diff options
Diffstat (limited to 'arch/arm/mach-davinci/Kconfig')
| -rw-r--r-- | arch/arm/mach-davinci/Kconfig | 144 |
1 files changed, 2 insertions, 142 deletions
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index c8cbd9a30791..2a8a9fe46586 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,31 +4,22 @@ menuconfig ARCH_DAVINCI bool "TI DaVinci" depends on ARCH_MULTI_V5 depends on CPU_LITTLE_ENDIAN + select CPU_ARM926T select DAVINCI_TIMER select ZONE_DMA select PM_GENERIC_DOMAINS if PM select PM_GENERIC_DOMAINS_OF if PM && OF select REGMAP_MMIO select RESET_CONTROLLER + select PINCTRL select PINCTRL_SINGLE if ARCH_DAVINCI -config ARCH_DAVINCI_DMx - bool - comment "DaVinci Core Type" -config ARCH_DAVINCI_DM355 - bool "DaVinci 355 based system" - depends on ATAGS && UNUSED_BOARD_FILES - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) - depends on ATAGS select ARCH_DAVINCI_DA8XX # needed on silicon revs 1.0, 1.1: select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE @@ -36,142 +27,11 @@ config ARCH_DAVINCI_DA830 config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT) - depends on ATAGS - select ARCH_DAVINCI_DA8XX select DAVINCI_CP_INTC config ARCH_DAVINCI_DA8XX bool -config ARCH_DAVINCI_DM365 - bool "DaVinci 365 based system" - depends on ATAGS && UNUSED_BOARD_FILES - select DAVINCI_AINTC - select ARCH_DAVINCI_DMx - -comment "DaVinci Board Type" - -config MACH_DA8XX_DT - bool "Support DA8XX platforms using device tree" - default y - depends on ARCH_DAVINCI_DA850 - select PINCTRL - help - Say y here to include support for TI DaVinci DA850 based using - Flattened Device Tree. More information at Documentation/devicetree - -config MACH_DAVINCI_DM355_EVM - bool "TI DM355 EVM" - default ARCH_DAVINCI_DM355 - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 EVM - -config MACH_DM355_LEOPARD - bool "DM355 Leopard board" - depends on ARCH_DAVINCI_DM355 - help - Configure this option to specify the whether the board used - for development is a DM355 Leopard board. - -config MACH_DAVINCI_DM365_EVM - bool "TI DM365 EVM" - default ARCH_DAVINCI_DM365 - depends on ARCH_DAVINCI_DM365 - help - Configure this option to specify whether the board used - for development is a DM365 EVM - -config MACH_DAVINCI_DA830_EVM - bool "TI DA830/OMAP-L137/AM17x Reference Platform" - default ARCH_DAVINCI_DA830 - depends on ATAGS && UNUSED_BOARD_FILES - depends on ARCH_DAVINCI_DA830 - select GPIO_PCF857X if I2C - help - Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. - -choice - prompt "Select DA830/OMAP-L137/AM17x UI board peripheral" - depends on MACH_DAVINCI_DA830_EVM - help - The presence of UI card on the DA830/OMAP-L137/AM17x EVM is - detected automatically based on successful probe of the I2C - based GPIO expander on that board. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA830_UI_LCD - bool "LCD" - help - Say Y here to use the LCD as a framebuffer or simple character - display. - -config DA830_UI_NAND - bool "NAND flash" - help - Say Y here to use the NAND flash. Do not forget to setup - the switch correctly. -endchoice - -config MACH_DAVINCI_DA850_EVM - bool "TI DA850/OMAP-L138/AM18x Reference Platform" - depends on ATAGS && UNUSED_BOARD_FILES - default ARCH_DAVINCI_DA850 - depends on ARCH_DAVINCI_DA850 - help - Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module. - -choice - prompt "Select peripherals connected to expander on UI board" - depends on MACH_DAVINCI_DA850_EVM - help - The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x - EVM is detected automatically based on successful probe of the I2C - based GPIO expander on that card. This option selected in this - menu has an effect only in case of a successful UI card detection. - -config DA850_UI_NONE - bool "No peripheral is enabled" - help - Say Y if you do not want to enable any of the peripherals connected - to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card - -config DA850_UI_RMII - bool "RMII Ethernet PHY" - help - Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x - EVM. This PHY is found on the UI daughter card that is supplied with - the EVM. - NOTE: Please take care while choosing this option, MII PHY will - not be functional if RMII mode is selected. - -config DA850_UI_SD_VIDEO_PORT - bool "Video Port Interface" - help - Say Y if you want to use Video Port Interface (VPIF) on the - DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the - UI daughter card that is supplied with the EVM. - -endchoice - -config MACH_MITYOMAPL138 - bool "Critical Link MityDSP-L138/MityARM-1808 SoM" - depends on ARCH_DAVINCI_DA850 - depends on ATAGS && UNUSED_BOARD_FILES - help - Say Y here to select the Critical Link MityDSP-L138/MityARM-1808 - System on Module. Information on this SoM may be found at - https://www.mitydsp.com - -config MACH_OMAPL138_HAWKBOARD - bool "TI AM1808 / OMAPL-138 Hawkboard platform" - depends on ARCH_DAVINCI_DA850 - depends on ATAGS && UNUSED_BOARD_FILES - help - Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform . - config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI |