diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 450 |
1 files changed, 341 insertions, 109 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 66453546e24f..819de0f11012 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -121,8 +121,8 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_2_soc = { }, }, .num_states = 1, - .sr_exit_time_us = 20.16, - .sr_enter_plus_exit_time_us = 27.13, + .sr_exit_time_us = 42.97, + .sr_enter_plus_exit_time_us = 49.94, .sr_exit_z8_time_us = 285.0, .sr_enter_plus_exit_z8_time_us = 320, .writeback_latency_us = 12.0, @@ -243,18 +243,61 @@ void dcn32_build_wm_range_table_fpu(struct clk_mgr_internal *clk_mgr) clk_mgr->base.bw_params->wm_table.nv_entries[WM_D].pmfw_breakdown.max_uclk = 0xFFFF; } +/* + * Finds dummy_latency_index when MCLK switching using firmware based + * vblank stretch is enabled. This function will iterate through the + * table of dummy pstate latencies until the lowest value that allows + * dm_allow_self_refresh_and_mclk_switch to happen is found + */ +int dcn32_find_dummy_latency_index_for_fw_based_mclk_switch(struct dc *dc, + struct dc_state *context, + display_e2e_pipe_params_st *pipes, + int pipe_cnt, + int vlevel) +{ + const int max_latency_table_entries = 4; + const struct vba_vars_st *vba = &context->bw_ctx.dml.vba; + int dummy_latency_index = 0; + + dc_assert_fp_enabled(); + + while (dummy_latency_index < max_latency_table_entries) { + context->bw_ctx.dml.soc.dram_clock_change_latency_us = + dc->clk_mgr->bw_params->dummy_pstate_table[dummy_latency_index].dummy_pstate_latency_us; + dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, false); + + if (vlevel < context->bw_ctx.dml.vba.soc.num_states && + vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] != dm_dram_clock_change_unsupported) + break; + + dummy_latency_index++; + } + + if (dummy_latency_index == max_latency_table_entries) { + ASSERT(dummy_latency_index != max_latency_table_entries); + /* If the execution gets here, it means dummy p_states are + * not possible. This should never happen and would mean + * something is severely wrong. + * Here we reset dummy_latency_index to 3, because it is + * better to have underflows than system crashes. + */ + dummy_latency_index = max_latency_table_entries - 1; + } + + return dummy_latency_index; +} + /** * dcn32_helper_populate_phantom_dlg_params - Get DLG params for phantom pipes * and populate pipe_ctx with those params. - * - * This function must be called AFTER the phantom pipes are added to context - * and run through DML (so that the DLG params for the phantom pipes can be - * populated), and BEFORE we program the timing for the phantom pipes. - * * @dc: [in] current dc state * @context: [in] new dc state * @pipes: [in] DML pipe params array * @pipe_cnt: [in] DML pipe count + * + * This function must be called AFTER the phantom pipes are added to context + * and run through DML (so that the DLG params for the phantom pipes can be + * populated), and BEFORE we program the timing for the phantom pipes. */ void dcn32_helper_populate_phantom_dlg_params(struct dc *dc, struct dc_state *context, @@ -286,41 +329,88 @@ void dcn32_helper_populate_phantom_dlg_params(struct dc *dc, } } -bool dcn32_predict_pipe_split(struct dc_state *context, display_pipe_params_st pipe, int index) +/** + * dcn32_predict_pipe_split - Predict if pipe split will occur for a given DML pipe + * @context: [in] New DC state to be programmed + * @pipe_e2e: [in] DML pipe end to end context + * + * This function takes in a DML pipe (pipe_e2e) and predicts if pipe split is required (both + * ODM and MPC). For pipe split, ODM combine is determined by the ODM mode, and MPC combine is + * determined by DPPClk requirements + * + * This function follows the same policy as DML: + * - Check for ODM combine requirements / policy first + * - MPC combine is only chosen if there is no ODM combine requirements / policy in place, and + * MPC is required + * + * Return: Number of splits expected (1 for 2:1 split, 3 for 4:1 split, 0 for no splits). + */ +uint8_t dcn32_predict_pipe_split(struct dc_state *context, + display_e2e_pipe_params_st *pipe_e2e) { double pscl_throughput; double pscl_throughput_chroma; double dpp_clk_single_dpp, clock; double clk_frequency = 0.0; double vco_speed = context->bw_ctx.dml.soc.dispclk_dppclk_vco_speed_mhz; + bool total_available_pipes_support = false; + uint32_t number_of_dpp = 0; + enum odm_combine_mode odm_mode = dm_odm_combine_mode_disabled; + double req_dispclk_per_surface = 0; + uint8_t num_splits = 0; dc_assert_fp_enabled(); - dml32_CalculateSinglePipeDPPCLKAndSCLThroughput(pipe.scale_ratio_depth.hscl_ratio, - pipe.scale_ratio_depth.hscl_ratio_c, - pipe.scale_ratio_depth.vscl_ratio, - pipe.scale_ratio_depth.vscl_ratio_c, - context->bw_ctx.dml.ip.max_dchub_pscl_bw_pix_per_clk, - context->bw_ctx.dml.ip.max_pscl_lb_bw_pix_per_clk, - pipe.dest.pixel_rate_mhz, - pipe.src.source_format, - pipe.scale_taps.htaps, - pipe.scale_taps.htaps_c, - pipe.scale_taps.vtaps, - pipe.scale_taps.vtaps_c, - /* Output */ - &pscl_throughput, &pscl_throughput_chroma, - &dpp_clk_single_dpp); + dml32_CalculateODMMode(context->bw_ctx.dml.ip.maximum_pixels_per_line_per_dsc_unit, + pipe_e2e->pipe.dest.hactive, + pipe_e2e->dout.output_format, + pipe_e2e->dout.output_type, + pipe_e2e->pipe.dest.odm_combine_policy, + context->bw_ctx.dml.soc.clock_limits[context->bw_ctx.dml.soc.num_states - 1].dispclk_mhz, + context->bw_ctx.dml.soc.clock_limits[context->bw_ctx.dml.soc.num_states - 1].dispclk_mhz, + pipe_e2e->dout.dsc_enable != 0, + 0, /* TotalNumberOfActiveDPP can be 0 since we're predicting pipe split requirement */ + context->bw_ctx.dml.ip.max_num_dpp, + pipe_e2e->pipe.dest.pixel_rate_mhz, + context->bw_ctx.dml.soc.dcn_downspread_percent, + context->bw_ctx.dml.ip.dispclk_ramp_margin_percent, + context->bw_ctx.dml.soc.dispclk_dppclk_vco_speed_mhz, + pipe_e2e->dout.dsc_slices, + /* Output */ + &total_available_pipes_support, + &number_of_dpp, + &odm_mode, + &req_dispclk_per_surface); + + dml32_CalculateSinglePipeDPPCLKAndSCLThroughput(pipe_e2e->pipe.scale_ratio_depth.hscl_ratio, + pipe_e2e->pipe.scale_ratio_depth.hscl_ratio_c, + pipe_e2e->pipe.scale_ratio_depth.vscl_ratio, + pipe_e2e->pipe.scale_ratio_depth.vscl_ratio_c, + context->bw_ctx.dml.ip.max_dchub_pscl_bw_pix_per_clk, + context->bw_ctx.dml.ip.max_pscl_lb_bw_pix_per_clk, + pipe_e2e->pipe.dest.pixel_rate_mhz, + pipe_e2e->pipe.src.source_format, + pipe_e2e->pipe.scale_taps.htaps, + pipe_e2e->pipe.scale_taps.htaps_c, + pipe_e2e->pipe.scale_taps.vtaps, + pipe_e2e->pipe.scale_taps.vtaps_c, + /* Output */ + &pscl_throughput, &pscl_throughput_chroma, + &dpp_clk_single_dpp); clock = dpp_clk_single_dpp * (1 + context->bw_ctx.dml.soc.dcn_downspread_percent / 100); if (clock > 0) - clk_frequency = vco_speed * 4.0 / ((int)(vco_speed * 4.0)); + clk_frequency = vco_speed * 4.0 / ((int)(vco_speed * 4.0) / clock); - if (clk_frequency > context->bw_ctx.dml.soc.clock_limits[index].dppclk_mhz) - return true; - else - return false; + if (odm_mode == dm_odm_combine_mode_2to1) + num_splits = 1; + else if (odm_mode == dm_odm_combine_mode_4to1) + num_splits = 3; + else if (clk_frequency > context->bw_ctx.dml.soc.clock_limits[context->bw_ctx.dml.soc.num_states - 1].dppclk_mhz) + num_splits = 1; + + return num_splits; } static float calculate_net_bw_in_kbytes_sec(struct _vcs_dpi_voltage_scaling_st *entry) @@ -409,7 +499,14 @@ void insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *table, } /** - * dcn32_set_phantom_stream_timing: Set timing params for the phantom stream + * dcn32_set_phantom_stream_timing - Set timing params for the phantom stream + * @dc: current dc state + * @context: new dc state + * @ref_pipe: Main pipe for the phantom stream + * @phantom_stream: target phantom stream state + * @pipes: DML pipe params + * @pipe_cnt: number of DML pipes + * @dc_pipe_idx: DC pipe index for the main pipe (i.e. ref_pipe) * * Set timing params of the phantom stream based on calculated output from DML. * This function first gets the DML pipe index using the DC pipe index, then @@ -422,13 +519,6 @@ void insert_entry_into_table_sorted(struct _vcs_dpi_voltage_scaling_st *table, * that separately. * * - Set phantom backporch = vstartup of main pipe - * - * @dc: current dc state - * @context: new dc state - * @ref_pipe: Main pipe for the phantom stream - * @pipes: DML pipe params - * @pipe_cnt: number of DML pipes - * @dc_pipe_idx: DC pipe index for the main pipe (i.e. ref_pipe) */ void dcn32_set_phantom_stream_timing(struct dc *dc, struct dc_state *context, @@ -473,8 +563,11 @@ void dcn32_set_phantom_stream_timing(struct dc *dc, // DML calculation for MALL region doesn't take into account FW delay // and required pstate allow width for multi-display cases + /* Add 16 lines margin to the MALL REGION because SUB_VP_START_LINE must be aligned + * to 2 swaths (i.e. 16 lines) + */ phantom_vactive = get_subviewport_lines_needed_in_mall(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx) + - pstate_width_fw_delay_lines; + pstate_width_fw_delay_lines + dc->caps.subvp_swath_height_margin_lines; // For backporch of phantom pipe, use vstartup of the main pipe phantom_bp = get_vstartup(&context->bw_ctx.dml, pipes, pipe_cnt, pipe_idx); @@ -490,19 +583,18 @@ void dcn32_set_phantom_stream_timing(struct dc *dc, phantom_stream->timing.v_front_porch + phantom_stream->timing.v_sync_width + phantom_bp; + phantom_stream->timing.flags.DSC = 0; // Don't need DSC for phantom timing } /** - * dcn32_get_num_free_pipes: Calculate number of free pipes + * dcn32_get_num_free_pipes - Calculate number of free pipes + * @dc: current dc state + * @context: new dc state * * This function assumes that a "used" pipe is a pipe that has * both a stream and a plane assigned to it. * - * @dc: current dc state - * @context: new dc state - * - * Return: - * Number of free pipes available in the context + * Return: Number of free pipes available in the context */ static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *context) { @@ -526,7 +618,10 @@ static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *con } /** - * dcn32_assign_subvp_pipe: Function to decide which pipe will use Sub-VP. + * dcn32_assign_subvp_pipe - Function to decide which pipe will use Sub-VP. + * @dc: current dc state + * @context: new dc state + * @index: [out] dc pipe index for the pipe chosen to have phantom pipes assigned * * We enter this function if we are Sub-VP capable (i.e. enough pipes available) * and regular P-State switching (i.e. VACTIVE/VBLANK) is not supported, or if @@ -540,12 +635,7 @@ static unsigned int dcn32_get_num_free_pipes(struct dc *dc, struct dc_state *con * for determining which should be the SubVP pipe (need a way to determine if a pipe / plane doesn't * support MCLK switching naturally [i.e. ACTIVE or VBLANK]). * - * @param dc: current dc state - * @param context: new dc state - * @param index: [out] dc pipe index for the pipe chosen to have phantom pipes assigned - * - * Return: - * True if a valid pipe assignment was found for Sub-VP. Otherwise false. + * Return: True if a valid pipe assignment was found for Sub-VP. Otherwise false. */ static bool dcn32_assign_subvp_pipe(struct dc *dc, struct dc_state *context, @@ -556,6 +646,7 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, bool valid_assignment_found = false; unsigned int free_pipes = dcn32_get_num_free_pipes(dc, context); bool current_assignment_freesync = false; + struct vba_vars_st *vba = &context->bw_ctx.dml.vba; for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; @@ -569,8 +660,16 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, refresh_rate = (pipe->stream->timing.pix_clk_100hz * 100 + pipe->stream->timing.v_total * pipe->stream->timing.h_total - 1) / (double)(pipe->stream->timing.v_total * pipe->stream->timing.h_total); + /* SubVP pipe candidate requirements: + * - Refresh rate < 120hz + * - Not able to switch in vactive naturally (switching in active means the + * DET provides enough buffer to hide the P-State switch latency -- trying + * to combine this with SubVP can cause issues with the scheduling). + * - Not TMZ surface + */ if (pipe->plane_state && !pipe->top_pipe && - pipe->stream->mall_stream_config.type == SUBVP_NONE && refresh_rate < 120) { + pipe->stream->mall_stream_config.type == SUBVP_NONE && refresh_rate < 120 && !pipe->plane_state->address.tmz_surface && + vba->ActiveDRAMClockChangeLatencyMarginPerState[vba->VoltageLevel][vba->maxMpcComb][vba->pipe_plane[pipe_idx]] <= 0) { while (pipe) { num_pipes++; pipe = pipe->bottom_pipe; @@ -603,7 +702,9 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, } /** - * dcn32_enough_pipes_for_subvp: Function to check if there are "enough" pipes for SubVP. + * dcn32_enough_pipes_for_subvp - Function to check if there are "enough" pipes for SubVP. + * @dc: current dc state + * @context: new dc state * * This function returns true if there are enough free pipes * to create the required phantom pipes for any given stream @@ -615,9 +716,6 @@ static bool dcn32_assign_subvp_pipe(struct dc *dc, * pipe which can be used as the phantom pipe for the non pipe * split pipe. * - * @dc: current dc state - * @context: new dc state - * * Return: * True if there are enough free pipes to assign phantom pipes to at least one * stream that does not already have phantom pipes assigned. Otherwise false. @@ -656,7 +754,9 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context } /** - * subvp_subvp_schedulable: Determine if SubVP + SubVP config is schedulable + * subvp_subvp_schedulable - Determine if SubVP + SubVP config is schedulable + * @dc: current dc state + * @context: new dc state * * High level algorithm: * 1. Find longest microschedule length (in us) between the two SubVP pipes @@ -664,11 +764,7 @@ static bool dcn32_enough_pipes_for_subvp(struct dc *dc, struct dc_state *context * pipes still allows for the maximum microschedule to fit in the active * region for both pipes. * - * @dc: current dc state - * @context: new dc state - * - * Return: - * bool - True if the SubVP + SubVP config is schedulable, false otherwise + * Return: True if the SubVP + SubVP config is schedulable, false otherwise */ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context) { @@ -728,7 +824,10 @@ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context) } /** - * subvp_drr_schedulable: Determine if SubVP + DRR config is schedulable + * subvp_drr_schedulable - Determine if SubVP + DRR config is schedulable + * @dc: current dc state + * @context: new dc state + * @drr_pipe: DRR pipe_ctx for the SubVP + DRR config * * High level algorithm: * 1. Get timing for SubVP pipe, phantom pipe, and DRR pipe @@ -737,12 +836,7 @@ static bool subvp_subvp_schedulable(struct dc *dc, struct dc_state *context) * 3.If (SubVP Active - Prefetch > Stretched DRR frame + max(MALL region, Stretched DRR frame)) * then report the configuration as supported * - * @dc: current dc state - * @context: new dc state - * @drr_pipe: DRR pipe_ctx for the SubVP + DRR config - * - * Return: - * bool - True if the SubVP + DRR config is schedulable, false otherwise + * Return: True if the SubVP + DRR config is schedulable, false otherwise */ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struct pipe_ctx *drr_pipe) { @@ -806,7 +900,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struc /** - * subvp_vblank_schedulable: Determine if SubVP + VBLANK config is schedulable + * subvp_vblank_schedulable - Determine if SubVP + VBLANK config is schedulable + * @dc: current dc state + * @context: new dc state * * High level algorithm: * 1. Get timing for SubVP pipe, phantom pipe, and VBLANK pipe @@ -814,11 +910,7 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context, struc * then report the configuration as supported * 3. If the VBLANK display is DRR, then take the DRR static schedulability path * - * @dc: current dc state - * @context: new dc state - * - * Return: - * bool - True if the SubVP + VBLANK/DRR config is schedulable, false otherwise + * Return: True if the SubVP + VBLANK/DRR config is schedulable, false otherwise */ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) { @@ -895,20 +987,18 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) } /** - * subvp_validate_static_schedulability: Check which SubVP case is calculated and handle - * static analysis based on the case. + * subvp_validate_static_schedulability - Check which SubVP case is calculated + * and handle static analysis based on the case. + * @dc: current dc state + * @context: new dc state + * @vlevel: Voltage level calculated by DML * * Three cases: * 1. SubVP + SubVP * 2. SubVP + VBLANK (DRR checked internally) * 3. SubVP + VACTIVE (currently unsupported) * - * @dc: current dc state - * @context: new dc state - * @vlevel: Voltage level calculated by DML - * - * Return: - * bool - True if statically schedulable, false otherwise + * Return: True if statically schedulable, false otherwise */ static bool subvp_validate_static_schedulability(struct dc *dc, struct dc_state *context, @@ -983,13 +1073,21 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, * DML favors voltage over p-state, but we're more interested in * supporting p-state over voltage. We can't support p-state in * prefetch mode > 0 so try capping the prefetch mode to start. + * Override present for testing. */ - context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = + if (dc->debug.dml_disallow_alternate_prefetch_modes) + context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = dm_prefetch_support_uclk_fclk_and_stutter; + else + context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = + dm_prefetch_support_uclk_fclk_and_stutter_if_possible; + *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt); /* This may adjust vlevel and maxMpcComb */ - if (*vlevel < context->bw_ctx.dml.soc.num_states) + if (*vlevel < context->bw_ctx.dml.soc.num_states) { *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; + } /* Conditions for setting up phantom pipes for SubVP: * 1. Not force disable SubVP @@ -999,11 +1097,23 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, * 5. (Config doesn't support MCLK in VACTIVE/VBLANK || dc->debug.force_subvp_mclk_switch) */ if (!dc->debug.force_disable_subvp && dcn32_all_pipes_have_stream_and_plane(dc, context) && - !dcn32_mpo_in_use(context) && (*vlevel == context->bw_ctx.dml.soc.num_states || + !dcn32_mpo_in_use(context) && !dcn32_any_surfaces_rotated(dc, context) && + (*vlevel == context->bw_ctx.dml.soc.num_states || vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported || dc->debug.force_subvp_mclk_switch)) { dcn32_merge_pipes_for_subvp(dc, context); + memset(merge, 0, MAX_PIPES * sizeof(bool)); + + /* to re-initialize viewport after the pipe merge */ + for (i = 0; i < dc->res_pool->pipe_count; i++) { + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + + if (!pipe_ctx->plane_state || !pipe_ctx->stream) + continue; + + resource_build_scaling_params(pipe_ctx); + } while (!found_supported_config && dcn32_enough_pipes_for_subvp(dc, context) && dcn32_assign_subvp_pipe(dc, context, &dc_pipe_idx)) { @@ -1014,7 +1124,9 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, * will not allow for switch in VBLANK. The DRR display must have it's VBLANK stretched * enough to support MCLK switching. */ - if (*vlevel == context->bw_ctx.dml.soc.num_states) { + if (*vlevel == context->bw_ctx.dml.soc.num_states && + context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final == + dm_prefetch_support_uclk_fclk_and_stutter) { context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = dm_prefetch_support_stutter; /* There are params (such as FabricClock) that need to be recalculated @@ -1070,17 +1182,31 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, dc->res_pool->funcs->remove_phantom_pipes(dc, context); vba->DRAMClockChangeSupport[*vlevel][vba->maxMpcComb] = dm_dram_clock_change_unsupported; *pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, false); - } else { - // only call dcn20_validate_apply_pipe_split_flags if we found a supported config - memset(split, 0, MAX_PIPES * sizeof(int)); - memset(merge, 0, MAX_PIPES * sizeof(bool)); - *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + *vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, *pipe_cnt); + /* This may adjust vlevel and maxMpcComb */ + if (*vlevel < context->bw_ctx.dml.soc.num_states) { + *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; + } + } else { // Most populate phantom DLG params before programming hardware / timing for phantom pipe DC_FP_START(); dcn32_helper_populate_phantom_dlg_params(dc, context, pipes, *pipe_cnt); DC_FP_END(); + /* Call