diff options
Diffstat (limited to 'arch/powerpc/kernel/entry_64.S')
| -rw-r--r-- | arch/powerpc/kernel/entry_64.S | 193 |
1 files changed, 125 insertions, 68 deletions
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index bfbad08a1207..49d8422767b4 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -57,7 +57,7 @@ system_call_common: #ifdef CONFIG_PPC_TRANSACTIONAL_MEM BEGIN_FTR_SECTION extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */ - bne tabort_syscall + bne .Ltabort_syscall END_FTR_SECTION_IFSET(CPU_FTR_TM) #endif andi. r10,r12,MSR_PR @@ -143,6 +143,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) mtmsrd r11,1 #endif /* CONFIG_PPC_BOOK3E */ +system_call: /* label this so stack traces look sane */ /* We do need to set SOFTE in the stack frame or the return * from interrupt will be painful */ @@ -152,11 +153,11 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) CURRENT_THREAD_INFO(r11, r1) ld r10,TI_FLAGS(r11) andi. r11,r10,_TIF_SYSCALL_DOTRACE - bne syscall_dotrace /* does not return */ + bne .Lsyscall_dotrace /* does not return */ cmpldi 0,r0,NR_syscalls - bge- syscall_enosys + bge- .Lsyscall_enosys -system_call: /* label this so stack traces look sane */ +.Lsyscall: /* * Need to vector to 32 Bit or default sys_call_table here, * based on caller's run-mode / personality. @@ -185,8 +186,20 @@ system_call: /* label this so stack traces look sane */ #ifdef CONFIG_PPC_BOOK3S /* No MSR:RI on BookE */ andi. r10,r8,MSR_RI - beq- unrecov_restore + beq- .Lunrecov_restore #endif + +/* + * This is a few instructions into the actual syscall exit path (which actually + * starts at .Lsyscall_exit) to cater to kprobe blacklisting and to reduce the + * number of visible symbols for profiling purposes. + * + * We can probe from system_call until this point as MSR_RI is set. But once it + * is cleared below, we won't be able to take a trap. + * + * This is blacklisted from kprobes further below with _ASM_NOKPROBE_SYMBOL(). + */ +system_call_exit: /* * Disable interrupts so current_thread_info()->flags can't change, * and so that we don't get interrupted after loading SRR0/1. @@ -208,31 +221,21 @@ system_call: /* label this so stack traces look sane */ ld r9,TI_FLAGS(r12) li r11,-MAX_ERRNO andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK) - bne- syscall_exit_work + bne- .Lsyscall_exit_work - andi. r0,r8,MSR_FP - beq 2f + /* If MSR_FP and MSR_VEC are set in user msr, then no need to restore */ + li r7,MSR_FP #ifdef CONFIG_ALTIVEC - andis. r0,r8,MSR_VEC@h - bne 3f -#endif -2: addi r3,r1,STACK_FRAME_OVERHEAD -#ifdef CONFIG_PPC_BOOK3S - li r10,MSR_RI - mtmsrd r10,1 /* Restore RI */ -#endif - bl restore_math -#ifdef CONFIG_PPC_BOOK3S - li r11,0 - mtmsrd r11,1 + oris r7,r7,MSR_VEC@h #endif - ld r8,_MSR(r1) - ld r3,RESULT(r1) - li r11,-MAX_ERRNO + and r0,r8,r7 + cmpd r0,r7 + bne .Lsyscall_restore_math +.Lsyscall_restore_math_cont: -3: cmpld r3,r11 + cmpld r3,r11 ld r5,_CCR(r1) - bge- syscall_error + bge- .Lsyscall_error .Lsyscall_error_cont: ld r7,_NIP(r1) BEGIN_FTR_SECTION @@ -258,14 +261,48 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) RFI b . /* prevent speculative execution */ -syscall_error: +.Lsyscall_error: oris r5,r5,0x1000 /* Set SO bit in CR */ neg r3,r3 std r5,_CCR(r1) b .Lsyscall_error_cont - + +.Lsyscall_restore_math: + /* + * Some initial tests from restore_math to avoid the heavyweight + * C code entry and MSR manipulations. + */ + LOAD_REG_IMMEDIATE(r0, MSR_TS_MASK) + and. r0,r0,r8 + bne 1f + + ld r7,PACACURRENT(r13) + lbz r0,THREAD+THREAD_LOAD_FP(r7) +#ifdef CONFIG_ALTIVEC + lbz r6,THREAD+THREAD_LOAD_VEC(r7) + add r0,r0,r6 +#endif + cmpdi r0,0 + beq .Lsyscall_restore_math_cont + +1: addi r3,r1,STACK_FRAME_OVERHEAD +#ifdef CONFIG_PPC_BOOK3S + li r10,MSR_RI + mtmsrd r10,1 /* Restore RI */ +#endif + bl restore_math +#ifdef CONFIG_PPC_BOOK3S + li r11,0 + mtmsrd r11,1 +#endif + /* Restore volatiles, reload MSR from updated one */ + ld r8,_MSR(r1) + ld r3,RESULT(r1) + li r11,-MAX_ERRNO + b .Lsyscall_restore_math_cont + /* Traced system call support */ -syscall_dotrace: +.Lsyscall_dotrace: bl save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD bl do_syscall_trace_enter @@ -286,23 +323,23 @@ syscall_dotrace: ld r7,GPR7(r1) ld r8,GPR8(r1) - /* Repopulate r9 and r10 for the system_call path */ + /* Repopulate r9 and r10 for the syscall path */ addi r9,r1,STACK_FRAME_OVERHEAD CURRENT_THREAD_INFO(r10, r1) ld r10,TI_FLAGS(r10) cmpldi r0,NR_syscalls - blt+ system_call + blt+ .Lsyscall /* Return code is already in r3 thanks to do_syscall_trace_enter() */ b .Lsyscall_exit -syscall_enosys: +.Lsyscall_enosys: li r3,-ENOSYS b .Lsyscall_exit -syscall_exit_work: +.Lsyscall_exit_work: #ifdef CONFIG_PPC_BOOK3S li r10,MSR_RI mtmsrd r10,1 /* Restore RI */ @@ -362,7 +399,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) b ret_from_except #ifdef CONFIG_PPC_TRANSACTIONAL_MEM -tabort_syscall: +.Ltabort_syscall: /* Firstly we need to enable TM in the kernel */ mfmsr r10 li r9, 1 @@ -388,6 +425,8 @@ tabort_syscall: rfid b . /* prevent speculative execution */ #endif +_ASM_NOKPROBE_SYMBOL(system_call_common); +_ASM_NOKPROBE_SYMBOL(system_call_exit); /* Save non-volatile GPRs, if not already saved. */ _GLOBAL(save_nvgprs) @@ -398,6 +437,7 @@ _GLOBAL(save_nvgprs) clrrdi r0,r11,1 std r0,_TRAP(r1) blr +_ASM_NOKPROBE_SYMBOL(save_nvgprs); /* @@ -488,33 +528,30 @@ _GLOBAL(_switch) std r23,_CCR(r1) std r1,KSP(r3) /* Set old stack pointer */ -#ifdef CONFIG_SMP - /* We need a sync somewhere here to make sure that if the - * previous task gets rescheduled on another CPU, it sees all - * stores it has performed on this one. + /* + * On SMP kernels, care must be taken because a task may be + * scheduled off CPUx and on to CPUy. Memory ordering must be + * considered. + * + * Cacheable stores on CPUx will be visible when the task is + * scheduled on CPUy by virtue of the core scheduler barriers + * (see "Notes on Program-Order guarantees on SMP systems." in + * kernel/sched/core.c). + * + * Uncacheable stores in the case of involuntary preemption must + * be taken care of. The smp_mb__before_spin_lock() in __schedule() + * is implemented as hwsync on powerpc, which orders MMIO too. So + * long as there is an hwsync in the context switch path, it will + * be executed on the source CPU after the task has performed + * all MMIO ops on that CPU, and on the destination CPU before the + * task performs any MMIO ops there. */ - sync -#endif /* CONFIG_SMP */ /* - * If we optimise away the clear of the reservation in system - * calls because we know the CPU tracks the address of the - * reservation, then we need to clear it here to cover the - * case that the kernel context switch path has no larx - * instructions. + * The kernel context switch path must contain a spin_lock, + * which contains larx/stcx, which will clear any reservation + * of the task being switched. */ -BEGIN_FTR_SECTION - ldarx r6,0,r1 -END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS) - -BEGIN_FTR_SECTION -/* - * A cp_abort (copy paste abort) here ensures that when context switching, a - * copy from one process can't leak into the paste of another. - */ - PPC_CP_ABORT -END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300) - #ifdef CONFIG_PPC_BOOK3S /* Cancel all explict user streams as they will have no use after context * switch and will stop