diff options
Diffstat (limited to 'arch/arm/mach-pxa')
| -rw-r--r-- | arch/arm/mach-pxa/devices.c | 73 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/devices.h | 5 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/gumstix.c | 31 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/irq.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa25x.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/pxa27x.c | 9 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/sharpsl_pm.c | 14 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/spitz.c | 442 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/spitz_pm.c | 22 |
9 files changed, 352 insertions, 259 deletions
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 661b3fc43275..7695cfce01a1 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -7,7 +7,7 @@ #include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> -#include <linux/spi/pxa2xx_spi.h> +#include <linux/gpio-pxa.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/soc/pxa/cpu.h> @@ -18,6 +18,7 @@ #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmp_dma.h> +#include "mfp-pxa2xx.h" #include "regs-ost.h" #include "reset.h" #include "devices.h" @@ -47,7 +48,7 @@ struct platform_device pxa_device_pmu = { .num_resources = 1, }; -static struct resource pxamci_resources[] = { +static const struct resource pxamci_resources[] = { [0] = { .start = 0x41100000, .end = 0x41100fff, @@ -60,22 +61,26 @@ static struct resource pxamci_resources[] = { }, }; -static u64 pxamci_dmamask = 0xffffffffUL; - -struct platform_device pxa_device_mci = { - .name = "pxa2xx-mci", - .id = 0, - .dev = { - .dma_mask = &pxamci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .num_resources = ARRAY_SIZE(pxamci_resources), - .resource = pxamci_resources, -}; - -void __init pxa_set_mci_info(struct pxamci_platform_data *info) +void __init pxa_set_mci_info(const struct pxamci_platform_data *info, + const struct property_entry *props) { - pxa_register_device(&pxa_device_mci, info); + const struct platform_device_info mci_info = { + .name = "pxa2xx-mci", + .id = 0, + .res = pxamci_resources, + .num_res = ARRAY_SIZE(pxamci_resources), + .data = info, + .size_data = sizeof(*info), + .dma_mask = 0xffffffffUL, + .properties = props, + }; + struct platform_device *mci_dev; + int err; + + mci_dev = platform_device_register_full(&mci_info); + err = PTR_ERR_OR_ZERO(mci_dev); + if (err) + pr_err("Unable to create mci device: %d\n", err); } static struct pxa2xx_udc_mach_info pxa_udc_info = { @@ -628,6 +633,11 @@ struct platform_device pxa27x_device_pwm1 = { }; #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */ +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +const struct software_node pxa2xx_gpiochip_node = { + .name = "gpio-pxa", +}; + struct resource pxa_resource_gpio[] = { { .start = 0x40e00000, @@ -651,11 +661,19 @@ struct resource pxa_resource_gpio[] = { }, }; +static struct pxa_gpio_platform_data pxa2xx_gpio_info = { + .irq_base = PXA_GPIO_TO_IRQ(0), + .gpio_set_wake = gpio_set_wake, +}; + struct platform_device pxa25x_device_gpio = { .name = "pxa25x-gpio", .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, + .dev = { + .platform_data = &pxa2xx_gpio_info, + }, }; struct platform_device pxa27x_device_gpio = { @@ -663,24 +681,11 @@ struct platform_device pxa27x_device_gpio = { .id = -1, .num_resources = ARRAY_SIZE(pxa_resource_gpio), .resource = pxa_resource_gpio, + .dev = { + .platform_data = &pxa2xx_gpio_info, + }, }; - -/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1. - * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */ -void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info) -{ - struct platform_device *pd; - - pd = platform_device_alloc("pxa2xx-spi", id); - if (pd == NULL) { - printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n", - id); - return; - } - - pd->dev.platform_data = info; - platform_device_add(pd); -} +#endif /* CONFIG_PXA25x || CONFIG_PXA27x */ static struct resource pxa_dma_resource[] = { [0] = { diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h index 82c83939017a..72c556ff67db 100644 --- a/arch/arm/mach-pxa/devices.h +++ b/arch/arm/mach-pxa/devices.h @@ -4,7 +4,6 @@ struct