diff options
Diffstat (limited to 'drivers/media/pci/bt8xx/bttv-cards.c')
| -rw-r--r-- | drivers/media/pci/bt8xx/bttv-cards.c | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/drivers/media/pci/bt8xx/bttv-cards.c b/drivers/media/pci/bt8xx/bttv-cards.c index ca20b806e82d..c2b5ab287dd7 100644 --- a/drivers/media/pci/bt8xx/bttv-cards.c +++ b/drivers/media/pci/bt8xx/bttv-cards.c @@ -2011,7 +2011,7 @@ struct tvcard bttv_tvcards[] = { /* .audio_inputs= 0, */ .svhs = 9, .gpiomask = 0x00, - .gpiomask2 = 0x03, /* used for external vodeo mux */ + .gpiomask2 = 0x03, /* used for external video mux */ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ @@ -2025,7 +2025,7 @@ struct tvcard bttv_tvcards[] = { /* .audio_inputs= 0, */ .svhs = 9, .gpiomask = 0x00, - .gpiomask2 = 0x03, /* used for external vodeo mux */ + .gpiomask2 = 0x03, /* used for external video mux */ .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), .muxsel_hook = phytec_muxsel, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ @@ -2180,8 +2180,8 @@ struct tvcard bttv_tvcards[] = { [BTTV_BOARD_PICOLO_TETRA_CHIP] = { /*Eric DEBIEF <debief@telemsa.com>*/ /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ - /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ - /*0x79 in bttv.h*/ + /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/ + /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/ .name = "Euresys Picolo Tetra", .video_inputs = 4, /* .audio_inputs= 0, */ @@ -2506,7 +2506,7 @@ struct tvcard bttv_tvcards[] = { one external BNC composite input (mux 2) three internal composite inputs (unknown muxes) an 18-bit stereo A/D (CS5331A), which has: - one external stereo unblanced (RCA) audio connection + one external stereo unbalanced (RCA) audio connection one (or 3?) internal stereo balanced (XLR) audio connection input is selected via gpio to a 14052B mux (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) @@ -3924,7 +3924,7 @@ static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) u32 serial = 0; int cardid = -1; - /* This code will nevery actually get called in this case.... */ + /* This code will never actually get called in this case.... */ if (btv->c.type == BTTV_BOARD_UNKNOWN) { /* this might be an antique... check for MMAC label in eeprom */ if (!strncmp(ee, "MMAC", 4)) { @@ -4086,7 +4086,7 @@ static void avermedia_eeprom(struct bttv *btv) /* * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 * analog demod, which is not I2C controlled like the newer and more common - * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, + * TDA9887 series. Instead it has two tri-state input pins, S0 and S1, * that control the IF for the video and audio. Apparently, bttv GPIO * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). @@ -4144,7 +4144,7 @@ static void init_PXC200(struct bttv *btv) int tmp; u32 val; - /* Initialise GPIO-connevted stuff */ + /* Initialise GPIO-connected stuff */ gpio_inout(0xffffff, (1<<13)); gpio_write(0); udelay(3); @@ -4580,7 +4580,7 @@ static void xguard_muxsel(struct bttv *btv, unsigned int input) } static void picolo_tetra_init(struct bttv *btv) { - /*This is the video input redirection fonctionality : I DID NOT USED IT. */ + /*This is the video input redirection functionality : I DID NOT USE IT. */ btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ } @@ -4598,7 +4598,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] * * The IVC120G security card has 4 i2c controlled TDA8540 matrix - * swichers to provide 16 channels to MUX0. The TDA8540's have + * switchers to provide 16 channels to MUX0. The TDA8540's have * 4 independent outputs and as such the IVC120G also has the * optional "Monitor Out" bus. This allows the card to be looking * at one input while the monitor is looking at another. |