the HW from creating streams itself @@ -583,6 +620,14 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT) top of the kernel stack. */ addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE + /* + * PMU interrupts in radix may come in here. They will use r1, not + * PACAKSAVE, so this stack switch will not cause a problem. They + * will store to the process stack, which may then be migrated to + * another CPU. However the rq lock release on this CPU paired with + * the rq lock acquire on the new CPU before the stack becomes + * active on the new CPU, will order those stores. + */ mr r1,r8 /* start using new stack pointer */ std r7,PACAKSAVE(r13) @@ -763,11 +808,11 @@ restore: ld r5,SOFTE(r1) lbz r6,PACASOFTIRQEN(r13) cmpwi cr0,r5,0 - beq restore_irq_off + beq .Lrestore_irq_off /* We are enabling, were we already enabled ? Yes, just return */ cmpwi cr0,r6,1 - beq cr0,do_restore + beq cr0,.Ldo_restore /* * We are about to soft-enable interrupts (we are hard disabled @@ -776,14 +821,14 @@ restore: */ lbz r0,PACAIRQHAPPENED(r13) cmpwi cr0,r0,0 - bne- restore_check_irq_replay + bne- .Lrestore_check_irq_replay /* * Get here when nothing happened while soft-disabled, just * soft-enable and move-on. We will hard-enable as a side * effect of rfi */ -restore_no_replay: +.Lrestore_no_replay: TRACE_ENABLE_INTS li r0,1 stb r0,PACASOFTIRQEN(r13); @@ -791,7 +836,7 @@ restore_no_replay: /* * Final return path. BookE is handled in a different file */ -do_restore: +.Ldo_restore: #ifdef CONFIG_PPC_BOOK3E b exception_return_book3e #else @@ -825,7 +870,7 @@ fast_exception_return: REST_8GPRS(5, r1) andi. r0,r3,MSR_RI - beq- unrecov_restore + beq- .Lunrecov_restore /* Load PPR from thread struct before we clear MSR:RI */ BEGIN_FTR_SECTION @@ -883,7 +928,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) * make sure that in this case, we also clear PACA_IRQ_HARD_DIS * or that bit can get out of sync and bad things will happen */ -restore_irq_off: +.Lrestore_irq_off: ld r3,_MSR(r1) lbz r7,PACAIRQHAPPENED(r13) andi. r0,r3,MSR_EE @@ -893,13 +938,13 @@ restore_irq_off: 1: li r0,0 stb r0,PACASOFTIRQEN(r13); TRACE_DISABLE_INTS - b do_restore + b .Ldo_restore /* * Something did happen, check if a re-emit is needed * (this also clears paca->irq_happened) */ -restore_check_irq_replay: +.Lrestore_check_irq_replay: /* XXX: We could implement a fast path here where we check * for irq_happened being just 0x01, in which case we can * clear it and return. That means that we would potentially @@ -909,7 +954,7 @@ restore_check_irq_replay: */ bl __check_irq_replay cmpwi cr0,r3,0 - beq restore_no_replay + beq .Lrestore_no_replay /* * We need to re-emit an interrupt. We do so by re-using our @@ -958,10 +1003,18 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_DOORBELL */ 1: b ret_from_except /* What else to do here ? */ -unrecov_restore: +.Lunrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl unrecoverable_exception - b unrecov_restore + b .Lunrecov_restore + +_ASM_NOKPROBE_SYMBOL(ret_from_except); +_ASM_NOKPROBE_SYMBOL(ret_from_except_lite); +_ASM_NOKPROBE_SYMBOL(resume_kernel); +_ASM_NOKPROBE_SYMBOL(fast_exc_return_irq); +_ASM_NOKPROBE_SYMBOL(restore); +_ASM_NOKPROBE_SYMBOL(fast_exception_return); + #ifdef CONFIG_PPC_RTAS /* @@ -1038,6 +1091,8 @@ _GLOBAL(enter_rtas) rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE andc r6,r0,r9 + +__enter_rtas: sync /* disable interrupts so SRR0/1 */ mtmsrd r0 /* don't get trashed */ @@ -1074,6 +1129,8 @@ rtas_return_loc: mtspr SPRN_SRR1,r4 rfid b . /* prevent speculative execution */ +_ASM_NOKPROBE_SYMBOL(__enter_rtas) +_ASM_NOKPROBE_SYMBOL(rtas_return_loc) .align 3 1: .llong rtas_restore_regs |