mmp_dma_platdata; extern struct platform_device pxa_device_pmu; -extern struct platform_device pxa_device_mci; extern struct platform_device pxa3xx_device_mci2; extern struct platform_device pxa3xx_device_mci3; extern struct platform_device pxa25x_device_udc; @@ -53,8 +52,8 @@ extern struct platform_device pxa_device_asoc_ssp4; extern struct platform_device pxa25x_device_gpio; extern struct platform_device pxa27x_device_gpio; -extern struct platform_device pxa3xx_device_gpio; -extern struct platform_device pxa93x_device_gpio; + +extern const struct software_node pxa2xx_gpiochip_node; void __init pxa_register_device(struct platform_device *dev, void *data); void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index c9f0f62187bd..1713bdf3b71e 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -21,6 +21,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/gpio.h> #include <linux/err.h> #include <linux/clk.h> @@ -40,6 +41,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "gumstix.h" +#include "devices.h" #include "generic.h" @@ -90,7 +92,7 @@ static struct pxamci_platform_data gumstix_mci_platform_data = { static void __init gumstix_mmc_init(void) { - pxa_set_mci_info(&gumstix_mci_platform_data); + pxa_set_mci_info(&gumstix_mci_platform_data, NULL); } #else static void __init gumstix_mmc_init(void) @@ -99,27 +101,24 @@ static void __init gumstix_mmc_init(void) } #endif -#ifdef CONFIG_USB_PXA25X -static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = { - .dev_id = "gpio-vbus", - .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn, - "vbus", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx, - "pullup", GPIO_ACTIVE_HIGH), - { }, - }, +#if IS_ENABLED(CONFIG_USB_PXA25X) +static const struct property_entry gumstix_vbus_props[] __initconst = { + PROPERTY_ENTRY_GPIO("vbus-gpios", &pxa2xx_gpiochip_node, + GPIO_GUMSTIX_USB_GPIOn, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("pullup-gpios", &pxa2xx_gpiochip_node, + GPIO_GUMSTIX_USB_GPIOx, GPIO_ACTIVE_HIGH), + { } }; -static struct platform_device gumstix_gpio_vbus = { - .name = "gpio-vbus", - .id = -1, +static const struct platform_device_info gumstix_gpio_vbus_info __initconst = { + .name = "gpio-vbus", + .id = PLATFORM_DEVID_NONE, + .properties = gumstix_vbus_props, }; static void __init gumstix_udc_init(void) { - gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table); - platform_device_register(&gumstix_gpio_vbus); + platform_device_register_full(&gumstix_gpio_vbus_info); } #else static void gumstix_udc_init(void) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index a9ef71008147..5bfce8aa4102 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -147,12 +147,11 @@ pxa_init_irq_common(struct device_node *node, int irq_nr, int n; pxa_internal_irq_nr = irq_nr; - pxa_irq_domain = irq_domain_add_legacy(node, irq_nr, - PXA_IRQ(0), 0, - &pxa_irq_ops, NULL); + pxa_irq_domain = irq_domain_create_legacy(of_fwnode_handle(node), irq_nr, PXA_IRQ(0), 0, + &pxa_irq_ops, NULL); if (!pxa_irq_domain) panic("Unable to add PXA IRQ domain\n"); - irq_set_default_host(pxa_irq_domain); + irq_set_default_domain(pxa_irq_domain); for (n = 0; n < irq_nr; n += 32) { void __iomem *base = irq_base(n >> 5); diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 02712d24be82..03e34841fc00 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -178,12 +178,8 @@ void __init pxa25x_map_io(void) pxa25x_get_clk_frequency_khz(1); } -static struct pxa_gpio_platform_data pxa25x_gpio_info __initdata = { - .irq_base = PXA_GPIO_TO_IRQ(0), - .gpio_set_wake = gpio_set_wake, -}; - static struct platform_device *pxa25x_devices[] __initdata = { + &pxa25x_device_gpio, &pxa25x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -243,8 +239,8 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); if (!of_have_populated_dt()) { + software_node_register(&pxa2xx_gpiochip_node); pxa2xx_set_dmac_info(&pxa25x_dma_pdata); - pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, ARRAY_SIZE(pxa25x_devices)); } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index d71491e2e1d6..f8382477d629 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -276,12 +276,8 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } -static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { - .irq_base = PXA_GPIO_TO_IRQ(0), - .gpio_set_wake = gpio_set_wake, -}; - static struct platform_device *devices[] __initdata = { + &pxa27x_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -345,8 +341,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); if (!of_have_populated_dt()) { - pxa_register_device(&pxa27x_device_gpio, - &pxa27x_gpio_info); + software_node_register(&pxa2xx_gpiochip_node); pxa2xx_set_dmac_info(&pxa27x_dma_pdata); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 72fa2e3fd353..71b282b146d0 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -31,10 +31,10 @@ /* * Constants */ -#define SHARPSL_CHARGE_ON_TIME_INTERVAL (msecs_to_jiffies(1*60*1000)) /* 1 min */ -#define SHARPSL_CHARGE_FINISH_TIME (msecs_to_jiffies(10*60*1000)) /* 10 min */ -#define SHARPSL_BATCHK_TIME (msecs_to_jiffies(15*1000)) /* 15 sec */ -#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ +#define SHARPSL_CHARGE_ON_TIME_INTERVAL (secs_to_jiffies(60)) +#define SHARPSL_CHARGE_FINISH_TIME (secs_to_jiffies(10*60)) +#define SHARPSL_BATCHK_TIME (secs_to_jiffies(15)) +#define SHARPSL_BATCHK_TIME_SUSPEND (60*10) /* 10 min */ #define SHARPSL_WAIT_CO_TIME 15 /* 15 sec */ #define SHARPSL_WAIT_DISCHARGE_ON 100 /* 100 msec */ @@ -913,13 +913,13 @@ static void sharpsl_pm_remove(struct platform_device *pdev) if (sharpsl_pm.machinfo->exit) sharpsl_pm.machinfo->exit(); - del_timer_sync(&sharpsl_pm.chrg_full_timer); - del_timer_sync(&sharpsl_pm.ac_timer); + timer_delete_sync(&sharpsl_pm.chrg_full_timer); + timer_delete_sync(&sharpsl_pm.ac_timer); } static struct platform_driver sharpsl_pm_driver = { .probe = sharpsl_pm_probe, - .remove_new = sharpsl_pm_remove, + .remove = sharpsl_pm_remove, .suspend = sharpsl_pm_suspend, .resume = sharpsl_pm_resume, .driver = { diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index cc691b199429..33533e35720f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -14,20 +14,22 @@ #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> +#include <linux/gpio/property.h> #include <linux/leds.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> +#include <linux/property.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/spi/corgi_lcd.h> -#include <linux/spi/pxa2xx_spi.h> #include <linux/mtd/sharpsl.h> #include <linux/mtd/physmap.h> #include <linux/input-event-codes.h> #include <linux/input/matrix_keypad.h> #include <linux/regulator/machine.h> #include <linux/io.h> +#include <linux/property.h> #include <linux/reboot.h> #include <linux/memblock.h> @@ -128,6 +130,19 @@ static unsigned long spitz_pin_config[] __initdata = { GPIO1_GPIO | WAKEUP_ON_EDGE_FALL, /* SPITZ_GPIO_RESET */ }; +static const struct software_node spitz_scoop_1_gpiochip_node = { + .name = "sharp-scoop.0", +}; + +/* Only on Spitz */ +static const struct software_node spitz_scoop_2_gpiochip_node = { + .name = "sharp-scoop.1", +}; + +/* Only on Akita */ +static const struct software_node akita_max7310_gpiochip_node = { + .name = "i2c-max7310", +}; /****************************************************************************** * Scoop GPIO expander @@ -363,38 +378,56 @@ static const uint32_t spitz_keymap[] = { KEY(6, 8, KEY_RIGHT), }; -static const struct matrix_keymap_data spitz_keymap_data = { - .keymap = spitz_keymap, - .keymap_size = ARRAY_SIZE(spitz_keymap), +static const struct software_node_ref_args spitz_mkp_row_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 12, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 17, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 91, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 34, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 36, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 38, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 39, GPIO_ACTIVE_HIGH), }; -static const uint32_t spitz_row_gpios[] = - { 12, 17, 91, 34, 36, 38, 39 }; -static const uint32_t spitz_col_gpios[] = - { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 }; - -static struct matrix_keypad_platform_data spitz_mkp_pdata = { - .keymap_data = &spitz_keymap_data, - .row_gpios = spitz_row_gpios, - .col_gpios = spitz_col_gpios, - .num_row_gpios = ARRAY_SIZE(spitz_row_gpios), - .num_col_gpios = ARRAY_SIZE(spitz_col_gpios), - .col_scan_delay_us = 10, - .debounce_ms = 10, - .wakeup = 1, +static const struct software_node_ref_args spitz_mkp_col_gpios[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 88, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 23, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 24, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 25, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 26, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 27, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 52, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 103, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 107, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 108, GPIO_ACTIVE_HIGH), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, 114, GPIO_ACTIVE_HIGH), }; -static struct platform_device spitz_mkp_device = { +static const struct property_entry spitz_mkp_properties[] = { + PROPERTY_ENTRY_U32_ARRAY("linux,keymap", spitz_keymap), + PROPERTY_ENTRY_REF_ARRAY("row-gpios", spitz_mkp_row_gpios), + PROPERTY_ENTRY_REF_ARRAY("col-gpios", spitz_mkp_col_gpios), + PROPERTY_ENTRY_U32("col-scan-delay-us", 10), + PROPERTY_ENTRY_U32("debounce-delay-ms", 10), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } +}; + +static const struct platform_device_info spitz_mkp_info __initconst = { .name = "matrix-keypad", - .id = -1, - .dev = { - .platform_data = &spitz_mkp_pdata, - }, + .id = PLATFORM_DEVID_NONE, + .properties = spitz_mkp_properties, }; + static void __init spitz_mkp_init(void) { - platform_device_register(&spitz_mkp_device); + struct platform_device *pd; + int err; + + pd = platform_device_register_full(&spitz_mkp_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create keypad device: %d\n", err); } #else static inline void spitz_mkp_init(void) {} @@ -404,45 +437,82 @@ static inline void spitz_mkp_init(void) {} * GPIO keys ******************************************************************************/ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -static struct gpio_keys_button spitz_gpio_keys[] = { - { - .type = EV_PWR, - .code = KEY_SUSPEND, - .gpio = SPITZ_GPIO_ON_KEY, - .desc = "On Off", - .wakeup = 1, - }, - /* Two buttons detecting the lid state */ - { - .type = EV_SW, - .code = 0, - .gpio = SPITZ_GPIO_SWA, - .desc = "Display Down", - }, - { - .type = EV_SW, - .code = 1, - .gpio = SPITZ_GPIO_SWB, - .desc = "Lid Closed", - }, +static const struct software_node spitz_gpio_keys_node = { + .name = "spitz-gpio-keys", }; -static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { - .buttons = spitz_gpio_keys, - .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +static const struct property_entry spitz_suspend_key_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_PWR), + PROPERTY_ENTRY_U32("linux,code", KEY_SUSPEND), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_ON_KEY, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "On Off"), + PROPERTY_ENTRY_BOOL("wakeup-source"), + { } }; -static struct platform_device spitz_gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &spitz_gpio_keys_platform_data, - }, +static const struct software_node spitz_suspend_key_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_suspend_key_props, +}; + +static const struct property_entry spitz_sw1_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 0), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWA, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Display Down"), + { } +}; + +static const struct software_node spitz_sw1_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw1_props, +}; + +static const struct property_entry spitz_sw2_props[] = { + PROPERTY_ENTRY_U32("linux,input-type", EV_SW), + PROPERTY_ENTRY_U32("linux,code", 1), + PROPERTY_ENTRY_GPIO("gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_SWB, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_STRING("label", "Lid Closed"), + { } +}; + +static const struct software_node spitz_sw2_node = { + .parent = &spitz_gpio_keys_node, + .properties = spitz_sw2_props, +}; + +static const struct software_node *spitz_gpio_keys_swnodes[] = { + &spitz_gpio_keys_node, + &spitz_suspend_key_node, + &spitz_sw1_node, + &spitz_sw2_node, + NULL }; static void __init spitz_keys_init(void) { - platform_device_register(&spitz_gpio_keys_device); + struct platform_device_info keys_info = { + .name = "gpio-keys", + .id = PLATFORM_DEVID_NONE, + }; + struct platform_device *pd; + int err; + + err = software_node_register_node_group(spitz_gpio_keys_swnodes); + if (err) { + pr_err("failed to register gpio-keys software nodes: %d\n", err); + return; + } + + keys_info.fwnode = software_node_fwnode(&spitz_gpio_keys_node); + + pd = platform_device_register_full(&keys_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("failed to create gpio-keys device: %d\n", err); } #else static inline void spitz_keys_init(void) {} @@ -452,35 +522,64 @@ static inline void spitz_keys_init(void) {} * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -static struct gpio_led spitz_gpio_leds[] = { - { - .name = "spitz:amber:charge", - .default_trigger = "sharpsl-charge", - .gpio = SPITZ_GPIO_LED_ORANGE, - }, - { - .name = "spitz:green:hddactivity", - .default_trigger = "disk-activity", - .gpio = SPITZ_GPIO_LED_GREEN, - }, +static const struct software_node spitz_gpio_leds_node = { + .name = "spitz-leds", }; -static struct gpio_led_platform_data spitz_gpio_leds_info = { - .leds = spitz_gpio_leds, - .num_leds = ARRAY_SIZE(spitz_gpio_leds), +static const struct property_entry spitz_orange_led_props[] = { + PROPERTY_ENTRY_STRING("linux,default-trigger", "sharpsl-charge"), + PROPERTY_ENTRY_GPIO("gpios", + &spitz_scoop_1_gpiochip_node, 6, GPIO_ACTIVE_HIGH), + { } }; -static struct platform_device spitz_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &spitz_gpio_leds_info, - }, +static const struct software_node spitz_orange_led_node = { + .name = "spitz:amber:charge", + .parent = &spitz_gpio_leds_node, + .properties = spitz_orange_led_props, +}; + +static const struct property_entry spitz_green_led_props[] = { + PROPERTY_ENTRY_STRING("linux,default-trigger", "disk-activity"), + PROPERTY_ENTRY_GPIO("gpios", + &spitz_scoop_1_gpiochip_node, 0, GPIO_ACTIVE_HIGH), + { } +}; + +static const struct software_node spitz_green_led_node = { + .name = "spitz:green:hddactivity", + .parent = &spitz_gpio_leds_node, + .properties = spitz_green_led_props, +}; + +static const struct software_node *spitz_gpio_leds_swnodes[] = { + &spitz_gpio_leds_node, + &spitz_orange_led_node, + &spitz_green_led_node, + NULL }; static void __init spitz_leds_init(void) { - platform_device_register(&spitz_led_device); + struct platform_device_info led_info = { + .name = "leds-gpio", + .id = PLATFORM_DEVID_NONE, + }; + struct platform_device *led_dev; + int err; + + err = software_node_register_node_group(spitz_gpio_leds_swnodes); + if (err) { + pr_err("failed to register LED software nodes: %d\n", err); + return; + } + + led_info.fwnode = software_node_fwnode(&spitz_gpio_leds_node); + + led_dev = platform_device_register_full(&led_info); + err = PTR_ERR_OR_ZERO(led_dev); + if (err) + pr_err("failed to create LED device: %d\n", err); } #else static inline void spitz_leds_init(void) {} @@ -490,53 +589,43 @@ static inline void spitz_leds_init(void) {} * SSP Devices ******************************************************************************/ #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) -static void spitz_ads7846_wait_for_hsync(void) -{ - while (gpio_get_value(SPITZ_GPIO_HSYNC)) - cpu_relax(); - while (!gpio_get_value(SPITZ_GPIO_HSYNC)) - cpu_relax(); -} +static const struct property_entry spitz_ads7846_props[] = { + PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024), + PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419), + PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486), + PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100), + PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW), + { } +}; -static struct ads7846_platform_data spitz_ads7846_info = { - .model = 7846, - .vref_delay_usecs = 100, - .x_plate_ohms = 419, - .y_plate_ohms = 486, - .pressure_max = 1024, - .wait_for_sync = spitz_ads7846_wait_for_hsync, +static const struct software_node spitz_ads7846_swnode = { + .name = "ads7846", + .properties = spitz_ads7846_props, }; -static