diff options
Diffstat (limited to 'arch/powerpc/kernel/prom.c')
-rw-r--r-- | arch/powerpc/kernel/prom.c | 126 |
1 files changed, 100 insertions, 26 deletions
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index feae8509b59c..1dc32a058156 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -30,6 +30,7 @@ #include <linux/libfdt.h> #include <linux/cpu.h> #include <linux/pgtable.h> +#include <linux/seq_buf.h> #include <asm/rtas.h> #include <asm/page.h> @@ -44,7 +45,7 @@ #include <asm/iommu.h> #include <asm/btext.h> #include <asm/sections.h> -#include <asm/machdep.h> +#include <asm/setup.h> #include <asm/pci-bridge.h> #include <asm/kexec.h> #include <asm/opal.h> @@ -54,6 +55,8 @@ #include <asm/dt_cpu_ftrs.h> #include <asm/drmem.h> #include <asm/ultravisor.h> +#include <asm/prom.h> +#include <asm/plpks.h> #include <mm/mmu_decl.h> @@ -70,6 +73,7 @@ int __initdata iommu_is_off; int __initdata iommu_force_on; unsigned long tce_alloc_start, tce_alloc_end; u64 ppc64_rma_size; +unsigned int boot_cpu_node_count __ro_after_init; #endif static phys_addr_t first_memblock_size; static int __initdata boot_cpu_count; @@ -136,7 +140,7 @@ static void __init move_device_tree(void) } /* - * ibm,pa-features is a per-cpu property that contains a string of + * ibm,pa/pi-features is a per-cpu property that contains a string of * attribute descriptors, each of which has a 2 byte header plus up * to 254 bytes worth of processor attribute bits. First header * byte specifies the number of bytes following the header. @@ -147,16 +151,21 @@ static void __init move_device_tree(void) * pa-features property is missing, or a 1/0 to indicate if the feature * is supported/not supported. Note that the bit numbers are * big-endian to match the definition in PAPR. + * Note: the 'clear' flag clears the feature if the bit is set in the + * ibm,pa/pi-features property, it does not set the feature if the + * bit is clear. */ -static struct ibm_pa_feature { +struct ibm_feature { unsigned long cpu_features; /* CPU_FTR_xxx bit */ unsigned long mmu_features; /* MMU_FTR_xxx bit */ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */ unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */ - unsigned char pabyte; /* byte number in ibm,pa-features */ + unsigned char pabyte; /* byte number in ibm,pa/pi-features */ unsigned char pabit; /* bit number (big-endian) */ - unsigned char invert; /* if 1, pa bit set => clear feature */ -} ibm_pa_features[] __initdata = { + unsigned char clear; /* if 1, pa bit set => clear feature */ +}; + +static struct ibm_feature ibm_pa_features[] __initdata = { { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU }, { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU }, { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL }, @@ -176,11 +185,23 @@ static struct ibm_pa_feature { .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP }, { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 }, + { .pabyte = 68, .pabit = 5, .cpu_features = CPU_FTR_DEXCR_NPHIE }, +}; + +/* + * ibm,pi-features property provides the support of processor specific + * options not described in ibm,pa-features. Right now use byte 0, bit 3 + * which indicates the occurrence of DSI interrupt when the paste operation + * on the suspended NX window. + */ +static struct ibm_feature ibm_pi_features[] __initdata = { + { .pabyte = 0, .pabit = 3, .mmu_features = MMU_FTR_NX_DSI }, + { .pabyte = 0, .pabit = 4, .cpu_features = CPU_FTR_DBELL, .clear = 1 }, }; static void __init scan_features(unsigned long node, const unsigned char *ftrs, unsigned long tablelen, - struct ibm_pa_feature *fp, + struct ibm_feature *fp, unsigned long ft_size) { unsigned long i, len, bit; @@ -203,12 +224,12 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs, if (fp->pabyte >= ftrs[0]) continue; bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1; - if (bit ^ fp->invert) { + if (bit && !fp->clear) { cur_cpu_spec->cpu_features |= fp->cpu_features; cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs; cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2; cur_cpu_spec->mmu_features |= fp->mmu_features; - } else { + } else if (bit == fp->clear) { cur_cpu_spec->cpu_features &= ~fp->cpu_features; cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs; cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2; @@ -217,17 +238,18 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs, } } -static void __init check_cpu_pa_features(unsigned long node) +static void __init check_cpu_features(unsigned long node, char *name, + struct ibm_feature *fp, + unsigned long size) { const unsigned char *pa_ftrs; int tablelen; - pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); + pa_ftrs = of_get_flat_dt_prop(node, name, &tablelen); if (pa_ftrs == NULL) return; - scan_features(node, pa_ftrs, tablelen, - ibm_pa_features, ARRAY_SIZE(ibm_pa_features)); + scan_features(node, pa_ftrs, tablelen, fp, size); } #ifdef