1 files changed, 0 insertions, 130 deletions
diff --git a/arch/arm/mach-s3c/s3c2410.c b/arch/arm/mach-s3c/s3c2410.c
deleted file mode 100644
index 4d39d9939c2f..000000000000
--- a/arch/arm/mach-s3c/s3c2410.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-//
-// Copyright (c) 2003-2005 Simtec Electronics
-//	Ben Dooks <ben@simtec.co.uk>
-//
-// http://www.simtec.co.uk/products/EB2410ITX/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "map.h"
-#include "gpio-samsung.h"
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-
-
-#include "regs-clock.h"
-
-#include "cpu.h"
-#include "devs.h"
-#include "pm.h"
-
-#include "gpio-core.h"
-#include "gpio-cfg.h"
-#include "gpio-cfg-helpers.h"
-
-#include "s3c24xx.h"
-
-/* Initial IO mappings */
-
-static struct map_desc s3c2410_iodesc[] __initdata __maybe_unused = {
-	IODESC_ENT(CLKPWR),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(WATCHDOG),
-};
-
-/* our uart devices */
-
-/* uart registration process */
-
-void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	s3c24xx_init_uartdevs("s3c2410-uart", s3c2410_uart_resources, cfg, no);
-}
-
-/* s3c2410_map_io
- *
- * register the standard cpu IO areas, and any passed in from the
- * machine specific initialisation.
-*/
-
-void __init s3c2410_map_io(void)
-{
-	s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up;
-
-	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
-}
-
-struct bus_type s3c2410_subsys = {
-	.name = "s3c2410-core",
-	.dev_name = "s3c2410-core",
-};
-
-/* Note, we would have liked to name this s3c2410-core, but we cannot
- * register two subsystems with the same name.
- */
-struct bus_type s3c2410a_subsys = {
-	.name = "s3c2410a-core",
-	.dev_name = "s3c2410a-core",
-};
-
-static struct device s3c2410_dev = {
-	.bus		= &s3c2410_subsys,
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2410 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2410_core_init(void)
-{
-	return subsys_system_register(&s3c2410_subsys, NULL);
-}
-
-core_initcall(s3c2410_core_init);
-
-static int __init s3c2410a_core_init(void)
-{
-	return subsys_system_register(&s3c2410a_subsys, NULL);
-}
-
-core_initcall(s3c2410a_core_init);
-
-int __init s3c2410_init(void)
-{
-	printk("S3C2410: Initialising architecture\n");
-
-#ifdef CONFIG_PM_SLEEP
-	register_syscore_ops(&s3c2410_pm_syscore_ops);
-	register_syscore_ops(&s3c24xx_irq_syscore_ops);
-#endif
-
-	return device_register(&s3c2410_dev);
-}
-
-int __init s3c2410a_init(void)
-{
-	s3c2410_dev.bus = &s3c2410a_subsys;
-	return s3c2410_init();
-}