diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-utilite-pro.dts')
-rw-r--r-- | arch/arm/boot/dts/imx6q-utilite-pro.dts | 355 |
1 files changed, 0 insertions, 355 deletions
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts deleted file mode 100644 index d16ff2083d62..000000000000 --- a/arch/arm/boot/dts/imx6q-utilite-pro.dts +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Copyright 2013 CompuLab Ltd. - * Copyright 2016 Christopher Spinrath - * - * Based on the devicetree distributed with the vendor kernel for the - * Utilite Pro: - * Copyright 2013 CompuLab Ltd. - * Author: Valentin Raevsky <valentin@compulab.co.il> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/input/input.h> -#include "imx6q-cm-fx6.dts" - -/ { - model = "CompuLab Utilite Pro"; - compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; - - aliases { - ethernet1 = ð1; - rtc0 = &em3027; - rtc1 = &snvs_rtc; - }; - - encoder { - compatible = "ti,tfp410"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tfp410_in: endpoint { - remote-endpoint = <¶llel_display_out>; - }; - }; - - port@1 { - reg = <1>; - - tfp410_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - power { - label = "Power Button"; - gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - wakeup-source; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hpd>; - type = "a"; - ddc-i2c-bus = <&i2c_dvi_ddc>; - hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tfp410_out>; - }; - }; - }; - - i2cmux { - compatible = "i2c-mux-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1mux>; - #address-cells = <1>; - #size-cells = <0>; - - mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - i2c-parent = <&i2c1>; - - i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - em3027: rtc@56 { - compatible = "emmicro,em3027"; - reg = <0x56>; - }; - }; - - i2c_dvi_ddc: i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - parallel-display { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1>; - - interface-pix-fmt = "rgb24"; - - port@0 { - reg = <0>; - - parallel_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp0>; - }; - }; - - port@1 { - reg = <1>; - - parallel_display_out: endpoint { - remote-endpoint = <&tfp410_in>; - }; - }; - }; -}; - -/* - * A single IPU is not able to drive both display interfaces available on the - * Utilite Pro at high resolution due to its bandwidth limitation. Since the - * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the - * SoC-internal Designware HDMI encoder forcing the latter to be connected to - * IPU2 instead of IPU1. - */ -/delete-node/&ipu1_di0_hdmi; -/delete-node/&hdmi_mux_0; -/delete-node/&ipu1_di1_hdmi; -/delete-node/&hdmi_mux_1; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hdmicec>; - ddc-i2c-bus = <&i2c2>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; -}; - -&iomuxc { - pinctrl_gpio_keys: gpio_keysgrp { - fsl,pins = < - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 - >; - }; - - pinctrl_hdmicec: hdmicecgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_hpd: hpdgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c1mux: i2c1muxgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_ipu1: ipu1grp { - fsl,pins = < - MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38 - MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x38 - MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x38 - MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x38 - MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x38 - MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x38 - MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x38 - MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x38 - MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x38 - MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x38 - MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x38 - MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x38 - MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x38 - MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x38 - MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x38 - MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x38 - MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x38 - MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x38 - MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x38 - MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x38 - MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x38 - MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x38 - MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x38 - MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x38 - MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x38 - MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x38 - MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x38 - MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x38 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 - MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 - >; - }; -}; - -&ipu1_di0_disp0 { - remote-endpoint = <¶llel_display_in>; -}; - -&pcie { - pcie@0,0 { - reg = <0x000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - /* non-removable i211 ethernet card */ - eth1: intel,i211@pcie0,0 { - reg = <0x010000 0 0 0 0>; - }; - }; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - uart-has-rtscts; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - no-1-8-v; - broken-cd; - keep-power-in-suspend; - status = "okay"; -}; |