diff options
Diffstat (limited to 'drivers/net/dsa/realtek/rtl8365mb.c')
-rw-r--r-- | drivers/net/dsa/realtek/rtl8365mb.c | 299 |
1 files changed, 177 insertions, 122 deletions
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c index 769f672e9128..da31d8b839ac 100644 --- a/drivers/net/dsa/realtek/rtl8365mb.c +++ b/drivers/net/dsa/realtek/rtl8365mb.c @@ -101,27 +101,14 @@ #include "realtek.h" -/* Chip-specific data and limits */ -#define RTL8365MB_CHIP_ID_8365MB_VC 0x6367 -#define RTL8365MB_CHIP_VER_8365MB_VC 0x0040 - -#define RTL8365MB_CHIP_ID_8367S 0x6367 -#define RTL8365MB_CHIP_VER_8367S 0x00A0 - -#define RTL8365MB_CHIP_ID_8367RB 0x6367 -#define RTL8365MB_CHIP_VER_8367RB 0x0020 - /* Family-specific data and limits */ #define RTL8365MB_PHYADDRMAX 7 #define RTL8365MB_NUM_PHYREGS 32 #define RTL8365MB_PHYREGMAX (RTL8365MB_NUM_PHYREGS - 1) -/* RTL8370MB and RTL8310SR, possibly suportable by this driver, have 10 ports */ -#define RTL8365MB_MAX_NUM_PORTS 10 +#define RTL8365MB_MAX_NUM_PORTS 11 +#define RTL8365MB_MAX_NUM_EXTINTS 3 #define RTL8365MB_LEARN_LIMIT_MAX 2112 -/* valid for all 6-port or less variants */ -static const int rtl8365mb_extint_port_map[] = { -1, -1, -1, -1, -1, -1, 1, 2, -1, -1}; - /* Chip identification registers */ #define RTL8365MB_CHIP_ID_REG 0x1300 @@ -201,7 +188,7 @@ static const int rtl8365mb_extint_port_map[] = { -1, -1, -1, -1, -1, -1, 1, 2, /* The PHY OCP addresses of PHY registers 0~31 start here */ #define RTL8365MB_PHY_OCP_ADDR_PHYREG_BASE 0xA400 -/* EXT interface port mode values - used in DIGITAL_INTERFACE_SELECT */ +/* External interface port mode values - used in DIGITAL_INTERFACE_SELECT */ #define RTL8365MB_EXT_PORT_MODE_DISABLE 0 #define RTL8365MB_EXT_PORT_MODE_RGMII 1 #define RTL8365MB_EXT_PORT_MODE_MII_MAC 2 @@ -217,19 +204,7 @@ static const int rtl8365mb_extint_port_map[] = { -1, -1, -1, -1, -1, -1, 1, 2, #define RTL8365MB_EXT_PORT_MODE_1000X 12 #define RTL8365MB_EXT_PORT_MODE_100FX 13 -/* Realtek docs and driver uses logic number as EXT_PORT0=16, EXT_PORT1=17, - * EXT_PORT2=18, to interact with switch ports. That logic number is internally - * converted to either a physical port number (0..9) or an external interface id (0..2), - * depending on which function was called. The external interface id is calculated as - * (ext_id=logic_port-15), while the logical to physical map depends on the chip id/version. - * - * EXT_PORT0 mentioned in datasheets and rtl8367c driver is used in this driver - * as extid==1, EXT_PORT2, mentioned in Realtek rtl8367c driver for 10-port switches, - * would have an ext_id of 3 (out of range for most extint macros) and ext_id 0 does - * not seem to be used as well for this family. - */ - -/* EXT interface mode configuration registers 0~1 */ +/* External interface mode configuration registers 0~1 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG0 0x1305 /* EXT1 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG1 0x13C3 /* EXT2 */ #define RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(_extint) \ @@ -241,7 +216,7 @@ static const int rtl8365mb_extint_port_map[] = { -1, -1, -1, -1, -1, -1, 1, 2, #define RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET(_extint) \ (((_extint) % 2) * 4) -/* EXT interface RGMII TX/RX delay configuration registers 0~2 */ +/* External interface RGMII TX/RX delay configuration registers 0~2 */ #define RTL8365MB_EXT_RGMXF_REG0 0x1306 /* EXT0 */ #define