struct gpiod_lookup_table spitz_ads7846_gpio_table = { - .dev_id = "spi2.0", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT, - "pendown", GPIO_ACTIVE_LOW), - { } - }, +static const struct property_entry spitz_lcdcon_props[] = { + PROPERTY_ENTRY_GPIO("BL_CONT-gpios", + &spitz_scoop_2_gpiochip_node, 6, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("BL_ON-gpios", + &spitz_scoop_2_gpiochip_node, 7, GPIO_ACTIVE_HIGH), + { } }; -static struct gpiod_lookup_table spitz_lcdcon_gpio_table = { - .dev_id = "spi2.1", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_CONT, - "BL_CONT", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_BACKLIGHT_ON, - "BL_ON", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry akita_lcdcon_props[] = { + PROPERTY_ENTRY_GPIO("BL_ON-gpios", + &akita_max7310_gpiochip_node, 3, GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("BL_CONT-gpios", + &akita_max7310_gpiochip_node, 4, GPIO_ACTIVE_LOW), + { } }; -static struct gpiod_lookup_table akita_lcdcon_gpio_table = { - .dev_id = "spi2.1", - .table = { - GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_CONT, - "BL_CONT", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", AKITA_GPIO_BACKLIGHT_ON, - "BL_ON", GPIO_ACTIVE_HIGH), - { }, - }, +static struct software_node spitz_lcdcon_node = { + .name = "spitz-lcdcon", }; static struct corgi_lcd_platform_data spitz_lcdcon_info = { @@ -553,7 +642,7 @@ static struct spi_board_info spitz_spi_devices[] = { .max_speed_hz = 1200000, .bus_num = 2, .chip_select = 0, - .platform_data = &spitz_ads7846_info, + .swnode = &spitz_ads7846_swnode, .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", @@ -561,6 +650,7 @@ static struct spi_board_info spitz_spi_devices[] = { .bus_num = 2, .chip_select = 1, .platform_data = &spitz_lcdcon_info, + .swnode = &spitz_lcdcon_node, }, { .modalias = "max1111", .max_speed_hz = 450000, @@ -569,30 +659,40 @@ static struct spi_board_info spitz_spi_devices[] = { }, }; -static struct pxa2xx_spi_controller spitz_spi_info = { - .num_chipselect = 3, +static const struct software_node_ref_args spitz_spi_gpio_refs[] = { + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_ADS7846_CS, + GPIO_ACTIVE_LOW), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_LCDCON_CS, + GPIO_ACTIVE_LOW), + SOFTWARE_NODE_REFERENCE(&pxa2xx_gpiochip_node, SPITZ_GPIO_MAX1111_CS, + GPIO_ACTIVE_LOW), }; -static struct gpiod_lookup_table spitz_spi_gpio_table = { - .dev_id = "spi2", - .table = { - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW), - GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW), - { }, - }, +static const struct property_entry spitz_spi_properties[] = { + PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs), + { } +}; + +static const struct platform_device_info spitz_spi_device_info = { + .name = "pxa2xx-spi", + /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1 */ + .id = 2, + .properties = spitz_spi_properties, }; static void __init spitz_spi_init(void) { - if (machine_is_akita()) - gpiod_add_lookup_table(&akita_lcdcon_gpio_table); - else - gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); + struct platform_device *pd; + int err; + + pd = platform_device_register_full(&spitz_spi_device_info); + err = PTR_ERR_OR_ZERO(pd); + if (err) + pr_err("pxa2xx-spi: failed to instantiate SPI controller: %d\n", + err); - gpiod_add_lookup_table(&spitz_ads7846_gpio_table); - gpiod_add_lookup_table(&spitz_spi_gpio_table); - pxa2xx_set_spi_info(2, &spitz_spi_info); + spitz_lcdcon_node.properties = machine_is_akita() ? + akita_lcdcon_props : spitz_lcdcon_props; spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); } #else @@ -625,21 +725,17 @@ static struct pxamci_platform_data spitz_mci_platform_data = { .setpower = spitz_mci_setpower, }; -static struct gpiod_lookup_table spitz_mci_gpio_table = { - .dev_id = "pxa2xx-mci.0", - .table = { - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_DETECT, - "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_nSD_WP, - "wp", GPIO_ACTIVE_LOW), - { }, - }, +static const struct property_entry spitz_mci_props[] __initconst = { + PROPERTY_ENTRY_GPIO("cd-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_nSD_DETECT, GPIO_ACTIVE_LOW), + PROPERTY_ENTRY_GPIO("wp-gpios", &pxa2xx_gpiochip_node, + SPITZ_GPIO_nSD_WP, GPIO_ACTIVE_LOW), + { } }; static void __init spitz_mmc_init(void) { - gpiod_add_lookup_table(&spitz_mci_gpio_table); - pxa_set_mci_info(&spitz_mci_platform_data); + pxa_set_mci_info(&spitz_mci_platform_data, spitz_mci_props); } #else static inline void spitz_mmc_init(void) {} @@ -938,30 +1034,24 @@ static void __init spitz_i2c_init(void) static inline void spitz_i2c_init(void) {} #endif -static struct gpiod_lookup_table spitz_audio_gpio_table = { - .dev_id = "spitz-audio", - .table = { - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, - "mute-l", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, - "mute-r", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE, - "mic", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry spitz_audio_props[] = { + PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mic-gpios", &spitz_scoop_2_gpiochip_node, 8, + GPIO_ACTIVE_HIGH), + { } }; -static struct gpiod_lookup_table akita_audio_gpio_table = { - .dev_id = "spitz-audio", - .table = { - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, - "mute-l", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, - "mute-r", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE, - "mic", GPIO_ACTIVE_HIGH), - { }, - }, +static const struct property_entry akita_audio_props[] = { + PROPERTY_ENTRY_GPIO("mute-l-gpios", &spitz_scoop_1_gpiochip_node, 3, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mute-r-gpios", &spitz_scoop_1_gpiochip_node, 4, + GPIO_ACTIVE_HIGH), + PROPERTY_ENTRY_GPIO("mic-gpios", &akita_max7310_gpiochip_node, 2, + GPIO_ACTIVE_HIGH), + { } }; /****************************************************************************** @@ -969,12 +1059,14 @@ static struct gpiod_lookup_table akita_audio_gpio_table = { ******************************************************************************/ static inline void spitz_audio_init(void) { - if (machine_is_akita()) - gpiod_add_lookup_table(&akita_audio_gpio_table); - else - gpiod_add_lookup_table(&spitz_audio_gpio_table); - - platform_device_register_simple("spitz-audio", -1, NULL, 0); + struct platform_device_info audio_info = { + .name = "spitz-audio", + .id = PLATFORM_DEVID_NONE, + .properties = machine_is_akita() ? + akita_audio_props : spitz_audio_props, + }; + + platform_device_register_full(&audio_info); } /****************************************************************************** @@ -997,6 +1089,12 @@ static void spitz_restart(enum reboot_mode mode, const char *cmd) static void __init spitz_init(void) { + software_node_register(&spitz_scoop_1_gpiochip_node); + if (machine_is_akita()) + software_node_register(&akita_max7310_gpiochip_node); + else + software_node_register(&spitz_scoop_2_gpiochip_node); + init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0); pm_power_off = spitz_poweroff; diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 8bc4ea51a0c1..03b4b347f11a 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -35,18 +35,20 @@ static int spitz_last_ac_status; -static struct gpio spitz_charger_gpios[] = { - { SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" }, - { SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" }, - { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" }, - { SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" }, - { SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" }, - { SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" }, -}; - static void spitz_charger_init(void) { - gpio_request_array(ARRAY_AND_SIZE(spitz_charger_gpios)); + gpio_request(SPITZ_GPIO_KEY_INT, "Keyboard Interrupt"); + gpio_direction_input(SPITZ_GPIO_KEY_INT); + gpio_request(SPITZ_GPIO_SYNC, "Sync"); + gpio_direction_input(SPITZ_GPIO_SYNC); + gpio_request(SPITZ_GPIO_AC_IN, "Charger Detection"); + gpio_direction_input(SPITZ_GPIO_AC_IN); + gpio_request(SPITZ_GPIO_ADC_TEMP_ON, "ADC Temp On"); + gpio_direction_output(SPITZ_GPIO_ADC_TEMP_ON, 0); + gpio_request(SPITZ_GPIO_JK_B, "JK B"); + gpio_direction_output(SPITZ_GPIO_JK_B, 0); + gpio_request(SPITZ_GPIO_CHRG_ON, "Charger On"); + gpio_direction_output(SPITZ_GPIO_CHRG_ON, 0); } static void spitz_measure_temp(int on) |