diff options
Diffstat (limited to 'arch/arm/mach-mmp/pxa910.c')
| -rw-r--r-- | arch/arm/mach-mmp/pxa910.c | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c deleted file mode 100644 index b19a069d9fab..000000000000 --- a/arch/arm/mach-mmp/pxa910.c +++ /dev/null @@ -1,190 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-mmp/pxa910.c - * - * Code specific to PXA910 - */ -#include <linux/clk/mmp.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqchip/mmp.h> -#include <linux/platform_device.h> - -#include <asm/hardware/cache-tauros2.h> -#include <asm/mach/time.h> -#include "addr-map.h" -#include "regs-apbc.h" -#include <linux/soc/mmp/cputype.h> -#include "irqs.h" -#include "mfp.h" -#include "devices.h" -#include "pm-pxa910.h" -#include "pxa910.h" - -#include "common.h" - -#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000) - -static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata = -{ - MFP_ADDR_X(GPIO0, GPIO54, 0xdc), - MFP_ADDR_X(GPIO67, GPIO98, 0x1b8), - MFP_ADDR_X(GPIO100, GPIO109, 0x238), - - MFP_ADDR(GPIO123, 0xcc), - MFP_ADDR(GPIO124, 0xd0), - - MFP_ADDR(DF_IO0, 0x40), - MFP_ADDR(DF_IO1, 0x3c), - MFP_ADDR(DF_IO2, 0x38), - MFP_ADDR(DF_IO3, 0x34), - MFP_ADDR(DF_IO4, 0x30), - MFP_ADDR(DF_IO5, 0x2c), - MFP_ADDR(DF_IO6, 0x28), - MFP_ADDR(DF_IO7, 0x24), - MFP_ADDR(DF_IO8, 0x20), - MFP_ADDR(DF_IO9, 0x1c), - MFP_ADDR(DF_IO10, 0x18), - MFP_ADDR(DF_IO11, 0x14), - MFP_ADDR(DF_IO12, 0x10), - MFP_ADDR(DF_IO13, 0xc), - MFP_ADDR(DF_IO14, 0x8), - MFP_ADDR(DF_IO15, 0x4), - - MFP_ADDR(DF_nCS0_SM_nCS2, 0x44), - MFP_ADDR(DF_nCS1_SM_nCS3, 0x48), - MFP_ADDR(SM_nCS0, 0x4c), - MFP_ADDR(SM_nCS1, 0x50), - MFP_ADDR(DF_WEn, 0x54), - MFP_ADDR(DF_REn, 0x58), - MFP_ADDR(DF_CLE_SM_OEn, 0x5c), - MFP_ADDR(DF_ALE_SM_WEn, 0x60), - MFP_ADDR(SM_SCLK, 0x64), - MFP_ADDR(DF_RDY0, 0x68), - MFP_ADDR(SM_BE0, 0x6c), - MFP_ADDR(SM_BE1, 0x70), - MFP_ADDR(SM_ADV, 0x74), - MFP_ADDR(DF_RDY1, 0x78), - MFP_ADDR(SM_ADVMUX, 0x7c), - MFP_ADDR(SM_RDY, 0x80), - - MFP_ADDR_X(MMC1_DAT7, MMC1_WP, 0x84), - - MFP_ADDR_END, -}; - -void __init pxa910_init_irq(void) -{ - icu_init_irq(); -#ifdef CONFIG_PM - icu_irq_chip.irq_set_wake = pxa910_set_wake; -#endif -} - -static int __init pxa910_init(void) -{ - if (cpu_is_pxa910()) { -#ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(0); -#endif - mfp_init_base(MFPR_VIRT_BASE); - mfp_init_addr(pxa910_mfp_addr_map); - pxa910_clk_init(APB_PHYS_BASE + 0x50000, - AXI_PHYS_BASE + 0x82800, - APB_PHYS_BASE + 0x15000, - APB_PHYS_BASE + 0x3b000); - } - - return 0; -} -postcore_initcall(pxa910_init); - -/* system timer - clock enabled, 3.25MHz */ -#define TIMER_CLK_RST (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3)) -#define APBC_TIMERS APBC_REG(0x34) - -void __init pxa910_timer_init(void) -{ - /* reset and configure */ - __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS); - __raw_writel(TIMER_CLK_RST, APBC_TIMERS); - - mmp_timer_init(IRQ_PXA910_AP1_TIMER1, 3250000); -} - -/* on-chip devices */ - -/* NOTE: there are totally 3 UARTs on PXA910: - * - * UART1 - Slow UART (can be used both by AP and CP) - * UART2/3 - Fast UART - * - * To be backward compatible with the legacy FFUART/BTUART/STUART sequence, - * they are re-ordered as: - * - * pxa910_device_uart1 - UART2 as FFUART - * pxa910_device_uart2 - UART3 as BTUART - * - * UART1 is not used by AP for the moment. - */ -PXA910_DEVICE(uart1, "pxa2xx-uart", 0, UART2, 0xd4017000, 0x30, 21, 22); -PXA910_DEVICE(uart2, "pxa2xx-uart", 1, UART3, 0xd4018000, 0x30, 23, 24); -PXA910_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); -PXA910_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); -PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10); -PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10); -PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10); -PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10); -PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99); -PXA910_DEVICE(disp, "mmp-disp", 0, LCD, 0xd420b000, 0x1ec); -PXA910_DEVICE(fb, "mmp-fb", -1, NONE, 0, 0); -PXA910_DEVICE(panel, "tpo-hvga", -1, NONE, 0, 0); - -struct resource pxa910_resource_gpio[] = { - { - .start = 0xd4019000, - .end = 0xd4019fff, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PXA910_AP_GPIO, - .end = IRQ_PXA910_AP_GPIO, - .name = "gpio_mux", - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa910_device_gpio = { - .name = "mmp-gpio", - .id = -1, - .num_resources = ARRAY_SIZE(pxa910_resource_gpio), - .resource = pxa910_resource_gpio, -}; - -static struct resource pxa910_resource_rtc[] = { - { - .start = 0xd4010000, - .end = 0xd401003f, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PXA910_RTC_INT, - .end = IRQ_PXA910_RTC_INT, - .name = "rtc 1Hz", - .flags = IORESOURCE_IRQ, - }, { - .start = IRQ_PXA910_RTC_ALARM, - .end = IRQ_PXA910_RTC_ALARM, - .name = "rtc alarm", - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device pxa910_device_rtc = { - .name = "sa1100-rtc", - .id = -1, - .num_resources = ARRAY_SIZE(pxa910_resource_rtc), - .resource = pxa910_resource_rtc, -}; |