CONFIG_PPC_64S_HASH_MMU @@ -320,6 +342,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, if (type == NULL || strcmp(type, "cpu") != 0) return 0; + if (IS_ENABLED(CONFIG_PPC64)) + boot_cpu_node_count++; + /* Get physical cpuid */ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len); if (!intserv) @@ -347,12 +372,30 @@ static int __init early_init_dt_scan_cpus(unsigned long node, if (found < 0) return 0; - DBG("boot cpu: logical %d physical %d\n", found, - be32_to_cpu(intserv[found_thread])); boot_cpuid = found; - // Pass the boot CPU's hard CPU id back to our caller - *((u32 *)data) = be32_to_cpu(intserv[found_thread]); + if (IS_ENABLED(CONFIG_PPC64)) + boot_cpu_hwid = be32_to_cpu(intserv[found_thread]); + + if (nr_cpu_ids % nthreads != 0) { + set_nr_cpu_ids(ALIGN(nr_cpu_ids, nthreads)); + pr_warn("nr_cpu_ids was not a multiple of threads_per_core, adjusted to %d\n", + nr_cpu_ids); + } + + if (boot_cpuid >= nr_cpu_ids) { + // Remember boot core for smp_setup_cpu_maps() + boot_core_hwid = be32_to_cpu(intserv[0]); + + pr_warn("Boot CPU %d (core hwid %d) >= nr_cpu_ids, adjusted boot CPU to %d\n", + boot_cpuid, boot_core_hwid, found_thread); + + // Adjust boot CPU to appear on logical core 0 + boot_cpuid = found_thread; + } + + DBG("boot cpu: logical %d physical %d\n", boot_cpuid, + be32_to_cpu(intserv[found_thread])); /* * PAPR defines "logical" PVR values for cpus that @@ -375,11 +418,16 @@ static int __init early_init_dt_scan_cpus(unsigned long node, */ if (!dt_cpu_ftrs_in_use()) { prop = of_get_flat_dt_prop(node, "cpu-version", NULL); - if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) + if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) { identify_cpu(0, be32_to_cpup(prop)); + seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop)); + } check_cpu_feature_properties(node); - check_cpu_pa_features(node); + check_cpu_features(node, "ibm,pa-features", ibm_pa_features, + ARRAY_SIZE(ibm_pa_features)); + check_cpu_features(node, "ibm,pi-features", ibm_pi_features, + ARRAY_SIZE(ibm_pi_features)); } identical_pvr_fixup(node); @@ -695,6 +743,23 @@ static void __init tm_init(void) static void tm_init(void) { } #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ +static int __init +early_init_dt_scan_model(unsigned long node, const char *uname, + int depth, void *data) +{ + const char *prop; + + if (depth != 0) + return 0; + + prop = of_get_flat_dt_prop(node, "model", NULL); + if (prop) + seq_buf_printf(&ppc_hw_desc, "%s ", prop); + + /* break now */ + return 1; +} + #ifdef CONFIG_PPC64 static void __init save_fscr_to_task(void) { @@ -714,7 +779,6 @@ static inline void save_fscr_to_task(void) {} void __init early_init_devtree(void *params) { - u32 boot_cpu_hwid; phys_addr_t limit; DBG(" -> early_init_devtree(%px)\n", params); @@ -723,6 +787,8 @@ void __init early_init_devtree(void *params) if (!early_init_dt_verify(params)) panic("BUG: Failed verifying flat device tree, bad version?"); + of_scan_flat_dt(early_init_dt_scan_model, NULL); + #ifdef CONFIG_PPC_RTAS /* Some machines might need RTAS info for debugging, grab it now. */ of_scan_flat_dt(early_init_dt_scan_rtas, NULL); @@ -751,6 +817,13 @@ void __init early_init_devtree(void *params) early_init_dt_scan_root(); early_init_dt_scan_memory_ppc(); + /* + * As generic code authors expect to be able to use static keys + * in early_param() handlers, we initialize the static keys just + * before parsing early params (it's fine to call jump_label_init() + * more than once). + */ + jump_label_init(); parse_early_param(); /* make sure we've parsed cmdline for mem= before this */ @@ -795,10 +868,13 @@ void __init early_init_devtree(void *params) dt_cpu_ftrs_scan(); + // We can now add the CPU name & PVR to the hardware description + seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR)); + /* Retrieve CPU related informations from the flat tree * (altivec support, boot CPU ID, ...) */ - of_scan_flat_dt(early_init_dt_scan_cpus, &boot_cpu_hwid); + of_scan_flat_dt(early_init_dt_scan_cpus, NULL); if (boot_cpuid < 0) { printk("Failed to identify boot CPU !\n"); BUG(); @@ -815,11 +891,6 @@ void __init early_init_devtree(void *params) mmu_early_init_devtree(); - // NB. paca is not installed until later in early_setup() - allocate_paca_ptrs(); - allocate_paca(boot_cpuid); - set_hard_smp_processor_id(boot_cpuid, boot_cpu_hwid); - #ifdef CONFIG_PPC_POWERNV /* Scan and build the list of machine check recoverable ranges */ of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL); @@ -840,6 +911,9 @@ void __init early_init_devtree(void *params) powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE; #endif + /* If kexec left a PLPKS password in the DT, get it and clear it */ + plpks_early_init_devtree(); + tm_init(); DBG(" <- early_init_devtree()\n"); |