diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c | 2186 |
1 files changed, 2186 insertions, 0 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c new file mode 100644 index 000000000000..138e5684c7fd --- /dev/null +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c @@ -0,0 +1,2186 @@ +/* + * Copyright 2022 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +/* FILE POLICY AND INTENDED USAGE: + * This file implements dp specific link capability retrieval sequence. It is + * responsible for retrieving, parsing, overriding, deciding capability obtained + * from dp link. Link capability consists of encoders, DPRXs, cables, retimers, + * usb and all other possible backend capabilities. Other components should + * include this header file in order to access link capability. Accessing link + * capability by dereferencing dc_link outside dp_link_capability is not a + * recommended method as it makes the component dependent on the underlying data + * structure used to represent link capability instead of function interfaces. + */ + +#include "link_dp_capability.h" +#include "link_ddc.h" +#include "link_dpcd.h" +#include "link_dp_dpia.h" +#include "link_dp_phy.h" +#include "link_edp_panel_control.h" +#include "link_dp_irq_handler.h" +#include "link/accessories/link_dp_trace.h" +#include "link_dp_training.h" +#include "atomfirmware.h" +#include "resource.h" +#include "link_enc_cfg.h" +#include "dc_dmub_srv.h" + +#define DC_LOGGER \ + link->ctx->logger +#define DC_TRACE_LEVEL_MESSAGE(...) /* do nothing */ + +#ifndef MAX +#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) +#endif +#ifndef MIN +#define MIN(X, Y) ((X) < (Y) ? (X) : (Y)) +#endif + +#define LINK_AUX_DEFAULT_TIMEOUT_PERIOD 552 /*us*/ + +struct dp_lt_fallback_entry { + enum dc_lane_count lane_count; + enum dc_link_rate link_rate; +}; + +static const struct dp_lt_fallback_entry dp_lt_fallbacks[] = { + /* This link training fallback array is ordered by + * link bandwidth from highest to lowest. + * DP specs makes it a normative policy to always + * choose the next highest link bandwidth during + * link training fallback. + */ + {LANE_COUNT_FOUR, LINK_RATE_UHBR20}, + {LANE_COUNT_FOUR, LINK_RATE_UHBR13_5}, + {LANE_COUNT_TWO, LINK_RATE_UHBR20}, + {LANE_COUNT_FOUR, LINK_RATE_UHBR10}, + {LANE_COUNT_TWO, LINK_RATE_UHBR13_5}, + {LANE_COUNT_FOUR, LINK_RATE_HIGH3}, + {LANE_COUNT_ONE, LINK_RATE_UHBR20}, + {LANE_COUNT_TWO, LINK_RATE_UHBR10}, + {LANE_COUNT_FOUR, LINK_RATE_HIGH2}, + {LANE_COUNT_ONE, LINK_RATE_UHBR13_5}, + {LANE_COUNT_TWO, LINK_RATE_HIGH3}, + {LANE_COUNT_ONE, LINK_RATE_UHBR10}, + {LANE_COUNT_TWO, LINK_RATE_HIGH2}, + {LANE_COUNT_FOUR, LINK_RATE_HIGH}, + {LANE_COUNT_ONE, LINK_RATE_HIGH3}, + {LANE_COUNT_FOUR, LINK_RATE_LOW}, + {LANE_COUNT_ONE, LINK_RATE_HIGH2}, + {LANE_COUNT_TWO, LINK_RATE_HIGH}, + {LANE_COUNT_TWO, LINK_RATE_LOW}, + {LANE_COUNT_ONE, LINK_RATE_HIGH}, + {LANE_COUNT_ONE, LINK_RATE_LOW}, +}; + +static const struct dc_link_settings fail_safe_link_settings = { + .lane_count = LANE_COUNT_ONE, + .link_rate = LINK_RATE_LOW, + .link_spread = LINK_SPREAD_DISABLED, +}; + +bool is_dp_active_dongle(const struct dc_link *link) +{ + return (link->dpcd_caps.dongle_type >= DISPLAY_DONGLE_DP_VGA_CONVERTER) && + (link->dpcd_caps.dongle_type <= DISPLAY_DONGLE_DP_HDMI_CONVERTER); +} + +bool is_dp_branch_device(const struct dc_link *link) +{ + return link->dpcd_caps.is_branch_dev; +} + +static int translate_dpcd_max_bpc(enum dpcd_downstream_port_max_bpc bpc) +{ + switch (bpc) { + case DOWN_STREAM_MAX_8BPC: + return 8; + case DOWN_STREAM_MAX_10BPC: + return 10; + case DOWN_STREAM_MAX_12BPC: + return 12; + case DOWN_STREAM_MAX_16BPC: + return 16; + default: + break; + } + + return -1; +} + +uint8_t dp_parse_lttpr_repeater_count(uint8_t lttpr_repeater_count) +{ + switch (lttpr_repeater_count) { + case 0x80: // 1 lttpr repeater + return 1; + case 0x40: // 2 lttpr repeaters + return 2; + case 0x20: // 3 lttpr repeaters + return 3; + case 0x10: // 4 lttpr repeaters + return 4; + case 0x08: // 5 lttpr repeaters + return 5; + case 0x04: // 6 lttpr repeaters + return 6; + case 0x02: // 7 lttpr repeaters + return 7; + case 0x01: // 8 lttpr repeaters + return 8; + default: + break; + } + return 0; // invalid value +} + +uint32_t dc_link_bw_kbps_from_raw_frl_link_rate_data(uint8_t bw) +{ + switch (bw) { + case 0b001: + return 9000000; + case 0b010: + return 18000000; + case 0b011: + return 24000000; + case 0b100: + return 32000000; + case 0b101: + return 40000000; + case 0b110: + return 48000000; + } + + return 0; +} + +static enum dc_link_rate linkRateInKHzToLinkRateMultiplier(uint32_t link_rate_in_khz) +{ + enum dc_link_rate link_rate; + // LinkRate is normally stored as a multiplier of 0.27 Gbps per lane. Do the translation. + switch (link_rate_in_khz) { + case 1620000: + link_rate = LINK_RATE_LOW; // Rate_1 (RBR) - 1.62 Gbps/Lane + break; + case 2160000: + link_rate = LINK_RATE_RATE_2; // Rate_2 - 2.16 Gbps/Lane + break; + case 2430000: + link_rate = LINK_RATE_RATE_3; // Rate_3 - 2.43 Gbps/Lane + break; + case 2700000: + link_rate = LINK_RATE_HIGH; // Rate_4 (HBR) - 2.70 Gbps/Lane + break; + case 3240000: + link_rate = LINK_RATE_RBR2; // Rate_5 (RBR2)- 3.24 Gbps/Lane + break; + case 4320000: + link_rate = LINK_RATE_RATE_6; // Rate_6 - 4.32 Gbps/Lane + break; + case 5400000: + link_rate = LINK_RATE_HIGH2; // Rate_7 (HBR2)- 5.40 Gbps/Lane + break; + case 8100000: + link_rate = LINK_RATE_HIGH3; // Rate_8 (HBR3)- 8.10 Gbps/Lane + break; + default: + link_rate = LINK_RATE_UNKNOWN; + break; + } + return link_rate; +} + +static union dp_cable_id intersect_cable_id( + union dp_cable_id *a, union dp_cable_id *b) +{ + union dp_cable_id out; + + out.bits.UHBR10_20_CAPABILITY = MIN(a->bits.UHBR10_20_CAPABILITY, + b->bits.UHBR10_20_CAPABILITY); + out.bits.UHBR13_5_CAPABILITY = MIN(a->bits.UHBR13_5_CAPABILITY, + b->bits.UHBR13_5_CAPABILITY); + out.bits.CABLE_TYPE = MAX(a->bits.CABLE_TYPE, b->bits.CABLE_TYPE); + + return out; +} + +/* + * Return PCON's post FRL link training supported BW if its non-zero, otherwise return max_supported_frl_bw. + */ +static uint32_t intersect_frl_link_bw_support( + const uint32_t max_supported_frl_bw_in_kbps, + const union hdmi_encoded_link_bw hdmi_encoded_link_bw) +{ + uint32_t supported_bw_in_kbps = max_supported_frl_bw_in_kbps; + + // HDMI_ENCODED_LINK_BW bits are only valid if HDMI Link Configuration bit is 1 (FRL mode) + if (hdmi_encoded_link_bw.bits.FRL_MODE) { + if (hdmi_encoded_link_bw.bits.BW_48Gbps) + supported_bw_in_kbps = 48000000; + else if (hdmi_encoded_link_bw.bits.BW_40Gbps) + supported_bw_in_kbps = 40000000; + else if (hdmi_encoded_link_bw.bits.BW_32Gbps) + supported_bw_in_kbps = 32000000; + else if (hdmi_encoded_link_bw.bits.BW_24Gbps) + supported_bw_in_kbps = 24000000; + else if (hdmi_encoded_link_bw.bits.BW_18Gbps) + supported_bw_in_kbps = 18000000; + else if (hdmi_encoded_link_bw.bits.BW_9Gbps) + supported_bw_in_kbps = 9000000; + } + + return supported_bw_in_kbps; +} + +static enum clock_source_id get_clock_source_id(struct dc_link *link) +{ + enum clock_source_id dp_cs_id = CLOCK_SOURCE_ID_UNDEFINED; + struct clock_source *dp_cs = link->dc->res_pool->dp_clock_source; + + if (dp_cs != NULL) { + dp_cs_id = dp_cs->id; + } else { + /* + * dp clock source is not initialized for some reason. + * Should not happen, CLOCK_SOURCE_ID_EXTERNAL will be used + */ + ASSERT(dp_cs); + } + + return dp_cs_id; +} + +static void dp_wa_power_up_0010FA(struct dc_link *link, uint8_t *dpcd_data, + int length) +{ + int retry = 0; + union dp_downstream_port_present ds_port = { 0 }; + + if (!link->dpcd_caps.dpcd_rev.raw) { + do { + dc_link_dp_receiver_power_ctrl(link, true); + core_link_read_dpcd(link, DP_DPCD_REV, + dpcd_data, length); + link->dpcd_caps.dpcd_rev.raw = dpcd_data[ + DP_DPCD_REV - + DP_DPCD_REV]; + } while (retry++ < 4 && !link->dpcd_caps.dpcd_rev.raw); + } + + ds_port.byte = dpcd_data[DP_DOWNSTREAMPORT_PRESENT - + DP_DPCD_REV]; + + if (link->dpcd_caps.dongle_type == DISPLAY_DONGLE_DP_VGA_CONVERTER) { + switch (link->dpcd_caps.branch_dev_id) { + /* 0010FA active dongles (DP-VGA, DP-DLDVI converters) power down + * all internal circuits including AUX communication preventing + * reading DPCD table and EDID (spec violation). + * Encoder will skip DP RX power down on disable_output to + * keep receiver powered all the time.