diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index b5606623f968..8d2a054d8fee 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -19,6 +19,38 @@ chosen { stdout-path = "serial0:115200n8"; }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>, <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + debounce-interval = <150>; + }; + }; }; &blsp1_i2c1 { @@ -67,6 +99,49 @@ syna,clip-y-high = <1920>; }; }; + + led-controller@36 { + compatible = "ti,lm3630a"; + reg = <0x36>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <80>; + }; + }; + + led-controller@68 { + compatible = "si-en,sn3193"; + reg = <0x68>; + + shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + label = "red:status"; + led-max-microamp = <17500>; + }; + + led@2 { + reg = <2>; + label = "green:status"; + led-max-microamp = <17500>; + }; + + led@3 { + reg = <3>; + label = "blue:status"; + led-max-microamp = <17500>; + }; + }; }; &blsp1_i2c6 { @@ -95,6 +170,20 @@ status = "okay"; }; +&pm8941_gpios { + gpio_keys_default: gpio-keys-active-state { + pins = "gpio2", "gpio5"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + &pronto { vddmx-supply = <&pm8841_s1>; vddcx-supply = <&pm8841_s2>; @@ -345,6 +434,13 @@ }; &tlmm { + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio68"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + sdc1_on: sdc1-on-state { clk-pins { pins = "sdc1_clk"; |