ enum v4l2_mpeg_audio_mode_extension - which subbands are in intensity stereo. All other subbands are coded in stereo. Layer III is not (yet) supported. Possible values are: - +.. tabularcolumns:: |p{9.1cm}|p{8.4cm}| .. flat-table:: :header-rows: 0 @@ -581,17 +574,61 @@ enum v4l2_mpeg_video_bitrate_mode - - Variable bitrate * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CBR`` - Constant bitrate + * - ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ`` + - Constant quality ``V4L2_CID_MPEG_VIDEO_BITRATE (integer)`` - Video bitrate in bits per second. + Average video bitrate in bits per second. ``V4L2_CID_MPEG_VIDEO_BITRATE_PEAK (integer)`` Peak video bitrate in bits per second. Must be larger or equal to the average video bitrate. It is ignored if the video bitrate mode is set to constant bitrate. +``V4L2_CID_MPEG_VIDEO_CONSTANT_QUALITY (integer)`` + Constant quality level control. This control is applicable when + ``V4L2_CID_MPEG_VIDEO_BITRATE_MODE`` value is + ``V4L2_MPEG_VIDEO_BITRATE_MODE_CQ``. Valid range is 1 to 100 + where 1 indicates lowest quality and 100 indicates highest quality. + Encoder will decide the appropriate quantization parameter and + bitrate to produce requested frame quality. + + +``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE (enum)`` + +enum v4l2_mpeg_video_frame_skip_mode - + Indicates in what conditions the encoder should skip frames. If + encoding a frame would cause the encoded stream to be larger then a + chosen data limit then the frame will be skipped. Possible values + are: + + +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| + +.. raw:: latex + + \small + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_DISABLED`` + - Frame skip mode is disabled. + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the chosen + level and is defined by the standard. + * - ``V4L2_MPEG_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` + - Frame skip mode enabled and buffer limit is set by the + :ref:`VBV (MPEG1/2/4) <v4l2-mpeg-video-vbv-size>` or + :ref:`CPB (H264) buffer size <v4l2-mpeg-video-h264-cpb-size>` control. + +.. raw:: latex + + \normalsize + ``V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION (integer)`` For every captured frame, skip this many subsequent frames (default 0). @@ -637,11 +674,64 @@ enum v4l2_mpeg_video_bitrate_mode - is currently displayed (decoded). This value is reset to 0 whenever the decoder is started. +``V4L2_CID_MPEG_VIDEO_DEC_CONCEAL_COLOR (integer64)`` + This control sets the conceal color in YUV color space. It describes + the client preference of the error conceal color in case of an error + where the reference frame is missing. The decoder should fill the + reference buffer with the preferred color and use it for future + decoding. The control is using 16 bits per channel. + Applicable to decoders. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - + - 8bit format + - 10bit format + - 12bit format + * - Y luminance + - Bit 0:7 + - Bit 0:9 + - Bit 0:11 + * - Cb chrominance + - Bit 16:23 + - Bit 16:25 + - Bit 16:27 + * - Cr chrominance + - Bit 32:39 + - Bit 32:41 + - Bit 32:43 + * - Must be zero + - Bit 48:63 + - Bit 48:63 + - Bit 48:63 + ``V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE (boolean)`` If enabled the decoder expects to receive a single slice per buffer, otherwise the decoder expects a single frame in per buffer. Applicable to the decoder, all codecs. +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE (boolean)`` + If the display delay is enabled then the decoder is forced to return + a CAPTURE buffer (decoded frame) after processing a certain number + of OUTPUT buffers. The delay can be set through + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY``. This + feature can be used for example for generating thumbnails of videos. + Applicable to the decoder. + +``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY (integer)`` + Display delay value for decoder. The decoder is forced to + return a decoded frame after the set 'display delay' number of + frames. If this number is low it may result in frames returned out + of display order, in addition the hardware may still be using the + returned buffer as a reference picture for subsequent frames. + +``V4L2_CID_MPEG_VIDEO_AU_DELIMITER (boolean)`` + If enabled then, AUD (Access Unit Delimiter) NALUs will be generated. + That could be useful to find the start of a frame without having to + fully parse each NALU. Applicable to the H264 and HEVC encoders. + ``V4L2_CID_MPEG_VIDEO_H264_VUI_SAR_ENABLE (boolean)`` Enable writing sample aspect ratio in the Video Usability Information. Applicable to the H264 encoder. @@ -836,7 +926,11 @@ enum v4l2_mpeg_video_h264_profile - The profile information for H264. Applicable to the H264 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -879,7 +973,9 @@ enum v4l2_mpeg_video_h264_profile - * - ``V4L2_MPEG_VIDEO_H264_PROFILE_CONSTRAINED_HIGH`` - Constrained High profile +.. raw:: latex + \normalsize .. _v4l2-mpeg-video-mpeg2-profile: @@ -890,7 +986,11 @@ enum v4l2_mpeg_video_mpeg2_profile - The profile information for MPEG2. Applicable to MPEG2 codecs. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{10.2cm}|p{7.3cm}| .. flat-table:: :header-rows: 0 @@ -910,6 +1010,9 @@ enum v4l2_mpeg_video_mpeg2_profile - - Multi-view profile (MVP) +.. raw:: latex + + \normalsize .. _v4l2-mpeg-video-mpeg4-profile: @@ -920,7 +1023,11 @@ enum v4l2_mpeg_video_mpeg4_profile - The profile information for MPEG4. Applicable to the MPEG4 encoder. Possible values are: +.. raw:: latex + + \small +.. tabularcolumns:: |p{11.8cm}|p{5.7cm}| .. flat-table:: :header-rows: 0 @@ -935,9 +1042,11 @@ enum v4l2_mpeg_video_mpeg4_profile - * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_SIMPLE_SCALABLE`` - Simple Scalable profile * - ``V4L2_MPEG_VIDEO_MPEG4_PROFILE_ADVANCED_CODING_EFFICIENCY`` - - + - Advanced Coding Efficiency profile +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_VIDEO_MAX_REF_PIC (integer)`` The maximum number of reference pictures used for encoding. @@ -993,7 +1102,7 @@ enum v4l2_mpeg_video_h264_loop_filter_mode - \small -.. tabularcolumns:: |p{13.6cm}|p{3.9cm}| +.. tabularcolumns:: |p{13.5cm}|p{4.0cm}| .. flat-table:: :header-rows: 0 @@ -1065,7 +1174,46 @@ enum v4l2_mpeg_video_h264_entropy_mode - Cyclic intra macroblock refresh. This is the number of continuous macroblocks refreshed every frame. Each frame a successive set of macroblocks is refreshed until the cycle completes and starts from - the top of the frame. Applicable to H264, H263 and MPEG4 encoder. + the top of the frame. Setting this control to zero means that + macroblocks will not be refreshed. Note that this control will not + take effect when ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD`` control + is set to non zero value. + Applicable to H264, H263 and MPEG4 encoder. + +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE (enum)`` + +enum v4l2_mpeg_video_intra_refresh_period_type - + Sets the type of intra refresh. The period to refresh + the whole frame is specified by V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD. + Note that if this control is not present, then it is undefined what + refresh type is used and it is up to the driver to decide. + Applicable to H264 and HEVC encoders. Possible values are: + +.. tabularcolumns:: |p{9.6cm}|p{7.9cm}| + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_RANDOM`` + - The whole frame is completely refreshed randomly + after the specified period. + * - ``V4L2_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE_CYCLIC`` + - The whole frame MBs are completely refreshed in cyclic order + after the specified period. + +``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)`` + Intra macroblock refresh period. This sets the period to refresh + the whole frame. In other words, this defines the number of frames + for which the whole frame will be intra-refreshed. An example: + setting period to 1 means that the whole frame will be refreshed, + setting period to 2 means that the half of macroblocks will be + intra-refreshed on frameX and the other half of macroblocks + will be refreshed in frameX + 1 and so on. Setting the period to + zero means no period is specified. + Note that if the client sets this control to non zero value the + ``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB`` control shall be + ignored. Applicable to H264 and HEVC encoders. ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)`` Frame level rate control enable. If this control is disabled then @@ -1145,6 +1293,18 @@ enum v4l2_mpeg_video_h264_entropy_mode - V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter should be chosen to meet both requirements. +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_H264_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the H264 B frame to limit B frame + quality to a range. Valid range: from 0 to 51. If + V4L2_CID_MPEG_VIDEO_H264_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (integer)`` Quantization parameter for an I frame for MPEG4. Valid range: from 1 to 31. @@ -1163,6 +1323,8 @@ enum v4l2_mpeg_video_h264_entropy_mode - Quantization parameter for an B frame for MPEG4. Valid range: from 1 to 31. +.. _v4l2-mpeg-video-vbv-size: + ``V4L2_CID_MPEG_VIDEO_VBV_SIZE (integer)`` The Video Buffer Verifier size in kilobytes, it is used as a limitation of frame skip. The VBV is defined in the standard as a @@ -1200,6 +1362,8 @@ enum v4l2_mpeg_video_h264_entropy_mode - Force a key frame for the next queued buffer. Applicable to encoders. This is a general, codec-agnostic keyframe control. +.. _v4l2-mpeg-video-h264-cpb-size: + ``V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE (integer)`` The Coded Picture Buffer size in kilobytes, it is used as a limitation of frame skip. The CPB is defined in the H264 standard as @@ -1372,7 +1536,7 @@ enum v4l2_mpeg_video_h264_fmo_change_dir - Specifies a direction of the slice group change for raster and wipe maps. Applicable to the H264 encoder. Possible values are: - +.. tabularcolumns:: |p{9.6cm}|p{7.9cm}| .. flat-table:: :header-rows: 0 @@ -1460,882 +1624,26 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - * - Bit 16:32 - Layer number +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L0_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 0 for H264 encoder. -.. _v4l2-mpeg-h264: - -``V4L2_CID_MPEG_VIDEO_H264_SPS (struct)`` - Specifies the sequence parameter set (as extracted from the - bitstream) for the associated H264 slice data. This includes the - necessary parameters for configuring a stateless hardware decoding - pipeline for H264. The bitstream parameters are defined according - to :ref:`h264`, section 7.4.2.1.1 "Sequence Parameter Set Data - Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_sps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_sps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``profile_idc`` - - - * - __u8 - - ``constraint_set_flags`` - - See :ref:`Sequence Parameter Set Constraints Set Flags <h264_sps_constraints_set_flags>` - * - __u8 - - ``level_idc`` - - - * - __u8 - - ``seq_parameter_set_id`` - - - * - __u8 - - ``chroma_format_idc`` - - - * - __u8 - - ``bit_depth_luma_minus8`` - - - * - __u8 - - ``bit_depth_chroma_minus8`` - - - * - __u8 - - ``log2_max_frame_num_minus4`` - - - * - __u8 - - ``pic_order_cnt_type`` - - - * - __u8 - - ``log2_max_pic_order_cnt_lsb_minus4`` - - - * - __u8 - - ``max_num_ref_frames`` - - - * - __u8 - - ``num_ref_frames_in_pic_order_cnt_cycle`` - - - * - __s32 - - ``offset_for_ref_frame[255]`` - - - * - __s32 - - ``offset_for_non_ref_pic`` - - - * - __s32 - - ``offset_for_top_to_bottom_field`` - - - * - __u16 - - ``pic_width_in_mbs_minus1`` - - - * - __u16 - - ``pic_height_in_map_units_minus1`` - - - * - __u32 - - ``flags`` - - See :ref:`Sequence Parameter Set Flags <h264_sps_flags>` - -.. _h264_sps_constraints_set_flags: - -``Sequence Parameter Set Constraints Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SPS_CONSTRAINT_SET0_FLAG`` - - 0x00000001 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET1_FLAG`` - - 0x00000002 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET2_FLAG`` - - 0x00000004 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET3_FLAG`` - - 0x00000008 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET4_FLAG`` - - 0x00000010 - - - * - ``V4L2_H264_SPS_CONSTRAINT_SET5_FLAG`` - - 0x00000020 - - - -.. _h264_sps_flags: - -``Sequence Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE`` - - 0x00000001 - - - * - ``V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS`` - - 0x00000002 - - - * - ``V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO`` - - 0x00000004 - - - * - ``V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED`` - - 0x00000008 - - - * - ``V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY`` - - 0x00000010 - - - * - ``V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD`` - - 0x00000020 - - - * - ``V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE`` - - 0x00000040 - - - -``V4L2_CID_MPEG_VIDEO_H264_PPS (struct)`` - Specifies the picture parameter set (as extracted from the - bitstream) for the associated H264 slice data. This includes the - necessary parameters for configuring a stateless hardware decoding - pipeline for H264. The bitstream parameters are defined according - to :ref:`h264`, section 7.4.2.2 "Picture Parameter Set RBSP - Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_pps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_pps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``pic_parameter_set_id`` - - - * - __u8 - - ``seq_parameter_set_id`` - - - * - __u8 - - ``num_slice_groups_minus1`` - - - * - __u8 - - ``num_ref_idx_l0_default_active_minus1`` - - - * - __u8 - - ``num_ref_idx_l1_default_active_minus1`` - - - * - __u8 - - ``weighted_bipred_idc`` - - - * - __s8 - - ``pic_init_qp_minus26`` - - - * - __s8 - - ``pic_init_qs_minus26`` - - - * - __s8 - - ``chroma_qp_index_offset`` - - - * - __s8 - - ``second_chroma_qp_index_offset`` - - - * - __u16 - - ``flags`` - - See :ref:`Picture Parameter Set Flags <h264_pps_flags>` - -.. _h264_pps_flags: - -``Picture Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE`` - - 0x00000001 - - - * - ``V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT`` - - 0x00000002 - - - * - ``V4L2_H264_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000004 - - - * - ``V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT`` - - 0x00000008 - - - * - ``V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 - - - * - ``V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT`` - - 0x00000020 - - - * - ``V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE`` - - 0x00000040 - - - * - ``V4L2_H264_PPS_FLAG_PIC_SCALING_MATRIX_PRESENT`` - - 0x00000080 - - - -``V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (struct)`` - Specifies the scaling matrix (as extracted from the bitstream) for - the associated H264 slice data. The bitstream parameters are - defined according to :ref:`h264`, section 7.4.2.1.1.1 "Scaling - List Semantics". For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_scaling_matrix - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_scaling_matrix - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``scaling_list_4x4[6][16]`` - - Scaling matrix after applying the inverse scanning process. - Expected list order is Intra Y, Intra Cb, Intra Cr, Inter Y, - Inter Cb, Inter Cr. - * - __u8 - - ``scaling_list_8x8[6][64]`` - - Scaling matrix after applying the inverse scanning process. - Expected list order is Intra Y, Inter Y, Intra Cb, Inter Cb, - Intra Cr, Inter Cr. - -``V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (struct)`` - Specifies the slice parameters (as extracted from the bitstream) - for the associated H264 slice data. This includes the necessary - parameters for configuring a stateless hardware decoding pipeline - for H264. The bitstream parameters are defined according to - :ref:`h264`, section 7.4.3 "Slice Header Semantics". For further - documentation, refer to the above specification, unless there is - an explicit comment stating otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API - and it is expected to change. - - This structure is expected to be passed as an array, with one - entry for each slice included in the bitstream buffer. - -.. c:type:: v4l2_ctrl_h264_slice_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_h264_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``size`` - - - * - __u32 - - ``start_byte_offset`` - Offset (in bytes) from the beginning of the OUTPUT buffer to the start - of the slice. If the slice starts with a start code, then this is the - offset to such start code. When operating in slice-based decoding mode - (see :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field should - be set to 0. When operating in frame-based decoding mode, this field - should be 0 for the first slice. - * - __u32 - - ``header_bit_size`` - - - * - __u16 - - ``first_mb_in_slice`` - - - * - __u8 - - ``slice_type`` - - - * - __u8 - - ``pic_parameter_set_id`` - - - * - __u8 - - ``colour_plane_id`` - - - * - __u8 - - ``redundant_pic_cnt`` - - - * - __u16 - - ``frame_num`` - - - * - __u16 - - ``idr_pic_id`` - - - * - __u16 - - ``pic_order_cnt_lsb`` - - - * - __s32 - - ``delta_pic_order_cnt_bottom`` - - - * - __s32 - - ``delta_pic_order_cnt0`` - - - * - __s32 - - ``delta_pic_order_cnt1`` - - - * - struct :c:type:`v4l2_h264_pred_weight_table` - - ``pred_weight_table`` - - - * - __u32 - - ``dec_ref_pic_marking_bit_size`` - - Size in bits of the dec_ref_pic_marking() syntax element. - * - __u32 - - ``pic_order_cnt_bit_size`` - - - * - __u8 - - ``cabac_init_idc`` - - - * - __s8 - - ``slice_qp_delta`` - - - * - __s8 - - ``slice_qs_delta`` - - - * - __u8 - - ``disable_deblocking_filter_idc`` - - - * - __s8 - - ``slice_alpha_c0_offset_div2`` - - - * - __s8 - - ``slice_beta_offset_div2`` - - - * - __u8 - - ``num_ref_idx_l0_active_minus1`` - - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l0_default_active_minus1. - * - __u8 - - ``num_ref_idx_l1_active_minus1`` - - If num_ref_idx_active_override_flag is not set, this field must be - set to the value of num_ref_idx_l1_default_active_minus1. - * - __u32 - - ``slice_group_change_cycle`` - - - * - __u8 - - ``ref_pic_list0[32]`` - - Reference picture list after applying the per-slice modifications - * - __u8 - - ``ref_pic_list1[32]`` - - Reference picture list after applying the per-slice modifications - * - __u32 - - ``flags`` - - See :ref:`Slice Parameter Flags <h264_slice_flags>` - -.. _h264_slice_flags: - -``Slice Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_SLICE_FLAG_FIELD_PIC`` - - 0x00000001 - - - * - ``V4L2_H264_SLICE_FLAG_BOTTOM_FIELD`` - - 0x00000002 - - - * - ``V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED`` - - 0x00000004 - - - * - ``V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH`` - - 0x00000008 - - - -``Prediction Weight Table`` - - The bitstream parameters are defined according to :ref:`h264`, - section 7.4.3.2 "Prediction Weight Table Semantics". For further - documentation, refer to the above specification, unless there is - an explicit comment stating otherwise. +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L1_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 1 for H264 encoder. -.. c:type:: v4l2_h264_pred_weight_table +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L2_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 2 for H264 encoder. -.. cssclass:: longtable +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L3_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 3 for H264 encoder. -.. flat-table:: struct v4l2_h264_pred_weight_table - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u16 - - ``luma_log2_weight_denom`` - - - * - __u16 - - ``chroma_log2_weight_denom`` - - - * - struct :c:type:`v4l2_h264_weight_factors` - - ``weight_factors[2]`` - - The weight factors at index 0 are the weight factors for the reference - list 0, the one at index 1 for the reference list 1. - -.. c:type:: v4l2_h264_weight_factors - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_h264_weight_factors - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s16 - - ``luma_weight[32]`` - - - * - __s16 - - ``luma_offset[32]`` - - - * - __s16 - - ``chroma_weight[32][2]`` - - - * - __s16 - - ``chroma_offset[32][2]`` - - - -``V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (struct)`` - Specifies the decode parameters (as extracted from the bitstream) - for the associated H264 slice data. This includes the necessary - parameters for configuring a stateless hardware decoding pipeline - for H264. The bitstream parameters are defined according to - :ref:`h264`. For further documentation, refer to the above - specification, unless there is an explicit comment stating - otherwise. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_h264_decode_params - -.. cssclass:: longtable +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L4_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 4 for H264 encoder. -.. flat-table:: struct v4l2_ctrl_h264_decode_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - struct :c:type:`v4l2_h264_dpb_entry` - - ``dpb[16]`` - - - * - __u16 - - ``num_slices`` - - Number of slices needed to decode the current frame/field. When - operating in slice-based decoding mode (see - :c:type:`v4l2_mpeg_video_h264_decode_mode`), this field - should always be set to one. - * - __u16 - - ``nal_ref_idc`` - - NAL reference ID value coming from the NAL Unit header - * - __s32 - - ``top_field_order_cnt`` - - Picture Order Count for the coded top field - * - __s32 - - ``bottom_field_order_cnt`` - - Picture Order Count for the coded bottom field - * - __u32 - - ``flags`` - - See :ref:`Decode Parameters Flags <h264_decode_params_flags>` - -.. _h264_decode_params_flags: - -``Decode Parameters Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC`` - - 0x00000001 - - That picture is an IDR picture +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L5_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 5 for H264 encoder. -.. c:type:: v4l2_h264_dpb_entry - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_h264_dpb_entry - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``reference_ts`` - - Timestamp of the V4L2 capture buffer to use as reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u16 - - ``frame_num`` - - - * - __u16 - - ``pic_num`` - - - * - __s32 - - ``top_field_order_cnt`` - - - * - __s32 - - ``bottom_field_order_cnt`` - - - * - __u32 - - ``flags`` - - See :ref:`DPB Entry Flags <h264_dpb_flags>` - -.. _h264_dpb_flags: - -``DPB Entries Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_H264_DPB_ENTRY_FLAG_VALID`` - - 0x00000001 - - The DPB entry is valid and should be considered - * - ``V4L2_H264_DPB_ENTRY_FLAG_ACTIVE`` - - 0x00000002 - - The DPB entry is currently being used as a reference frame - * - ``V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM`` - - 0x00000004 - - The DPB entry is a long term reference frame - * - ``V4L2_H264_DPB_ENTRY_FLAG_FIELD`` - - 0x00000008 - - The DPB entry is a field reference, which means only one of the field - will be used when decoding the new frame/field. When not set the DPB - entry is a frame reference (both fields will be used). Note that this - flag does not say anything about the number of fields contained in the - reference frame, it just describes the one used to decode the new - field/frame - * - ``V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD`` - - 0x00000010 - - The DPB entry is a bottom field reference (only the bottom field of the - reference frame is needed to decode the new frame/field). Only valid if - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set. When - V4L2_H264_DPB_ENTRY_FLAG_FIELD is set but - V4L2_H264_DPB_ENTRY_FLAG_BOTTOM_FIELD is not, that means the - DPB entry is a top field reference - -``V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (enum)`` - Specifies the decoding mode to use. Currently exposes slice-based and - frame-based decoding but new modes might be added later on. - This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE - pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE - are required to set this control in order to specify the decoding mode - that is expected for the buffer. - Drivers may expose a single or multiple decoding modes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_h264_decode_mode - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED`` - - 0 - - Decoding is done at the slice granularity. - In this mode, ``num_slices`` field in struct - :c:type:`v4l2_ctrl_h264_decode_params` should be set to 1, - and ``start_byte_offset`` in struct - :c:type:`v4l2_ctrl_h264_slice_params` should be set to 0. - The OUTPUT buffer must contain a single slice. - * - ``V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED`` - - 1 - - Decoding is done at the frame granularity. - In this mode, ``num_slices`` field in struct - :c:type:`v4l2_ctrl_h264_decode_params` should be set to the number - of slices in the frame, and ``start_byte_offset`` in struct - :c:type:`v4l2_ctrl_h264_slice_params` should be set accordingly - for each slice. For the first slice, ``start_byte_offset`` should - be zero. - The OUTPUT buffer must contain all slices needed to decode the - frame. The OUTPUT buffer must also contain both fields. - -``V4L2_CID_MPEG_VIDEO_H264_START_CODE (enum)`` - Specifies the H264 slice start code expected for each slice. - This control is used as a modifier for V4L2_PIX_FMT_H264_SLICE - pixel format. Applications that support V4L2_PIX_FMT_H264_SLICE - are required to set this control in order to specify the start code - that is expected for the buffer. - Drivers may expose a single or multiple start codes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_h264_start_code - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_H264_START_CODE_NONE`` - - 0 - - Selecting this value specifies that H264 slices are passed - to the driver without any start code. - * - ``V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B`` - - 1 - - Selecting this value specifies that H264 slices are expected - to be prefixed by Annex B start codes. According to :ref:`h264` - valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. - -.. _v4l2-mpeg-mpeg2: - -``V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (struct)`` - Specifies the slice parameters (as extracted from the bitstream) for the - associated MPEG-2 slice data. This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for MPEG-2. - The bitstream parameters are defined according to :ref:`mpeg2part2`. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_mpeg2_slice_params - -.. cssclass:: longtable - -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| - -.. flat-table:: struct v4l2_ctrl_mpeg2_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``bit_size`` - - Size (in bits) of the current slice data. - * - __u32 - - ``data_bit_offset`` - - Offset (in bits) to the video data in the current slice data. - * - struct :c:type:`v4l2_mpeg2_sequence` - - ``sequence`` - - Structure with MPEG-2 sequence metadata, merging relevant fields from - the sequence header and sequence extension parts of the bitstream. - * - struct :c:type:`v4l2_mpeg2_picture` - - ``picture`` - - Structure with MPEG-2 picture metadata, merging relevant fields from - the picture header and picture coding extension parts of the bitstream. - * - __u64 - - ``backward_ref_ts`` - - Timestamp of the V4L2 capture buffer to use as backward reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``forward_ref_ts`` - - Timestamp for the V4L2 capture buffer to use as forward reference, used - with B-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u32 - - ``quantiser_scale_code`` - - Code used to determine the quantization scale to use for the IDCT. - -.. c:type:: v4l2_mpeg2_sequence - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_mpeg2_sequence - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u16 - - ``horizontal_size`` - - The width of the displayable part of the frame's luminance component. - * - __u16 - - ``vertical_size`` - - The height of the displayable part of the frame's luminance component. - * - __u32 - - ``vbv_buffer_size`` - - Used to calculate the required size of the video buffering verifier, - defined (in bits) as: 16 * 1024 * vbv_buffer_size. - * - __u16 - - ``profile_and_level_indication`` - - The current profile and level indication as extracted from the - bitstream. - * - __u8 - - ``progressive_sequence`` - - Indication that all the frames for the sequence are progressive instead - of interlaced. - * - __u8 - - ``chroma_format`` - - The chrominance sub-sampling format (1: 4:2:0, 2: 4:2:2, 3: 4:4:4). - -.. c:type:: v4l2_mpeg2_picture - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_mpeg2_picture - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``picture_coding_type`` - - Picture coding type for the frame covered by the current slice - (V4L2_MPEG2_PICTURE_CODING_TYPE_I, V4L2_MPEG2_PICTURE_CODING_TYPE_P or - V4L2_MPEG2_PICTURE_CODING_TYPE_B). - * - __u8 - - ``f_code[2][2]`` - - Motion vector codes. - * - __u8 - - ``intra_dc_precision`` - - Precision of Discrete Cosine transform (0: 8 bits precision, - 1: 9 bits precision, 2: 10 bits precision, 3: 11 bits precision). - * - __u8 - - ``picture_structure`` - - Picture structure (1: interlaced top field, 2: interlaced bottom field, - 3: progressive frame). - * - __u8 - - ``top_field_first`` - - If set to 1 and interlaced stream, top field is output first. - * - __u8 - - ``frame_pred_frame_dct`` - - If set to 1, only frame-DCT and frame prediction are used. - * - __u8 - - ``concealment_motion_vectors`` - - If set to 1, motion vectors are coded for intra macroblocks. - * - __u8 - - ``q_scale_type`` - - This flag affects the inverse quantization process. - * - __u8 - - ``intra_vlc_format`` - - This flag affects the decoding of transform coefficient data. - * - __u8 - - ``alternate_scan`` - - This flag affects the decoding of transform coefficient data. - * - __u8 - - ``repeat_first_field`` - - This flag affects the decoding process of progressive frames. - * - __u16 - - ``progressive_frame`` - - Indicates whether the current frame is progressive. - -``V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (struct)`` - Specifies quantization matrices (as extracted from the bitstream) for the - associated MPEG-2 slice data. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_mpeg2_quantization - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.2cm}|p{8.0cm}|p{7.4cm}| - -.. raw:: latex - - \small - -.. flat-table:: struct v4l2_ctrl_mpeg2_quantization - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``load_intra_quantiser_matrix`` - - One bit to indicate whether to load the ``intra_quantiser_matrix`` data. - * - __u8 - - ``load_non_intra_quantiser_matrix`` - - One bit to indicate whether to load the ``non_intra_quantiser_matrix`` - data. - * - __u8 - - ``load_chroma_intra_quantiser_matrix`` - - One bit to indicate whether to load the - ``chroma_intra_quantiser_matrix`` data, only relevant for non-4:2:0 YUV - formats. - * - __u8 - - ``load_chroma_non_intra_quantiser_matrix`` - - One bit to indicate whether to load the - ``chroma_non_intra_quantiser_matrix`` data, only relevant for non-4:2:0 - YUV formats. - * - __u8 - - ``intra_quantiser_matrix[64]`` - - The quantization matrix coefficients for intra-coded frames, in zigzag - scanning order. It is relevant for both luma and chroma components, - although it can be superseded by the chroma-specific matrix for - non-4:2:0 YUV formats. - * - __u8 - - ``non_intra_quantiser_matrix[64]`` - - The quantization matrix coefficients for non-intra-coded frames, in - zigzag scanning order. It is relevant for both luma and chroma - components, although it can be superseded by the chroma-specific matrix - for non-4:2:0 YUV formats. - * - __u8 - - ``chroma_intra_quantiser_matrix[64]`` - - The quantization matrix coefficients for the chominance component of - intra-coded frames, in zigzag scanning order. Only relevant for - non-4:2:0 YUV formats. - * - __u8 - - ``chroma_non_intra_quantiser_matrix[64]`` - - The quantization matrix coefficients for the chrominance component of - non-intra-coded frames, in zigzag scanning order. Only relevant for - non-4:2:0 YUV formats. +``V4L2_CID_MPEG_VIDEO_H264_HIER_CODING_L6_BR (integer)`` + Indicates bit rate (bps) for hierarchical coding layer 6 for H264 encoder. ``V4L2_CID_FWHT_I_FRAME_QP (integer)`` Quantization parameter for an I frame for FWHT. Valid range: from 1 @@ -2345,328 +1653,19 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type - Quantization parameter for a P frame for FWHT. Valid range: from 1 to 31. -.. _v4l2-mpeg-vp8: - -``V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (struct)`` - Specifies the frame parameters for the associated VP8 parsed frame data. - This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for VP8. - The bitstream parameters are defined according to :ref:`vp8`. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_vp8_frame_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{5.8cm}|p{4.8cm}|p{6.6cm}| - -.. flat-table:: struct v4l2_ctrl_vp8_frame_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - struct :c:type:`v4l2_vp8_segment_header` - - ``segment_header`` - - Structure with segment-based adjustments metadata. - * - struct :c:type:`v4l2_vp8_loopfilter_header` - - ``loopfilter_header`` - - Structure with loop filter level adjustments metadata. - * - struct :c:type:`v4l2_vp8_quantization_header` - - ``quant_header`` - - Structure with VP8 dequantization indices metadata. - * - struct :c:type:`v4l2_vp8_entropy_header` - - ``entropy_header`` - - Structure with VP8 entropy coder probabilities metadata. - * - struct :c:type:`v4l2_vp8_entropy_coder_state` - - ``coder_state`` - - Structure with VP8 entropy coder state. - * - __u16 - - ``width`` - - The width of the frame. Must be set for all frames. - * - __u16 - - ``height`` - - The height of the frame. Must be set for all frames. - * - __u8 - - ``horizontal_scale`` - - Horizontal scaling factor. - * - __u8 - - ``vertical_scaling factor`` - - Vertical scale. - * - __u8 - - ``version`` - - Bitstream version. - * - __u8 - - ``prob_skip_false`` - - Indicates the probability that the macroblock is not skipped. - * - __u8 - - ``prob_intra`` - - Indicates the probability that a macroblock is intra-predicted. - * - __u8 - - ``prob_last`` - - Indicates the probability that the last reference frame is used - for inter-prediction - * - __u8 - - ``prob_gf`` - - Indicates the probability that the golden reference frame is used - for inter-prediction - * - __u8 - - ``num_dct_parts`` - - Number of DCT coefficients partitions. Must be one of: 1, 2, 4, or 8. - * - __u32 - - ``first_part_size`` - - Size of the first partition, i.e. the control partition. - * - __u32 - - ``first_part_header_bits`` - - Size in bits of the first partition header portion. - * - __u32 - - ``dct_part_sizes[8]`` - - DCT coefficients sizes. - * - __u64 - - ``last_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``golden_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as last reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``alt_frame_ts`` - - Timestamp for the V4L2 capture buffer to use as alternate reference frame, used - with inter-coded frames. The timestamp refers to the ``timestamp`` field in - struct :c:type:`v4l2_buffer`. Use the :c:func:`v4l2_timeval_to_ns()` - function to convert the struct :c:type:`timeval` in struct - :c:type:`v4l2_buffer` to a __u64. - * - __u64 - - ``flags`` - - See :ref:`Frame Header Flags <vp8_frame_header_flags>` - -.. _vp8_frame_header_flags: - -``Frame Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME`` - - 0x01 - - Indicates if the frame is a key frame. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL`` - - 0x02 - - Experimental bitstream. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME`` - - 0x04 - - Show frame flag, indicates if the frame is for display. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF`` - - 0x08 - - Enable/disable skipping of macroblocks with no non-zero coefficients. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN`` - - 0x10 - - Sign of motion vectors when the golden frame is referenced. - * - ``V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT`` - - 0x20 - - Sign of motion vectors when the alt frame is referenced. - -.. c:type:: v4l2_vp8_entropy_coder_state - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_coder_state - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``range`` - - - * - __u8 - - ``value`` - - - * - __u8 - - ``bit_count`` - - - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_segment_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_segment_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``quant_update[4]`` - - Signed quantizer value update. - * - __s8 - - ``lf_update[4]`` - - Signed loop filter level value update. - * - __u8 - - ``segment_probs[3]`` - - Segment probabilities. - * - __u8 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Segment Header Flags <vp8_segment_header_flags>` - -.. _vp8_segment_header_flags: - -``Segment Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED`` - - 0x01 - - Enable/disable segment-based adjustments. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP`` - - 0x02 - - Indicates if the macroblock segmentation map is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA`` - - 0x04 - - Indicates if the segment feature data is updated in this frame. - * - ``V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE`` - - 0x08 - - If is set, the segment feature data mode is delta-value. - If cleared, it's absolute-value. - -.. c:type:: v4l2_vp8_loopfilter_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_loopfilter_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __s8 - - ``ref_frm_delta[4]`` - - Reference adjustment (signed) delta value. - * - __s8 - - ``mb_mode_delta[4]`` - - Macroblock prediction mode adjustment (signed) delta value. - * - __u8 - - ``sharpness_level`` - - Sharpness level - * - __u8 - - ``level`` - - Filter level - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - * - __u32 - - ``flags`` - - See :ref:`Loopfilter Header Flags <vp8_loopfilter_header_flags>` - -.. _vp8_loopfilter_header_flags: - -``Loopfilter Header Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_VP8_LF_HEADER_ADJ_ENABLE`` - - 0x01 - - Enable/disable macroblock-level loop filter adjustment. - * - ``V4L2_VP8_LF_HEADER_DELTA_UPDATE`` - - 0x02 - - Indicates if the delta values used in an adjustment are updated. - * - ``V4L2_VP8_LF_FILTER_TYPE_SIMPLE`` - - 0x04 - - If set, indicates the filter type is simple. - If cleared, the filter type is normal. - -.. c:type:: v4l2_vp8_quantization_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_quantization_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``y_ac_qi`` - - Luma AC coefficient table index. - * - __s8 - - ``y_dc_delta`` - - Luma DC delta vaue. - * - __s8 - - ``y2_dc_delta`` - - Y2 block DC delta value. - * - __s8 - - ``y2_ac_delta`` - - Y2 block AC delta value. - * - __s8 - - ``uv_dc_delta`` - - Chroma DC delta value. - * - __s8 - - ``uv_ac_delta`` - - Chroma AC delta value. - * - __u16 - - ``padding`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_vp8_entropy_header - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.5cm}|p{6.3cm}|p{9.4cm}| - -.. flat-table:: struct v4l2_vp8_entropy_header - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``coeff_probs[4][8][3][11]`` - - Coefficient update probabilities. - * - __u8 - - ``y_mode_probs[4]`` - - Luma mode update probabilities. - * - __u8 - - ``uv_mode_probs[3]`` - - Chroma mode update probabilities. - * - __u8 - - ``mv_probs[2][19]`` - - MV decoding update probabilities. - * - __u8 - - ``padding[3]`` - - Applications and drivers must set this to zero. +``V4L2_CID_MPEG_VIDEO_AVERAGE_QP (integer)`` + This read-only control returns the average QP value of the currently + encoded frame. The value applies to the last dequeued capture buffer + (VIDIOC_DQBUF). Its valid range depends on the encoding format and parameters. + For H264, its valid range is from 0 to 51. + For HEVC, its valid range is from 0 to 51 for 8 bit and + from 0 to 63 for 10 bit. + For H263 and MPEG4, its valid range is from 1 to 31. + For VP8, its valid range is from 0 to 127. + For VP9, its valid range is from 0 to 255. + If the codec's MIN_QP and MAX_QP are set, then the QP will meet both requirements. + Codecs need to always use the specified range, rather then a HW custom range. + Applicable to encoders .. raw:: latex @@ -2694,6 +1693,11 @@ MFC 5.1 Control IDs feature can be used for example for generating thumbnails of videos. Applicable to the H264 decoder. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY (integer)`` Display delay value for H264 decoder. The decoder is forced to return a decoded frame after the set 'display delay' number of @@ -2701,6 +1705,11 @@ MFC 5.1 Control IDs of display order, in addition the hardware may still be using the returned buffer as a reference picture for subsequent frames. + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY`` control instead. + ``V4L2_CID_MPEG_MFC51_VIDEO_H264_NUM_REF_PIC_FOR_P (integer)`` The number of reference pictures used for encoding a P picture. Applicable to the H264 encoder. @@ -2773,6 +1782,11 @@ MFC 5.1 Control IDs ``V4L2_CID_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE`` (enum) + .. note:: + + This control is deprecated. Use the standard + ``V4L2_CID_MPEG_VIDEO_FRAME_SKIP_MODE`` control instead. + enum v4l2_mpeg_mfc51_video_frame_skip_mode - Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then a @@ -2780,7 +1794,7 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - are: -.. tabularcolumns:: |p{9.2cm}|p{8.3cm}| +.. tabularcolumns:: |p{9.4cm}|p{8.1cm}| .. raw:: latex @@ -2790,12 +1804,12 @@ enum v4l2_mpeg_mfc51_video_frame_skip_mode - :header-rows: 0 :stub-columns: 0 - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_DISABLED`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_DISABLED`` - Frame skip mode is disabled. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_LEVEL_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_LEVEL_LIMIT`` - Frame skip mode enabled and buffer limit is set by the chosen level and is defined by the standard. - * - ``V4L2_MPEG_MFC51_FRAME_SKIP_MODE_BUF_LIMIT`` + * - ``V4L2_MPEG_MFC51_VIDEO_FRAME_SKIP_MODE_BUF_LIMIT`` - Frame skip mode enabled and buffer limit is set by the VBV (MPEG1/2/4) or CPB (H264) buffer size control. @@ -2824,7 +1838,7 @@ enum v4l2_mpeg_mfc51_video_force_frame_type - Force a frame type for the next queued buffer. Applicable to encoders. Possible values are: -.. tabularcolumns:: |p{9.5cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.9cm}|p{7.6cm}| .. flat-table:: :header-rows: 0 @@ -2838,127 +1852,6 @@ enum v4l2_mpeg_mfc51_video_force_frame_type - - Force a non-coded frame. -.. _v4l2-mpeg-fwht: - -``V4L2_CID_MPEG_VIDEO_FWHT_PARAMS (struct)`` - Specifies the fwht parameters (as extracted from the bitstream) for the - associated FWHT data. This includes the necessary parameters for - configuring a stateless hardware decoding pipeline for FWHT. - - .. note:: - - This compound control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_ctrl_fwht_params - -.. cssclass:: longtable - -.. tabularcolumns:: |p{1.4cm}|p{4.3cm}|p{11.8cm}| - -.. flat-table:: struct v4l2_ctrl_fwht_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``backward_ref_ts`` - - Timestamp of the V4L2 capture buffer to use as backward reference, used - with P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u32 - - ``version`` - - The version of the codec - * - __u32 - - ``width`` - - The width of the frame - * - __u32 - - ``height`` - - The height of the frame - * - __u32 - - ``flags`` - - The flags of the frame, see :ref:`fwht-flags`. - * - __u32 - - ``colorspace`` - - The colorspace of the frame, from enum :c:type:`v4l2_colorspace`. - * - __u32 - - ``xfer_func`` - - The transfer function, from enum :c:type:`v4l2_xfer_func`. - * - __u32 - - ``ycbcr_enc`` - - The Y'CbCr encoding, from enum :c:type:`v4l2_ycbcr_encoding`. - * - __u32 - - ``quantization`` - - The quantization range, from enum :c:type:`v4l2_quantization`. - - - -.. _fwht-flags: - -FWHT Flags -============ - -.. cssclass:: longtable - -.. tabularcolumns:: |p{6.8cm}|p{2.4cm}|p{8.3cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 3 1 4 - - * - ``FWHT_FL_IS_INTERLACED`` - - 0x00000001 - - Set if this is an interlaced format - * - ``FWHT_FL_IS_BOTTOM_FIRST`` - - 0x00000002 - - Set if this is a bottom-first (NTSC) interlaced format - * - ``FWHT_FL_IS_ALTERNATE`` - - 0x00000004 - - Set if each 'frame' contains just one field - * - ``FWHT_FL_IS_BOTTOM_FIELD`` - - 0x00000008 - - If FWHT_FL_IS_ALTERNATE was set, then this is set if this 'frame' is the - bottom field, else it is the top field. - * - ``FWHT_FL_LUMA_IS_UNCOMPRESSED`` - - 0x00000010 - - Set if the luma plane is uncompressed - * - ``FWHT_FL_CB_IS_UNCOMPRESSED`` - - 0x00000020 - - Set if the cb plane is uncompressed - * - ``FWHT_FL_CR_IS_UNCOMPRESSED`` - - 0x00000040 - - Set if the cr plane is uncompressed - * - ``FWHT_FL_CHROMA_FULL_HEIGHT`` - - 0x00000080 - - Set if the chroma plane has the same height as the luma plane, - else the chroma plane is half the height of the luma plane - * - ``FWHT_FL_CHROMA_FULL_WIDTH`` - - 0x00000100 - - Set if the chroma plane has the same width as the luma plane, - else the chroma plane is half the width of the luma plane - * - ``FWHT_FL_ALPHA_IS_UNCOMPRESSED`` - - 0x00000200 - - Set if the alpha plane is uncompressed - * - ``FWHT_FL_I_FRAME`` - - 0x00000400 - - Set if this is an I-frame - * - ``FWHT_FL_COMPONENTS_NUM_MSK`` - - 0x00070000 - - A 4-values flag - the number of components - 1 - * - ``FWHT_FL_PIXENC_YUV`` - - 0x00080000 - - Set if the pixel encoding is YUV - * - ``FWHT_FL_PIXENC_RGB`` - - 0x00100000 - - Set if the pixel encoding is RGB - * - ``FWHT_FL_PIXENC_HSV`` - - 0x00180000 - - Set if the pixel encoding is HSV - - CX2341x MPEG Controls ===================== @@ -2981,6 +1874,7 @@ enum v4l2_mpeg_cx2341x_video_spatial_filter_mode - are: +.. tabularcolumns:: |p{11.5cm}|p{6.0cm}| .. flat-table:: :header-rows: 0 @@ -3006,11 +1900,11 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - Select the algorithm to use for the Luma Spatial Filter (default ``1D_HOR``). Possible values: -.. tabularcolumns:: |p{14.5cm}|p{3.0cm}| +.. tabularcolumns:: |p{13.1cm}|p{4.4cm}| .. raw:: latex - \small + \footnotesize .. flat-table:: :header-rows: 0 @@ -3031,8 +1925,6 @@ enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type - \normalsize - - .. _chroma-spatial-filter-type: ``V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE`` @@ -3042,8 +1934,11 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - Select the algorithm for the Chroma Spatial Filter (default ``1D_HOR``). Possible values are: +.. raw:: latex -.. tabularcolumns:: |p{14.0cm}|p{3.5cm}| + \footnotesize + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -3054,7 +1949,9 @@ enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE_1D_HOR`` - One-dimensional horizontal +.. raw:: latex + \normalsize .. _v4l2-mpeg-cx2341x-video-temporal-filter-mode: @@ -3065,7 +1962,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - Sets the Temporal Filter mode (default ``MANUAL``). Possible values are: +.. raw:: latex + \footnotesize .. flat-table:: :header-rows: 0 @@ -3076,7 +1975,9 @@ enum v4l2_mpeg_cx2341x_video_temporal_filter_mode - * - ``V4L2_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE_AUTO`` - Choose the filter automatically +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER (integer (0-31))`` The setting for the Temporal Filter. 0 = off, 31 = maximum. (Default @@ -3091,6 +1992,11 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - Median Filter Type (default ``OFF``). Possible values are: +.. raw:: latex + + \small + +.. tabularcolumns:: |p{11.0cm}|p{6.5cm}| .. flat-table:: :header-rows: 0 @@ -3107,7 +2013,9 @@ enum v4l2_mpeg_cx2341x_video_median_filter_type - * - ``V4L2_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE_DIAG`` - Diagonal filter +.. raw:: latex + \normalsize ``V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM (integer (0-255))`` Threshold above which the luminance median filter is enabled @@ -3184,7 +2092,7 @@ enum v4l2_vp8_num_ref_frames - The number of reference pictures for encoding P frames. Possible values are: -.. tabularcolumns:: |p{7.9cm}|p{9.6cm}| +.. tabularcolumns:: |p{7.5cm}|p{7.5cm}| .. raw:: latex @@ -3239,7 +2147,7 @@ enum v4l2_vp8_golden_frame_sel - \scriptsize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.6cm}|p{8.9cm}| .. flat-table:: :header-rows: 0 @@ -3316,6 +2224,49 @@ enum v4l2_mpeg_video_vp9_profile - * - ``V4L2_MPEG_VIDEO_VP9_PROFILE_3`` - Profile 3 +.. _v4l2-mpeg-video-vp9-level: + +``V4L2_CID_MPEG_VIDEO_VP9_LEVEL (enum)`` + +enum v4l2_mpeg_video_vp9_level - + This control allows selecting the level for VP9 encoder. + This is also used to enumerate supported levels by VP9 encoder or decoder. + More information can be found at + `webmproject <https://www.webmproject.org/vp9/levels/>`__. Possible values are: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_0`` + - Level 1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_1_1`` + - Level 1.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_0`` + - Level 2 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_2_1`` + - Level 2.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_0`` + - Level 3 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_3_1`` + - Level 3.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_0`` + - Level 4 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_4_1`` + - Level 4.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_0`` + - Level 5 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_1`` + - Level 5.