validate_apply_pipe_split flags after calling DML getters for + * phantom dlg params, or some of the VBA params indicating pipe split + * can be overwritten by the getters. + * + * When setting up SubVP config, all pipes are merged before attempting to + * add phantom pipes. If pipe split (ODM / MPC) is required, both the main + * and phantom pipes will be split in the regular pipe splitting sequence. + */ + memset(split, 0, MAX_PIPES * sizeof(int)); + memset(merge, 0, MAX_PIPES * sizeof(bool)); + *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, *vlevel, split, merge); + vba->VoltageLevel = *vlevel; // Note: We can't apply the phantom pipes to hardware at this time. We have to wait // until driver has acquired the DMCUB lock to do it safely. } @@ -1344,7 +1470,8 @@ bool dcn32_internal_validate_bw(struct dc *dc, int split[MAX_PIPES] = { 0 }; bool merge[MAX_PIPES] = { false }; bool newly_split[MAX_PIPES] = { false }; - int pipe_cnt, i, pipe_idx, vlevel; + int pipe_cnt, i, pipe_idx; + int vlevel = context->bw_ctx.dml.soc.num_states; struct vba_vars_st *vba = &context->bw_ctx.dml.vba; dc_assert_fp_enabled(); @@ -1373,17 +1500,22 @@ bool dcn32_internal_validate_bw(struct dc *dc, DC_FP_END(); } - if (fast_validate || vlevel == context->bw_ctx.dml.soc.num_states || - vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported) { + if (fast_validate || + (dc->debug.dml_disallow_alternate_prefetch_modes && + (vlevel == context->bw_ctx.dml.soc.num_states || + vba->DRAMClockChangeSupport[vlevel][vba->maxMpcComb] == dm_dram_clock_change_unsupported))) { /* - * If mode is unsupported or there's still no p-state support then - * fall back to favoring voltage. + * If dml_disallow_alternate_prefetch_modes is false, then we have already + * tried alternate prefetch modes during full validation. * - * If Prefetch mode 0 failed for this config, or passed with Max UCLK, try if - * supported with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2) + * If mode is unsupported or there is no p-state support, then + * fall back to favouring voltage. + * + * If Prefetch mode 0 failed for this config, or passed with Max UCLK, then try + * to support with Prefetch mode 1 (dm_prefetch_support_fclk_and_stutter == 2) */ context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = - dm_prefetch_support_fclk_and_stutter; + dm_prefetch_support_fclk_and_stutter; vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt); @@ -1398,6 +1530,8 @@ bool dcn32_internal_validate_bw(struct dc *dc, memset(split, 0, sizeof(split)); memset(merge, 0, sizeof(merge)); vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, vlevel, split, merge); + // dcn20_validate_apply_pipe_split_flags can modify voltage level outside of DML + vba->VoltageLevel = vlevel; } } @@ -1440,6 +1574,33 @@ bool dcn32_internal_validate_bw(struct dc *dc, if (pipe->next_odm_pipe) pipe->next_odm_pipe->prev_odm_pipe = pipe->prev_odm_pipe; + /*2:1ODM+MPC Split MPO to Single Pipe + MPC Split MPO*/ + if (pipe->bottom_pipe) { + if (pipe->bottom_pipe->prev_odm_pipe || pipe->bottom_pipe->next_odm_pipe) { + /*MPC split rules will handle this case*/ + pipe->bottom_pipe->top_pipe = NULL; + } else { + /* when merging an ODM pipes, the bottom MPC pipe must now point to + * the previous ODM pipe and its associated stream assets + */ + if (pipe->prev_odm_pipe->bottom_pipe) { + /* 3 plane MPO*/ + pipe->bottom_pipe->top_pipe = pipe->prev_odm_pipe->bottom_pipe; + pipe->prev_odm_pipe->bottom_pipe->bottom_pipe = pipe->bottom_pipe; + } else { + /* 2 plane MPO*/ + pipe->bottom_pipe->top_pipe = pipe->prev_odm_pipe; + pipe->prev_odm_pipe->bottom_pipe = pipe->bottom_pipe; + } + + memcpy(&pipe->bottom_pipe->stream_res, &pipe->bottom_pipe->top_pipe->stream_res, sizeof(struct stream_resource)); + } + } + + if (pipe->top_pipe) { + pipe->top_pipe->bottom_pipe = NULL; + } + pipe->bottom_pipe = NULL; pipe->next_odm_pipe = NULL; pipe->plane_state = NULL; @@ -1572,8 +1733,20 @@ bool dcn32_internal_validate_bw(struct dc *dc, goto validate_fail; } - if (repopulate_pipes) + if (repopulate_pipes) { pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate); + + /* repopulate_pipes = 1 means the pipes were either split or merged. In this case + * we have to re-calculate the DET allocation and run through DML once more to + * ensure all the params are calculated correctly. We do not need to run the + * pipe split check again after this call (pipes are already split / merged). + * */ + if (!fast_validate) { + context->bw_ctx.dml.soc.allow_for_pstate_or_stutter_in_vblank_final = + dm_prefetch_support_uclk_fclk_and_stutter_if_possible; + vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt); + } + } *vlevel_out = vlevel; *pipe_cnt_out = pipe_cnt; @@ -1596,6 +1769,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, int i, pipe_idx, vlevel_temp = 0; double dcfclk = dcn3_2_soc.clock_limits[0].dcfclk_mhz; double dcfclk_from_validation = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; + double dcfclk_from_fw_based_mclk_switching = dcfclk_from_validation; bool pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][context->bw_ctx.dml.vba.maxMpcComb] != dm_dram_clock_change_unsupported; unsigned int dummy_latency_index = 0; @@ -1619,7 +1793,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, dcn30_can_support_mclk_switch_using_fw_based_vblank_stretch(dc, context); if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) { - dummy_latency_index = dcn30_find_dummy_latency_index_for_fw_based_mclk_switch(dc, + dummy_latency_index = dcn32_find_dummy_latency_index_for_fw_based_mclk_switch(dc, context, pipes, pipe_cnt, vlevel); /* After calling dcn30_find_dummy_latency_index_for_fw_based_mclk_switch @@ -1631,7 +1805,7 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, dc->clk_mgr->bw_params->wm_table.nv_entries[WM_A].dml_input.pstate_latency_us; dcn32_internal_validate_bw(dc, context, pipes, &pipe_cnt, &vlevel, false); maxMpcComb = context->bw_ctx.dml.vba.maxMpcComb; - dcfclk = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; + dcfclk_from_fw_based_mclk_switching = context->bw_ctx.dml.vba.DCFCLKState[vlevel][context->bw_ctx.dml.vba.maxMpcComb]; pstate_en = context->bw_ctx.dml.vba.DRAMClockChangeSupport[vlevel][maxMpcComb] != dm_dram_clock_change_unsupported; } @@ -1717,6 +1891,10 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, pipes[0].clks_cfg.dcfclk_mhz = dcfclk_from_validation; pipes[0].clks_cfg.socclk_mhz = context->bw_ctx.dml.soc.clock_limits[vlevel].socclk_mhz; + if (context->bw_ctx.bw.dcn.clk.fw_based_mclk_switching) { + pipes[0].clks_cfg.dcfclk_mhz = dcfclk_from_fw_based_mclk_switching; + } + if (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid) { min_dram_speed_mts = context->bw_ctx.dml.vba.DRAMSpeed; min_dram_speed_mts_margin = 160; @@ -1758,7 +1936,11 @@ void dcn32_calculate_wm_and_dlg_fpu(struct dc *dc, struct dc_state *context, context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_nom = get_fraction_of_urgent_bandwidth(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.frac_urg_bw_flip = get_fraction_of_urgent_bandwidth_imm_flip(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.urgent_latency_ns = get_urgent_latency(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; - context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = get_fclk_watermark(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; + /* On DCN32/321, PMFW will set PSTATE_CHANGE_TYPE = 1 (FCLK) for UCLK dummy p-state. + * In this case we must program FCLK WM Set C to use the UCLK dummy p-state WM + * value. + */ + context->bw_ctx.bw.dcn.watermarks.c.cstate_pstate.fclk_pstate_change_ns = get_wm_dram_clock_change(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; context->bw_ctx.bw.dcn.watermarks.c.usr_retraining_ns = get_usr_retraining_watermark(&context->bw_ctx.dml, pipes, pipe_cnt) * 1000; if ((!pstate_en) && (dc->clk_mgr->bw_params->wm_table.nv_entries[WM_C].valid)) { @@ -1855,6 +2037,45 @@ static void remove_entry_from_table_at_index(struct _vcs_dpi_voltage_scaling_st memset(&table[--(*num_entries)], 0, sizeof(struct _vcs_dpi_voltage_scaling_st)); } +void dcn32_patch_dpm_table(struct clk_bw_params *bw_params) +{ + int i; + unsigned int max_dcfclk_mhz = 0, max_dispclk_mhz = 0, max_dppclk_mhz = 0, + max_phyclk_mhz = 0, max_dtbclk_mhz = 0, max_fclk_mhz = 0, max_uclk_mhz = 0; + + for (i = 0; i < MAX_NUM_DPM_LVL; i++) { + if (bw_params->clk_table.entries[i].dcfclk_mhz > max_dcfclk_mhz) + max_dcfclk_mhz = bw_params->clk_table.entries[i].dcfclk_mhz; + if (bw_params->clk_table.entries[i].fclk_mhz > max_fclk_mhz) + max_fclk_mhz = bw_params->clk_table.entries[i].fclk_mhz; + if (bw_params->clk_table.entries[i].memclk_mhz > max_uclk_mhz) + max_uclk_mhz = bw_params->clk_table.entries[i].memclk_mhz; + if (bw_params->clk_table.entries[i].dispclk_mhz > max_dispclk_mhz) + max_dispclk_mhz = bw_params->clk_table.entries[i].dispclk_mhz; + if (bw_params->clk_table.entries[i].dppclk_mhz > max_dppclk_mhz) + max_dppclk_mhz = bw_params->clk_table.entries[i].dppclk_mhz; + if (bw_params->clk_table.entries[i].phyclk_mhz > max_phyclk_mhz) + max_phyclk_mhz = bw_params->clk_table.entries[i].phyclk_mhz; + if (bw_params->clk_table.entries[i].dtbclk_mhz > max_dtbclk_mhz) + max_dtbclk_mhz = bw_params->clk_table.entries[i].dtbclk_mhz; + } + + /* Scan through clock values we currently have and if they are 0, + * then populate it with dcn3_2_soc.clock_limits[] value. + * + * Do it for DCFCLK, DISPCLK, DTBCLK and UCLK as any of those being + * 0, will cause it to skip building the clock table. + */ + if (max_dcfclk_mhz == 0) + bw_params->clk_table.entries[0].dcfclk_mhz = dcn3_2_soc.clock_limits[0].dcfclk_mhz; + if (max_dispclk_mhz == 0) + bw_params->clk_table.entries[0].dispclk_mhz = dcn3_2_soc.clock_limits[0].dispclk_mhz; + if (max_dtbclk_mhz == 0) + bw_params->clk_table.entries[0].dtbclk_mhz = dcn3_2_soc.clock_limits[0].dtbclk_mhz; + if (max_uclk_mhz == 0) + bw_params->clk_table.entries[0].memclk_mhz = dcn3_2_soc.clock_limits[0].dram_speed_mts / 16; +} + static int build_synthetic_soc_states(struct clk_bw_params *bw_params, struct _vcs_dpi_voltage_scaling_st *table, unsigned int *num_entries) { @@ -2047,7 +2268,7 @@ static int build_synthetic_soc_states(struct clk_bw_params *bw_params, return 0; } -/** +/* * dcn32_update_bw_bounding_box * * This would override some dcn3_2 ip_or_soc initial parameters hardcoded from @@ -2089,6 +2310,7 @@ void dcn32_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_pa if ((int)(dcn3_2_soc.urgent_latency_us * 1000) != dc->bb_overrides.urgent_latency_ns && dc->bb_overrides.urgent_latency_ns) { dcn3_2_soc.urgent_latency_us = dc->bb_overrides.urgent_latency_ns / 1000.0; + dcn3_2_soc.urgent_latency_pixel_data_only_us = dc->bb_overrides.urgent_latency_ns / 1000.0; } if ((int)(dcn3_2_soc.dram_clock_change_latency_us * 1000) @@ -2098,6 +2320,13 @@ void dcn32_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_pa dc->bb_overrides.dram_clock_change_latency_ns / 1000.0; } + if ((int)(dcn3_2_soc.fclk_change_latency_us * 1000) + != dc->bb_overrides.fclk_clock_change_latency_ns + && dc->bb_overrides.fclk_clock_change_latency_ns) { + dcn3_2_soc.fclk_change_latency_us = + dc->bb_overrides.fclk_clock_change_latency_ns / 1000; + } + if ((int)(dcn3_2_soc.dummy_pstate_latency_us * 1000) != dc->bb_overrides.dummy_clock_change_latency_ns && dc->bb_overrides.dummy_clock_change_latency_ns) { @@ -2111,13 +2340,16 @@ void dcn32_update_bw_bounding_box_fpu(struct dc *dc, struct clk_bw_params *bw_pa if (dc->ctx->dc_bios->funcs->get_soc_bb_info(dc->ctx->dc_bios, &bb_info) == BP_RESULT_OK) { if (bb_info.dram_clock_change_latency_100ns > 0) - dcn3_2_soc.dram_clock_change_latency_us = bb_info.dram_clock_change_latency_100ns * 10; + dcn3_2_soc.dram_clock_change_latency_us = + bb_info.dram_clock_change_latency_100ns * 10; - if (bb_info.dram_sr_enter_exit_latency_100ns > 0) - dcn3_2_soc.sr_enter_plus_exit_time_us = bb_info.dram_sr_enter_exit_latency_100ns * 10; + if (bb_info.dram_sr_enter_exit_latency_100ns > 0) + dcn3_2_soc.sr_enter_plus_exit_time_us = + bb_info.dram_sr_enter_exit_latency_100ns * 10; - if (bb_info.dram_sr_exit_latency_100ns > 0) - dcn3_2_soc.sr_exit_time_us = bb_info.dram_sr_exit_latency_100ns * 10; + if (bb_info.dram_sr_exit_latency_100ns > 0) + dcn3_2_soc.sr_exit_time_us = + bb_info.dram_sr_exit_latency_100ns * 10; } } |