diff options
Diffstat (limited to 'drivers/net/ethernet/amazon/ena/ena_com.h')
| -rw-r--r-- | drivers/net/ethernet/amazon/ena/ena_com.h | 80 |
1 files changed, 41 insertions, 39 deletions
diff --git a/drivers/net/ethernet/amazon/ena/ena_com.h b/drivers/net/ethernet/amazon/ena/ena_com.h index 469f298199a7..bc187adf54e4 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.h +++ b/drivers/net/ethernet/amazon/ena/ena_com.h @@ -54,9 +54,9 @@ #undef pr_fmt #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#define ENA_MAX_NUM_IO_QUEUES 128U +#define ENA_MAX_NUM_IO_QUEUES 128U /* We need to queues for each IO (on for Tx and one for Rx) */ -#define ENA_TOTAL_NUM_QUEUES (2 * (ENA_MAX_NUM_IO_QUEUES)) +#define ENA_TOTAL_NUM_QUEUES (2 * (ENA_MAX_NUM_IO_QUEUES)) #define ENA_MAX_HANDLERS 256 @@ -73,13 +73,15 @@ /*****************************************************************************/ /* ENA adaptive interrupt moderation settings */ -#define ENA_INTR_INITIAL_TX_INTERVAL_USECS 64 -#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 0 -#define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1 +#define ENA_INTR_INITIAL_TX_INTERVAL_USECS 64 +#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 0 +#define ENA_DEFAULT_INTR_DELAY_RESOLUTION 1 -#define ENA_HW_HINTS_NO_TIMEOUT 0xFFFF +#define ENA_HASH_KEY_SIZE 40 -#define ENA_FEATURE_MAX_QUEUE_EXT_VER 1 +#define ENA_HW_HINTS_NO_TIMEOUT 0xFFFF + +#define ENA_FEATURE_MAX_QUEUE_EXT_VER 1 struct ena_llq_configurations { enum ena_admin_llq_header_location llq_header_location; @@ -237,6 +239,7 @@ struct ena_com_stats_admin { struct ena_com_admin_queue { void *q_dmadev; + struct ena_com_dev *ena_dev; spinlock_t q_lock; /* spinlock for the admin queue */ struct ena_comp_ctx *comp_ctx; @@ -349,6 +352,8 @@ struct ena_com_dev { struct ena_intr_moder_entry *intr_moder_tbl; struct ena_com_llq_info llq_info; + + u32 ena_min_poll_delay_us; }; struct ena_com_dev_get_features_ctx { @@ -393,7 +398,7 @@ struct ena_aenq_handlers { */ int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev); -/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism +/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism * @ena_dev: ENA communication layer struct * @readless_supported: readless mode (enable/disable) */ @@ -501,18 +506,6 @@ bool ena_com_get_admin_running_state(struct ena_com_dev *ena_dev); */ void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling); -/* ena_com_set_admin_polling_mode - Get the admin completion queue polling mode - * @ena_dev: ENA communication layer struct - * - * Get the admin completion mode. - * If polling mode is on, ena_com_execute_admin_command will perform a - * polling on the admin completion queue for the commands completion, - * otherwise it will wait on wait event. - * - * @return state - */ -bool ena_com_get_ena_admin_polling_mode(struct ena_com_dev *ena_dev); - /* ena_com_set_admin_auto_polling_mode - Enable autoswitch to polling mode * @ena_dev: ENA communication layer struct * @polling: Enable/Disable polling mode @@ -527,7 +520,7 @@ void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev, /* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler * @ena_dev: ENA communication layer struct * - * This method go over the admin completion queue and wake up all the pending + * This method goes over the admin completion queue and wakes up all the pending * threads that wait on the commands wait event. * * @note: Should be called after MSI-X interrupt. @@ -537,7 +530,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev); /* ena_com_aenq_intr_handler - AENQ interrupt handler * @ena_dev: ENA communication layer struct * - * This method go over the async event notification queue and call the proper + * This method goes over the async event notification queue and calls the proper * aenq handler. */ void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data); @@ -554,14 +547,14 @@ void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev); /* ena_com_wait_for_abort_completion - Wait for admin commands abort. * @ena_dev: ENA communication layer struct * - * This method wait until all the outstanding admin commands will be completed. + * This method waits until all the outstanding admin commands are completed. */ void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev); /* ena_com_validate_version - Validate the device parameters * @ena_dev: ENA communication layer struct * - * This method validate the device parameters are the same as the saved + * This method verifies the device parameters are the same as the saved * parameters in ena_dev. * This method is useful after device reset, to validate the device mac address * and the device offloads are the same as before the reset. @@ -695,23 +688,32 @@ int ena_com_fill_hash_function(struct ena_com_dev *ena_dev, */ int ena_com_set_hash_function(struct ena_com_dev *ena_dev); -/* ena_com_get_hash_function - Retrieve the hash function and the hash key - * from the device. +/* ena_com_get_hash_function - Retrieve the hash function from the device. * @ena_dev: ENA communication layer struct * @func: hash function - * @key: hash key * - * Retrieve the hash function and the hash key from the device. + * Retrieve the hash function from the device. * - * @note: If the caller called ena_com_fill_hash_function but didn't flash + * @note: If the caller called ena_com_fill_hash_function but didn't flush * it to the device, the new configuration will be lost. * * @return: 0 on Success and negative value otherwise. */ int ena_com_get_hash_function(struct ena_com_dev *ena_dev, - enum ena_admin_hash_functions *func, - u8 *key); + enum ena_admin_hash_functions *func); +/* ena_com_get_hash_key - Retrieve the hash key + * @ena_dev: ENA communication layer struct + * @key: hash key + * + * Retrieve the hash key. + * + * @note: If the caller called ena_com_fill_hash_key but didn't flush + * it to the device, the new configuration will be lost. + * + * @return: 0 on Success and negative value otherwise. + */ +int ena_com_get_hash_key(struct ena_com_dev *ena_dev, u8 *key); /* ena_com_fill_hash_ctrl - Fill RSS hash control * @ena_dev: ENA communication layer struct. * @proto: The protocol to configure. @@ -746,7 +748,7 @@ int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev); * * Retrieve the hash control from the device. * - * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash + * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush * it to the device, the new configuration will be lost. * * @return: 0 on Success and negative value otherwise. @@ -798,7 +800,7 @@ int ena_com_indirect_table_set(struct ena_com_dev *ena_dev); * * Retrieve the RSS indirection table from the device. * - * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flash + * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush * it to the device, the new configuration will be lost. * * @return: 0 on Success and negative value otherwise. @@ -824,14 +826,14 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev, /* ena_com_delete_debug_area - Free the debug area resources. * @ena_dev: ENA communication layer struct * - * Free the allocate debug area. + * Free the allocated debug area. */ void ena_com_delete_debug_area(struct ena_com_dev *ena_dev); /* ena_com_delete_host_info - Free the host info resources. * @ena_dev: ENA communication layer struct * - * Free the allocate host info. + * Free the allocated host info. */ void ena_com_delete_host_info(struct ena_com_dev *ena_dev); @@ -872,9 +874,9 @@ int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev, * @cmd_completion: command completion return value. * @cmd_comp_size: command completion size. - * Submit an admin command and then wait until the device will return a + * Submit an admin command and then wait until the device returns a * completion. - * The completion will be copyed into cmd_comp. + * The completion will be copied into cmd_comp. * * @return - 0 on success, negative value on failure. */ @@ -937,7 +939,7 @@ unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev * /* ena_com_config_dev_mode - Configure the placement policy of the device. * @ena_dev: ENA communication layer struct * @llq_features: LLQ feature descriptor, retrieve via - * ena_com_get_dev_attr_feat. + * ena_com_get_dev_attr_feat. * @ena_llq_config: The default driver LLQ parameters configurations */ int ena_com_config_dev_mode(struct ena_com_dev *ena_dev, @@ -963,7 +965,7 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d * @intr_reg: interrupt register to update. * @rx_delay_interval: Rx interval in usecs * @tx_delay_interval: Tx interval in usecs - * @unmask: unask enable/disable + * @unmask: unmask enable/disable * * Prepare interrupt update register with the supplied parameters. */ |