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_5_2`` + - Level 5.2 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_0`` + - Level 6 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_1`` + - Level 6.1 + * - ``V4L2_MPEG_VIDEO_VP9_LEVEL_6_2`` + - Level 6.2 + High Efficiency Video Coding (HEVC/H.265) Control Reference =========================================================== @@ -3331,11 +2282,11 @@ HEVC/H.265 Control IDs ``V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP (integer)`` Minimum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP (integer)`` Maximum quantization parameter for HEVC. - Valid range: from 0 to 51. + Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. ``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_QP (integer)`` Quantization parameter for an I frame for HEVC. @@ -3352,6 +2303,42 @@ HEVC/H.265 Control IDs Valid range: [V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP, V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP]. +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_I_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC I frame to limit I frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_P_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC P frame to limit P frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MIN_QP (integer)`` + Minimum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MIN_QP is also set, the quantization parameter + should be chosen to meet both requirements. + +``V4L2_CID_MPEG_VIDEO_HEVC_B_FRAME_MAX_QP (integer)`` + Maximum quantization parameter for the HEVC B frame to limit B frame + quality to a range. Valid range: from 0 to 51 for 8 bit and from 0 to 63 for 10 bit. + If V4L2_CID_MPEG_VIDEO_HEVC_MAX_QP is also set, the quantization parameter + should be chosen to meet both requirements. + ``V4L2_CID_MPEG_VIDEO_HEVC_HIER_QP (boolean)`` HIERARCHICAL_QP allows the host to specify the quantization parameter values for each temporal layer through HIERARCHICAL_QP_LAYER. This is @@ -3370,7 +2357,7 @@ enum v4l2_mpeg_video_hevc_hier_coding_type - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{8.2cm}|p{9.3cm}| .. flat-table:: :header-rows: 0 @@ -3439,7 +2426,7 @@ enum v4l2_mpeg_video_hevc_profile - \footnotesize -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| +.. tabularcolumns:: |p{9.0cm}|p{8.5cm}| .. flat-table:: :header-rows: 0 @@ -3465,47 +2452,21 @@ enum v4l2_mpeg_video_hevc_profile - enum v4l2_mpeg_video_hevc_level - Selects the desired level for HEVC encoder. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` - - Level 1.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` - - Level 2.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` - - Level 2.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` - - Level 3.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` - - Level 3.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` - - Level 4.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` - - Level 4.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` - - Level 5.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` - - Level 5.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` - - Level 5.2 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` - - Level 6.0 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` - - Level 6.1 - * - ``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` - - Level 6.2 - -.. raw:: latex - - \normalsize - +================================== ========= +``V4L2_MPEG_VIDEO_HEVC_LEVEL_1`` Level 1.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2`` Level 2.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_2_1`` Level 2.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3`` Level 3.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_3_1`` Level 3.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4`` Level 4.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_4_1`` Level 4.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5`` Level 5.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_1`` Level 5.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_5_2`` Level 5.2 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6`` Level 6.0 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_1`` Level 6.1 +``V4L2_MPEG_VIDEO_HEVC_LEVEL_6_2`` Level 6.2 +================================== ========= ``V4L2_CID_MPEG_VIDEO_HEVC_FRAME_RATE_RESOLUTION (integer)`` Indicates the number of evenly spaced subintervals, called ticks, within @@ -3524,24 +2485,10 @@ enum v4l2_mpeg_video_hevc_tier - this flag to 1 indicates High tier. High tier is for applications requiring high bit rates. -.. raw:: latex - - \footnotesize - -.. tabularcolumns:: |p{9.0cm}|p{8.0cm}| - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` - - Main tier. - * - ``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` - - High tier. - -.. raw:: latex - - \normalsize +================================== ========== +``V4L2_MPEG_VIDEO_HEVC_TIER_MAIN`` Main tier. +``V4L2_MPEG_VIDEO_HEVC_TIER_HIGH`` High tier. +================================== ========== ``V4L2_CID_MPEG_VIDEO_HEVC_MAX_PARTITION_DEPTH (integer)`` @@ -3597,7 +2544,7 @@ enum v4l2_mpeg_video_hevc_hier_refresh_type - \footnotesize -.. tabularcolumns:: |p{8.0cm}|p{9.0cm}| +.. tabularcolumns:: |p{6.2cm}|p{11.3cm}| .. flat-table:: :header-rows: 0 @@ -3677,7 +2624,7 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - \footnotesize -.. tabularcolumns:: |p{6.0cm}|p{11.0cm}| +.. tabularcolumns:: |p{5.5cm}|p{12.0cm}| .. flat-table:: :header-rows: 0 @@ -3725,550 +2672,3 @@ enum v4l2_mpeg_video_hevc_size_of_length_field - Indicates whether to generate SPS and PPS at every IDR. Setting it to 0 disables generating SPS and PPS at every IDR. Setting it to one enables generating SPS and PPS at every IDR. - -.. _v4l2-mpeg-hevc: - -``V4L2_CID_MPEG_VIDEO_HEVC_SPS (struct)`` - Specifies the Sequence Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.2 "Sequence parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_sps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_sps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u16 - - ``pic_width_in_luma_samples`` - - - * - __u16 - - ``pic_height_in_luma_samples`` - - - * - __u8 - - ``bit_depth_luma_minus8`` - - - * - __u8 - - ``bit_depth_chroma_minus8`` - - - * - __u8 - - ``log2_max_pic_order_cnt_lsb_minus4`` - - - * - __u8 - - ``sps_max_dec_pic_buffering_minus1`` - - - * - __u8 - - ``sps_max_num_reorder_pics`` - - - * - __u8 - - ``sps_max_latency_increase_plus1`` - - - * - __u8 - - ``log2_min_luma_coding_block_size_minus3`` - - - * - __u8 - - ``log2_diff_max_min_luma_coding_block_size`` - - - * - __u8 - - ``log2_min_luma_transform_block_size_minus2`` - - - * - __u8 - - ``log2_diff_max_min_luma_transform_block_size`` - - - * - __u8 - - ``max_transform_hierarchy_depth_inter`` - - - * - __u8 - - ``max_transform_hierarchy_depth_intra`` - - - * - __u8 - - ``pcm_sample_bit_depth_luma_minus1`` - - - * - __u8 - - ``pcm_sample_bit_depth_chroma_minus1`` - - - * - __u8 - - ``log2_min_pcm_luma_coding_block_size_minus3`` - - - * - __u8 - - ``log2_diff_max_min_pcm_luma_coding_block_size`` - - - * - __u8 - - ``num_short_term_ref_pic_sets`` - - - * - __u8 - - ``num_long_term_ref_pics_sps`` - - - * - __u8 - - ``chroma_format_idc`` - - - * - __u64 - - ``flags`` - - See :ref:`Sequence Parameter Set Flags <hevc_sps_flags>` - -.. _hevc_sps_flags: - -``Sequence Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE`` - - 0x00000001 - - - * - ``V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED`` - - 0x00000002 - - - * - ``V4L2_HEVC_SPS_FLAG_AMP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET`` - - 0x00000008 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_ENABLED`` - - 0x00000010 - - - * - ``V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT`` - - 0x00000040 - - - * - ``V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED`` - - 0x00000100 - - - -``V4L2_CID_MPEG_VIDEO_HEVC_PPS (struct)`` - Specifies the Picture Parameter Set fields (as extracted from the - bitstream) for the associated HEVC slice data. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.3.3 "Picture parameter set RBSP - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_pps - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_pps - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``num_extra_slice_header_bits`` - - - * - __s8 - - ``init_qp_minus26`` - - - * - __u8 - - ``diff_cu_qp_delta_depth`` - - - * - __s8 - - ``pps_cb_qp_offset`` - - - * - __s8 - - ``pps_cr_qp_offset`` - - - * - __u8 - - ``num_tile_columns_minus1`` - - - * - __u8 - - ``num_tile_rows_minus1`` - - - * - __u8 - - ``column_width_minus1[20]`` - - - * - __u8 - - ``row_height_minus1[22]`` - - - * - __s8 - - ``pps_beta_offset_div2`` - - - * - __s8 - - ``pps_tc_offset_div2`` - - - * - __u8 - - ``log2_parallel_merge_level_minus2`` - - - * - __u8 - - ``padding[4]`` - - Applications and drivers must set this to zero. - * - __u64 - - ``flags`` - - See :ref:`Picture Parameter Set Flags <hevc_pps_flags>` - -.. _hevc_pps_flags: - -``Picture Parameter Set Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT`` - - 0x00000001 - - - * - ``V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT`` - - 0x00000002 - - - * - ``V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT`` - - 0x00000008 - - - * - ``V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED`` - - 0x00000010 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED`` - - 0x00000020 - - - * - ``V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED`` - - 0x00000040 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT`` - - 0x00000080 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED`` - - 0x00000100 - - - * - ``V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED`` - - 0x00000200 - - - * - ``V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED`` - - 0x00000400 - - - * - ``V4L2_HEVC_PPS_FLAG_TILES_ENABLED`` - - 0x00000800 - - - * - ``V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED`` - - 0x00001000 - - - * - ``V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED`` - - 0x00002000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00004000 - - - * - ``V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED`` - - 0x00008000 - - - * - ``V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER`` - - 0x00010000 - - - * - ``V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT`` - - 0x00020000 - - - * - ``V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT`` - - 0x00040000 - - - -``V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (struct)`` - Specifies various slice-specific parameters, especially from the NAL unit - header, general slice segment header and weighted prediction parameter - parts of the bitstream. - These bitstream parameters are defined according to :ref:`hevc`. - They are described in section 7.4.7 "General slice segment header - semantics" of the specification. - -.. c:type:: v4l2_ctrl_hevc_slice_params - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_ctrl_hevc_slice_params - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u32 - - ``bit_size`` - - Size (in bits) of the current slice data. - * - __u32 - - ``data_bit_offset`` - - Offset (in bits) to the video data in the current slice data. - * - __u8 - - ``nal_unit_type`` - - - * - __u8 - - ``nuh_temporal_id_plus1`` - - - * - __u8 - - ``slice_type`` - - - (V4L2_HEVC_SLICE_TYPE_I, V4L2_HEVC_SLICE_TYPE_P or - V4L2_HEVC_SLICE_TYPE_B). - * - __u8 - - ``colour_plane_id`` - - - * - __u16 - - ``slice_pic_order_cnt`` - - - * - __u8 - - ``num_ref_idx_l0_active_minus1`` - - - * - __u8 - - ``num_ref_idx_l1_active_minus1`` - - - * - __u8 - - ``collocated_ref_idx`` - - - * - __u8 - - ``five_minus_max_num_merge_cand`` - - - * - __s8 - - ``slice_qp_delta`` - - - * - __s8 - - ``slice_cb_qp_offset`` - - - * - __s8 - - ``slice_cr_qp_offset`` - - - * - __s8 - - ``slice_act_y_qp_offset`` - - - * - __s8 - - ``slice_act_cb_qp_offset`` - - - * - __s8 - - ``slice_act_cr_qp_offset`` - - - * - __s8 - - ``slice_beta_offset_div2`` - - - * - __s8 - - ``slice_tc_offset_div2`` - - - * - __u8 - - ``pic_struct`` - - - * - __u8 - - ``num_active_dpb_entries`` - - The number of entries in ``dpb``. - * - __u8 - - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L0 reference elements as indices in the DPB. - * - __u8 - - ``ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The list of L1 reference elements as indices in the DPB. - * - __u8 - - ``num_rps_poc_st_curr_before`` - - The number of reference pictures in the short-term set that come before - the current frame. - * - __u8 - - ``num_rps_poc_st_curr_after`` - - The number of reference pictures in the short-term set that come after - the current frame. - * - __u8 - - ``num_rps_poc_lt_curr`` - - The number of reference pictures in the long-term set. - * - __u8 - - ``padding[7]`` - - Applications and drivers must set this to zero. - * - struct :c:type:`v4l2_hevc_dpb_entry` - - ``dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - The decoded picture buffer, for meta-data about reference frames. - * - struct :c:type:`v4l2_hevc_pred_weight_table` - - ``pred_weight_table`` - - The prediction weight coefficients for inter-picture prediction. - * - __u64 - - ``flags`` - - See :ref:`Slice Parameters Flags <hevc_slice_params_flags>` - -.. _hevc_slice_params_flags: - -``Slice Parameters Flags`` - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA`` - - 0x00000001 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA`` - - 0x00000002 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED`` - - 0x00000004 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO`` - - 0x00000008 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT`` - - 0x00000010 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0`` - - 0x00000020 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV`` - - 0x00000040 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED`` - - 0x00000080 - - - * - ``V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED`` - - 0x00000100 - - - -.. c:type:: v4l2_hevc_dpb_entry - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_hevc_dpb_entry - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u64 - - ``timestamp`` - - Timestamp of the V4L2 capture buffer to use as reference, used - with B-coded and P-coded frames. The timestamp refers to the - ``timestamp`` field in struct :c:type:`v4l2_buffer`. Use the - :c:func:`v4l2_timeval_to_ns()` function to convert the struct - :c:type:`timeval` in struct :c:type:`v4l2_buffer` to a __u64. - * - __u8 - - ``rps`` - - The reference set for the reference frame - (V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE, - V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER or - V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR) - * - __u8 - - ``field_pic`` - - Whether the reference is a field picture or a frame. - * - __u16 - - ``pic_order_cnt[2]`` - - The picture order count of the reference. Only the first element of the - array is used for frame pictures, while the first element identifies the - top field and the second the bottom field in field-coded pictures. - * - __u8 - - ``padding[2]`` - - Applications and drivers must set this to zero. - -.. c:type:: v4l2_hevc_pred_weight_table - -.. cssclass:: longtable - -.. flat-table:: struct v4l2_hevc_pred_weight_table - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - __u8 - - ``luma_log2_weight_denom`` - - - * - __s8 - - ``delta_chroma_log2_weight_denom`` - - - * - __s8 - - ``delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]`` - - - * - __s8 - - ``delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __s8 - - ``chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]`` - - - * - __u8 - - ``padding[6]`` - - Applications and drivers must set this to zero. - -``V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (enum)`` - Specifies the decoding mode to use. Currently exposes slice-based and - frame-based decoding but new modes might be added later on. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the decoding mode - that is expected for the buffer. - Drivers may expose a single or multiple decoding modes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_hevc_decode_mode - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED`` - - 0 - - Decoding is done at the slice granularity. - The OUTPUT buffer must contain a single slice. - * - ``V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED`` - - 1 - - Decoding is done at the frame granularity. - The OUTPUT buffer must contain all slices needed to decode the - frame. The OUTPUT buffer must also contain both fields. - -``V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (enum)`` - Specifies the HEVC slice start code expected for each slice. - This control is used as a modifier for V4L2_PIX_FMT_HEVC_SLICE - pixel format. Applications that support V4L2_PIX_FMT_HEVC_SLICE - are required to set this control in order to specify the start code - that is expected for the buffer. - Drivers may expose a single or multiple start codes, depending - on what they can support. - - .. note:: - - This menu control is not yet part of the public kernel API and - it is expected to change. - -.. c:type:: v4l2_mpeg_video_hevc_start_code - -.. cssclass:: longtable - -.. flat-table:: - :header-rows: 0 - :stub-columns: 0 - :widths: 1 1 2 - - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE`` - - 0 - - Selecting this value specifies that HEVC slices are passed - to the driver without any start code. - * - ``V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B`` - - 1 - - Selecting this value specifies that HEVC slices are expected - to be prefixed by Annex B start codes. According to :ref:`hevc` - valid start codes can be 3-bytes 0x000001 or 4-bytes 0x00000001. |