diff options
Diffstat (limited to 'drivers/mtd/spi-nor/core.h')
| -rw-r--r-- | drivers/mtd/spi-nor/core.h | 214 |
1 files changed, 214 insertions, 0 deletions
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h index 2bc620708d6f..3ce826b35ad1 100644 --- a/drivers/mtd/spi-nor/core.h +++ b/drivers/mtd/spi-nor/core.h @@ -11,6 +11,220 @@ #define SPI_NOR_MAX_ID_LEN 6 +enum spi_nor_option_flags { + SNOR_F_USE_FSR = BIT(0), + SNOR_F_HAS_SR_TB = BIT(1), + SNOR_F_NO_OP_CHIP_ERASE = BIT(2), + SNOR_F_READY_XSR_RDY = BIT(3), + SNOR_F_USE_CLSR = BIT(4), + SNOR_F_BROKEN_RESET = BIT(5), + SNOR_F_4B_OPCODES = BIT(6), + SNOR_F_HAS_4BAIT = BIT(7), + SNOR_F_HAS_LOCK = BIT(8), + SNOR_F_HAS_16BIT_SR = BIT(9), + SNOR_F_NO_READ_CR = BIT(10), + SNOR_F_HAS_SR_TB_BIT6 = BIT(11), +}; + +struct spi_nor_read_command { + u8 num_mode_clocks; + u8 num_wait_states; + u8 opcode; + enum spi_nor_protocol proto; +}; + +struct spi_nor_pp_command { + u8 opcode; + enum spi_nor_protocol proto; +}; + +enum spi_nor_read_command_index { + SNOR_CMD_READ, + SNOR_CMD_READ_FAST, + SNOR_CMD_READ_1_1_1_DTR, + + /* Dual SPI */ + SNOR_CMD_READ_1_1_2, + SNOR_CMD_READ_1_2_2, + SNOR_CMD_READ_2_2_2, + SNOR_CMD_READ_1_2_2_DTR, + + /* Quad SPI */ + SNOR_CMD_READ_1_1_4, + SNOR_CMD_READ_1_4_4, + SNOR_CMD_READ_4_4_4, + SNOR_CMD_READ_1_4_4_DTR, + + /* Octal SPI */ + SNOR_CMD_READ_1_1_8, + SNOR_CMD_READ_1_8_8, + SNOR_CMD_READ_8_8_8, + SNOR_CMD_READ_1_8_8_DTR, + + SNOR_CMD_READ_MAX +}; + +enum spi_nor_pp_command_index { + SNOR_CMD_PP, + + /* Quad SPI */ + SNOR_CMD_PP_1_1_4, + SNOR_CMD_PP_1_4_4, + SNOR_CMD_PP_4_4_4, + + /* Octal SPI */ + SNOR_CMD_PP_1_1_8, + SNOR_CMD_PP_1_8_8, + SNOR_CMD_PP_8_8_8, + + SNOR_CMD_PP_MAX +}; + +/** + * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type + * @size: the size of the sector/block erased by the erase type. + * JEDEC JESD216B imposes erase sizes to be a power of 2. + * @size_shift: @size is a power of 2, the shift is stored in + * @size_shift. + * @size_mask: the size mask based on @size_shift. + * @opcode: the SPI command op code to erase the sector/block. + * @idx: Erase Type index as sorted in the Basic Flash Parameter + * Table. It will be used to synchronize the supported + * Erase Types with the ones identified in the SFDP + * optional tables. + */ +struct spi_nor_erase_type { + u32 size; + u32 size_shift; + u32 size_mask; + u8 opcode; + u8 idx; +}; + +/** + * struct spi_nor_erase_command - Used for non-uniform erases + * The structure is used to describe a list of erase commands to be executed + * once we validate that the erase can be performed. The elements in the list + * are run-length encoded. + * @list: for inclusion into the list of erase commands. + * @count: how many times the same erase command should be + * consecutively used. + * @size: the size of the sector/block erased by the command. + * @opcode: the SPI command op code to erase the sector/block. + */ +struct spi_nor_erase_command { + struct list_head list; + u32 count; + u32 size; + u8 opcode; +}; + +/** + * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region + * @offset: the offset in the data array of erase region start. + * LSB bits are used as a bitmask encoding flags to + * determine if this region is overlaid, if this region is + * the last in the SPI NOR flash memory and to indicate + * all the supported erase commands inside this region. + * The erase types are sorted in ascending order with the + * smallest Erase Type size being at BIT(0). + * @size: the size of the region in bytes. + */ +struct spi_nor_erase_region { + u64 offset; + u64 size; +}; + +#define SNOR_ERASE_TYPE_MAX 4 +#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0) + +#define SNOR_LAST_REGION BIT(4) +#define SNOR_OVERLAID_REGION BIT(5) + +#define SNOR_ERASE_FLAGS_MAX 6 +#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0) + +/** + * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map + * @regions: array of erase regions. The regions are consecutive in + * address space. Walking through the regions is done + * incrementally. + * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform + * sector size (legacy implementation). + * @erase_type: an array of erase types shared by all the regions. + * The erase types are sorted in ascending order, with the + * smallest Erase Type size being the first member in the + * erase_type array. + * @uniform_erase_type: bitmask encoding erase types that can erase the + * entire memory. This member is completed at init by + * uniform and non-uniform SPI NOR flash memories if they + * support at least one erase type that can erase the + * entire memory. + */ +struct spi_nor_erase_map { + struct spi_nor_erase_region *regions; + struct spi_nor_erase_region uniform_region; + struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX]; + u8 uniform_erase_type; +}; + +/** + * struct spi_nor_locking_ops - SPI NOR locking methods + * @lock: lock a region of the SPI NOR. + * @unlock: unlock a region of the SPI NOR. + * @is_locked: check if a region of the SPI NOR is completely locked + */ +struct spi_nor_locking_ops { + int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len); + int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len); +}; + +/** + * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings. + * Includes legacy flash parameters and settings that can be overwritten + * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216 + * Serial Flash Discoverable Parameters (SFDP) tables. + * + * @size: the flash memory density in bytes. + * @page_size: the page size of the SPI NOR flash memory. + * @hwcaps: describes the read and page program hardware + * capabilities. + * @reads: read capabilities ordered by priority: the higher index + * in the array, the higher priority. + * @page_programs: page program capabilities ordered by priority: the + * higher index in the array, the higher priority. + * @erase_map: the erase map parsed from the SFDP Sector Map Parameter + * Table. + * @quad_enable: enables SPI NOR quad mode. + * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode. + * @convert_addr: converts an absolute address into something the flash + * will understand. Particularly useful when pagesize is + * not a power-of-2. + * @setup: configures the SPI NOR memory. Useful for SPI NOR + * flashes that have peculiarities to the SPI NOR standard + * e.g. different opcodes, specific address calculation, + * page size, etc. + * @locking_ops: SPI NOR locking methods. + */ +struct spi_nor_flash_parameter { + u64 size; + u32 page_size; + + struct spi_nor_hwcaps hwcaps; + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; + + struct spi_nor_erase_map erase_map; + + int (*quad_enable)(struct spi_nor *nor); + int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable); + u32 (*convert_addr)(struct spi_nor *nor, u32 addr); + int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps); + + const struct spi_nor_locking_ops *locking_ops; +}; + /** * struct spi_nor_fixups - SPI NOR fixup hooks * @default_init: called after default flash parameters init. Used to tweak |