RTL8365MB_EXT_RGMXF_REG1 0x1307 /* EXT1 */ #define RTL8365MB_EXT_RGMXF_REG2 0x13C5 /* EXT2 */ @@ -258,7 +233,7 @@ static const int rtl8365mb_extint_port_map[] = { -1, -1, -1, -1, -1, -1, 1, 2, #define RTL8365MB_PORT_SPEED_100M 1 #define RTL8365MB_PORT_SPEED_1000M 2 -/* EXT interface force configuration registers 0~2 */ +/* External interface force configuration registers 0~2 */ #define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG0 0x1310 /* EXT0 */ #define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG1 0x1311 /* EXT1 */ #define RTL8365MB_DIGITAL_INTERFACE_FORCE_REG2 0x13C4 /* EXT2 */ @@ -490,6 +465,95 @@ static const struct rtl8365mb_jam_tbl_entry rtl8365mb_init_jam_common[] = { { 0x1D32, 0x0002 }, }; +enum rtl8365mb_phy_interface_mode { + RTL8365MB_PHY_INTERFACE_MODE_INVAL = 0, + RTL8365MB_PHY_INTERFACE_MODE_INTERNAL = BIT(0), + RTL8365MB_PHY_INTERFACE_MODE_MII = BIT(1), + RTL8365MB_PHY_INTERFACE_MODE_TMII = BIT(2), + RTL8365MB_PHY_INTERFACE_MODE_RMII = BIT(3), + RTL8365MB_PHY_INTERFACE_MODE_RGMII = BIT(4), + RTL8365MB_PHY_INTERFACE_MODE_SGMII = BIT(5), + RTL8365MB_PHY_INTERFACE_MODE_HSGMII = BIT(6), +}; + +/** + * struct rtl8365mb_extint - external interface info + * @port: the port with an external interface + * @id: the external interface ID, which is either 0, 1, or 2 + * @supported_interfaces: a bitmask of supported PHY interface modes + * + * Represents a mapping: port -> { id, supported_interfaces }. To be embedded + * in &struct rtl8365mb_chip_info for every port with an external interface. + */ +struct rtl8365mb_extint { + int port; + int id; + unsigned int supported_interfaces; +}; + +/** + * struct rtl8365mb_chip_info - static chip-specific info + * @name: human-readable chip name + * @chip_id: chip identifier + * @chip_ver: chip silicon revision + * @extints: available external interfaces + * @jam_table: chip-specific initialization jam table + * @jam_size: size of the chip's jam table + * + * These data are specific to a given chip in the family of switches supported + * by this driver. When adding support for another chip in the family, a new + * chip info should be added to the rtl8365mb_chip_infos array. + */ +struct rtl8365mb_chip_info { + const char *name; + u32 chip_id; + u32 chip_ver; + const struct rtl8365mb_extint extints[RTL8365MB_MAX_NUM_EXTINTS]; + const struct rtl8365mb_jam_tbl_entry *jam_table; + size_t jam_size; +}; + +/* Chip info for each supported switch in the family */ +#define PHY_INTF(_mode) (RTL8365MB_PHY_INTERFACE_MODE_ ## _mode) +static const struct rtl8365mb_chip_info rtl8365mb_chip_infos[] = { + { + .name = "RTL8365MB-VC", + .chip_id = 0x6367, + .chip_ver = 0x0040, + .extints = { + { 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) | + PHY_INTF(RMII) | PHY_INTF(RGMII) }, + }, + .jam_table = rtl8365mb_init_jam_8365mb_vc, + .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc), + }, + { + .name = "RTL8367S", + .chip_id = 0x6367, + .chip_ver = 0x00A0, + .extints = { + { 6, 1, PHY_INTF(SGMII) | PHY_INTF(HSGMII) }, + { 7, 2, PHY_INTF(MII) | PHY_INTF(TMII) | + PHY_INTF(RMII) | PHY_INTF(RGMII) }, + }, + .jam_table = rtl8365mb_init_jam_8365mb_vc, + .