*/ + case DP_BRANCH_DEVICE_ID_0010FA: + case DP_BRANCH_DEVICE_ID_0080E1: + case DP_BRANCH_DEVICE_ID_00E04C: + link->wa_flags.dp_keep_receiver_powered = true; + break; + + /* TODO: May need work around for other dongles. */ + default: + link->wa_flags.dp_keep_receiver_powered = false; + break; + } + } else + link->wa_flags.dp_keep_receiver_powered = false; +} + +bool dc_link_is_fec_supported(const struct dc_link *link) +{ + /* TODO - use asic cap instead of link_enc->features + * we no longer know which link enc to use for this link before commit + */ + struct link_encoder *link_enc = NULL; + + link_enc = link_enc_cfg_get_link_enc(link); + ASSERT(link_enc); + + return (dc_is_dp_signal(link->connector_signal) && link_enc && + link_enc->features.fec_supported && + link->dpcd_caps.fec_cap.bits.FEC_CAPABLE && + !IS_FPGA_MAXIMUS_DC(link->ctx->dce_environment)); +} + +bool dc_link_should_enable_fec(const struct dc_link *link) +{ + bool force_disable = false; + + if (link->fec_state == dc_link_fec_enabled) + force_disable = false; + else if (link->connector_signal != SIGNAL_TYPE_DISPLAY_PORT_MST && + link->local_sink && + link->local_sink->edid_caps.panel_patch.disable_fec) + force_disable = true; + else if (link->connector_signal == SIGNAL_TYPE_EDP + && (link->dpcd_caps.dsc_caps.dsc_basic_caps.fields. + dsc_support.DSC_SUPPORT == false + || link->panel_config.dsc.disable_dsc_edp + || !link->dc->caps.edp_dsc_support)) + force_disable = true; + + return !force_disable && dc_link_is_fec_supported(link); +} + +bool link_is_dp_128b_132b_signal(struct pipe_ctx *pipe_ctx) +{ + /* If this assert is hit then we have a link encoder dynamic management issue */ + ASSERT(pipe_ctx->stream_res.hpo_dp_stream_enc ? pipe_ctx->link_res.hpo_dp_link_enc != NULL : true); + return (pipe_ctx->stream_res.hpo_dp_stream_enc && + pipe_ctx->link_res.hpo_dp_link_enc && + dc_is_dp_signal(pipe_ctx->stream->signal)); +} + +bool dp_is_lttpr_present(struct dc_link *link) +{ + return (dp_parse_lttpr_repeater_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) != 0 && + link->dpcd_caps.lttpr_caps.max_lane_count > 0 && + link->dpcd_caps.lttpr_caps.max_lane_count <= 4 && + link->dpcd_caps.lttpr_caps.revision.raw >= 0x14); +} + +/* in DP compliance test, DPR-120 may have + * a random value in its MAX_LINK_BW dpcd field. + * We map it to the maximum supported link rate that + * is smaller than MAX_LINK_BW in this case. + */ +static enum dc_link_rate get_link_rate_from_max_link_bw( + uint8_t max_link_bw) +{ + enum dc_link_rate link_rate; + + if (max_link_bw >= LINK_RATE_HIGH3) { + link_rate = LINK_RATE_HIGH3; + } else if (max_link_bw < LINK_RATE_HIGH3 + && max_link_bw >= LINK_RATE_HIGH2) { + link_rate = LINK_RATE_HIGH2; + } else if (max_link_bw < LINK_RATE_HIGH2 + && max_link_bw >= LINK_RATE_HIGH) { + link_rate = LINK_RATE_HIGH; + } else if (max_link_bw < LINK_RATE_HIGH + && max_link_bw >= LINK_RATE_LOW) { + link_rate = LINK_RATE_LOW; + } else { + link_rate = LINK_RATE_UNKNOWN; + } + + return link_rate; +} + +static enum dc_link_rate get_lttpr_max_link_rate(struct dc_link *link) +{ + enum dc_link_rate lttpr_max_link_rate = link->dpcd_caps.lttpr_caps.max_link_rate; + + if (link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR20) + lttpr_max_link_rate = LINK_RATE_UHBR20; + else if (link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR13_5) + lttpr_max_link_rate = LINK_RATE_UHBR13_5; + else if (link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.bits.UHBR10) + lttpr_max_link_rate = LINK_RATE_UHBR10; + + return lttpr_max_link_rate; +} + +static enum dc_link_rate get_cable_max_link_rate(struct dc_link *link) +{ + enum dc_link_rate cable_max_link_rate = LINK_RATE_UNKNOWN; + + if (link->dpcd_caps.cable_id.bits.UHBR10_20_CAPABILITY & DP_UHBR20) + cable_max_link_rate = LINK_RATE_UHBR20; + else if (link->dpcd_caps.cable_id.bits.UHBR13_5_CAPABILITY) + cable_max_link_rate = LINK_RATE_UHBR13_5; + else if (link->dpcd_caps.cable_id.bits.UHBR10_20_CAPABILITY & DP_UHBR10) + cable_max_link_rate = LINK_RATE_UHBR10; + + return cable_max_link_rate; +} + +static inline bool reached_minimum_lane_count(enum dc_lane_count lane_count) +{ + return lane_count <= LANE_COUNT_ONE; +} + +static inline bool reached_minimum_link_rate(enum dc_link_rate link_rate) +{ + return link_rate <= LINK_RATE_LOW; +} + +static enum dc_lane_count reduce_lane_count(enum dc_lane_count lane_count) +{ + switch (lane_count) { + case LANE_COUNT_FOUR: + return LANE_COUNT_TWO; + case LANE_COUNT_TWO: + return LANE_COUNT_ONE; + case LANE_COUNT_ONE: + return LANE_COUNT_UNKNOWN; + default: + return LANE_COUNT_UNKNOWN; + } +} + +static enum dc_link_rate reduce_link_rate(enum dc_link_rate link_rate) +{ + switch (link_rate) { + case LINK_RATE_UHBR20: + return LINK_RATE_UHBR13_5; + case LINK_RATE_UHBR13_5: + return LINK_RATE_UHBR10; + case LINK_RATE_UHBR10: + return LINK_RATE_HIGH3; + case LINK_RATE_HIGH3: + return LINK_RATE_HIGH2; + case LINK_RATE_HIGH2: + return LINK_RATE_HIGH; + case LINK_RATE_HIGH: + return LINK_RATE_LOW; + case LINK_RATE_LOW: + return LINK_RATE_UNKNOWN; + default: + return LINK_RATE_UNKNOWN; + } +} + +static enum dc_lane_count increase_lane_count(enum dc_lane_count lane_count) +{ + switch (lane_count) { + case LANE_COUNT_ONE: + return LANE_COUNT_TWO; + case LANE_COUNT_TWO: + return LANE_COUNT_FOUR; + default: + return LANE_COUNT_UNKNOWN; + } +} + +static enum dc_link_rate increase_link_rate(struct dc_link *link, + enum dc_link_rate link_rate) +{ + switch (link_rate) { + case LINK_RATE_LOW: + return LINK_RATE_HIGH; + case LINK_RATE_HIGH: + return LINK_RATE_HIGH2; + case LINK_RATE_HIGH2: + return LINK_RATE_HIGH3; + case LINK_RATE_HIGH3: + return LINK_RATE_UHBR10; + case LINK_RATE_UHBR10: + /* upto DP2.x specs UHBR13.5 is the only link rate that could be + * not supported by DPRX when higher link rate is supported. + * so we treat it as a special case for code simplicity. When we + * have new specs with more link rates like this, we should + * consider a more generic solution to handle discrete link + * rate capabilities. + */ + return link->dpcd_caps.dp_128b_132b_supported_link_rates.bits.UHBR13_5 ? + LINK_RATE_UHBR13_5 : LINK_RATE_UHBR20; + case LINK_RATE_UHBR13_5: + return LINK_RATE_UHBR20; + default: + return LINK_RATE_UNKNOWN; + } +} + +static bool decide_fallback_link_setting_max_bw_policy( + struct dc_link *link, + const struct dc_link_settings *max, + struct dc_link_settings *cur, + enum link_training_result training_result) +{ + uint8_t cur_idx = 0, next_idx; + bool found = false; + + if (training_result == LINK_TRAINING_ABORT) + return false; + + while (cur_idx < ARRAY_SIZE(dp_lt_fallbacks)) + /* find current index */ + if (dp_lt_fallbacks[cur_idx].lane_count == cur->lane_count && + dp_lt_fallbacks[cur_idx].link_rate == cur->link_rate) + break; + else + cur_idx++; + + next_idx = cur_idx + 1; + + while (next_idx < ARRAY_SIZE(dp_lt_fallbacks)) + /* find next index */ + if (dp_lt_fallbacks[next_idx].lane_count > max->lane_count || + dp_lt_fallbacks[next_idx].link_rate > max->link_rate) + next_idx++; + else if (dp_lt_fallbacks[next_idx].link_rate == LINK_RATE_UHBR13_5 && + link->dpcd_caps.dp_128b_132b_supported_link_rates.bits.UHBR13_5 == 0) + /* upto DP2.x specs UHBR13.5 is the only link rate that + * could be not supported by DPRX when higher link rate + * is supported. so we treat it as a special case for + * code simplicity. When we have new specs with more + * link rates like this, we should consider a more + * generic solution to handle discrete link rate + * capabilities. + */ + next_idx++; + else + break; + + if (next_idx < ARRAY_SIZE(dp_lt_fallbacks)) { + cur->lane_count = dp_lt_fallbacks[next_idx].lane_count; + cur->link_rate = dp_lt_fallbacks[next_idx].link_rate; + found = true; + } + + return found; +} + +/* + * function: set link rate and lane count fallback based + * on current link setting and last link training result + * return value: + * true - link setting could be set + * false - has reached minimum setting + * and no further fallback could be done + */ +bool decide_fallback_link_setting( + struct dc_link *link, + struct dc_link_settings *max, + struct dc_link_settings *cur, + enum link_training_result training_result) +{ + if (link_dp_get_encoding_format(max) == DP_128b_132b_ENCODING || + link->dc->debug.force_dp2_lt_fallback_method) + return decide_fallback_link_setting_max_bw_policy(link, max, + cur, training_result); + + switch (training_result) { + case LINK_TRAINING_CR_FAIL_LANE0: + case LINK_TRAINING_CR_FAIL_LANE1: + case LINK_TRAINING_CR_FAIL_LANE23: + case LINK_TRAINING_LQA_FAIL: + { + if (!reached_minimum_link_rate(cur->link_rate)) { + cur->link_rate = reduce_link_rate(cur->link_rate); + } else if (!reached_minimum_lane_count(cur->lane_count)) { + cur->link_rate = max->link_rate; + if (training_result == LINK_TRAINING_CR_FAIL_LANE0) + return false; + else if (training_result == LINK_TRAINING_CR_FAIL_LANE1) + cur->lane_count = LANE_COUNT_ONE; + else if (training_result == LINK_TRAINING_CR_FAIL_LANE23) + cur->lane_count = LANE_COUNT_TWO; + else + cur->lane_count = reduce_lane_count(cur->lane_count); + } else { + return false; + } + break; + } + case LINK_TRAINING_EQ_FAIL_EQ: + case LINK_TRAINING_EQ_FAIL_CR_PARTIAL: + { + if (!reached_minimum_lane_count(cur->lane_count)) { + cur->lane_count = reduce_lane_count(cur->lane_count); + } else if (!reached_minimum_link_rate(cur->link_rate)) { + cur->link_rate = reduce_link_rate(cur->link_rate); + /* Reduce max link rate to avoid potential infinite loop. + * Needed so that any subsequent CR_FAIL fallback can't + * re-set the link rate higher than the link rate from + * the latest EQ_FAIL fallback. + */ + max->link_rate = cur->link_rate; + cur->lane_count = max->lane_count; + } else { + return false; + } + break; + } + case LINK_TRAINING_EQ_FAIL_CR: + { + if (!reached_minimum_link_rate(cur->link_rate)) { + cur->link_rate = reduce_link_rate(cur->link_rate); + /* Reduce max link rate to avoid potential infinite loop. + * Needed so that any subsequent CR_FAIL fallback can't + * re-set the link rate higher than the link rate from + * the latest EQ_FAIL fallback. + */ + max->link_rate = cur->link_rate; + cur->lane_count = max->lane_count; + } else { + return false; + } + break; + } + default: + return false; + } + return true; +} +static bool decide_dp_link_settings(struct dc_link *link, struct dc_link_settings *link_setting, uint32_t req_bw) +{ + struct dc_link_settings initial_link_setting = { + LANE_COUNT_ONE, LINK_RATE_LOW, LINK_SPREAD_DISABLED, false, 0}; + struct dc_link_settings current_link_setting = + initial_link_setting; + uint32_t link_bw; + + if (req_bw > dc_link_bandwidth_kbps(link, &link->verified_link_cap)) + return false; + + /* search for the minimum link setting that: + * 1. is supported according to the link training result + * 2. could support the b/w requested by the timing + */ + while (current_link_setting.link_rate <= + link->verified_link_cap.link_rate) { + link_bw = dc_link_bandwidth_kbps( + link, + ¤t_link_setting); + if (req_bw <= link_bw) { + *link_setting = current_link_setting; + return true; + } + + if (current_link_setting.lane_count < + link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + } else { + current_link_setting.link_rate = + increase_link_rate(link, + current_link_setting.link_rate); + current_link_setting.lane_count = + initial_link_setting.lane_count; + } + } + + return false; +} + +bool dc_link_decide_edp_link_settings(struct dc_link *link, struct dc_link_settings *link_setting, uint32_t req_bw) +{ + struct dc_link_settings initial_link_setting; + struct dc_link_settings current_link_setting; + uint32_t link_bw; + + /* + * edp_supported_link_rates_count is only valid for eDP v1.4 or higher. + * Per VESA eDP spec, "The DPCD revision for eDP v1.4 is 13h" + */ + if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_13 || + link->dpcd_caps.edp_supported_link_rates_count == 0) { + *link_setting = link->verified_link_cap; + return true; + } + + memset(&initial_link_setting, 0, sizeof(initial_link_setting)); + initial_link_setting.lane_count = LANE_COUNT_ONE; + initial_link_setting.link_rate = link->dpcd_caps.edp_supported_link_rates[0]; + initial_link_setting.link_spread = LINK_SPREAD_DISABLED; + initial_link_setting.use_link_rate_set = true; + initial_link_setting.link_rate_set = 0; + current_link_setting = initial_link_setting; + + /* search for the minimum link setting that: + * 1. is supported according to the link training result + * 2. could support the b/w requested by the timing + */ + while (current_link_setting.link_rate <= + link->verified_link_cap.link_rate) { + link_bw = dc_link_bandwidth_kbps( + link, + ¤t_link_setting); + if (req_bw <= link_bw) { + *link_setting = current_link_setting; + return true; + } + + if (current_link_setting.lane_count < + link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + } else { + if (current_link_setting.link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) { + current_link_setting.link_rate_set++; + current_link_setting.link_rate = + link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set]; + current_link_setting.lane_count = + initial_link_setting.lane_count; + } else + break; + } + } + return false; +} + +bool decide_edp_link_settings_with_dsc(struct dc_link *link, + struct dc_link_settings *link_setting, + uint32_t req_bw, + enum dc_link_rate max_link_rate) +{ + struct dc_link_settings initial_link_setting; + struct dc_link_settings current_link_setting; + uint32_t link_bw; + + unsigned int policy = 0; + + policy = link->panel_config.dsc.force_dsc_edp_policy; + if (max_link_rate == LINK_RATE_UNKNOWN) + max_link_rate = link->verified_link_cap.link_rate; + /* + * edp_supported_link_rates_count is only valid for eDP v1.4 or higher. + * Per VESA eDP spec, "The DPCD revision for eDP v1.4 is 13h" + */ + if ((link->dpcd_caps.dpcd_rev.raw < DPCD_REV_13 || + link->dpcd_caps.edp_supported_link_rates_count == 0)) { + /* for DSC enabled case, we search for minimum lane count */ + memset(&initial_link_setting, 0, sizeof(initial_link_setting)); + initial_link_setting.lane_count = LANE_COUNT_ONE; + initial_link_setting.link_rate = LINK_RATE_LOW; + initial_link_setting.link_spread = LINK_SPREAD_DISABLED; + initial_link_setting.use_link_rate_set = false; + initial_link_setting.link_rate_set = 0; + current_link_setting = initial_link_setting; + if (req_bw > dc_link_bandwidth_kbps(link, &link->verified_link_cap)) + return false; + + /* search for the minimum link setting that: + * 1. is supported according to the link training result + * 2. could support the b/w requested by the timing + */ + while (current_link_setting.link_rate <= + max_link_rate) { + link_bw = dc_link_bandwidth_kbps( + link, + ¤t_link_setting); + if (req_bw <= link_bw) { + *link_setting = current_link_setting; + return true; + } + if (policy) { + /* minimize lane */ + if (current_link_setting.link_rate < max_link_rate) { + current_link_setting.link_rate = + increase_link_rate(link, + current_link_setting.link_rate); + } else { + if (current_link_setting.lane_count < + link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + current_link_setting.link_rate = initial_link_setting.link_rate; + } else + break; + } + } else { + /* minimize link rate */ + if (current_link_setting.lane_count < + link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + } else { + current_link_setting.link_rate = + increase_link_rate(link, + current_link_setting.link_rate); + current_link_setting.lane_count = + initial_link_setting.lane_count; + } + } + } + return false; + } + + /* if optimize edp link is supported */ + memset(&initial_link_setting, 0, sizeof(initial_link_setting)); + initial_link_setting.lane_count = LANE_COUNT_ONE; + initial_link_setting.link_rate = link->dpcd_caps.edp_supported_link_rates[0]; + initial_link_setting.link_spread = LINK_SPREAD_DISABLED; + initial_link_setting.use_link_rate_set = true; + initial_link_setting.link_rate_set = 0; + current_link_setting = initial_link_setting; + + /* search for the minimum link setting that: + * 1. is supported according to the link training result + * 2. could support the b/w requested by the timing + */ + while (current_link_setting.link_rate <= + max_link_rate) { + link_bw = dc_link_bandwidth_kbps( + link, + ¤t_link_setting); + if (req_bw <= link_bw) { + *link_setting = current_link_setting; + return true; + } + if (policy) { + /* minimize lane */ + if (current_link_setting.link_rate_set < + link->dpcd_caps.edp_supported_link_rates_count + && current_link_setting.link_rate < max_link_rate) { + current_link_setting.link_rate_set++; + current_link_setting.link_rate = + link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set]; + } else { + if (current_link_setting.lane_count < link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + current_link_setting.link_rate_set = initial_link_setting.link_rate_set; + current_link_setting.link_rate = + link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set]; + } else + break; + } + } else { + /* minimize link rate */ + if (current_link_setting.lane_count < + link->verified_link_cap.lane_count) { + current_link_setting.lane_count = + increase_lane_count( + current_link_setting.lane_count); + } else { + if (current_link_setting.link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) { + current_link_setting.link_rate_set++; + current_link_setting.link_rate = + link->dpcd_caps.edp_supported_link_rates[current_link_setting.link_rate_set]; + current_link_setting.lane_count = + initial_link_setting.lane_count; + } else + break; + } + } + } + return false; +} + +static bool decide_mst_link_settings(const struct