diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq.dtsi | 311 |
1 files changed, 286 insertions, 25 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index e9f0cdd10ab6..c6dc3ba0d43b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -179,6 +179,7 @@ A53_L2: l2-cache0 { compatible = "cache"; cache-level = <2>; + cache-unified; cache-size = <0x100000>; cache-line-size = <64>; cache-sets = <1024>; @@ -224,6 +225,59 @@ }; }; + funnel { + /* + * non-configurable funnel don't show up on the AMBA + * bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-static-funnel"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ca_funnel_in_port0: endpoint { + remote-endpoint = <&etm0_out_port>; + }; + }; + + port@1 { + reg = <1>; + + ca_funnel_in_port1: endpoint { + remote-endpoint = <&etm1_out_port>; + }; + }; + + port@2 { + reg = <2>; + + ca_funnel_in_port2: endpoint { + remote-endpoint = <&etm2_out_port>; + }; + }; + + port@3 { + reg = <3>; + + ca_funnel_in_port3: endpoint { + remote-endpoint = <&etm3_out_port>; + }; + }; + }; + + out-ports { + port { + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + }; + }; + pmu { compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; @@ -329,6 +383,145 @@ nvmem-cells = <&imx8mq_uid>; nvmem-cell-names = "soc_unique_id"; + etm0: etm@28440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28440000 0x1000>; + cpu = <&A53_0>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + }; + + etm1: etm@28540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28540000 0x1000>; + cpu = <&A53_1>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; + }; + }; + }; + + etm2: etm@28640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28640000 0x1000>; + cpu = <&A53_2>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm2_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port2>; + }; + }; + }; + }; + + etm3: etm@28740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0x28740000 0x1000>; + cpu = <&A53_3>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + out-ports { + port { + etm3_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port3>; + }; + }; + }; + }; + + funnel@28c03000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x28c03000 0x1000>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hugo_funnel_in_port0: endpoint { + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + + hugo_funnel_in_port1: endpoint { + /* M4 input */ + }; + }; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + }; + }; + + etf@28c04000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c04000 0x1000>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf_in_port: endpoint { + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + }; + + out-ports { + port { + etf_out_port: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + }; + }; + + etr@28c06000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x28c06000 0x1000>; + clocks = <&clk IMX8MQ_CLK_MAIN_AXI>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + aips1: bus@30000000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; reg = <0x30000000 0x400000>; @@ -534,7 +727,7 @@ status = "disabled"; }; - sdma2: sdma@302c0000 { + sdma2: dma-controller@302c0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x302c0000 0x10000>; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; @@ -546,11 +739,13 @@ }; lcdif: lcd-controller@30320000 { - compatible = "fsl,imx8mq-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx8mq-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30320000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>; - clock-names = "pix"; + clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>, + <&clk IMX8MQ_CLK_DISP_APB_ROOT>, + <&clk IMX8MQ_CLK_DISP_AXI_ROOT>; + clock-names = "pix", "axi", "disp_axi"; assigned-clocks = <&clk IMX8MQ_VIDEO_PLL1_REF_SEL>, <&clk IMX8MQ_VIDEO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_LCDIF_PIXEL>, @@ -574,8 +769,7 @@ }; iomuxc_gpr: syscon@30340000 { - compatible = "fsl,imx8mq-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", - "syscon", "simple-mfd"; + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd"; reg = <0x30340000 0x10000>; mux: mux-controller { @@ -592,32 +786,46 @@ #address-cells = <1>; #size-cells = <1>; - imx8mq_uid: soc-uid@410 { + /* + * The register address below maps to the MX8M + * Fusemap Description Table entries this way. + * Assuming + * reg = <ADDR SIZE>; + * then + * Fuse Address = (ADDR * 4) + 0x400 + * Note that if SIZE is greater than 4, then + * each subsequent fuse is located at offset + * +0x10 in Fusemap Description Table (e.g. + * reg = <0x4 0x8> describes fuses 0x410 and + * 0x420). + */ + imx8mq_uid: soc-uid@4 { /* 0x410-0x420 */ reg = <0x4 0x8>; }; - cpu_speed_grade: speed-grade@10 { + cpu_speed_grade: speed-grade@10 { /* 0x440 */ reg = <0x10 