diff options
Diffstat (limited to 'Documentation/x86/x86_64/boot-options.rst')
| -rw-r--r-- | Documentation/x86/x86_64/boot-options.rst | 317 |
1 files changed, 0 insertions, 317 deletions
diff --git a/Documentation/x86/x86_64/boot-options.rst b/Documentation/x86/x86_64/boot-options.rst deleted file mode 100644 index 03ec9cf01181..000000000000 --- a/Documentation/x86/x86_64/boot-options.rst +++ /dev/null @@ -1,317 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -=========================== -AMD64 Specific Boot Options -=========================== - -There are many others (usually documented in driver documentation), but -only the AMD64 specific ones are listed here. - -Machine check -============= -Please see Documentation/x86/x86_64/machinecheck.rst for sysfs runtime tunables. - - mce=off - Disable machine check - mce=no_cmci - Disable CMCI(Corrected Machine Check Interrupt) that - Intel processor supports. Usually this disablement is - not recommended, but it might be handy if your hardware - is misbehaving. - Note that you'll get more problems without CMCI than with - due to the shared banks, i.e. you might get duplicated - error logs. - mce=dont_log_ce - Don't make logs for corrected errors. All events reported - as corrected are silently cleared by OS. - This option will be useful if you have no interest in any - of corrected errors. - mce=ignore_ce - Disable features for corrected errors, e.g. polling timer - and CMCI. All events reported as corrected are not cleared - by OS and remained in its error banks. - Usually this disablement is not recommended, however if - there is an agent checking/clearing corrected errors - (e.g. BIOS or hardware monitoring applications), conflicting - with OS's error handling, and you cannot deactivate the agent, - then this option will be a help. - mce=no_lmce - Do not opt-in to Local MCE delivery. Use legacy method - to broadcast MCEs. - mce=bootlog - Enable logging of machine checks left over from booting. - Disabled by default on AMD Fam10h and older because some BIOS - leave bogus ones. - If your BIOS doesn't do that it's a good idea to enable though - to make sure you log even machine check events that result - in a reboot. On Intel systems it is enabled by default. - mce=nobootlog - Disable boot machine check logging. - mce=monarchtimeout (number) - monarchtimeout: - Sets the time in us to wait for other CPUs on machine checks. 0 - to disable. - mce=bios_cmci_threshold - Don't overwrite the bios-set CMCI threshold. This boot option - prevents Linux from overwriting the CMCI threshold set by the - bios. Without this option, Linux always sets the CMCI - threshold to 1. Enabling this may make memory predictive failure - analysis less effective if the bios sets thresholds for memory - errors since we will not see details for all errors. - mce=recovery - Force-enable recoverable machine check code paths - - nomce (for compatibility with i386) - same as mce=off - - Everything else is in sysfs now. - -APICs -===== - - apic - Use IO-APIC. Default - - noapic - Don't use the IO-APIC. - - disableapic - Don't use the local APIC - - nolapic - Don't use the local APIC (alias for i386 compatibility) - - pirq=... - See Documentation/x86/i386/IO-APIC.rst - - noapictimer - Don't set up the APIC timer - - no_timer_check - Don't check the IO-APIC timer. This can work around - problems with incorrect timer initialization on some boards. - - apicpmtimer - Do APIC timer calibration using the pmtimer. Implies - apicmaintimer. Useful when your PIT timer is totally broken. - -Timing -====== - - notsc - Deprecated, use tsc=unstable instead. - - nohpet - Don't use the HPET timer. - -Idle loop -========= - - idle=poll - Don't do power saving in the idle loop using HLT, but poll for rescheduling - event. This will make the CPUs eat a lot more power, but may be useful - to get slightly better performance in multiprocessor benchmarks. It also - makes some profiling using performance counters more accurate. - Please note that on systems with MONITOR/MWAIT support (like Intel EM64T - CPUs) this option has no performance advantage over the normal idle loop. - It may also interact badly with hyperthreading. - -Rebooting -========= - - reboot=b[ios] | t[riple] | k[bd] | a[cpi] | e[fi] | p[ci] [, [w]arm | [c]old] - bios - Use the CPU reboot vector for warm reset - warm - Don't set the cold reboot flag - cold - Set the cold reboot flag - triple - Force a triple fault (init) - kbd - Use the keyboard controller. cold reset (default) - acpi - Use the ACPI RESET_REG in the FADT. If ACPI is not configured or - the ACPI reset does not work, the reboot path attempts the reset - using the keyboard controller. - efi - Use efi reset_system runtime service. If EFI is not configured or - the EFI reset does not work, the reboot path attempts the reset using - the keyboard controller. - pci - Use a write to the PCI