dc_link *link, struct dc_link_settings *link_setting) +{ + *link_setting = link->verified_link_cap; + return true; +} + +bool link_decide_link_settings(struct dc_stream_state *stream, + struct dc_link_settings *link_setting) +{ + struct dc_link *link = stream->link; + uint32_t req_bw = dc_bandwidth_in_kbps_from_timing(&stream->timing); + + memset(link_setting, 0, sizeof(*link_setting)); + + /* if preferred is specified through AMDDP, use it, if it's enough + * to drive the mode + */ + if (link->preferred_link_setting.lane_count != + LANE_COUNT_UNKNOWN && + link->preferred_link_setting.link_rate != + LINK_RATE_UNKNOWN) { + *link_setting = link->preferred_link_setting; + return true; + } + + /* MST doesn't perform link training for now + * TODO: add MST specific link training routine + */ + if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { + decide_mst_link_settings(link, link_setting); + } else if (link->connector_signal == SIGNAL_TYPE_EDP) { + /* enable edp link optimization for DSC eDP case */ + if (stream->timing.flags.DSC) { + enum dc_link_rate max_link_rate = LINK_RATE_UNKNOWN; + + if (link->panel_config.dsc.force_dsc_edp_policy) { + /* calculate link max link rate cap*/ + struct dc_link_settings tmp_link_setting; + struct dc_crtc_timing tmp_timing = stream->timing; + uint32_t orig_req_bw; + + tmp_link_setting.link_rate = LINK_RATE_UNKNOWN; + tmp_timing.flags.DSC = 0; + orig_req_bw = dc_bandwidth_in_kbps_from_timing(&tmp_timing); + dc_link_decide_edp_link_settings(link, &tmp_link_setting, orig_req_bw); + max_link_rate = tmp_link_setting.link_rate; + } + decide_edp_link_settings_with_dsc(link, link_setting, req_bw, max_link_rate); + } else { + dc_link_decide_edp_link_settings(link, link_setting, req_bw); + } + } else { + decide_dp_link_settings(link, link_setting, req_bw); + } + + return link_setting->lane_count != LANE_COUNT_UNKNOWN && + link_setting->link_rate != LINK_RATE_UNKNOWN; +} + +enum dp_link_encoding link_dp_get_encoding_format(const struct dc_link_settings *link_settings) +{ + if ((link_settings->link_rate >= LINK_RATE_LOW) && + (link_settings->link_rate <= LINK_RATE_HIGH3)) + return DP_8b_10b_ENCODING; + else if ((link_settings->link_rate >= LINK_RATE_UHBR10) && + (link_settings->link_rate <= LINK_RATE_UHBR20)) + return DP_128b_132b_ENCODING; + return DP_UNKNOWN_ENCODING; +} + +enum dp_link_encoding dc_link_dp_mst_decide_link_encoding_format(const struct dc_link *link) +{ + struct dc_link_settings link_settings = {0}; + + if (!dc_is_dp_signal(link->connector_signal)) + return DP_UNKNOWN_ENCODING; + + if (link->preferred_link_setting.lane_count != + LANE_COUNT_UNKNOWN && + link->preferred_link_setting.link_rate != + LINK_RATE_UNKNOWN) { + link_settings = link->preferred_link_setting; + } else { + decide_mst_link_settings(link, &link_settings); + } + + return link_dp_get_encoding_format(&link_settings); +} + +static void read_dp_device_vendor_id(struct dc_link *link) +{ + struct dp_device_vendor_id dp_id; + + /* read IEEE branch device id */ + core_link_read_dpcd( + link, + DP_BRANCH_OUI, + (uint8_t *)&dp_id, + sizeof(dp_id)); + + link->dpcd_caps.branch_dev_id = + (dp_id.ieee_oui[0] << 16) + + (dp_id.ieee_oui[1] << 8) + + dp_id.ieee_oui[2]; + + memmove( + link->dpcd_caps.branch_dev_name, + dp_id.ieee_device_id, + sizeof(dp_id.ieee_device_id)); +} + +static enum dc_status wake_up_aux_channel(struct dc_link *link) +{ + enum dc_status status = DC_ERROR_UNEXPECTED; + uint32_t aux_channel_retry_cnt = 0; + uint8_t dpcd_power_state = '\0'; + + while (status != DC_OK && aux_channel_retry_cnt < 10) { + status = core_link_read_dpcd(link, DP_SET_POWER, + &dpcd_power_state, sizeof(dpcd_power_state)); + + /* Delay 1 ms if AUX CH is in power down state. Based on spec + * section 2.3.1.2, if AUX CH may be powered down due to + * write to DPCD 600h = 2. Sink AUX CH is monitoring differential + * signal and may need up to 1 ms before being able to reply. + */ + if (status != DC_OK || dpcd_power_state == DP_SET_POWER_D3) { + udelay(1000); + aux_channel_retry_cnt++; + } + } + + if (status != DC_OK) { + dpcd_power_state = DP_SET_POWER_D0; + status = core_link_write_dpcd( + link, + DP_SET_POWER, + &dpcd_power_state, + sizeof(dpcd_power_state)); + + dpcd_power_state = DP_SET_POWER_D3; + status = core_link_write_dpcd( + link, + DP_SET_POWER, + &dpcd_power_state, + sizeof(dpcd_power_state)); + return DC_ERROR_UNEXPECTED; + } + + return DC_OK; +} + +static void get_active_converter_info( + uint8_t data, struct dc_link *link) +{ + union dp_downstream_port_present ds_port = { .byte = data }; + memset(&link->dpcd_caps.dongle_caps, 0, sizeof(link->dpcd_caps.dongle_caps)); + + /* decode converter info*/ + if (!ds_port.fields.PORT_PRESENT) { + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_NONE; + set_dongle_type(link->ddc, + link->dpcd_caps.dongle_type); + link->dpcd_caps.is_branch_dev = false; + return; + } + + /* DPCD 0x5 bit 0 = 1, it indicate it's branch device */ + link->dpcd_caps.is_branch_dev = ds_port.fields.PORT_PRESENT; + + switch (ds_port.fields.PORT_TYPE) { + case DOWNSTREAM_VGA: + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_VGA_CONVERTER; + break; + case DOWNSTREAM_DVI_HDMI_DP_PLUS_PLUS: + /* At this point we don't know is it DVI or HDMI or DP++, + * assume DVI.*/ + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_DP_DVI_CONVERTER; + break; + default: + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_NONE; + break; + } + + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_11) { + uint8_t det_caps[16]; /* CTS 4.2.2.7 expects source to read Detailed Capabilities Info : 00080h-0008F.*/ + union dwnstream_port_caps_byte0 *port_caps = + (union dwnstream_port_caps_byte0 *)det_caps; + if (core_link_read_dpcd(link, DP_DOWNSTREAM_PORT_0, + det_caps, sizeof(det_caps)) == DC_OK) { + + switch (port_caps->bits.DWN_STRM_PORTX_TYPE) { + /*Handle DP case as DONGLE_NONE*/ + case DOWN_STREAM_DETAILED_DP: + link->dpcd_caps.dongle_type = DISPLAY_DONGLE_NONE; + break; + case DOWN_STREAM_DETAILED_VGA: + link->dpcd_caps.dongle_type = + DISPLAY_DONGLE_DP_VGA_CONVERTER; + break; + case DOWN_STREAM_DETAILED_DVI: + link->dpcd_caps.dongle_type = + DISPLAY_DONGLE_DP_DVI_CONVERTER; + break; + case DOWN_STREAM_DETAILED_HDMI: + case DOWN_STREAM_DETAILED_DP_PLUS_PLUS: + /*Handle DP++ active converter case, process DP++ case as HDMI case according DP1.4 spec*/ + link->dpcd_caps.dongle_type = + DISPLAY_DONGLE_DP_HDMI_CONVERTER; + + link->dpcd_caps.dongle_caps.dongle_type = link->dpcd_caps.dongle_type; + if (ds_port.fields.DETAILED_CAPS) { + + union dwnstream_port_caps_byte3_hdmi + hdmi_caps = {.raw = det_caps[3] }; + union dwnstream_port_caps_byte2 + hdmi_color_caps = {.raw = det_caps[2] }; + link->dpcd_caps.dongle_caps.dp_hdmi_max_pixel_clk_in_khz = + det_caps[1] * 2500; + + link->dpcd_caps.dongle_caps.is_dp_hdmi_s3d_converter = + hdmi_caps.bits.FRAME_SEQ_TO_FRAME_PACK; + /*YCBCR capability only for HDMI case*/ + if (port_caps->bits.DWN_STRM_PORTX_TYPE + == DOWN_STREAM_DETAILED_HDMI) { + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_pass_through = + hdmi_caps.bits.YCrCr422_PASS_THROUGH; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_pass_through = + hdmi_caps.bits.YCrCr420_PASS_THROUGH; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr422_converter = + hdmi_caps.bits.YCrCr422_CONVERSION; + link->dpcd_caps.dongle_caps.is_dp_hdmi_ycbcr420_converter = + hdmi_caps.bits.YCrCr420_CONVERSION; + } + + link->dpcd_caps.dongle_caps.dp_hdmi_max_bpc = + translate_dpcd_max_bpc( + hdmi_color_caps.bits.MAX_BITS_PER_COLOR_COMPONENT); + + if (link->dc->caps.dp_hdmi21_pcon_support) { + union hdmi_encoded_link_bw hdmi_encoded_link_bw; + + link->dpcd_caps.dongle_caps.dp_hdmi_frl_max_link_bw_in_kbps = + dc_link_bw_kbps_from_raw_frl_link_rate_data( + hdmi_color_caps.bits.MAX_ENCODED_LINK_BW_SUPPORT); + + // Intersect reported max link bw support with the supported link rate post FRL link training + if (core_link_read_dpcd(link, DP_PCON_HDMI_POST_FRL_STATUS, + &hdmi_encoded_link_bw.raw, sizeof(hdmi_encoded_link_bw)) == DC_OK) { + link->dpcd_caps.dongle_caps.dp_hdmi_frl_max_link_bw_in_kbps = intersect_frl_link_bw_support( + link->dpcd_caps.dongle_caps.dp_hdmi_frl_max_link_bw_in_kbps, + hdmi_encoded_link_bw); + } + + if (link->dpcd_caps.dongle_caps.dp_hdmi_frl_max_link_bw_in_kbps > 0) + link->dpcd_caps.dongle_caps.extendedCapValid = true; + } + + if (link->dpcd_caps.dongle_caps.dp_hdmi_max_pixel_clk_in_khz != 0) + link->dpcd_caps.dongle_caps.extendedCapValid = true; + } + + break; + } + } + } + + set_dongle_type(link->ddc, link->dpcd_caps.dongle_type); + + { + struct dp_sink_hw_fw_revision