diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 18 |
1 files changed, 16 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index b1ac3a89f259..c08e69391c01 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -9,6 +9,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdhci; }; @@ -27,7 +28,7 @@ extcon_usb3: extcon-usb3 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb3_id>; }; @@ -62,7 +63,6 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; - enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; regulator-name = "vcc5v0_host"; @@ -120,6 +120,20 @@ drive-impedance-ohm = <33>; }; +&gpio0 { + /* + * The BIOS_DISABLE hog is a feedback pin for the actual status of the + * signal. This usually represents the state of a switch on the baseboard. + * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed. + */ + bios-disable-hog { + gpios = <RK_PB0 GPIO_ACTIVE_HIGH>; + gpio-hog; + input; + line-name = "bios_disable"; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; |