config space register 0xcf9 to trigger reboot. - - Using warm reset will be much faster especially on big memory - systems because the BIOS will not go through the memory check. - Disadvantage is that not all hardware will be completely reinitialized - on reboot so there may be boot problems on some systems. - - reboot=force - Don't stop other CPUs on reboot. This can make reboot more reliable - in some cases. - - reboot=default - There are some built-in platform specific "quirks" - you may see: - "reboot: <name> series board detected. Selecting <type> for reboots." - In the case where you think the quirk is in error (e.g. you have - newer BIOS, or newer board) using this option will ignore the built-in - quirk table, and use the generic default reboot actions. - -NUMA -==== - - numa=off - Only set up a single NUMA node spanning all memory. - - numa=noacpi - Don't parse the SRAT table for NUMA setup - - numa=nohmat - Don't parse the HMAT table for NUMA setup, or soft-reserved memory - partitioning. - - numa=fake=<size>[MG] - If given as a memory unit, fills all system RAM with nodes of - size interleaved over physical nodes. - - numa=fake=<N> - If given as an integer, fills all system RAM with N fake nodes - interleaved over physical nodes. - - numa=fake=<N>U - If given as an integer followed by 'U', it will divide each - physical node into N emulated nodes. - -ACPI -==== - - acpi=off - Don't enable ACPI - acpi=ht - Use ACPI boot table parsing, but don't enable ACPI interpreter - acpi=force - Force ACPI on (currently not needed) - acpi=strict - Disable out of spec ACPI workarounds. - acpi_sci={edge,level,high,low} - Set up ACPI SCI interrupt. - acpi=noirq - Don't route interrupts - acpi=nocmcff - Disable firmware first mode for corrected errors. This - disables parsing the HEST CMC error source to check if - firmware has set the FF flag. This may result in - duplicate corrected error reports. - -PCI -=== - - pci=off - Don't use PCI - pci=conf1 - Use conf1 access. - pci=conf2 - Use conf2 access. - pci=rom - Assign ROMs. - pci=assign-busses - Assign busses - pci=irqmask=MASK - Set PCI interrupt mask to MASK - pci=lastbus=NUMBER - Scan up to NUMBER busses, no matter what the mptable says. - pci=noacpi - Don't use ACPI to set up PCI interrupt routing. - -IOMMU (input/output memory management unit) -=========================================== -Multiple x86-64 PCI-DMA mapping implementations exist, for example: - - 1. <kernel/dma/direct.c>: use no hardware/software IOMMU at all - (e.g. because you have < 3 GB memory). - Kernel boot message: "PCI-DMA: Disabling IOMMU" - - 2. <arch/x86/kernel/amd_gart_64.c>: AMD GART based hardware IOMMU. - Kernel boot message: "PCI-DMA: using GART IOMMU" - - 3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used - e.g. if there is no hardware IOMMU in the system and it is need because - you have >3GB memory or told the kernel to us it (iommu=soft)) - Kernel boot message: "PCI-DMA: Using software bounce buffering - for IO (SWIOTLB)" - -:: - - iommu=[<size>][,noagp][,off][,force][,noforce] - [,memaper[=<order>]][,merge][,fullflush][,nomerge] - [,noaperture] - -General iommu options: - - off - Don't initialize and use any kind of IOMMU. - noforce - Don't force hardware IOMMU usage when it is not needed. (default). - force - Force the use of the hardware IOMMU even when it is - not actually needed (e.g. because < 3 GB memory). - soft - Use software bounce buffering (SWIOTLB) (default for - Intel machines). This can be used to prevent the usage - of an available hardware IOMMU. - -iommu options only relevant to the AMD GART hardware IOMMU: - - <size> - Set the size of the remapping area in bytes. - allowed - Overwrite iommu off workarounds for specific chipsets. - fullflush - Flush IOMMU on each allocation (default). - nofullflush - Don't use IOMMU fullflush. - memaper[=<order>] - Allocate an own aperture over RAM with size 32MB<<order. - (default: order=1, i.e. 64MB) - merge - Do scatter-gather (SG) merging. Implies "force" (experimental). - nomerge - Don't do scatter-gather (SG) merging. - noaperture - Ask the IOMMU not to touch the aperture for AGP. - noagp - Don't initialize the AGP driver and use full aperture. - panic - Always panic when IOMMU overflows. - -iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU -implementation: - - swiotlb=<pages>[,force] - <pages> - Prereserve that many 128K pages for the software IO bounce buffering. - force - Force all IO through the software TLB. - - -Miscellaneous -============= - - nogbpages - Do not use GB pages for kernel direct mappings. - gbpages - Use GB pages for kernel direct mappings. - - -AMD SEV (Secure Encrypted Virtualization) -========================================= -Options relating to AMD SEV, specified via the following format: - -:: - - sev=option1[,option2] - -The available options are: - - debug - Enable debug messages. |