dp_hw_fw_revision; + + core_link_read_dpcd( + link, + DP_BRANCH_REVISION_START, + (uint8_t *)&dp_hw_fw_revision, + sizeof(dp_hw_fw_revision)); + + link->dpcd_caps.branch_hw_revision = + dp_hw_fw_revision.ieee_hw_rev; + + memmove( + link->dpcd_caps.branch_fw_revision, + dp_hw_fw_revision.ieee_fw_rev, + sizeof(dp_hw_fw_revision.ieee_fw_rev)); + } + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_14 && + link->dpcd_caps.dongle_type != DISPLAY_DONGLE_NONE) { + union dp_dfp_cap_ext dfp_cap_ext; + memset(&dfp_cap_ext, '\0', sizeof (dfp_cap_ext)); + core_link_read_dpcd( + link, + DP_DFP_CAPABILITY_EXTENSION_SUPPORT, + dfp_cap_ext.raw, + sizeof(dfp_cap_ext.raw)); + link->dpcd_caps.dongle_caps.dfp_cap_ext.supported = dfp_cap_ext.fields.supported; + link->dpcd_caps.dongle_caps.dfp_cap_ext.max_pixel_rate_in_mps = + dfp_cap_ext.fields.max_pixel_rate_in_mps[0] + + (dfp_cap_ext.fields.max_pixel_rate_in_mps[1] << 8); + link->dpcd_caps.dongle_caps.dfp_cap_ext.max_video_h_active_width = + dfp_cap_ext.fields.max_video_h_active_width[0] + + (dfp_cap_ext.fields.max_video_h_active_width[1] << 8); + link->dpcd_caps.dongle_caps.dfp_cap_ext.max_video_v_active_height = + dfp_cap_ext.fields.max_video_v_active_height[0] + + (dfp_cap_ext.fields.max_video_v_active_height[1] << 8); + link->dpcd_caps.dongle_caps.dfp_cap_ext.encoding_format_caps = + dfp_cap_ext.fields.encoding_format_caps; + link->dpcd_caps.dongle_caps.dfp_cap_ext.rgb_color_depth_caps = + dfp_cap_ext.fields.rgb_color_depth_caps; + link->dpcd_caps.dongle_caps.dfp_cap_ext.ycbcr444_color_depth_caps = + dfp_cap_ext.fields.ycbcr444_color_depth_caps; + link->dpcd_caps.dongle_caps.dfp_cap_ext.ycbcr422_color_depth_caps = + dfp_cap_ext.fields.ycbcr422_color_depth_caps; + link->dpcd_caps.dongle_caps.dfp_cap_ext.ycbcr420_color_depth_caps = + dfp_cap_ext.fields.ycbcr420_color_depth_caps; + DC_LOG_DP2("DFP capability extension is read at link %d", link->link_index); + DC_LOG_DP2("\tdfp_cap_ext.supported = %s", link->dpcd_caps.dongle_caps.dfp_cap_ext.supported ? "true" : "false"); + DC_LOG_DP2("\tdfp_cap_ext.max_pixel_rate_in_mps = %d", link->dpcd_caps.dongle_caps.dfp_cap_ext.max_pixel_rate_in_mps); + DC_LOG_DP2("\tdfp_cap_ext.max_video_h_active_width = %d", link->dpcd_caps.dongle_caps.dfp_cap_ext.max_video_h_active_width); + DC_LOG_DP2("\tdfp_cap_ext.max_video_v_active_height = %d", link->dpcd_caps.dongle_caps.dfp_cap_ext.max_video_v_active_height); + } +} + +static void apply_usbc_combo_phy_reset_wa(struct dc_link *link, + struct dc_link_settings *link_settings) +{ + /* Temporary Renoir-specific workaround PHY will sometimes be in bad + * state on hotplugging display from certain USB-C dongle, so add extra + * cycle of enabling and disabling the PHY before first link training. + */ + struct link_resource link_res = {0}; + enum clock_source_id dp_cs_id = get_clock_source_id(link); + + dp_enable_link_phy(link, &link_res, link->connector_signal, + dp_cs_id, link_settings); + dp_disable_link_phy(link, &link_res, link->connector_signal); +} + +static bool dp_overwrite_extended_receiver_cap(struct dc_link *link) +{ + uint8_t dpcd_data[16]; + uint32_t read_dpcd_retry_cnt = 3; + enum dc_status status = DC_ERROR_UNEXPECTED; + union dp_downstream_port_present ds_port = { 0 }; + union down_stream_port_count down_strm_port_count; + union edp_configuration_cap edp_config_cap; + + int i; + + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( + link, + DP_DPCD_REV, + dpcd_data, + sizeof(dpcd_data)); + if (status == DC_OK) + break; + } + + link->dpcd_caps.dpcd_rev.raw = + dpcd_data[DP_DPCD_REV - DP_DPCD_REV]; + + if (dpcd_data[DP_MAX_LANE_COUNT - DP_DPCD_REV] == 0) + return false; + + ds_port.byte = dpcd_data[DP_DOWNSTREAMPORT_PRESENT - + DP_DPCD_REV]; + + get_active_converter_info(ds_port.byte, link); + + down_strm_port_count.raw = dpcd_data[DP_DOWN_STREAM_PORT_COUNT - + DP_DPCD_REV]; + + link->dpcd_caps.allow_invalid_MSA_timing_param = + down_strm_port_count.bits.IGNORE_MSA_TIMING_PARAM; + + link->dpcd_caps.max_ln_count.raw = dpcd_data[ + DP_MAX_LANE_COUNT - DP_DPCD_REV]; + + link->dpcd_caps.max_down_spread.raw = dpcd_data[ + DP_MAX_DOWNSPREAD - DP_DPCD_REV]; + + link->reported_link_cap.lane_count = + link->dpcd_caps.max_ln_count.bits.MAX_LANE_COUNT; + link->reported_link_cap.link_rate = dpcd_data[ + DP_MAX_LINK_RATE - DP_DPCD_REV]; + link->reported_link_cap.link_spread = + link->dpcd_caps.max_down_spread.bits.MAX_DOWN_SPREAD ? + LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED; + + edp_config_cap.raw = dpcd_data[ + DP_EDP_CONFIGURATION_CAP - DP_DPCD_REV]; + link->dpcd_caps.panel_mode_edp = + edp_config_cap.bits.ALT_SCRAMBLER_RESET; + link->dpcd_caps.dpcd_display_control_capable = + edp_config_cap.bits.DPCD_DISPLAY_CONTROL_CAPABLE; + + return true; +} + +void dc_link_overwrite_extended_receiver_cap( + struct dc_link *link) +{ + dp_overwrite_extended_receiver_cap(link); +} + +void dpcd_set_source_specific_data(struct dc_link *link) +{ + if (!link->dc->vendor_signature.is_valid) { + enum dc_status result_write_min_hblank = DC_NOT_SUPPORTED; + struct dpcd_amd_signature amd_signature = {0}; + struct dpcd_amd_device_id amd_device_id = {0}; + + amd_device_id.device_id_byte1 = + (uint8_t)(link->ctx->asic_id.chip_id); + amd_device_id.device_id_byte2 = + (uint8_t)(link->ctx->asic_id.chip_id >> 8); + amd_device_id.dce_version = + (uint8_t)(link->ctx->dce_version); + amd_device_id.dal_version_byte1 = 0x0; // needed? where to get? + amd_device_id.dal_version_byte2 = 0x0; // needed? where to get? + + core_link_read_dpcd(link, DP_SOURCE_OUI, + (uint8_t *)(&amd_signature), + sizeof(amd_signature)); + + if (!((amd_signature.AMD_IEEE_TxSignature_byte1 == 0x0) && + (amd_signature.AMD_IEEE_TxSignature_byte2 == 0x0) && + (amd_signature.AMD_IEEE_TxSignature_byte3 == 0x1A))) { + + amd_signature.AMD_IEEE_TxSignature_byte1 = 0x0; + amd_signature.AMD_IEEE_TxSignature_byte2 = 0x0; + amd_signature.AMD_IEEE_TxSignature_byte3 = 0x1A; + + core_link_write_dpcd(link, DP_SOURCE_OUI, + (uint8_t *)(&amd_signature), + sizeof(amd_signature)); + } + + core_link_write_dpcd(link, DP_SOURCE_OUI+0x03, + (uint8_t *)(&amd_device_id), + sizeof(amd_device_id)); + + if (link->ctx->dce_version >= DCN_VERSION_2_0 && + link->dc->caps.min_horizontal_blanking_period != 0) { + + uint8_t hblank_size = (uint8_t)link->dc->caps.min_horizontal_blanking_period; + + result_write_min_hblank = core_link_write_dpcd(link, + DP_SOURCE_MINIMUM_HBLANK_SUPPORTED, (uint8_t *)(&hblank_size), + sizeof(hblank_size)); + } + DC_TRACE_LEVEL_MESSAGE(DAL_TRACE_LEVEL_INFORMATION, + WPP_BIT_FLAG_DC_DETECTION_DP_CAPS, + "result=%u link_index=%u enum dce_version=%d DPCD=0x%04X min_hblank=%u branch_dev_id=0x%x branch_dev_name='%c%c%c%c%c%c'", + result_write_min_hblank, + link->link_index, + link->ctx->dce_version, + DP_SOURCE_MINIMUM_HBLANK_SUPPORTED, + link->dc->caps.min_horizontal_blanking_period, + link->dpcd_caps.branch_dev_id, + link->dpcd_caps.branch_dev_name[0], + link->dpcd_caps.branch_dev_name[1], + link->dpcd_caps.branch_dev_name[2], + link->dpcd_caps.branch_dev_name[3], + link->dpcd_caps.branch_dev_name[4], + link->dpcd_caps.branch_dev_name[5]); + } else { + core_link_write_dpcd(link, DP_SOURCE_OUI, + link->dc->vendor_signature.data.raw, + sizeof(link->dc->vendor_signature.data.raw)); + } +} + +void dpcd_write_cable_id_to_dprx(struct dc_link *link) +{ + if (!link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED || + link->dpcd_caps.cable_id.raw == 0 || + link->dprx_states.cable_id_written) + return; + + core_link_write_dpcd(link, DP_CABLE_ATTRIBUTES_UPDATED_BY_DPTX, + &link->dpcd_caps.cable_id.raw, + sizeof(link->dpcd_caps.cable_id.raw)); + + link->dprx_states.cable_id_written = 1; +} + +static bool get_usbc_cable_id(struct dc_link *link, union dp_cable_id *cable_id) +{ + union dmub_rb_cmd cmd; + + if (!link->ctx->dmub_srv || + link->ep_type != DISPLAY_ENDPOINT_PHY || + link->link_enc->features.flags.bits.DP_IS_USB_C == 0) + return false; + + memset(&cmd, 0, sizeof(cmd)); + cmd.cable_id.header.type = DMUB_CMD_GET_USBC_CABLE_ID; + cmd.cable_id.header.payload_bytes = sizeof(cmd.cable_id.data); + cmd.cable_id.data.input.phy_inst = resource_transmitter_to_phy_idx( + link->dc, link->link_enc->transmitter); + if (dc_dmub_srv_cmd_with_reply_data(link->ctx->dmub_srv, &cmd) && + cmd.cable_id.header.ret_status == 1) { + cable_id->raw = cmd.cable_id.data.output_raw; + DC_LOG_DC("usbc_cable_id = %d.