diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-trans.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-trans.h | 188 |
1 files changed, 35 insertions, 153 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h index 0ebfdbb22992..eb6842abb4c7 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h @@ -74,8 +74,9 @@ #include "iwl-debug.h" #include "iwl-config.h" -#include "iwl-fw.h" +#include "fw/img.h" #include "iwl-op-mode.h" +#include "fw/api.h" /** * DOC: Transport layer - what is it ? @@ -111,104 +112,6 @@ * 6) Eventually, the free function will be called. */ -/** - * DOC: Host command section - * - * A host command is a command issued by the upper layer to the fw. There are - * several versions of fw that have several APIs. The transport layer is - * completely agnostic to these differences. - * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), - */ -#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) -#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) -#define SEQ_TO_INDEX(s) ((s) & 0xff) -#define INDEX_TO_SEQ(i) ((i) & 0xff) -#define SEQ_RX_FRAME cpu_to_le16(0x8000) - -/* - * those functions retrieve specific information from - * the id field in the iwl_host_cmd struct which contains - * the command id, the group id and the version of the command - * and vice versa -*/ -static inline u8 iwl_cmd_opcode(u32 cmdid) -{ - return cmdid & 0xFF; -} - -static inline u8 iwl_cmd_groupid(u32 cmdid) -{ - return ((cmdid & 0xFF00) >> 8); -} - -static inline u8 iwl_cmd_version(u32 cmdid) -{ - return ((cmdid & 0xFF0000) >> 16); -} - -static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version) -{ - return opcode + (groupid << 8) + (version << 16); -} - -/* make u16 wide id out of u8 group and opcode */ -#define WIDE_ID(grp, opcode) ((grp << 8) | opcode) -#define DEF_ID(opcode) ((1 << 8) | (opcode)) - -/* due to the conversion, this group is special; new groups - * should be defined in the appropriate fw-api header files - */ -#define IWL_ALWAYS_LONG_GROUP 1 - -/** - * struct iwl_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 group_id; - /* - * The driver sets up the sequence number to values of its choosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 tfd index - position within TX queue - * 8:12 TX queue id - * 13:14 reserved - * 15 unsolicited RX or uCode-originated notification - */ - __le16 sequence; -} __packed; - -/** - * struct iwl_cmd_header_wide - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - * this is the wide version that contains more information about the command - * like length, version and command type - */ -struct iwl_cmd_header_wide { - u8 cmd; - u8 group_id; - __le16 sequence; - __le16 length; - u8 reserved; - u8 version; -} __packed; - #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ #define FH_RSCSR_FRAME_INVALID 0x55550000 #define FH_RSCSR_FRAME_ALIGN 0x40 @@ -308,7 +211,7 @@ struct iwl_device_cmd { #define IWL_MAX_CMD_TBS_PER_TFD 2 /** - * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command + * enum iwl_hcmd_dataflag - flag for each one of the chunks of the command * * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's * ring. The transport layer doesn't map the command's buffer to DMA, but @@ -419,7 +322,8 @@ enum iwl_d3_status { * @STATUS_DEVICE_ENABLED: APM is enabled * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up) * @STATUS_INT_ENABLED: interrupts are enabled - * @STATUS_RFKILL: the HW RFkill switch is in KILL position + * @STATUS_RFKILL_HW: the actual HW state of the RF-kill switch + * @STATUS_RFKILL_OPMODE: RF-kill state reported to opmode * @STATUS_FW_ERROR: the fw is in error state * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands * are sent @@ -431,7 +335,8 @@ enum iwl_trans_status { STATUS_DEVICE_ENABLED, STATUS_TPOWER_PMI, STATUS_INT_ENABLED, - STATUS_RFKILL, + STATUS_RFKILL_HW, + STATUS_RFKILL_OPMODE, STATUS_FW_ERROR, STATUS_TRANS_GOING_IDLE, STATUS_TRANS_IDLE, @@ -533,44 +438,6 @@ struct iwl_trans_txq_scd_cfg { int frame_limit; }; -/* Available options for &struct iwl_tx_queue_cfg_cmd */ -enum iwl_tx_queue_cfg_actions { - TX_QUEUE_CFG_ENABLE_QUEUE = BIT(0), - TX_QUEUE_CFG_TFD_SHORT_FORMAT = BIT(1), -}; - -/** - * struct iwl_tx_queue_cfg_cmd - txq hw scheduler config command - * @sta_id: station id - * @tid: tid of the queue - * @flags: Bit 0 - on enable, off - disable, Bit 1 - short TFD format - * @cb_size: size of TFD cyclic buffer. Value is exponent - 3. - * Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs) - * @byte_cnt_addr: address of byte count table - * @tfdq_addr: address of TFD circular buffer - */ -struct iwl_tx_queue_cfg_cmd { - u8 sta_id; - u8 tid; - __le16 flags; - __le32 cb_size; - __le64 byte_cnt_addr; - __le64 tfdq_addr; -} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */ - -/** - * struct iwl_tx_queue_cfg_rsp - response to txq hw scheduler config - * @queue_number: queue number assigned to this RA -TID - * @flags: set on failure - * @write_pointer: initial value for write pointer - */ -struct iwl_tx_queue_cfg_rsp { - __le16 queue_number; - __le16 flags; - __le16 write_pointer; - __le16 reserved; -} __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */ - /** * struct iwl_trans_ops - transport specific operations * @@ -615,11 +482,14 @@ struct iwl_tx_queue_cfg_rsp { * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before * this one. The op_mode must not configure the HCMD queue. The scheduler * configuration may be %NULL, in which case the hardware will not be - * configured. May sleep. + * configured. If true is returned, the operation mode needs to increment + * the sequence number of the packets routed to this queue because of a + * hardware scheduler bug. May sleep. * @txq_disable: de-configure a Tx queue to send AMPDUs * Must be atomic * @txq_set_shared_mode: change Tx queue shared/unshared marking - * @wait_tx_queue_empty: wait until tx queues are empty. May sleep. + * @wait_tx_queues_empty: wait until tx queues are empty. May sleep. + * @wait_txq_empty: wait until specific tx queue is empty. May sleep. * @freeze_txq_timer: prevents the timer of the queue from firing until the * queue is set to awake. Must be atomic. * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note @@ -676,7 +546,7 @@ struct iwl_trans_ops { void (*reclaim)(struct iwl_trans *trans, int queue, int ssn, struct sk_buff_head *skbs); - void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn, + bool (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout); void (*txq_disable)(struct iwl_trans *trans, int queue, @@ -692,6 +562,7 @@ struct iwl_trans_ops { bool shared); int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm); + int (*wait_txq_empty)(struct iwl_trans *trans, int queue); void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs, bool freeze); void (*block_txq_ptrs)(struct iwl_trans *trans, bool block); @@ -1041,13 +912,7 @@ iwl_trans_dump_data(struct iwl_trans *trans, static inline struct iwl_device_cmd * iwl_trans_alloc_tx_cmd(struct iwl_trans *trans) { - struct iwl_device_cmd *dev_cmd_ptr = - kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC); - - if (unlikely(dev_cmd_ptr == NULL)) - return NULL; - - return dev_cmd_ptr; + return kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC); } int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd); @@ -1089,7 +954,7 @@ static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue, trans->ops->txq_disable(trans, queue, configure_scd); } -static inline void +static inline bool iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn, const struct iwl_trans_txq_scd_cfg *cfg, unsigned int queue_wdg_timeout) @@ -1098,10 +963,11 @@ iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn, if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); - return; + return false; } - trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout); + return trans->ops->txq_enable(trans, queue, ssn, + cfg, queue_wdg_timeout); } static inline void @@ -1198,6 +1064,9 @@ static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans, static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans, u32 txqs) { + if (WARN_ON_ONCE(!trans->ops->wait_tx_queues_empty)) + return -ENOTSUPP; + if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); return -EIO; @@ -1206,6 +1075,19 @@ static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans, return trans->ops->wait_tx_queues_empty(trans, txqs); } +static inline int iwl_trans_wait_txq_empty(struct iwl_trans *trans, int queue) +{ + if (WARN_ON_ONCE(!trans->ops->wait_txq_empty)) + return -ENOTSUPP; + + if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) { + IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state); + return -EIO; + } + + return trans->ops->wait_txq_empty(trans, queue); +} + static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val) { trans->ops->write8(trans, ofs, val); |