diff options
Diffstat (limited to 'drivers/gpu/drm/rcar-du/rcar_du_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 39 |
1 files changed, 26 insertions, 13 deletions
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index 3619e1ddeb62..008e172ed43b 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -10,7 +10,6 @@ #include <linux/clk.h> #include <linux/mutex.h> #include <linux/platform_device.h> -#include <linux/sys_soc.h> #include <drm/drm_atomic.h> #include <drm/drm_atomic_helper.h> @@ -204,11 +203,6 @@ static void rcar_du_escr_divider(struct clk *clk, unsigned long target, } } -static const struct soc_device_attribute rcar_du_r8a7795_es1[] = { - { .soc_id = "r8a7795", .revision = "ES1.*" }, - { /* sentinel */ } -}; - static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) { const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode; @@ -238,7 +232,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) * no post-divider when a display PLL is present (as shown by * the workaround breaking HDMI output on M3-W during testing). */ - if (soc_device_match(rcar_du_r8a7795_es1)) { + if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY) { target *= 2; div = 1; } @@ -251,13 +245,30 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) | DPLLCR_N(dpll.n) | DPLLCR_M(dpll.m) | DPLLCR_STBY; - if (rcrtc->index == 1) + if (rcrtc->index == 1) { dpllcr |= DPLLCR_PLCS1 | DPLLCR_INCS_DOTCLKIN1; - else - dpllcr |= DPLLCR_PLCS0 + } else { + dpllcr |= DPLLCR_PLCS0_PLL | DPLLCR_INCS_DOTCLKIN0; + /* + * On ES2.x we have a single mux controlled via bit 21, + * which selects between DCLKIN source (bit 21 = 0) and + * a PLL source (bit 21 = 1), where the PLL is always + * PLL1. + * + * On ES1.x we have an additional mux, controlled + * via bit 20, for choosing between PLL0 (bit 20 = 0) + * and PLL1 (bit 20 = 1). We always want to use PLL1, + * so on ES1.x, in addition to setting bit 21, we need + * to set the bit 20. + */ + + if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PLL) + dpllcr |= DPLLCR_PLCS0_H3ES1X_PLL1; + } + rcar_du_group_write(rcrtc->group, DPLLCR, dpllcr); escr = ESCR_DCLKSEL_DCLKIN | div; @@ -287,10 +298,12 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) escr = params.escr; } - dev_dbg(rcrtc->dev->dev, "%s: ESCR 0x%08x\n", __func__, escr); + if (rcdu->info->gen < 4) { + dev_dbg(rcrtc->dev->dev, "%s: ESCR 0x%08x\n", __func__, escr); - rcar_du_crtc_write(rcrtc, rcrtc->index % 2 ? ESCR13 : ESCR02, escr); - rcar_du_crtc_write(rcrtc, rcrtc->index % 2 ? OTAR13 : OTAR02, 0); + rcar_du_crtc_write(rcrtc, rcrtc->index % 2 ? ESCR13 : ESCR02, escr); + rcar_du_crtc_write(rcrtc, rcrtc->index % 2 ? OTAR13 : OTAR02, 0); + } /* Signal polarities */ dsmr = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0) |