diff options
Diffstat (limited to 'include/drm/drm_bridge.h')
| -rw-r--r-- | include/drm/drm_bridge.h | 503 |
1 files changed, 443 insertions, 60 deletions
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 2195daa289d2..4e418a29a9ff 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -32,12 +32,17 @@ #include <drm/drm_mode_object.h> #include <drm/drm_modes.h> +struct device_node; + struct drm_bridge; struct drm_bridge_timings; struct drm_connector; struct drm_display_info; +struct drm_minor; struct drm_panel; struct edid; +struct hdmi_codec_daifmt; +struct hdmi_codec_params; struct i2c_adapter; /** @@ -68,7 +73,7 @@ struct drm_bridge_funcs { * * Zero on success, error code on failure. */ - int (*attach)(struct drm_bridge *bridge, + int (*attach)(struct drm_bridge *bridge, struct drm_encoder *encoder, enum drm_bridge_attach_flags flags); /** @@ -104,7 +109,7 @@ struct drm_bridge_funcs { * Since this function is both called from the check phase of an atomic * commit, and the mode validation in the probe paths it is not allowed * to look at anything else but the passed-in mode, and validate it - * against configuration-invariant hardward constraints. Any further + * against configuration-invariant hardware constraints. Any further * limits which depend upon the configuration can only be checked in * @mode_fixup. * @@ -171,6 +176,11 @@ struct drm_bridge_funcs { * signals) feeding it is still running when this callback is called. * * The @disable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_disable. */ void (*disable)(struct drm_bridge *bridge); @@ -186,10 +196,15 @@ struct drm_bridge_funcs { * or &drm_encoder_helper_funcs.dpms hook. * * The bridge must assume that the display pipe (i.e. clocks and timing - * singals) feeding it is no longer running when this callback is + * signals) feeding it is no longer running when this callback is * called. * * The @post_disable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_post_disable. */ void (*post_disable)(struct drm_bridge *bridge); @@ -215,9 +230,9 @@ struct drm_bridge_funcs { * * NOTE: * - * If a need arises to store and access modes adjusted for other - * locations than the connection between the CRTC and the first bridge, - * the DRM framework will have to be extended with DRM bridge states. + * This is deprecated, do not use! + * New drivers shall set their mode in the + * &drm_bridge_funcs.atomic_enable operation. */ void (*mode_set)(struct drm_bridge *bridge, const struct drm_display_mode *mode, @@ -239,6 +254,11 @@ struct drm_bridge_funcs { * there is one) when this callback is called. * * The @pre_enable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_pre_enable. */ void (*pre_enable)(struct drm_bridge *bridge); @@ -259,6 +279,11 @@ struct drm_bridge_funcs { * chain if there is one. * * The @enable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_enable. */ void (*enable)(struct drm_bridge *bridge); @@ -277,16 +302,10 @@ struct drm_bridge_funcs { * not enable the display link feeding the next bridge in the chain (if * there is one) when this callback is called. * - * Note that this function will only be invoked in the context of an - * atomic commit. It will not be invoked from - * &drm_bridge_chain_pre_enable. It would be prudent to also provide an - * implementation of @pre_enable if you are expecting driver calls into - * &drm_bridge_chain_pre_enable. - * * The @atomic_pre_enable callback is optional. */ void (*atomic_pre_enable)(struct drm_bridge *bridge, - struct drm_bridge_state *old_bridge_state); + struct drm_atomic_state *state); /** * @atomic_enable: @@ -303,15 +322,10 @@ struct drm_bridge_funcs { * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * Note that this function will only be invoked in the context of an - * atomic commit. It will not be invoked from &drm_bridge_chain_enable. - * It would be prudent to also provide an implementation of @enable if - * you are expecting driver calls into &drm_bridge_chain_enable. - * * The @atomic_enable