diff options
Diffstat (limited to 'arch/arm/boot/dts/amlogic/meson8.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/amlogic/meson8.dtsi | 72 |
1 files changed, 50 insertions, 22 deletions
diff --git a/arch/arm/boot/dts/amlogic/meson8.dtsi b/arch/arm/boot/dts/amlogic/meson8.dtsi index f57be9ae150f..a609b5a0fda4 100644 --- a/arch/arm/boot/dts/amlogic/meson8.dtsi +++ b/arch/arm/boot/dts/amlogic/meson8.dtsi @@ -196,7 +196,7 @@ }; thermal-zones { - soc { + soc-thermal { polling-delay-passive = <250>; /* milliseconds */ polling-delay = <1000>; /* milliseconds */ thermal-sensors = <&thermal_sensor>; @@ -346,17 +346,16 @@ reg = <0xe0 0x18>; }; - pinctrl_aobus: pinctrl@84 { + pinctrl_aobus: pinctrl@14 { compatible = "amlogic,meson8-aobus-pinctrl"; - reg = <0x84 0xc>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x14 0x1c>; - gpio_ao: ao-bank@14 { - reg = <0x14 0x4>, - <0x2c 0x4>, - <0x24 0x8>; + gpio_ao: bank@0 { + reg = <0x0 0x4>, + <0x18 0x4>, + <0x10 0x8>; reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; @@ -399,7 +398,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; - bias-disable; + bias-pull-up; }; }; @@ -450,7 +449,11 @@ }; pwm_ef: pwm@86c0 { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <0>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; reg = <0x86c0 0x10>; #pwm-cells = <3>; status = "disabled"; @@ -461,24 +464,31 @@ reg = <0x8758 0x1c>; }; - pinctrl_cbus: pinctrl@9880 { + pinctrl_cbus: pinctrl@8030 { compatible = "amlogic,meson8-cbus-pinctrl"; - reg = <0x9880 0x10>; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x8030 0x108>; - gpio: banks@80b0 { - reg = <0x80b0 0x28>, - <0x80e8 0x18>, - <0x8120 0x18>, - <0x8030 0x30>; + gpio: bank@80 { + reg = <0x80 0x28>, + <0xb8 0x18>, + <0xf0 0x18>, + <0x00 0x30>; reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; gpio-ranges = <&pinctrl_cbus 0 0 120>; }; + i2c_b_pins: i2c-b { + mux { + groups = "i2c_sda_b", "i2c_sck_b"; + function = "i2c_b"; + bias-disable; + }; + }; + sd_a_pins: sd-a { mux { groups = "sd_d0_a", "sd_d1_a", "sd_d2_a", @@ -524,6 +534,16 @@ }; }; + sdxc_c_pins: sdxc-c { + mux { + groups = "sdxc_d0_c", "sdxc_d13_c", + "sdxc_clk_c", "sdxc_cmd_c", + "sdxc_d47_c"; + function = "sdxc_c"; + bias-pull-up; + }; + }; + spdif_out_pins: spdif-out { mux { groups = "spdif_out"; @@ -565,7 +585,7 @@ groups = "uart_tx_a1", "uart_rx_a1"; function = "uart_a"; - bias-disable; + bias-pull-up; }; }; @@ -589,7 +609,7 @@ }; &ahb_sram { - ao_arc_sram: ao-arc-sram@0 { + ao_arc_sram: aoarc-sram@0 { compatible = "amlogic,meson8-ao-arc-sram"; reg = <0x0 0x8000>; pool; @@ -701,11 +721,19 @@ }; &pwm_ab { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <0>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &pwm_cd { - compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + compatible = "amlogic,meson8-pwm-v2"; + clocks = <&xtal>, + <0>, /* unknown/untested, the datasheet calls it "Video PLL" */ + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_FCLK_DIV3>; }; &rtc { |