diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-config.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-config.h | 21 |
1 files changed, 12 insertions, 9 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-config.h b/drivers/net/wireless/intel/iwlwifi/iwl-config.h index dc32ccf95be5..2e9a85a9ee67 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-config.h @@ -287,27 +287,34 @@ struct iwl_pwr_tx_backoff { /** * struct iwl_cfg_trans - information needed to start the trans * - * These values cannot be changed when multiple configs are used for a - * single PCI ID, because they are needed before the HW REV or RFID - * can be read. + * These values are specific to the device ID and do not change when + * multiple configs are used for a single device ID. They values are + * used, among other things, to boot the NIC so that the HW REV or + * RFID can be read before deciding the remaining parameters to use. * * @base_params: pointer to basic parameters * @csr: csr flags and addresses that are different across devices * @device_family: the device family * @umac_prph_offset: offset to add to UMAC periphery address + * @xtal_latency: power up latency to get the xtal stabilized + * @extra_phy_cfg_flags: extra configuration flags to pass to the PHY * @rf_id: need to read rf_id to determine the firmware image * @use_tfh: use TFH * @gen2: 22000 and on transport operation * @mq_rx_supported: multi-queue rx support + * @integrated: discrete or integrated */ struct iwl_cfg_trans_params { const struct iwl_base_params *base_params; enum iwl_device_family device_family; u32 umac_prph_offset; + u32 xtal_latency; + u32 extra_phy_cfg_flags; u32 rf_id:1, use_tfh:1, gen2:1, mq_rx_supported:1, + integrated:1, bisr_workaround:1; }; @@ -374,7 +381,6 @@ struct iwl_fw_mon_regs { * @smem_offset: offset from which the SMEM begins * @smem_len: the length of SMEM * @vht_mu_mimo_supported: VHT MU-MIMO support - * @integrated: discrete or integrated * @cdb: CDB support * @nvm_type: see &enum iwl_nvm_type * @d3_debug_data_base_addr: base address where D3 debug data is stored @@ -413,7 +419,6 @@ struct iwl_cfg { u32 dccm2_len; u32 smem_offset; u32 smem_len; - u32 soc_latency; u16 nvm_ver; u16 nvm_calib_ver; u32 rx_with_siso_diversity:1, @@ -427,7 +432,6 @@ struct iwl_cfg { disable_dummy_notification:1, apmg_not_supported:1, vht_mu_mimo_supported:1, - integrated:1, cdb:1, dbgc_supported:1, uhb_supported:1; @@ -442,7 +446,6 @@ struct iwl_cfg { u8 ucode_api_min; u16 num_rbds; u32 min_umac_error_event_table; - u32 extra_phy_cfg_flags; u32 d3_debug_data_base_addr; u32 d3_debug_data_length; u32 min_txq_size; @@ -496,6 +499,8 @@ struct iwl_dev_info { * This list declares the config structures for all devices. */ extern const struct iwl_cfg_trans_params iwl9000_trans_cfg; +extern const struct iwl_cfg_trans_params iwl9560_trans_cfg; +extern const struct iwl_cfg_trans_params iwl9560_shared_clk_trans_cfg; extern const struct iwl_cfg_trans_params iwl_ax200_trans_cfg; extern const char iwl9162_name[]; extern const char iwl9260_name[]; @@ -586,7 +591,6 @@ extern const struct iwl_cfg iwl9260_2ac_cfg; extern const struct iwl_cfg iwl9260_2ac_160_cfg; extern const struct iwl_cfg iwl9260_killer_2ac_cfg; extern const struct iwl_cfg iwl9270_2ac_cfg; -extern const struct iwl_cfg iwl9560_2ac_cfg; extern const struct iwl_cfg iwl9560_2ac_cfg_quz_a0_jf_b0_soc; extern const struct iwl_cfg iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc; extern const struct iwl_cfg iwl9461_2ac_cfg_quz_a0_jf_b0_soc; @@ -596,7 +600,6 @@ extern const struct iwl_cfg iwl9560_killer_i_2ac_cfg_quz_a0_jf_b0_soc; extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_quz_a0_jf_b0_soc; extern const struct iwl_cfg iwl9461_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9462_2ac_cfg_shared_clk; -extern const struct iwl_cfg iwl9560_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9560_2ac_160_cfg_shared_clk; extern const struct iwl_cfg iwl9560_killer_2ac_cfg_shared_clk; extern const struct iwl_cfg iwl9560_killer_s_2ac_cfg_shared_clk; |