diff options
Diffstat (limited to 'arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts | 237 |
1 files changed, 237 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts new file mode 100644 index 000000000000..63fbc8352161 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-372x.dtsi" + +/ { + model = "GL.iNet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + switch { + label = "switch"; + linux,code = <BTN_0>; + gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + vpn { + label = "green:vpn"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + read-only; + }; + + partition@100000 { + label = "dtb"; + reg = <0x100000 0x10000>; + read-only; + }; + + partition@110000 { + label = "rescue"; + reg = <0x110000 0x1000000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: ethernet-switch@1 { + compatible = "marvell,mv88e6085"; + reg = <1>; + + dsa,member = <0 0>; + + ports: ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + ethernet-port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + + nvmem-cells = <&macaddr_factory_6>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: ethernet-phy@11 { + reg = <0x11>; + }; + switch0phy1: ethernet-phy@12 { + reg = <0x12>; + }; + switch0phy2: ethernet-phy@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + nvmem-cells = <&macaddr_factory_0>; + nvmem-cell-names = "mac-address"; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_factory_6: macaddr@6 { + reg = <0x6 0x6>; + }; +}; |