diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts | 39 |
1 files changed, 11 insertions, 28 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index d7660eab68b9..0165f3a25985 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx"; compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; @@ -24,19 +25,7 @@ compatible = "linux,extcon-usb-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbcon0>; - id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - - pcie0_refclk: pcie0-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - pcie1_refclk: pcie1-refclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; reg_otg_vbus: regulator-otg-vbus { @@ -102,30 +91,25 @@ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; }; +/* PCIe slot on X36 */ &pcie0 { reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>; clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, - <&clk IMX8MQ_CLK_PCIE1_AUX>, - <&clk IMX8MQ_CLK_PCIE1_PHY>, - <&pcie0_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; + <&pcieclk 3>, + <&pcieclk 2>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; status = "okay"; }; /* - * miniPCIe, also usable for cards with USB. Therefore configure the reset as + * miniPCIe on X28, also usable for cards with USB. Therefore configure the reset as * static gpio hog. */ &pcie1 { clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, - <&clk IMX8MQ_CLK_PCIE2_AUX>, - <&clk IMX8MQ_CLK_PCIE2_PHY>, - <&pcie1_refclk>; - clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus"; - epdev_on-supply = <®_vcc_3v3>; - hard-wired = <1>; + <&pcieclk 1>, + <&pcieclk 0>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; status = "okay"; }; @@ -171,13 +155,12 @@ hnp-disable; srp-disable; adp-disable; - /* OC not supported due to non matching active polarity */ - disable-over-current; dr_mode = "otg"; status = "okay"; }; &usb3_phy1 { + vbus-supply = <®_hub_vbus>; status = "okay"; }; |