4>; }; - fec_mac_address: mac-address@90 { + fec_mac_address: mac-address@90 { /* 0x640 */ reg = <0x90 6>; }; }; - anatop: syscon@30360000 { - compatible = "fsl,imx8mq-anatop", "syscon"; + anatop: clock-controller@30360000 { + compatible = "fsl,imx8mq-anatop"; reg = <0x30360000 0x10000>; interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; }; snvs: snvs@30370000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x30370000 0x10000>; - snvs_rtc: snvs-rtc-lp{ + snvs_rtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap =<&snvs>; + regmap = <&snvs>; offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -756,7 +964,7 @@ <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_VPU_PLL>; assigned-clock-rates = <600000000>, - <600000000>, + <300000000>, <800000000>, <0>; }; @@ -926,6 +1134,8 @@ clocks = <&clk IMX8MQ_CLK_UART1_ROOT>, <&clk IMX8MQ_CLK_UART1_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -937,6 +1147,8 @@ clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, <&clk IMX8MQ_CLK_UART3_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -948,6 +1160,8 @@ clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, <&clk IMX8MQ_CLK_UART2_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1034,9 +1248,11 @@ }; }; - mipi_dsi: mipi-dsi@30a00000 { + mipi_dsi: dsi@30a00000 { compatible = "fsl,imx8mq-nwl-dsi"; reg = <0x30a00000 0x300>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&clk IMX8MQ_CLK_DSI_CORE>, <&clk IMX8MQ_CLK_DSI_AHB>, <&clk IMX8MQ_CLK_DSI_IPG_DIV>, @@ -1143,6 +1359,8 @@ clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, <&clk IMX8MQ_CLK_UART4_ROOT>; clock-names = "ipg", "per"; + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -1184,7 +1402,7 @@ }; csi1: csi@30a90000 { - compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + compatible = "fsl,imx8mq-csi"; reg = <0x30a90000 0x10000>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_CSI1_ROOT>; @@ -1236,7 +1454,7 @@ }; csi2: csi@30b80000 { - compatible = "fsl,imx8mq-csi", "fsl,imx7-csi"; + compatible = "fsl,imx8mq-csi"; reg = <0x30b80000 0x10000>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_CSI2_ROOT>; @@ -1302,7 +1520,7 @@ status = "disabled"; }; - sdma1: sdma@30bd0000 { + sdma1: dma-controller@30bd0000 { compatible = "fsl,imx8mq-sdma","fsl,imx7d-sdma"; reg = <0x30bd0000 0x10000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -1356,15 +1574,15 @@ noc_opp_table: opp-table { compatible = "operating-points-v2"; - opp-133M { + opp-133000000 { opp-hz = /bits/ 64 <133333333>; }; - opp-400M { + opp-400000000 { opp-hz = /bits/ 64 <400000000>; }; - opp-800M { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; }; }; @@ -1431,7 +1649,7 @@ phys = <&usb3_phy0>, <&usb3_phy0>; phy-names = "usb2-phy", "usb3-phy"; power-domains = <&pgc_otg1>; - usb3-resume-missing-cas; + snps,parkmode-disable-ss-quirk; status = "disabled"; }; @@ -1463,7 +1681,7 @@ phys = <&usb3_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; power-domains = <&pgc_otg2>; - usb3-resume-missing-cas; + snps,parkmode-disable-ss-quirk; status = "disabled"; }; @@ -1528,6 +1746,11 @@ <0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <0>; + clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_PHY>, + <&clk IMX8MQ_CLK_PCIE1_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY>, <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>, @@ -1552,8 +1775,9 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ - <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi"; @@ -1565,6 +1789,11 @@ <0 0 0 4 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; fsl,max-link-speed = <2>; linux,pci-domain = <1>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; power-domains = <&pgc_pcie>; resets = <&src IMX8MQ_RESET_PCIEPHY2>, <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, @@ -1581,6 +1810,38 @@ status = "disabled"; }; + pcie1_ep: pcie-ep@33c00000 { + compatible = "fsl,imx8mq-pcie-ep"; + reg = <0x33c00000 0x000400000>, + <0x20000000 0x08000000>; + reg-names = "dbi", "addr_space"; + num-lanes = <1>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dma"; + fsl,max-link-speed = <2>; + clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; + power-domains = <&pgc_pcie>; + resets = <&src IMX8MQ_RESET_PCIEPHY2>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_EN>, + <&src IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; + assigned-clocks = <&clk IMX8MQ_CLK_PCIE2_CTRL>, + <&clk IMX8MQ_CLK_PCIE2_PHY>, + <&clk IMX8MQ_CLK_PCIE2_AUX>; + assigned-clock-parents = <&clk IMX8MQ_SYS2_PLL_250M>, + <&clk IMX8MQ_SYS2_PLL_100M>, + <&clk IMX8MQ_SYS1_PLL_80M>; + assigned-clock-rates = <250000000>, <100000000>, + <10000000>; + num-ib-windows = <4>; + num-ob-windows = <4>; + status = "disabled"; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, /* GIC Dist */ |