callback is optional. */ void (*atomic_enable)(struct drm_bridge *bridge, - struct drm_bridge_state *old_bridge_state); + struct drm_atomic_state *state); /** * @atomic_disable: * @@ -325,16 +339,10 @@ struct drm_bridge_funcs { * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * Note that this function will only be invoked in the context of an - * atomic commit. It will not be invoked from - * &drm_bridge_chain_disable. It would be prudent to also provide an - * implementation of @disable if you are expecting driver calls into - * &drm_bridge_chain_disable. - * * The @atomic_disable callback is optional. */ void (*atomic_disable)(struct drm_bridge *bridge, - struct drm_bridge_state *old_bridge_state); + struct drm_atomic_state *state); /** * @atomic_post_disable: @@ -350,17 +358,10 @@ struct drm_bridge_funcs { * signals) feeding it is no longer running when this callback is * called. * - * Note that this function will only be invoked in the context of an - * atomic commit. It will not be invoked from - * &drm_bridge_chain_post_disable. - * It would be prudent to also provide an implementation of - * @post_disable if you are expecting driver calls into - * &drm_bridge_chain_post_disable. - * * The @atomic_post_disable callback is optional. */ void (*atomic_post_disable)(struct drm_bridge *bridge, - struct drm_bridge_state *old_bridge_state); + struct drm_atomic_state *state); /** * @atomic_duplicate_state: @@ -427,11 +428,11 @@ struct drm_bridge_funcs { * * The returned array must be allocated with kmalloc() and will be * freed by the caller. If the allocation fails, NULL should be - * returned. num_output_fmts must be set to the returned array size. + * returned. num_input_fmts must be set to the returned array size. * Formats listed in the returned array should be listed in decreasing * preference order (the core will try all formats until it finds one * that works). When the format is not supported NULL should be - * returned and num_output_fmts should be set to 0. + * returned and num_input_fmts should be set to 0. * * This method is called on all elements of the bridge chain as part of * the bus format negotiation process that happens in @@ -542,7 +543,7 @@ struct drm_bridge_funcs { * The @get_modes callback is mostly intended to support non-probeable * displays such as many fixed panels. Bridges that support reading * EDID shall leave @get_modes unimplemented and implement the - * &drm_bridge_funcs->get_edid callback instead. + * &drm_bridge_funcs->edid_read callback instead. * * This callback is optional. Bridges that implement it shall set the * DRM_BRIDGE_OP_MODES flag in their &drm_bridge->ops. @@ -559,11 +560,11 @@ struct drm_bridge_funcs { struct drm_connector *connector); /** - * @get_edid: + * @edid_read: * - * Read and parse the EDID data of the connected display. + * Read the EDID data of the connected display. * - * The @get_edid callback is the preferred way of reporting mode + * The @edid_read callback is the preferred way of reporting mode * information for a display connected to the bridge output. Bridges * that support reading EDID shall implement this callback and leave * the @get_modes callback unimplemented. @@ -576,17 +577,18 @@ struct drm_bridge_funcs { * DRM_BRIDGE_OP_EDID flag in their &drm_bridge->ops. * * The connector parameter shall be used for the sole purpose of EDID - * retrieval and parsing, and shall not be stored internally by bridge - * drivers for future usage. + * retrieval, and shall not be stored internally by bridge drivers for + * future usage. * * RETURNS: * - * An edid structure newly allocated with kmalloc() (or similar) on - * success, or NULL otherwise. The caller is responsible for freeing - * the returned edid structure with kfree(). + * An edid structure newly allocated with drm_edid_alloc() or returned + * from drm_edid_read() family of functions on success, or NULL + * otherwise. The caller is responsible for freeing the returned edid + * structure with drm_edid_free(). */ - struct edid *(*get_edid)(struct drm_bridge *bridge, - struct drm_connector *connector); + const struct drm_edid *(*edid_read)(struct drm_bridge *bridge, + struct drm_connector *connector); /** * @hpd_notify: @@ -629,6 +631,177 @@ struct drm_bridge_funcs { * the DRM_BRIDGE_OP_HPD flag in their &drm_bridge->ops. */ void (*hpd_disable)(struct drm_bridge *bridge); + + /** + * @hdmi_tmds_char_rate_valid: + * + * Check whether a particular TMDS character rate is supported by the + * driver. + * + * This callback is optional and should only be implemented by the + * bridges that take part in the HDMI connector implementation. Bridges + * that implement it shall set the DRM_BRIDGE_OP_HDMI flag in their + * &drm_bridge->ops. + * + * Returns: + * + * Either &drm_mode_status.MODE_OK or one of the failure reasons + * in &enum drm_mode_status. + */ + enum drm_mode_status + (*hdmi_tmds_char_rate_valid)(const struct drm_bridge *bridge, + const struct drm_display_mode *mode, + unsigned long long tmds_rate); + + /** + * @hdmi_clear_infoframe: + * + * This callback clears the infoframes in the hardware during commit. + * It will be called multiple times, once for every disabled infoframe + * type. + * + * This callback is optional but it must be implemented by bridges that + * set the DRM_BRIDGE_OP_HDMI flag in their &drm_bridge->ops. + */ + int (*hdmi_clear_infoframe)(struct drm_bridge *bridge, + enum hdmi_infoframe_type type); + /** + * @hdmi_write_infoframe: + * + * Program the infoframe into the hardware. It will be called multiple + * times, once for every updated infoframe type. + * + * This callback is optional but it must be implemented by bridges that + * set the DRM_BRIDGE_OP_HDMI flag in their &drm_bridge->ops. + */ + int (*hdmi_write_infoframe)(struct drm_bridge *bridge, + enum hdmi_infoframe_type type, + const u8 *buffer, size_t len); + + /** + * @hdmi_audio_startup: + * + * Called when ASoC starts an audio stream setup. + * + * This callback is optional, it can be implemented by bridges that + * set the @DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*hdmi_audio_startup)(struct drm_connector *connector, + struct drm_bridge *bridge); + + /** + * @hdmi_audio_prepare: + * Configures HDMI-encoder for audio stream. Can be called multiple + * times for each setup. + * + * This callback is optional but it must be implemented by bridges that + * set the @DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*hdmi_audio_prepare)(struct drm_connector *connector, + struct drm_bridge *bridge, + struct hdmi_codec_daifmt *fmt, + struct hdmi_codec_params *hparms); + + /** + * @hdmi_audio_shutdown: + * + * Shut down the audio stream. + * + * This callback is optional but it must be implemented by bridges that + * set the @DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + void (*hdmi_audio_shutdown)(struct drm_connector *connector, + struct drm_bridge *bridge); + + /** + * @hdmi_audio_mute_stream: + * + * Mute/unmute HDMI audio stream. + * + * This callback is optional, it can be implemented by bridges that + * set the @DRM_BRIDGE_OP_HDMI_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*hdmi_audio_mute_stream)(struct drm_connector *connector, + struct drm_bridge *bridge, + bool enable, int direction); + + /** + * @dp_audio_startup: + * + * Called when ASoC starts a DisplayPort audio stream setup. + * + * This callback is optional, it can be implemented by bridges that + * set the @DRM_BRIDGE_OP_DP_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*dp_audio_startup)(struct drm_connector *connector, + struct drm_bridge *bridge); + + /** + * @dp_audio_prepare: + * Configures DisplayPort audio stream. Can be called multiple + * times for each setup. + * + * This callback is optional but it must be implemented by bridges that + * set the @DRM_BRIDGE_OP_DP_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*dp_audio_prepare)(struct drm_connector *connector, + struct drm_bridge *bridge, + struct hdmi_codec_daifmt *fmt, + struct hdmi_codec_params *hparms); + + /** + * @dp_audio_shutdown: + * + * Shut down the DisplayPort audio stream. + * + * This callback is optional but it must be implemented by bridges that + * set the @DRM_BRIDGE_OP_DP_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + void (*dp_audio_shutdown)(struct drm_connector *connector, + struct drm_bridge *bridge); + + /** + * @dp_audio_mute_stream: + * + * Mute/unmute DisplayPort audio stream. + * + * This callback is optional, it can be implemented by bridges that + * set the @DRM_BRIDGE_OP_DP_AUDIO flag in their &drm_bridge->ops. + * + * Returns: + * 0 on success, a negative error code otherwise + */ + int (*dp_audio_mute_stream)(struct drm_connector *connector, + struct drm_bridge *bridge, + bool enable, int direction); + + /** + * @debugfs_init: + * + * Allows bridges to create bridge-specific debugfs files. + */ + void (*debugfs_init)(struct drm_bridge *bridge, struct dentry *root); }; /** @@ -680,7 +853,7 @@ enum drm_bridge_ops { /** * @DRM_BRIDGE_OP_EDID: The bridge can retrieve the EDID of the display * connected to its output. Bridges that set this flag shall implement - * the &drm_bridge_funcs->get_edid callback. + * the &drm_bridge_funcs->edid_read callback. */ DRM_BRIDGE_OP_EDID = BIT(1), /** @@ -698,6 +871,42 @@ enum drm_bridge_ops { * this flag shall implement the &drm_bridge_funcs->get_modes callback. */ DRM_BRIDGE_OP_MODES = BIT(3), + /** + * @DRM_BRIDGE_OP_HDMI: The bridge provides HDMI connector operations, + * including infoframes support. Bridges that set this flag must + * implement the &drm_bridge_funcs->write_infoframe callback. + * + * Note: currently there can be at most one bridge in a chain that sets + * this bit. This is to simplify corresponding glue code in connector + * drivers. + */ + DRM_BRIDGE_OP_HDMI = BIT(4), + /** + * @DRM_BRIDGE_OP_HDMI_AUDIO: The bridge provides HDMI audio operations. + * Bridges that set this flag must implement the + * &drm_bridge_funcs->hdmi_audio_prepare and + * &drm_bridge_funcs->hdmi_audio_shutdown callbacks. + * + * Note: currently there can be at most one bridge in a chain that sets + * this bit. This is to simplify corresponding glue code in connector + * drivers. Also it is not possible to have a bridge in the chain that + * sets @DRM_BRIDGE_OP_DP_AUDIO if there is a bridge that sets this + * flag. + */ + DRM_BRIDGE_OP_HDMI_AUDIO = BIT(5), + /** + * @DRM_BRIDGE_OP_DP_AUDIO: The bridge provides DisplayPort audio operations. + * Bridges that set this flag must implement the + * &drm_bridge_funcs->dp_audio_prepare and + * &drm_bridge_funcs->dp_audio_shutdown callbacks. + * + * Note: currently there can be at most one bridge in a chain that sets + * this bit. This is to simplify corresponding glue code in connector + * drivers. Also it is not possible to have a bridge in the chain that + * sets @DRM_BRIDGE_OP_HDMI_AUDIO if there is a bridge that sets this + * flag. + */ + DRM_BRIDGE_OP_DP_AUDIO = BIT(6), }; /** @@ -712,10 +921,8 @@ struct drm_bridge { struct drm_encoder *encoder; /** @chain_node: used to form a bridge chain */ struct list_head chain_node; -#ifdef CONFIG_OF /** @of_node: device node pointer to the bridge */ struct device_node *of_node; -#endif /** @list: to keep track of all added bridges */ struct list_head list; /** @@ -726,6 +933,18 @@ struct drm_bridge { const struct drm_bridge_timings *timings; /** @funcs: control functions */ const struct drm_bridge_funcs *funcs; + + /** + * @container: Pointer to the private driver struct embedding this + * @struct drm_bridge. + */ + void *container; + + /** + * @refcount: reference count of users referencing this bridge. + */ + struct kref refcount; + /** @driver_private: pointer to the bridge driver's internal context */ void *driver_private; /** @ops: bitmask of operations supported by the bridge */ @@ -742,6 +961,19 @@ struct drm_bridge { */ bool interlace_allowed; /** + * @ycbcr_420_allowed: Indicate that the bridge can handle YCbCr 420 + * output. + */ + bool