diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts | 569 |
1 files changed, 569 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts new file mode 100644 index 000000000000..aa6c39482a2f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/apq8016-lpass.h> + +/ { + model = "Samsung Galaxy A7 (2015)"; + compatible = "samsung,a7", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + /* Additional memory used by Samsung firmware modifications */ + tz-apps@85500000 { + reg = <0x0 0x85500000 0x0 0xb00000>; + no-map; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-home { + label = "Home"; + gpios = <&tlmm 109 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + i2c-fg { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&fg_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + battery@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_EDGE_BOTH>; + + pinctrl-0 = <&fg_alert_default>; + pinctrl-names = "default"; + }; + }; + + i2c-nfc { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&nfc_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + nfc@2b { + compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; + reg = <0x2b>; + + interrupt-parent = <&tlmm>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_default>; + pinctrl-names = "default"; + }; + }; + + i2c-sensor { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&sensor_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + accelerometer: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&tlmm>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "-1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + }; + }; + + i2c-tkey { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&tkey_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + touchkey@20 { + /* Note: Actually an ABOV MCU that implements same interface */ + compatible = "coreriver,tc360-touchkey"; + reg = <0x20>; + + interrupt-parent = <&tlmm>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <®_touch_key>; + vdd-supply = <®_keyled>; + vddio-supply = <&pm8916_l6>; + + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-0 = <&tkey_default>; + pinctrl-names = "default"; + }; + }; + + pwm_vibrator: pwm-vibrator { + compatible = "clk-pwm"; + #pwm-cells = <2>; + + clocks = <&gcc GCC_GP2_CLK>; + + pinctrl-0 = <&motor_pwm_default>; + pinctrl-names = "default"; + }; + + reg_keyled: regulator-keyled { + compatible = "regulator-fixed"; + regulator-name = "keyled"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */ + gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tkey_led_en_default>; + pinctrl-names = "default"; + }; + + reg_touch_key: regulator-touch-key { + compatible = "regulator-fixed"; + regulator-name = "touch_key"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tkey_en_default>; + pinctrl-names = "default"; + }; + + reg_tsp_vdd: regulator-tsp-vdd { + compatible = "regulator-fixed"; + regulator-name = "tsp_vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pm8916_s4>; + + gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tsp_io_en_default>; + pinctrl-names = "default"; + }; + + reg_vdd_tsp: regulator-vdd-tsp { + compatible = "regulator-fixed"; + regulator-name = "vdd_tsp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <®_tsp_en_default>; + pinctrl-names = "default"; + }; + + reg_vibrator: regulator-vibrator { + compatible = "regulator-fixed"; + regulator-name = "motor_en"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + vibrator { + compatible = "pwm-vibrator"; + + pwms = <&pwm_vibrator 0 100000>; + pwm-names = "enable"; + + vcc-supply = <®_vibrator>; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + muic: extcon@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupt-parent = <&tlmm>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&muic_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@24 { + compatible = "cypress,tt21000"; + + reg = <0x24>; + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_vdd_tsp>; + vddio-supply = <®_tsp_vdd>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5800000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fg_alert_default: fg-alert-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + fg_i2c_default: fg-i2c-default-state { + pins = "gpio105", "gpio106"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio109"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio86"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + motor_pwm_default: motor-pwm-default-state { + pins = "gpio50"; + function = "gcc_gp2_clk_a"; + }; + + muic_int_default: muic-int-default-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + nfc_default: nfc-default-state { + irq-pins { + pins = "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc-pins { + pins = "gpio49", "gpio116"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + nfc_i2c_default: nfc-i2c-default-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tsp_en_default: reg-tsp-en-default-state { + pins = "gpio73"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + reg_tsp_io_en_default: reg-tsp-io-en-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sensor_i2c_default: sensor-i2c-default-state { + pins = "gpio84", "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tkey_default: tkey-default-state { + pins = "gpio20"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tkey_en_default: tkey-en-default-state { + pins = "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tkey_i2c_default: tkey-i2c-default-state { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tkey_led_en_default: tkey-led-en-default-state { + pins = "gpio100"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; |