\n", cable_id->raw); + } + return cmd.cable_id.header.ret_status == 1; +} + +static void retrieve_cable_id(struct dc_link *link) +{ + union dp_cable_id usbc_cable_id; + + link->dpcd_caps.cable_id.raw = 0; + core_link_read_dpcd(link, DP_CABLE_ATTRIBUTES_UPDATED_BY_DPRX, + &link->dpcd_caps.cable_id.raw, sizeof(uint8_t)); + + if (get_usbc_cable_id(link, &usbc_cable_id)) + link->dpcd_caps.cable_id = intersect_cable_id( + &link->dpcd_caps.cable_id, &usbc_cable_id); +} + +bool read_is_mst_supported(struct dc_link *link) +{ + bool mst = false; + enum dc_status st = DC_OK; + union dpcd_rev rev; + union mstm_cap cap; + + if (link->preferred_training_settings.mst_enable && + *link->preferred_training_settings.mst_enable == false) { + return false; + } + + rev.raw = 0; + cap.raw = 0; + + st = core_link_read_dpcd(link, DP_DPCD_REV, &rev.raw, + sizeof(rev)); + + if (st == DC_OK && rev.raw >= DPCD_REV_12) { + + st = core_link_read_dpcd(link, DP_MSTM_CAP, + &cap.raw, sizeof(cap)); + if (st == DC_OK && cap.bits.MST_CAP == 1) + mst = true; + } + return mst; + +} + +/* Read additional sink caps defined in source specific DPCD area + * This function currently only reads from SinkCapability address (DP_SOURCE_SINK_CAP) + * TODO: Add FS caps and read from DP_SOURCE_SINK_FS_CAP as well + */ +static bool dpcd_read_sink_ext_caps(struct dc_link *link) +{ + uint8_t dpcd_data; + + if (!link) + return false; + + if (core_link_read_dpcd(link, DP_SOURCE_SINK_CAP, &dpcd_data, 1) != DC_OK) + return false; + + link->dpcd_sink_ext_caps.raw = dpcd_data; + return true; +} + +enum dc_status dp_retrieve_lttpr_cap(struct dc_link *link) +{ + uint8_t lttpr_dpcd_data[8]; + enum dc_status status; + bool is_lttpr_present; + + /* Logic to determine LTTPR support*/ + bool vbios_lttpr_interop = link->dc->caps.vbios_lttpr_aware; + + if (!vbios_lttpr_interop || !link->dc->caps.extended_aux_timeout_support) + return DC_NOT_SUPPORTED; + + /* By reading LTTPR capability, RX assumes that we will enable + * LTTPR extended aux timeout if LTTPR is present. + */ + status = core_link_read_dpcd( + link, + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV, + lttpr_dpcd_data, + sizeof(lttpr_dpcd_data)); + + link->dpcd_caps.lttpr_caps.revision.raw = + lttpr_dpcd_data[DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.max_link_rate = + lttpr_dpcd_data[DP_MAX_LINK_RATE_PHY_REPEATER - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.phy_repeater_cnt = + lttpr_dpcd_data[DP_PHY_REPEATER_CNT - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.max_lane_count = + lttpr_dpcd_data[DP_MAX_LANE_COUNT_PHY_REPEATER - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.mode = + lttpr_dpcd_data[DP_PHY_REPEATER_MODE - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.max_ext_timeout = + lttpr_dpcd_data[DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + link->dpcd_caps.lttpr_caps.main_link_channel_coding.raw = + lttpr_dpcd_data[DP_MAIN_LINK_CHANNEL_CODING_PHY_REPEATER - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + link->dpcd_caps.lttpr_caps.supported_128b_132b_rates.raw = + lttpr_dpcd_data[DP_PHY_REPEATER_128B132B_RATES - + DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV]; + + /* If this chip cap is set, at least one retimer must exist in the chain + * Override count to 1 if we receive a known bad count (0 or an invalid value) */ + if ((link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) && + (dp_parse_lttpr_repeater_count(link->dpcd_caps.lttpr_caps.phy_repeater_cnt) == 0)) { + ASSERT(0); + link->dpcd_caps.lttpr_caps.phy_repeater_cnt = 0x80; + DC_LOG_DC("lttpr_caps forced phy_repeater_cnt = %d\n", link->dpcd_caps.lttpr_caps.phy_repeater_cnt); + } + + /* Attempt to train in LTTPR transparent mode if repeater count exceeds 8. */ + is_lttpr_present = dp_is_lttpr_present(link); + + if (is_lttpr_present) + CONN_DATA_DETECT(link, lttpr_dpcd_data, sizeof(lttpr_dpcd_data), "LTTPR Caps: "); + + DC_LOG_DC("is_lttpr_present = %d\n", is_lttpr_present); + return status; +} + +static bool retrieve_link_cap(struct dc_link *link) +{ + /* DP_ADAPTER_CAP - DP_DPCD_REV + 1 == 16 and also DP_DSC_BITS_PER_PIXEL_INC - DP_DSC_SUPPORT + 1 == 16, + * which means size 16 will be good for both of those DPCD register block reads + */ + uint8_t dpcd_data[16]; + /*Only need to read 1 byte starting from DP_DPRX_FEATURE_ENUMERATION_LIST. + */ + uint8_t dpcd_dprx_data = '\0'; + + struct dp_device_vendor_id sink_id; + union down_stream_port_count down_strm_port_count; + union edp_configuration_cap edp_config_cap; + union dp_downstream_port_present ds_port = { 0 }; + enum dc_status status = DC_ERROR_UNEXPECTED; + uint32_t read_dpcd_retry_cnt = 3; + int i; + struct dp_sink_hw_fw_revision dp_hw_fw_revision; + const uint32_t post_oui_delay = 30; // 30ms + + memset(dpcd_data, '\0', sizeof(dpcd_data)); + memset(&down_strm_port_count, + '\0', sizeof(union down_stream_port_count)); + memset(&edp_config_cap, '\0', + sizeof(union edp_configuration_cap)); + + /* if extended timeout is supported in hardware, + * default to LTTPR timeout (3.2ms) first as a W/A for DP link layer + * CTS 4.2.1.1 regression introduced by CTS specs requirement update. + */ + try_to_configure_aux_timeout(link->ddc, + LINK_AUX_DEFAULT_LTTPR_TIMEOUT_PERIOD); + + status = dp_retrieve_lttpr_cap(link); + + if (status != DC_OK) { + status = wake_up_aux_channel(link); + if (status == DC_OK) + dp_retrieve_lttpr_cap(link); + else + return false; + } + + if (dp_is_lttpr_present(link)) + configure_lttpr_mode_transparent(link); + + /* Read DP tunneling information. */ + status = dpcd_get_tunneling_device_data(link); + + dpcd_set_source_specific_data(link); + /* Sink may need to configure internals based on vendor, so allow some + * time before proceeding with possibly vendor specific transactions + */ + msleep(post_oui_delay); + + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( + link, + DP_DPCD_REV, + dpcd_data, + sizeof(dpcd_data)); + if (status == DC_OK) + break; + } + + + if (status != DC_OK) { + dm_error("%s: Read receiver caps dpcd data failed.\n", __func__); + return false; + } + + if (!dp_is_lttpr_present(link)) + try_to_configure_aux_timeout(link->ddc, LINK_AUX_DEFAULT_TIMEOUT_PERIOD); + + + { + union training_aux_rd_interval aux_rd_interval; + + aux_rd_interval.raw = + dpcd_data[DP_TRAINING_AUX_RD_INTERVAL]; + + link->dpcd_caps.ext_receiver_cap_field_present = + aux_rd_interval.bits.EXT_RECEIVER_CAP_FIELD_PRESENT == 1 ? true:false; + + if (aux_rd_interval.bits.EXT_RECEIVER_CAP_FIELD_PRESENT == 1) { + uint8_t ext_cap_data[16]; + + memset(ext_cap_data, '\0', sizeof(ext_cap_data)); + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( + link, + DP_DP13_DPCD_REV, + ext_cap_data, + sizeof(ext_cap_data)); + if (status == DC_OK) { + memcpy(dpcd_data, ext_cap_data, sizeof(dpcd_data)); + break; + } + } + if (status != DC_OK) + dm_error("%s: Read extend caps data failed, use cap from dpcd 0.\n", __func__); + } + } + + link->dpcd_caps.dpcd_rev.raw = + dpcd_data[DP_DPCD_REV - DP_DPCD_REV]; + + if (link->dpcd_caps.ext_receiver_cap_field_present) { + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( + link, + DP_DPRX_FEATURE_ENUMERATION_LIST, + &dpcd_dprx_data, + sizeof(dpcd_dprx_data)); + if (status == DC_OK) + break; + } + + link->dpcd_caps.dprx_feature.raw = dpcd_dprx_data; + + if (status != DC_OK) + dm_error("%s: Read DPRX caps data failed.\n", __func__); + + /* AdaptiveSyncCapability */ + dpcd_dprx_data = 0; + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( + link, DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1, + &dpcd_dprx_data, sizeof(dpcd_dprx_data)); + if (status == DC_OK) + break; + } + + link->dpcd_caps.adaptive_sync_caps.dp_adap_sync_caps.raw = dpcd_dprx_data; + + if (status != DC_OK) + dm_error("%s: Read DPRX caps data failed. Addr:%#x\n", + __func__, DP_DPRX_FEATURE_ENUMERATION_LIST_CONT_1); + } + + else { + link->dpcd_caps.dprx_feature.raw = 0; + } + + + /* Error condition checking... + * It is impossible for Sink to report Max Lane Count = 0. + * It is possible for Sink to report Max Link Rate = 0, if it is + * an eDP device that is reporting specialized link rates in the + * SUPPORTED_LINK_RATE table. + */ + if (dpcd_data[DP_MAX_LANE_COUNT - DP_DPCD_REV] == 0) + return false; + + ds_port.byte = dpcd_data[DP_DOWNSTREAMPORT_PRESENT - + DP_DPCD_REV]; + + read_dp_device_vendor_id(link); + + /* TODO - decouple raw mst capability from policy decision */ + link->dpcd_caps.is_mst_capable = read_is_mst_supported(link); + + get_active_converter_info(ds_port.byte, link); + + dp_wa_power_up_0010FA(link, dpcd_data, sizeof(dpcd_data)); + + down_strm_port_count.raw = dpcd_data[DP_DOWN_STREAM_PORT_COUNT - + DP_DPCD_REV]; + + link->dpcd_caps.allow_invalid_MSA_timing_param = + down_strm_port_count.bits.IGNORE_MSA_TIMING_PARAM; + + link->dpcd_caps.max_ln_count.raw = dpcd_data[ + DP_MAX_LANE_COUNT - DP_DPCD_REV]; + + link->dpcd_caps.max_down_spread.raw = dpcd_data[ + DP_MAX_DOWNSPREAD - DP_DPCD_REV]; + + link->reported_link_cap.lane_count = + link->dpcd_caps.max_ln_count.bits.MAX_LANE_COUNT; + link->reported_link_cap.link_rate = get_link_rate_from_max_link_bw( + dpcd_data[DP_MAX_LINK_RATE - DP_DPCD_REV]); + link->reported_link_cap.link_spread = + link->dpcd_caps.max_down_spread.bits.MAX_DOWN_SPREAD ? + LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED; + + edp_config_cap.raw = dpcd_data[ + DP_EDP_CONFIGURATION_CAP - DP_DPCD_REV]; + link->dpcd_caps.panel_mode_edp = + edp_config_cap.bits.ALT_SCRAMBLER_RESET; + link->dpcd_caps.dpcd_display_control_capable = + edp_config_cap.bits.DPCD_DISPLAY_CONTROL_CAPABLE; + link->dpcd_caps.channel_coding_cap.raw = + dpcd_data[DP_MAIN_LINK_CHANNEL_CODING - DP_DPCD_REV]; + link->test_pattern_enabled = false; + link->compliance_test_state.raw = 0; + + /* read sink count */ + core_link_read_dpcd(link, + DP_SINK_COUNT, + &link->dpcd_caps.sink_count.raw, + sizeof(link->dpcd_caps.sink_count.raw)); + + /* read sink ieee oui */ + core_link_read_dpcd(link, + DP_SINK_OUI, + (uint8_t *)(&sink_id), + sizeof(sink_id)); + + link->dpcd_caps.sink_dev_id = + (sink_id.ieee_oui[0] << 16) + + (sink_id.ieee_oui[1] << 8) + + (sink_id.ieee_oui[2]); + + memmove( + link->dpcd_caps.sink_dev_id_str, + sink_id.ieee_device_id, + sizeof(sink_id.ieee_device_id)); + + core_link_read_dpcd( + link, + DP_SINK_HW_REVISION_START, + (uint8_t *)&dp_hw_fw_revision, + sizeof(dp_hw_fw_revision)); + + link->dpcd_caps.sink_hw_revision = + dp_hw_fw_revision.ieee_hw_rev; + + memmove( + link->dpcd_caps.sink_fw_revision, + dp_hw_fw_revision.ieee_fw_rev, + sizeof(dp_hw_fw_revision.ieee_fw_rev)); + + /* Quirk for Retina panels: wrong DP_MAX_LINK_RATE */ + { + uint8_t str_mbp_2018[] = { 101, 68, 21, 103, 98, 97 }; + uint8_t fwrev_mbp_2018[] = { 7, 4 }; + uint8_t fwrev_mbp_2018_vega[] = { 8, 4 }; + + /* We also check for the firmware revision as 16,1 models have an + * identical device id and are incorrectly quirked otherwise. + */ + if ((link->dpcd_caps.sink_dev_id == 0x0010fa) && + !memcmp(link->dpcd_caps.sink_dev_id_str, str_mbp_2018, + sizeof(str_mbp_2018)) && + (!memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018, + sizeof(fwrev_mbp_2018)) || + !memcmp(link->dpcd_caps.sink_fw_revision, fwrev_mbp_2018_vega, + sizeof(fwrev_mbp_2018_vega)))) { + link->reported_link_cap.link_rate = LINK_RATE_RBR2; + } + } + + memset(&link->dpcd_caps.dsc_caps, '\0', + sizeof(link->dpcd_caps.dsc_caps)); + memset(&link->dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap)); + /* Read DSC and FEC sink capabilities if DP revision is 1.4 and up */ + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_14) { + status = core_link_read_dpcd( + link, + DP_FEC_CAPABILITY, + &link->dpcd_caps.fec_cap.raw, + sizeof(link->dpcd_caps.fec_cap.raw)); + status = core_link_read_dpcd( + link, + DP_DSC_SUPPORT, + link->dpcd_caps.dsc_caps.dsc_basic_caps.raw, + sizeof(link->dpcd_caps.dsc_caps.dsc_basic_caps.raw)); + if (link->dpcd_caps.dongle_type != DISPLAY_DONGLE_NONE) { + status = core_link_read_dpcd( + link, + DP_DSC_BRANCH_OVERALL_THROUGHPUT_0, + link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.raw, + sizeof(link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.raw)); + DC_LOG_DSC("DSC branch decoder capability is read at link %d", link->link_index); + DC_LOG_DSC("\tBRANCH_OVERALL_THROUGHPUT_0 = 0x%02x", + link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.fields.BRANCH_OVERALL_THROUGHPUT_0); + DC_LOG_DSC("\tBRANCH_OVERALL_THROUGHPUT_1 = 0x%02x", + link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.fields.BRANCH_OVERALL_THROUGHPUT_1); + DC_LOG_DSC("\tBRANCH_MAX_LINE_WIDTH 0x%02x", + link->dpcd_caps.dsc_caps.dsc_branch_decoder_caps.fields.BRANCH_MAX_LINE_WIDTH); + } + + /* Apply work around to disable FEC and DSC for USB4 tunneling in TBT3 compatibility mode + * only if required. + */ + if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA && + link->dc->debug.dpia_debug.bits.enable_force_tbt3_work_around && + link->dpcd_caps.is_branch_dev && + link->dpcd_caps.branch_dev_id == DP_BRANCH_DEVICE_ID_90CC24 && + link->dpcd_caps.branch_hw_revision == DP_BRANCH_HW_REV_10 && + (link->dpcd_caps.fec_cap.bits.FEC_CAPABLE || + link->dpcd_caps.dsc_caps.dsc_basic_caps.fields.dsc_support.DSC_SUPPORT)) { + /* A TBT3 device is expected to report no support for FEC or DSC to a USB4 DPIA. + * Clear FEC and DSC capabilities as a work around if that is not the case. + */ + link->wa_flags.dpia_forced_tbt3_mode = true; + memset(&link->dpcd_caps.dsc_caps, '\0', sizeof(link->dpcd_caps.dsc_caps)); + memset(&link->dpcd_caps.fec_cap, '\0', sizeof(link->dpcd_caps.fec_cap)); + DC_LOG_DSC("Clear DSC SUPPORT for USB4 link(%d) in TBT3 compatibility mode", link->link_index); + } else + link->wa_flags.dpia_forced_tbt3_mode = false; + } + + if (!dpcd_read_sink_ext_caps(link)) + link->dpcd_sink_ext_caps.raw = 0; + + if (link->dpcd_caps.channel_coding_cap.bits.DP_128b_132b_SUPPORTED) { + DC_LOG_DP2("128b/132b encoding is supported at link %d", link->link_index); + + core_link_read_dpcd(link, + DP_128B132B_SUPPORTED_LINK_RATES, + &link->dpcd_caps.dp_128b_132b_supported_link_rates.raw, + sizeof(link->dpcd_caps.dp_128b_132b_supported_link_rates.raw)); + if (link->dpcd_caps.dp_128b_132b_supported_link_rates.bits.UHBR20) + link->reported_link_cap.link_rate = LINK_RATE_UHBR20; + else if (link->dpcd_caps.dp_128b_132b_supported_link_rates.bits.UHBR13_5) + link->reported_link_cap.link_rate = LINK_RATE_UHBR13_5; + else if (link->dpcd_caps.dp_128b_132b_supported_link_rates.bits.UHBR10) + link->reported_link_cap.link_rate = LINK_RATE_UHBR10; + else + dm_error("%s: Invalid RX 128b_132b_supported_link_rates\n", __func__); + DC_LOG_DP2("128b/132b supported link rates is read at link %d", link->link_index); + DC_LOG_DP2("\tmax 128b/132b link rate support is %d.%d GHz", + link->reported_link_cap.link_rate / 100, + link->reported_link_cap.link_rate % 100); + + core_link_read_dpcd(link, + DP_SINK_VIDEO_FALLBACK_FORMATS, + &link->dpcd_caps.fallback_formats.raw, + sizeof(link->dpcd_caps.fallback_formats.raw)); + DC_LOG_DP2("sink video fallback format is read at link %d", link->link_index); + if (link->dpcd_caps.fallback_formats.bits.dp_1920x1080_60Hz_24bpp_support) + DC_LOG_DP2("\t1920x1080@60Hz 24bpp fallback format supported"); + if (link->dpcd_caps.fallback_formats.bits.dp_1280x720_60Hz_24bpp_support) + DC_LOG_DP2("\t1280x720@60Hz 24bpp fallback format supported"); + if (link->dpcd_caps.fallback_formats.bits.dp_1024x768_60Hz_24bpp_support) + DC_LOG_DP2("\t1024x768@60Hz 24bpp fallback format supported"); + if (link->dpcd_caps.fallback_formats.raw == 0) { + DC_LOG_DP2("\tno supported fallback formats, assume 1920x1080@60Hz 24bpp is supported"); + link->dpcd_caps.fallback_formats.bits.dp_1920x1080_60Hz_24bpp_support = 1; + } + + core_link_read_dpcd(link, + DP_FEC_CAPABILITY_1, + &link->dpcd_caps.fec_cap1.raw, + sizeof(link->dpcd_caps.fec_cap1.raw)); + DC_LOG_DP2("FEC CAPABILITY 1 is read at link %d", link->link_index); + if (link->dpcd_caps.fec_cap1.bits.AGGREGATED_ERROR_COUNTERS_CAPABLE) + DC_LOG_DP2("\tFEC aggregated error counters are supported"); + } + + retrieve_cable_id(link); + dpcd_write_cable_id_to_dprx(link); + + /* Connectivity log: detection */ + CONN_DATA_DETECT(link, dpcd_data, sizeof(dpcd_data), "Rx Caps: "); + + return true; +} + +bool detect_dp_sink_caps(struct dc_link *link) +{ + return retrieve_link_cap(link); +} + +void detect_edp_sink_caps(struct dc_link *link) +{ + uint8_t supported_link_rates[16]; + uint32_t entry; + uint32_t link_rate_in_khz; + enum dc_link_rate link_rate = LINK_RATE_UNKNOWN; + uint8_t backlight_adj_cap; + uint8_t general_edp_cap; + + retrieve_link_cap(link); + link->dpcd_caps.edp_supported_link_rates_count = 0; + memset(supported_link_rates, 0, sizeof(supported_link_rates)); + + /* + * edp_supported_link_rates_count is only valid for eDP v1.4 or higher. + * Per VESA eDP spec, "The DPCD revision for eDP v1.4 is 13h" + */ + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_13 && + (link->panel_config.ilr.optimize_edp_link_rate || + link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN)) { + // Read DPCD 00010h - 0001Fh 16 bytes at one shot + core_link_read_dpcd(link, DP_SUPPORTED_LINK_RATES, + supported_link_rates, sizeof(supported_link_rates)); + + for (entry = 0; entry < 16; entry += 2) { + // DPCD register reports per-lane link rate = 16-bit link rate capability + // value X 200 kHz. Need multiplier to find link rate in kHz. + link_rate_in_khz = (supported_link_rates[entry+1] * 0x100 + + supported_link_rates[entry]) * 200; + + if (link_rate_in_khz != 0) { + link_rate = linkRateInKHzToLinkRateMultiplier(link_rate_in_khz); + link->dpcd_caps.edp_supported_link_rates[link->dpcd_caps.edp_supported_link_rates_count] = link_rate; + link->dpcd_caps.edp_supported_link_rates_count++; + + if (link->reported_link_cap.link_rate < link_rate) + link->reported_link_cap.link_rate = link_rate; + } + } + } + core_link_read_dpcd(link, DP_EDP_BACKLIGHT_ADJUSTMENT_CAP, + &backlight_adj_cap, sizeof(backlight_adj_cap)); + + link->dpcd_caps.dynamic_backlight_capable_edp = + (backlight_adj_cap & DP_EDP_DYNAMIC_BACKLIGHT_CAP) ? true:false; + + core_link_read_dpcd(link, DP_EDP_GENERAL_CAP_1, + &general_edp_cap, sizeof(general_edp_cap)); + + link->dpcd_caps.set_power_state_capable_edp = + (general_edp_cap & DP_EDP_SET_POWER_CAP) ? true:false; + + set_default_brightness_aux(link); + + core_link_read_dpcd(link, DP_EDP_DPCD_REV, + &link->dpcd_caps.edp_rev, + sizeof(link->dpcd_caps.edp_rev)); + /* + * PSR is only valid for eDP v1.3 or higher. + */ + if (link->dpcd_caps.edp_rev >= DP_EDP_13) { + core_link_read_dpcd(link, DP_PSR_SUPPORT, + &link->dpcd_caps.psr_info.psr_version, + sizeof(link->dpcd_caps.psr_info.psr_version)); + if (link->dpcd_caps.sink_dev_id == DP_BRANCH_DEVICE_ID_001CF8) + core_link_read_dpcd(link, DP_FORCE_PSRSU_CAPABILITY, + &link->dpcd_caps.psr_info.force_psrsu_cap, + sizeof(link->dpcd_caps.psr_info.force_psrsu_cap)); + core_link_read_dpcd(link, DP_PSR_CAPS, + &link->dpcd_caps.psr_info.psr_dpcd_caps.raw, + sizeof(link->dpcd_caps.psr_info.psr_dpcd_caps.raw)); + if (link->dpcd_caps.psr_info.psr_dpcd_caps.bits.Y_COORDINATE_REQUIRED) { + core_link_read_dpcd(link, DP_PSR2_SU_Y_GRANULARITY, + &link->dpcd_caps.psr_info.psr2_su_y_granularity_cap, + sizeof(link->dpcd_caps.psr_info.psr2_su_y_granularity_cap)); + } + } + + /* + * ALPM is only valid for eDP v1.4 or higher. + */ + if (link->dpcd_caps.dpcd_rev.raw >= DP_EDP_14) + core_link_read_dpcd(link, DP_RECEIVER_ALPM_CAP, + &link->dpcd_caps.alpm_caps.raw, + sizeof(link->dpcd_caps.alpm_caps.raw)); +} + +bool dc_link_dp_get_max_link_enc_cap(const struct dc_link *link, struct dc_link_settings *max_link_enc_cap) +{ + struct link_encoder *link_enc = NULL; + + if (!max_link_enc_cap) { + DC_LOG_ERROR("%s: Could not return max link encoder caps", __func__); + return false; + } + + link_enc = link_enc_cfg_get_link_enc(link); + ASSERT(link_enc); + + if (link_enc && link_enc->funcs->get_max_link_cap) { + link_enc->funcs->get_max_link_cap(link_enc, max_link_enc_cap); + return true; + } + + DC_LOG_ERROR("%s: Max link encoder caps unknown", __func__); + max_link_enc_cap->lane_count = 1; + max_link_enc_cap->link_rate = 6; + return false; +} + +const struct dc_link_settings *dc_link_get_link_cap( + const struct dc_link *link) +{ + if (link->preferred_link_setting.lane_count != LANE_COUNT_UNKNOWN && + link->preferred_link_setting.link_rate != LINK_RATE_UNKNOWN) + return &link->preferred_link_setting; + return &link->verified_link_cap; +} + +struct dc_link_settings dp_get_max_link_cap(struct dc_link *link) +{ + struct dc_link_settings max_link_cap = {0}; + enum dc_link_rate lttpr_max_link_rate; + enum dc_link_rate cable_max_link_rate; + struct link_encoder *link_enc = NULL; + + + link_enc = link_enc_cfg_get_link_enc(link); + ASSERT(link_enc); + + /* get max link encoder capability */ + if (link_enc) + link_enc->funcs->get_max_link_cap(link_enc, &max_link_cap); + + /* Lower link settings based on sink's link cap */ + if (link->reported_link_cap.lane_count < max_link_cap.lane_count) + max_link_cap.lane_count = + link->reported_link_cap.lane_count; + if (link->reported_link_cap.link_rate < max_link_cap.link_rate) + max_link_cap.link_rate = + link->reported_link_cap.link_rate; + if (link->reported_link_cap.link_spread < + max_link_cap.link_spread) + max_link_cap.link_spread = + link->reported_link_cap.link_spread; + + /* Lower link settings based on cable attributes + * Cable ID is a DP2 feature to identify max certified link rate that + * a cable can carry. The cable identification method requires both + * cable and display hardware support. Since the specs comes late, it is + * anticipated that the first round of DP2 cables and displays may not + * be fully compatible to reliably return cable ID data. Therefore the + * decision of our cable id policy is that if the cable can return non + * zero cable id data, we will take cable's link rate capability into + * account. However if we get zero data, the cable link rate capability + * is considered inconclusive. In this case, we will not take cable's + * capability into account to avoid of over limiting hardware capability + * from users. The max overall link rate capability is still determined + * after actual dp pre-training. Cable id is considered as an auxiliary + * method of determining max link bandwidth capability. + */ + cable_max_link_rate = get_cable_max_link_rate(link); + + if (!link->dc->debug.ignore_cable_id && + cable_max_link_rate != LINK_RATE_UNKNOWN && + cable_max_link_rate < max_link_cap.link_rate) + max_link_cap.link_rate = cable_max_link_rate; + + /* account for lttpr repeaters cap + * notes: repeaters do not snoop in the DPRX Capabilities addresses (3.6.3). + */ + if (dp_is_lttpr_present(link)) { + if (link->dpcd_caps.lttpr_caps.max_lane_count < max_link_cap.lane_count) + max_link_cap.lane_count = link->dpcd_caps.lttpr_caps.max_lane_count; + lttpr_max_link_rate = get_lttpr_max_link_rate(link); + + if (lttpr_max_link_rate < max_link_cap.link_rate) + max_link_cap.link_rate = lttpr_max_link_rate; + + DC_LOG_HW_LINK_TRAINING("%s\n Training with LTTPR, max_lane count %d max_link rate %d \n", + __func__, + max_link_cap.lane_count, + max_link_cap.link_rate); + } + + if (link_dp_get_encoding_format(&max_link_cap) == DP_128b_132b_ENCODING && + link->dc->debug.disable_uhbr) + max_link_cap.link_rate = LINK_RATE_HIGH3; + + return max_link_cap; +} + +static bool dp_verify_link_cap( + struct dc_link *link, + struct dc_link_settings *known_limit_link_setting, + int *fail_count) +{ + struct dc_link_settings cur_link_settings = {0}; + struct dc_link_settings max_link_settings = *known_limit_link_setting; + bool success = false; + bool skip_video_pattern; + enum clock_source_id dp_cs_id = get_clock_source_id(link); + enum link_training_result status = LINK_TRAINING_SUCCESS; + union hpd_irq_data irq_data; + struct link_resource link_res; + + memset(&irq_data, 0, sizeof(irq_data)); + cur_link_settings = max_link_settings; + + /* Grant extended timeout request */ + if (dp_is_lttpr_present(link) && link->dpcd_caps.lttpr_caps.max_ext_timeout > 0) { + uint8_t grant = link->dpcd_caps.lttpr_caps.max_ext_timeout & 0x80; + + core_link_write_dpcd(link, DP_PHY_REPEATER_EXTENDED_WAIT_TIMEOUT, &grant, sizeof(grant)); + } + + do { + if (!get_temp_dp_link_res(link, &link_res, &cur_link_settings)) + continue; + + skip_video_pattern = cur_link_settings.link_rate != LINK_RATE_LOW; + dp_enable_link_phy( + link, + &link_res, + link->connector_signal, + dp_cs_id, + &cur_link_settings); + + status = dp_perform_link_training( + link, + &link_res, + &cur_link_settings, + skip_video_pattern); + + if (status == LINK_TRAINING_SUCCESS) { + success = true; + udelay(1000); + if (dp_read_hpd_rx_irq_data(link, &irq_data) == DC_OK && + dc_link_check_link_loss_status( + link, + &irq_data)) + (*fail_count)++; + + } else { + (*fail_count)++; + } + dp_trace_lt_total_count_increment(link, true); + dp_trace_lt_result_update(link, status, true); + dp_disable_link_phy(link, &link_res, link->connector_signal); + } while (!success && decide_fallback_link_setting(link, + &max_link_settings, &cur_link_settings, status)); + + link->verified_link_cap = success ? + cur_link_settings : fail_safe_link_settings; + return success; +} + +bool dp_verify_link_cap_with_retries( + struct dc_link *link, + struct dc_link_settings *known_limit_link_setting, + int attempts) +{ + int i = 0; + bool success = false; + int fail_count = 0; + + dp_trace_detect_lt_init(link); + + if (link->link_enc && link->link_enc->features.flags.bits.DP_IS_USB_C && + link->dc->debug.usbc_combo_phy_reset_wa) + apply_usbc_combo_phy_reset_wa(link, known_limit_link_setting); + + dp_trace_set_lt_start_timestamp(link, false); + for (i = 0; i < attempts; i++) { + enum dc_connection_type type = dc_connection_none; + + memset(&link->verified_link_cap, 0, + sizeof(struct dc_link_settings)); + if (!dc_link_detect_sink(link, &type) || type == dc_connection_none) { + link->verified_link_cap = fail_safe_link_settings; + break; + } else if (dp_verify_link_cap(link, known_limit_link_setting, + &fail_count) && fail_count == 0) { + success = true; + break; + } + msleep(10); + } + + dp_trace_lt_fail_count_update(link, fail_count, true); + dp_trace_set_lt_end_timestamp(link, true); + + return success; +} |