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc), + }, + { + .name = "RTL8367RB-VB", + .chip_id = 0x6367, + .chip_ver = 0x0020, + .extints = { + { 6, 1, PHY_INTF(MII) | PHY_INTF(TMII) | + PHY_INTF(RMII) | PHY_INTF(RGMII) }, + { 7, 2, PHY_INTF(MII) | PHY_INTF(TMII) | + PHY_INTF(RMII) | PHY_INTF(RGMII) }, + }, + .jam_table = rtl8365mb_init_jam_8365mb_vc, + .jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc), + }, +}; + enum rtl8365mb_stp_state { RTL8365MB_STP_STATE_DISABLED = 0, RTL8365MB_STP_STATE_BLOCKING = 1, @@ -559,33 +623,23 @@ struct rtl8365mb_port { }; /** - * struct rtl8365mb - private chip-specific driver data + * struct rtl8365mb - driver private data * @priv: pointer to parent realtek_priv data * @irq: registered IRQ or zero - * @chip_id: chip identifier - * @chip_ver: chip silicon revision - * @port_mask: mask of all ports - * @learn_limit_max: maximum number of L2 addresses the chip can learn + * @chip_info: chip-specific info about the attached switch * @cpu: CPU tagging and CPU port configuration for this chip * @mib_lock: prevent concurrent reads of MIB counters * @ports: per-port data - * @jam_table: chip-specific initialization jam table - * @jam_size: size of the chip's jam table * * Private data for this driver. */ struct rtl8365mb { struct realtek_priv *priv; int irq; - u32 chip_id; - u32 chip_ver; - u32 port_mask; - u32 learn_limit_max; + const struct rtl8365mb_chip_info *chip_info; struct rtl8365mb_cpu cpu; struct mutex mib_lock; struct rtl8365mb_port ports[RTL8365MB_MAX_NUM_PORTS]; - const struct rtl8365mb_jam_tbl_entry *jam_table; - size_t jam_size; }; static int rtl8365mb_phy_poll_busy(struct realtek_priv *priv) @@ -780,6 +834,26 @@ static int rtl8365mb_dsa_phy_write(struct dsa_switch *ds, int phy, int regnum, return rtl8365mb_phy_write(ds->priv, phy, regnum, val); } +static const struct rtl8365mb_extint * +rtl8365mb_get_port_extint(struct realtek_priv *priv, int port) +{ + struct rtl8365mb *mb = priv->chip_data; + int i; + + for (i = 0; i < RTL8365MB_MAX_NUM_EXTINTS; i++) { + const struct rtl8365mb_extint *extint = + &mb->chip_info->extints[i]; + + if (!extint->supported_interfaces) + continue; + + if (extint->port == port) + return extint; + } + + return NULL; +} + static enum dsa_tag_protocol rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port, enum dsa_tag_protocol mp) @@ -800,20 +874,17 @@ rtl8365mb_get_tag_protocol(struct dsa_switch *ds, int port, static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, phy_interface_t interface) { + const struct rtl8365mb_extint *extint = + rtl8365mb_get_port_extint(priv, port); struct device_node *dn; struct dsa_port *dp; int tx_delay = 0; int rx_delay = 0; - int ext_int; u32 val; int ret; - ext_int = rtl8365mb_extint_port_map[port]; - - if (ext_int <= 0) { - dev_err(priv->dev, "Port %d is not an external interface port\n", port); - return -EINVAL; - } + if (!extint) + return -ENODEV; dp = dsa_to_port(priv->ds, port); dn = dp->dn; @@ -847,7 +918,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, tx_delay = val / 2; else dev_warn(priv->dev, - "EXT interface TX delay must be 0 or 2 ns\n"); + "RGMII TX delay must be 0 or 2 ns\n"); } if (!of_property_read_u32(dn, "rx-internal-delay-ps", &val)) { @@ -857,11 +928,11 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, rx_delay = val; else dev_warn(priv->dev, - "EXT interface RX delay must be 0 to 2.1 ns\n"); + "RGMII RX delay must be 0 to 2.1 ns\n"); } ret = regmap_update_bits( - priv->map, RTL8365MB_EXT_RGMXF_REG(ext_int), + priv->map, RTL8365MB_EXT_RGMXF_REG(extint->id), RTL8365MB_EXT_RGMXF_TXDELAY_MASK | RTL8365MB_EXT_RGMXF_RXDELAY_MASK, FIELD_PREP(RTL8365MB_EXT_RGMXF_TXDELAY_MASK, tx_delay) | @@ -870,11 +941,11 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port, return ret; ret = regmap_update_bits( - priv->map, RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(ext_int), - RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(ext_int), + priv->map, RTL8365MB_DIGITAL_INTERFACE_SELECT_REG(extint->id), + RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_MASK(extint->id), RTL8365MB_EXT_PORT_MODE_RGMII << RTL8365MB_DIGITAL_INTERFACE_SELECT_MODE_OFFSET( - ext_int)); + extint->id)); if (ret) return ret; @@ -885,21 +956,18 @@ static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port, bool link, int speed, int duplex, bool tx_pause, bool rx_pause) { + const struct rtl8365mb_extint *extint = + rtl8365mb_get_port_extint(priv, port); u32 r_tx_pause; u32 r_rx_pause; u32 r_duplex; u32 r_speed; u32 r_link; - int ext_int; int val; int ret; - ext_int = rtl8365mb_extint_port_map[port]; - - if (ext_int <= 0) { - dev_err(priv->dev, "Port %d is not an external interface port\n", port); - return -EINVAL; - } + if (!extint) + return -ENODEV; if (link) { /* Force the link up with the desired configuration */ @@ -947,7 +1015,7 @@ static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port, r_duplex) | FIELD_PREP(RTL8365MB_DIGITAL_INTERFACE_FORCE_SPEED_MASK, r_speed); ret = regmap_write(priv->map, - RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(ext_int), + RTL8365MB_DIGITAL_INTERFACE_FORCE_REG(extint->id), val); if (ret) return ret; @@ -958,7 +1026,13 @@ static int rtl8365mb_ext_config_forcemode(struct realtek_priv *priv, int port, static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { - if (dsa_is_user_port(ds, port)) { + const struct rtl8365mb_extint *extint = + rtl8365mb_get_port_extint(ds->priv, port); + + config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000FD; + + if (!extint) { __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); @@ -967,12 +1041,16 @@ static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port, */ __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); - } else if (dsa_is_cpu_port(ds, port)) { - phy_interface_set_rgmii(config->supported_interfaces); + return; } - config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000FD; + /* Populate according to the modes supported by _this driver_, + * not necessarily the modes supported by the hardware, some of + * which remain unimplemented. + */ + + if (extint->supported_interfaces & RTL8365MB_PHY_INTERFACE_MODE_RGMII) + phy_interface_set_rgmii(config->supported_interfaces); } static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port, @@ -1091,15 +1169,13 @@ static void rtl8365mb_port_stp_state_set(struct dsa_switch *ds, int port, static int rtl8365mb_port_set_learning(struct realtek_priv *priv, int port, bool enable) { - struct rtl8365mb *mb = priv->chip_data; - /* Enable/disable learning by limiting the number of L2 addresses the * port can learn. Realtek documentation states that a limit of zero * disables learning. When enabling learning, set it to the chip's * maximum. */ return regmap_write(priv->map, RTL8365MB_LUT_PORT_LEARN_LIMIT_REG(port), - enable ? mb->learn_limit_max : 0); + enable ? RTL8365MB_LEARN_LIMIT_MAX : 0); } static int rtl8365mb_port_set_isolation(struct realtek_priv *priv, int port, @@ -1489,13 +1565,10 @@ static irqreturn_t rtl8365mb_irq(int irq, void *data) { struct realtek_priv *priv = data; unsigned long line_changes = 0; - struct rtl8365mb *mb; u32 stat; int line; int ret; - mb = priv->chip_data; - ret = rtl8365mb_get_and_clear_status_reg(priv, RTL8365MB_INTR_STATUS_REG, &stat); if (ret) @@ -1520,7 +1593,7 @@ static irqreturn_t rtl8365mb_irq(int irq, void *data) linkdown_ind = FIELD_GET(RTL8365MB_PORT_LINKDOWN_IND_MASK, val); - line_changes = (linkup_ind | linkdown_ind) & mb->port_mask; + line_changes = linkup_ind | linkdown_ind; } if (!line_changes) @@ -1792,14 +1865,17 @@ static int rtl8365mb_change_tag_protocol(struct dsa_switch *ds, static int rtl8365mb_switch_init(struct realtek_priv *priv) { struct rtl8365mb *mb = priv->chip_data; + const struct rtl8365mb_chip_info *ci; int ret; int i; + ci = mb->chip_info; + /* Do any chip-specific init jam before getting to the common stuff */ - if (mb->jam_table) { - for (i = 0; i < mb->jam_size; i++) { - ret = regmap_write(priv->map, mb->jam_table[i].reg, - mb->jam_table[i].val); + if (ci->jam_table) { + for (i = 0; i < ci->jam_size; i++) { + ret = regmap_write(priv->map, ci->jam_table[i].reg, + ci->jam_table[i].val); if (ret) return ret; } @@ -1972,6 +2048,7 @@ static int rtl8365mb_detect(struct realtek_priv *priv) u32 chip_id; u32 chip_ver; int ret; + int i; ret = rtl8365mb_get_chip_id_and_ver(priv->map, &chip_id, &chip_ver); if (ret) { @@ -1980,54 +2057,32 @@ static int rtl8365mb_detect(struct realtek_priv *priv) return ret; } - switch (chip_id) { - case RTL8365MB_CHIP_ID_8365MB_VC: - switch (chip_ver) { - case RTL8365MB_CHIP_VER_8365MB_VC: - dev_info(priv->dev, - "found an RTL8365MB-VC switch (ver=0x%04x)\n", - chip_ver); - break; - case RTL8365MB_CHIP_VER_8367RB: - dev_info(priv->dev, - "found an RTL8367RB-VB switch (ver=0x%04x)\n", - chip_ver); - break; - case RTL8365MB_CHIP_VER_8367S: - dev_info(priv->dev, - "found an RTL8367S switch (ver=0x%04x)\n", - chip_ver); + for (i = 0; i < ARRAY_SIZE(rtl8365mb_chip_infos); i++) { + const struct rtl8365mb_chip_info *ci = &rtl8365mb_chip_infos[i]; + + if (ci->chip_id == chip_id && ci->chip_ver == chip_ver) { + mb->chip_info = ci; break; - default: - dev_err(priv->dev, "unrecognized switch version (ver=0x%04x)", - chip_ver); - return -ENODEV; } + } - priv->num_ports = RTL8365MB_MAX_NUM_PORTS; - - mb->priv = priv; - mb->chip_id = chip_id; - mb->chip_ver = chip_ver; - mb->port_mask = GENMASK(priv->num_ports - 1, 0); - mb->learn_limit_max = RTL8365MB_LEARN_LIMIT_MAX; - mb->jam_table = rtl8365mb_init_jam_8365mb_vc; - mb->jam_size = ARRAY_SIZE(rtl8365mb_init_jam_8365mb_vc); - - mb->cpu.trap_port = RTL8365MB_MAX_NUM_PORTS; - mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL; - mb->cpu.position = RTL8365MB_CPU_POS_AFTER_SA; - mb->cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES; - mb->cpu.format = RTL8365MB_CPU_FORMAT_8BYTES; - - break; - default: + if (!mb->chip_info) { dev_err(priv->dev, - "found an unknown Realtek switch (id=0x%04x, ver=0x%04x)\n", - chip_id, chip_ver); + "unrecognized switch (id=0x%04x, ver=0x%04x)", chip_id, + chip_ver); return -ENODEV; } + dev_info(priv->dev, "found an %s switch\n", mb->chip_info->name); + + priv->num_ports = RTL8365MB_MAX_NUM_PORTS; + mb->priv = priv; + mb->cpu.trap_port = RTL8365MB_MAX_NUM_PORTS; + mb->cpu.insert = RTL8365MB_CPU_INSERT_TO_ALL; + mb->cpu.position = RTL8365MB_CPU_POS_AFTER_SA; + mb->cpu.rx_length = RTL8365MB_CPU_RXLEN_64BYTES; + mb->cpu.format = RTL8365MB_CPU_FORMAT_8BYTES; + return 0; } |