ycbcr_420_allowed; + /** + * @pre_enable_prev_first: The bridge requires that the prev + * bridge @pre_enable function is called before its @pre_enable, + * and conversely for post_disable. This is most frequently a + * requirement for DSI devices which need the host to be initialised + * before the peripheral. + */ + bool pre_enable_prev_first; + /** * @ddc: Associated I2C adapter for DDC access, if any. */ struct i2c_adapter *ddc; @@ -760,6 +992,57 @@ struct drm_bridge { * @hpd_cb. */ void *hpd_data; + + /** + * @vendor: Vendor of the product to be used for the SPD InfoFrame + * generation. This is required if @DRM_BRIDGE_OP_HDMI is set. + */ + const char *vendor; + + /** + * @product: Name of the product to be used for the SPD InfoFrame + * generation. This is required if @DRM_BRIDGE_OP_HDMI is set. + */ + const char *product; + + /** + * @supported_formats: Bitmask of @hdmi_colorspace listing supported + * output formats. This is only relevant if @DRM_BRIDGE_OP_HDMI is set. + */ + unsigned int supported_formats; + + /** + * @max_bpc: Maximum bits per char the HDMI bridge supports. Allowed + * values are 8, 10 and 12. This is only relevant if + * @DRM_BRIDGE_OP_HDMI is set. + */ + unsigned int max_bpc; + + /** + * @hdmi_audio_dev: device to be used as a parent for the HDMI Codec if + * either of @DRM_BRIDGE_OP_HDMI_AUDIO or @DRM_BRIDGE_OP_DP_AUDIO is set. + */ + struct device *hdmi_audio_dev; + + /** + * @hdmi_audio_max_i2s_playback_channels: maximum number of playback + * I2S channels for the @DRM_BRIDGE_OP_HDMI_AUDIO or + * @DRM_BRIDGE_OP_DP_AUDIO. + */ + int hdmi_audio_max_i2s_playback_channels; + + /** + * @hdmi_audio_spdif_playback: set if this bridge has S/PDIF playback + * port for @DRM_BRIDGE_OP_HDMI_AUDIO or @DRM_BRIDGE_OP_DP_AUDIO. + */ + unsigned int hdmi_audio_spdif_playback : 1; + + /** + * @hdmi_audio_dai_port: sound DAI port for either of + * @DRM_BRIDGE_OP_HDMI_AUDIO and @DRM_BRIDGE_OP_DP_AUDIO, -1 if it is + * not used. + */ + int hdmi_audio_dai_port; }; static inline struct drm_bridge * @@ -768,13 +1051,78 @@ drm_priv_to_bridge(struct drm_private_obj *priv) return container_of(priv, struct drm_bridge, base); } +struct drm_bridge *drm_bridge_get(struct drm_bridge *bridge); +void drm_bridge_put(struct drm_bridge *bridge); + +void *__devm_drm_bridge_alloc(struct device *dev, size_t size, size_t offset, + const struct drm_bridge_funcs *funcs); + +/** + * devm_drm_bridge_alloc - Allocate and initialize a bridge + * @dev: struct device of the bridge device + * @type: the type of the struct which contains struct &drm_bridge + * @member: the name of the &drm_bridge within @type + * @funcs: callbacks for this bridge + * + * The reference count of the returned bridge is initialized to 1. This + * reference will be automatically dropped via devm (by calling + * drm_bridge_put()) when @dev is removed. + * + * Returns: + * Pointer to new bridge, or ERR_PTR on failure. + */ +#define devm_drm_bridge_alloc(dev, type, member, funcs) \ + ((type *)__devm_drm_bridge_alloc(dev, sizeof(type), \ + offsetof(type, member), funcs)) + void drm_bridge_add(struct drm_bridge *bridge); +int devm_drm_bridge_add(struct device *dev, struct drm_bridge *bridge); void drm_bridge_remove(struct drm_bridge *bridge); -struct drm_bridge *of_drm_find_bridge(struct device_node *np); int drm_bridge_attach(struct drm_encoder *encoder, struct drm_bridge *bridge, struct drm_bridge *previous, enum drm_bridge_attach_flags flags); +#ifdef CONFIG_OF +struct drm_bridge *of_drm_find_bridge(struct device_node *np); +#else +static inline struct drm_bridge *of_drm_find_bridge(struct device_node *np) +{ + return NULL; +} +#endif + +/** + * drm_bridge_get_current_state() - Get the current bridge state + * @bridge: bridge object + * + * This function must be called with the modeset lock held. + * + * RETURNS: + * + * The current bridge state, or NULL if there is none. + */ +static inline struct drm_bridge_state * +drm_bridge_get_current_state(struct drm_bridge *bridge) +{ + if (!bridge) + return