diff options
Diffstat (limited to 'arch/x86/kernel/apic/probe_32.c')
| -rw-r--r-- | arch/x86/kernel/apic/probe_32.c | 129 |
1 files changed, 30 insertions, 99 deletions
diff --git a/arch/x86/kernel/apic/probe_32.c b/arch/x86/kernel/apic/probe_32.c index a61f642b1b90..f75ee345c02d 100644 --- a/arch/x86/kernel/apic/probe_32.c +++ b/arch/x86/kernel/apic/probe_32.c @@ -10,49 +10,22 @@ #include <linux/errno.h> #include <linux/smp.h> +#include <xen/xen.h> + #include <asm/io_apic.h> #include <asm/apic.h> #include <asm/acpi.h> #include "local.h" -static int default_x86_32_early_logical_apicid(int cpu) -{ - return 1 << cpu; -} - -static void setup_apic_flat_routing(void) -{ -#ifdef CONFIG_X86_IO_APIC - printk(KERN_INFO - "Enabling APIC mode: Flat. Using %d I/O APICs\n", - nr_ioapics); -#endif -} - -static int default_apic_id_registered(void) -{ - return physid_isset(read_apic_id(), phys_cpu_present_map); -} - -/* - * Set up the logical destination ID. Intel recommends to set DFR, LDR and - * TPR before enabling an APIC. See e.g. "AP-388 82489DX User's Manual" - * (Intel document number 292116). - */ -static void default_init_apic_ldr(void) +static u32 default_get_apic_id(u32 x) { - unsigned long val; + unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR)); - apic_write(APIC_DFR, APIC_DFR_VALUE); - val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; - val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id()); - apic_write(APIC_LDR, val); -} - -static int default_phys_pkg_id(int cpuid_apic, int index_msb) -{ - return cpuid_apic >> index_msb; + if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID)) + return (x >> 24) & 0xFF; + else + return (x >> 24) & 0x0F; } /* should be called last. */ @@ -65,26 +38,16 @@ static struct apic apic_default __ro_after_init = { .name = "default", .probe = probe_default, - .acpi_madt_oem_check = NULL, - .apic_id_valid = default_apic_id_valid, - .apic_id_registered = default_apic_id_registered, - .delivery_mode = APIC_DELIVERY_MODE_FIXED, .dest_mode_logical = true, .disable_esr = 0, - .check_apicid_used = default_check_apicid_used, .init_apic_ldr = default_init_apic_ldr, - .ioapic_phys_id_map = default_ioapic_phys_id_map, - .setup_apic_routing = setup_apic_flat_routing, .cpu_present_to_apicid = default_cpu_present_to_apicid, - .apicid_to_cpu_present = physid_set_mask_of_physid, - .check_phys_apicid_present = default_check_phys_apicid_present, - .phys_pkg_id = default_phys_pkg_id, + .max_apic_id = 0xFE, .get_apic_id = default_get_apic_id, - .set_apic_id = NULL, .calc_dest_apicid = apic_flat_calc_apicid, @@ -95,17 +58,13 @@ static struct apic apic_default __ro_after_init = { .send_IPI_all = default_send_IPI_all, .send_IPI_self = default_send_IPI_self, - .inquire_remote_apic = default_inquire_remote_apic, - .read = native_apic_mem_read, .write = native_apic_mem_write, - .eoi_write = native_apic_mem_write, + .eoi = native_apic_mem_eoi, .icr_read = native_apic_icr_read, .icr_write = native_apic_icr_write, - .wait_icr_idle = native_apic_wait_icr_idle, - .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, - - .x86_32_early_logical_apicid = default_x86_32_early_logical_apicid, + .wait_icr_idle = apic_mem_wait_icr_idle, + .safe_wait_icr_idle = apic_mem_wait_icr_idle_timeout, }; apic_driver(apic_default); @@ -123,7 +82,7 @@ static int __init parse_apic(char *arg) for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) { if (!strcmp((*drv)->name, arg)) { - apic = *drv; + apic_install_driver(*drv); cmdline_apic = 1; return 0; } @@ -134,49 +93,43 @@ static int __init parse_apic(char *arg) } early_param("apic", parse_apic); -void __init default_setup_apic_routing(void) +void __init x86_32_probe_bigsmp_early(void) { - int version = boot_cpu_apic_version; + if (nr_cpu_ids <= 8 || xen_pv_domain()) + return; - if (num_possible_cpus() > 8) { + if (IS_ENABLED(CONFIG_X86_BIGSMP)) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_INTEL: - if (!APIC_XAPIC(version)) { - def_to_bigsmp = 0; + if (!APIC_XAPIC(boot_cpu_apic_version)) break; - } /* P4 and above */ fallthrough; case X86_VENDOR_HYGON: case X86_VENDOR_AMD: - def_to_bigsmp = 1; + if (apic_bigsmp_possible(cmdline_apic)) + return; + break; } } + pr_info("Limiting to 8 possible CPUs\n"); + set_nr_cpu_ids(8); +} -#ifdef CONFIG_X86_BIGSMP - /* - * This is used to switch to bigsmp mode when - * - There is no apic= option specified by the user - * - generic_apic_probe() has chosen apic_default as the sub_arch - * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support - */ - - if (!cmdline_apic && apic == &apic_default) - generic_bigsmp_probe(); -#endif - - if (apic->setup_apic_routing) - apic->setup_apic_routing(); +void __init x86_32_install_bigsmp(void) +{ + if (nr_cpu_ids > 8 && !xen_pv_domain()) + apic_bigsmp_force(); } -void __init generic_apic_probe(void) +void __init x86_32_probe_apic(void) { if (!cmdline_apic) { struct apic **drv; for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) { if ((*drv)->probe()) { - apic = *drv; + apic_install_driver(*drv); break; } } @@ -184,26 +137,4 @@ void __init generic_apic_probe(void) if (drv == __apicdrivers_end) panic("Didn't find an APIC driver"); } - printk(KERN_INFO "Using APIC driver %s\n", apic->name); -} - -/* This function can switch the APIC even after the initial ->probe() */ -int __init default_acpi_madt_oem_check(char *oem_id, char *oem_table_id) -{ - struct apic **drv; - - for (drv = __apicdrivers; drv < __apicdrivers_end; drv++) { - if (!(*drv)->acpi_madt_oem_check) - continue; - if (!(*drv)->acpi_madt_oem_check(oem_id, oem_table_id)) - continue; - - if (!cmdline_apic) { - apic = *drv; - printk(KERN_INFO "Switched to APIC driver `%s'.\n", - apic->name); - } - return 1; - } - return 0; } |