diff options
Diffstat (limited to 'arch/arm/mach-s3c/Kconfig.s3c64xx')
| -rw-r--r-- | arch/arm/mach-s3c/Kconfig.s3c64xx | 216 |
1 files changed, 0 insertions, 216 deletions
diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx index 0c1b91c3ac5f..8f40af063ad6 100644 --- a/arch/arm/mach-s3c/Kconfig.s3c64xx +++ b/arch/arm/mach-s3c/Kconfig.s3c64xx @@ -15,7 +15,6 @@ menuconfig ARCH_S3C64XX select HAVE_TCM select PLAT_SAMSUNG select PM_GENERIC_DOMAINS if PM - select S3C_DEV_NAND if ATAGS select S3C_GPIO_TRACK if ATAGS select S3C2410_WATCHDOG select SAMSUNG_ATAGS if ATAGS @@ -54,17 +53,6 @@ config S3C64XX_SETUP_SDHCI Internal configuration for default SDHCI setup for S3C6400 and S3C6410 SoCs. -config S3C64XX_DEV_ONENAND1 - bool - help - Compile in platform device definition for OneNAND1 controller - -config SAMSUNG_DEV_BACKLIGHT - bool - depends on SAMSUNG_DEV_PWM - help - Compile in platform device definition LCD backlight with PWM Timer - # platform specific device setup config S3C64XX_SETUP_I2C0 @@ -81,11 +69,6 @@ config S3C64XX_SETUP_I2C1 help Common setup code for i2c bus 1. -config S3C64XX_SETUP_IDE - bool - help - Common setup code for S3C64XX IDE. - config S3C64XX_SETUP_FB_24BPP bool help @@ -113,201 +96,6 @@ config S3C64XX_SETUP_USB_PHY # S36400 Macchine support -config MACH_SMDK6400 - bool "SMDK6400" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6400 - select S3C64XX_SETUP_SDHCI - select S3C_DEV_HSMMC1 - help - Machine support for the Samsung SMDK6400 - -# S3C6410 machine support - -config MACH_ANW6410 - bool "A&W6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - help - Machine support for the A&W6410 - -config MACH_MINI6410 - bool "MINI6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the FriendlyARM MINI6410 - -config MACH_REAL6410 - bool "REAL6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_TS - help - Machine support for the CoreWind REAL6410 - -config MACH_SMDK6410 - bool "SMDK6410" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE - select S3C64XX_SETUP_KEYPAD - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_BACKLIGHT - select SAMSUNG_DEV_IDE - select SAMSUNG_DEV_KEYPAD - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Machine support for the Samsung SMDK6410 - -# At least some of the SMDK6410s were shipped with the card detect -# for the MMC/SD slots connected to the same input. This means that -# either the boards need to be altered to have channel0 to an alternate -# configuration or that only one slot can be used. - -choice - prompt "SMDK6410 MMC/SD slot setup" - depends on MACH_SMDK6410 - -config SMDK6410_SD_CH0 - bool "Use channel 0 only" - depends on MACH_SMDK6410 - help - Select CON7 (channel 0) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -config SMDK6410_SD_CH1 - bool "Use channel 1 only" - depends on MACH_SMDK6410 - help - Select CON6 (channel 1) as the MMC/SD slot, as - at least some SMDK6410 boards come with the - resistors fitted so that the card detects for - channels 0 and 1 are the same. - -endchoice - -config SMDK6410_WM1190_EV1 - bool "Support Wolfson Microelectronics 1190-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM8350_I2C - select REGULATOR - select REGULATOR_WM8350 - help - The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC - and audio daughtercard for the Samsung SMDK6410 reference - platform. Enabling this option will build support for this - module into the kernel. The presence of the module will be - detected at runtime so the resulting kernel can be used - with or without the 1190-EV1 fitted. - -config SMDK6410_WM1192_EV1 - bool "Support Wolfson Microelectronics 1192-EV1 PMIC card" - depends on MACH_SMDK6410 - depends on I2C=y - select MFD_WM831X - select MFD_WM831X_I2C - select REGULATOR - select REGULATOR_WM831X - help - The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC - daughtercard for the Samsung SMDK6410 reference platform. - Enabling this option will build support for this module into - the kernel. The presence of the daughtercard will be - detected at runtime so the resulting kernel can be used - with or without the 1192-EV1 fitted. - -config MACH_NCP - bool "NCP" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_I2C1 - select S3C_DEV_HSMMC1 - select S3C_DEV_I2C1 - help - Machine support for the Samsung NCP - -config MACH_HMT - bool "Airgoo HMT" - depends on ATAGS && UNUSED_BOARD_FILES - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C_DEV_FB - select S3C_DEV_NAND - select S3C_DEV_USB_HOST - select SAMSUNG_DEV_PWM - help - Machine support for the Airgoo HMT - -config MACH_SMARTQ - bool - select CPU_S3C6410 - select S3C64XX_SETUP_FB_24BPP - select S3C64XX_SETUP_SDHCI - select S3C64XX_SETUP_USB_PHY - select S3C_DEV_FB - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HWMON - select S3C_DEV_RTC - select S3C_DEV_USB_HOST - select S3C_DEV_USB_HSOTG - select SAMSUNG_DEV_ADC - select SAMSUNG_DEV_PWM - select SAMSUNG_DEV_TS - help - Shared machine support for SmartQ 5/7 - -config MACH_SMARTQ5 - bool "SmartQ 5" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 5 - -config MACH_SMARTQ7 - bool "SmartQ 7" - depends on ATAGS && UNUSED_BOARD_FILES - select MACH_SMARTQ - help - Machine support for the SmartQ 7 - config MACH_WLF_CRAGG_6410 bool "Wolfson Cragganmore 6410" depends on ATAGS @@ -317,7 +105,6 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_DEV_SPI0 select S3C64XX_SETUP_FB_24BPP select S3C64XX_SETUP_I2C1 - select S3C64XX_SETUP_IDE select S3C64XX_SETUP_KEYPAD select S3C64XX_SETUP_SDHCI select S3C64XX_SETUP_SPI @@ -327,11 +114,8 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 - select S3C_DEV_RTC select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG - select S3C_DEV_WDT - select SAMSUNG_DEV_ADC select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM help |