NULL; + + /* + * Only atomic bridges will have bridge->base initialized by + * drm_atomic_private_obj_init(), so we need to make sure we're + * working with one before we try to use the lock. + */ + if (!bridge->funcs || !bridge->funcs->atomic_reset) + return NULL; + + drm_modeset_lock_assert_held(&bridge->base.lock); + + if (!bridge->base.state) + return NULL; + + return drm_priv_to_bridge_state(bridge->base.state); +} + /** * drm_bridge_get_next_bridge() - Get the next bridge in the chain * @bridge: bridge object @@ -833,20 +1181,13 @@ drm_bridge_chain_get_first_bridge(struct drm_encoder *encoder) #define drm_for_each_bridge_in_chain(encoder, bridge) \ list_for_each_entry(bridge, &(encoder)->bridge_chain, chain_node) -bool drm_bridge_chain_mode_fixup(struct drm_bridge *bridge, - const struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode); enum drm_mode_status drm_bridge_chain_mode_valid(struct drm_bridge *bridge, const struct drm_display_info *info, const struct drm_display_mode *mode); -void drm_bridge_chain_disable(struct drm_bridge *bridge); -void drm_bridge_chain_post_disable(struct drm_bridge *bridge); void drm_bridge_chain_mode_set(struct drm_bridge *bridge, const struct drm_display_mode *mode, const struct drm_display_mode *adjusted_mode); -void drm_bridge_chain_pre_enable(struct drm_bridge *bridge); -void drm_bridge_chain_enable(struct drm_bridge *bridge); int drm_atomic_bridge_chain_check(struct drm_bridge *bridge, struct drm_crtc_state *crtc_state, @@ -871,8 +1212,8 @@ drm_atomic_helper_bridge_propagate_bus_fmt(struct drm_bridge *bridge, enum drm_connector_status drm_bridge_detect(struct drm_bridge *bridge); int drm_bridge_get_modes(struct drm_bridge *bridge, struct drm_connector *connector); -struct edid *drm_bridge_get_edid(struct drm_bridge *bridge, - struct drm_connector *connector); +const struct drm_edid *drm_bridge_edid_read(struct drm_bridge *bridge, + struct drm_connector *connector); void drm_bridge_hpd_enable(struct drm_bridge *bridge, void (*cb)(void *data, enum drm_connector_status status), @@ -882,16 +1223,58 @@ void drm_bridge_hpd_notify(struct drm_bridge *bridge, enum drm_connector_status status); #ifdef CONFIG_DRM_PANEL_BRIDGE +bool drm_bridge_is_panel(const struct drm_bridge *bridge); struct drm_bridge *drm_panel_bridge_add(struct drm_panel *panel); struct drm_bridge *drm_panel_bridge_add_typed(struct drm_panel *panel, u32 connector_type); void drm_panel_bridge_remove(struct drm_bridge *bridge); +int drm_panel_bridge_set_orientation(struct drm_connector *connector, + struct drm_bridge *bridge); struct drm_bridge *devm_drm_panel_bridge_add(struct device *dev, struct drm_panel *panel); struct drm_bridge *devm_drm_panel_bridge_add_typed(struct device *dev, struct drm_panel *panel, u32 connector_type); +struct drm_bridge *drmm_panel_bridge_add(struct drm_device *drm, + struct drm_panel *panel); struct drm_connector *drm_panel_bridge_connector(struct drm_bridge *bridge); +#else +static inline bool drm_bridge_is_panel(const struct drm_bridge *bridge) +{ + return false; +} + +static inline int drm_panel_bridge_set_orientation(struct drm_connector *connector, + struct drm_bridge *bridge) +{ + return -EINVAL; +} #endif +#if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL_BRIDGE) +struct drm_bridge *devm_drm_of_get_bridge(struct device *dev, struct device_node *node, + u32 port, u32 endpoint); +struct drm_bridge *drmm_of_get_bridge(struct drm_device *drm, struct device_node *node, + u32 port, u32 endpoint); +#else +static inline struct drm_bridge *devm_drm_of_get_bridge(struct device *dev, + struct device_node *node, + u32 port, + u32 endpoint) +{ + return ERR_PTR(-ENODEV); +} + +static inline struct drm_bridge *drmm_of_get_bridge(struct drm_device *drm, + struct device_node *node, + u32 port, + u32 endpoint) +{ + return ERR_PTR(-ENODEV); +} +#endif + +void drm_bridge_debugfs_params(struct dentry *root); +void drm_bridge_debugfs_encoder_params(struct dentry *root, struct drm_encoder *encoder); + #endif |