diff options
Diffstat (limited to 'arch/arm64/Kconfig.platforms')
-rw-r--r-- | arch/arm64/Kconfig.platforms | 109 |
1 files changed, 73 insertions, 36 deletions
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 74e9e9de3759..24335565bad5 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -33,6 +33,11 @@ config ARCH_APPLE This enables support for Apple's in-house ARM SoC family, starting with the Apple M1. +menuconfig ARCH_BCM + bool "Broadcom SoC Support" + +if ARCH_BCM + config ARCH_BCM2835 bool "Broadcom BCM2835 family" select TIMER_OF @@ -47,15 +52,6 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2837 and BCM2711 SoC. These SoCs are used in the Raspberry Pi 3 and 4 devices. -config ARCH_BCM4908 - bool "Broadcom BCM4908 family" - select ARCH_BCMBCA - select GPIOLIB - help - This enables support for the Broadcom BCM4906, BCM4908 and - BCM49408 SoCs. These SoCs use Brahma-B53 cores and can be - found in home routers. - config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC @@ -66,6 +62,7 @@ config ARCH_BCM_IPROC config ARCH_BCMBCA bool "Broadcom Broadband Carrier Access (BCA) origin SoC" + select GPIOLIB help Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based BCA chipset. @@ -73,6 +70,16 @@ config ARCH_BCMBCA This enables support for Broadcom BCA ARM-based broadband chipsets, including the DSL, PON and Wireless family of chips. +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select ARCH_HAS_RESET_CONTROLLER + select GENERIC_IRQ_CHIP + select PINCTRL + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + +endif + config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL @@ -87,16 +94,8 @@ config ARCH_BITMAIN help This enables support for the Bitmain SoC Family. -config ARCH_BRCMSTB - bool "Broadcom Set-Top-Box SoCs" - select ARCH_HAS_RESET_CONTROLLER - select GENERIC_IRQ_CHIP - select PINCTRL - help - This enables support for Broadcom's ARMv8 Set Top Box SoCs - config ARCH_EXYNOS - bool "ARMv8 based Samsung Exynos SoC family" + bool "Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG select CLKSRC_EXYNOS_MCT select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS @@ -109,7 +108,7 @@ config ARCH_EXYNOS This enables support for ARMv8 based Samsung Exynos SoC family. config ARCH_SPARX5 - bool "ARMv8 based Microchip Sparx5 SoC family" + bool "Microchip Sparx5 SoC family" select PINCTRL select DW_APB_TIMER_OF help @@ -136,12 +135,6 @@ config ARCH_K3 This enables support for Texas Instruments' K3 multicore SoC architecture. -config ARCH_LAYERSCAPE - bool "ARMv8 based Freescale Layerscape SoC family" - select EDAC_SUPPORT - help - This enables support for the Freescale Layerscape SoC family. - config ARCH_LG1K bool "LG Electronics LG1K SoC Family" help @@ -194,14 +187,25 @@ config ARCH_MVEBU select PINCTRL_ARMADA_CP110 select PINCTRL_AC5 help - This enables support for Marvell EBU familly, including: + This enables support for Marvell EBU family, including: - Armada 3700 SoC Family - Armada 7K SoC Family - Armada 8K SoC Family - 98DX2530 SoC Family +menuconfig ARCH_NXP + bool "NXP SoC support" + +if ARCH_NXP + +config ARCH_LAYERSCAPE + bool "Freescale Layerscape SoC family" + select EDAC_SUPPORT + help + This enables support for the Freescale Layerscape SoC family. + config ARCH_MXC - bool "ARMv8 based NXP i.MX SoC family" + bool "NXP i.MX SoC family" select ARM64_ERRATUM_843419 select ARM64_ERRATUM_845719 if COMPAT select IMX_GPCV2 @@ -214,6 +218,21 @@ config ARCH_MXC This enables support for the ARMv8 based SoCs in the NXP i.MX family. +config ARCH_S32 + bool "NXP S32 SoC Family" + help + This enables support for the NXP S32 family of processors. + +endif + +config ARCH_MA35 + bool "Nuvoton MA35 Architecture" + select GPIOLIB + select PINCTRL + select RESET_CONTROLLER + help + This enables support for the ARMv8 based Nuvoton MA35 series SoCs. + config ARCH_NPCM bool "Nuvoton NPCM Architecture" select PINCTRL @@ -225,6 +244,18 @@ config ARCH_NPCM General support for NPCM8xx BMC (Arbel). Nuvoton NPCM8xx BMC based on the Cortex A35. +config ARCH_PENSANDO + bool "AMD Pensando Platforms" + help + This enables support for the ARMv8 based AMD Pensando SoC + family to include the Elba SoC. + + AMD Pensando SoCs support a range of Distributed Services + Cards in PCIe format installed into servers. The Elba + SoC includes 16 Cortex A-72 CPU cores, 144 P4-programmable + cores for a minimal latency/jitter datapath, and network + interfaces up to 200 Gb/s. + config ARCH_QCOM bool "Qualcomm Platforms" select GPIOLIB @@ -241,9 +272,6 @@ config ARCH_REALTEK config ARCH_RENESAS bool "Renesas SoC Platforms" - select GPIOLIB - select PINCTRL - select SOC_BUS help This enables support for the ARMv8 based Renesas SoCs. @@ -257,11 +285,6 @@ config ARCH_ROCKCHIP This enables support for the ARMv8 based Rockchip chipsets, like the RK3368. -config ARCH_S32 - bool "NXP S32 SoC Family" - help - This enables support for the NXP S32 family of processors. - config ARCH_SEATTLE bool "AMD Seattle SoC Family" help @@ -274,6 +297,20 @@ config ARCH_INTEL_SOCFPGA Stratix 10 (ex. Altera), Stratix10 Software Virtual Platform, Agilex and eASIC N5X. +config ARCH_STM32 + bool "STMicroelectronics STM32 SoC Family" + select GPIOLIB + select PINCTRL + select PINCTRL_STM32MP257 + select ARM_SMC_MBOX + select ARM_SCMI_PROTOCOL + select COMMON_CLK_SCMI + help + This enables support for ARMv8 based STMicroelectronics + STM32 family, including: + - STM32MP25: + - STM32MP251, STM32MP253, STM32MP255 and STM32MP257. + config ARCH_SYNQUACER bool "Socionext SynQuacer SoC Family" select IRQ_FASTEOI_HIERARCHY_HANDLERS @@ -293,7 +330,7 @@ config ARCH_TEGRA This enables support for the NVIDIA Tegra SoC family. config ARCH_TESLA_FSD - bool "ARMv8 based Tesla platform" + bool "Tesla platform" depends on ARCH_EXYNOS help Support for ARMv8 based Tesla platforms. |