diff options
Diffstat (limited to 'drivers/usb/serial/mos7720.c')
| -rw-r--r-- | drivers/usb/serial/mos7720.c | 75 |
1 files changed, 25 insertions, 50 deletions
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index f075121c6e32..a453965f9e9a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -973,11 +973,24 @@ static void mos7720_bulk_out_data_callback(struct urb *urb) tty_port_tty_wakeup(&mos7720_port->port->port); } -static int mos77xx_calc_num_ports(struct usb_serial *serial) +static int mos77xx_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) { u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); - if (product == MOSCHIP_DEVICE_ID_7715) + + if (product == MOSCHIP_DEVICE_ID_7715) { + /* + * The 7715 uses the first bulk in/out endpoint pair for the + * parallel port, and the second for the serial port. We swap + * the endpoint descriptors here so that the the first and + * only registered port structure uses the serial-port + * endpoints. + */ + swap(epds->bulk_in[0], epds->bulk_in[1]); + swap(epds->bulk_out[0], epds->bulk_out[1]); + return 1; + } return 2; } @@ -1395,7 +1408,7 @@ struct divisor_table_entry { /* Define table of divisors for moschip 7720 hardware * * These assume a 3.6864MHz crystal, the standard /16, and * * MCR.7 = 0. */ -static struct divisor_table_entry divisor_table[] = { +static const struct divisor_table_entry divisor_table[] = { { 50, 2304}, { 110, 1047}, /* 2094.545455 => 230450 => .0217 % over */ { 134, 857}, /* 1713.011152 => 230398.5 => .00065% under */ @@ -1675,7 +1688,6 @@ static void mos7720_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { int status; - unsigned int cflag; struct usb_serial *serial; struct moschip_port *mos7720_port; @@ -1691,16 +1703,6 @@ static void mos7720_set_termios(struct tty_struct *tty, return; } - dev_dbg(&port->dev, "setting termios - ASPIRE\n"); - - cflag = tty->termios.c_cflag; - - dev_dbg(&port->dev, "%s - cflag %08x iflag %08x\n", __func__, - tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); - - dev_dbg(&port->dev, "%s - old cflag %08x old iflag %08x\n", __func__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - /* change the port settings to the new ones specified */ change_port_settings(tty, mos7720_port, old_termios); @@ -1900,54 +1902,24 @@ static int mos7720_startup(struct usb_serial *serial) u16 product; int ret_val; - if (serial->num_bulk_in < 2 || serial->num_bulk_out < 2) { - dev_err(&serial->interface->dev, "missing bulk endpoints\n"); - return -ENODEV; - } - product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; - /* - * The 7715 uses the first bulk in/out endpoint pair for the parallel - * port, and the second for the serial port. Because the usbserial core - * assumes both pairs are serial ports, we must engage in a bit of - * subterfuge and swap the pointers for ports 0 and 1 in order to make - * port 0 point to the serial port. However, both moschip devices use a - * single interrupt-in endpoint for both ports (as mentioned a little - * further down), and this endpoint was assigned to port 0. So after - * the swap, we must copy the interrupt endpoint elements from port 1 - * (as newly assigned) to port 0, and null out port 1 pointers. - */ - if (product == MOSCHIP_DEVICE_ID_7715) { - struct usb_serial_port *tmp = serial->port[0]; - serial->port[0] = serial->port[1]; - serial->port[1] = tmp; - serial->port[0]->interrupt_in_urb = tmp->interrupt_in_urb; - serial->port[0]->interrupt_in_buffer = tmp->interrupt_in_buffer; - serial->port[0]->interrupt_in_endpointAddress = - tmp->interrupt_in_endpointAddress; - serial->port[1]->interrupt_in_urb = NULL; - serial->port[1]->interrupt_in_buffer = NULL; - - if (serial->port[0]->interrupt_in_urb) { - struct urb *urb = serial->port[0]->interrupt_in_urb; - - urb->complete = mos7715_interrupt_callback; - } - } - /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); -#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT if (product == MOSCHIP_DEVICE_ID_7715) { + struct urb *urb = serial->port[0]->interrupt_in_urb; + + urb->complete = mos7715_interrupt_callback; + +#ifdef CONFIG_USB_SERIAL_MOS7715_PARPORT ret_val = mos7715_parport_init(serial); if (ret_val < 0) return ret_val; - } #endif + } /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); if (ret_val) { @@ -2039,6 +2011,9 @@ static struct usb_serial_driver moschip7720_2port_driver = { }, .description = "Moschip 2 port adapter", .id_table = id_table, + .num_bulk_in = 2, + .num_bulk_out = 2, + .num_interrupt_in = 1, .calc_num_ports = mos77xx_calc_num_ports, .open = mos7720_open, .close = mos7720_close, |